Order Change Management and direct manufacturing technique (SOBSL 52)

Dear all,
there is a statement in our SAP development team, that I can hardly believe:
Order Change Management and direct manufacturing technique are not fully supported in SAP standard (ECC6.0).
Can any body help me with this issue?
Kind Regards
Bernd

Dear Bernd,
please see SAP note 436928, which descriped the restrictions from OCM.
Regards,
Sabine

Similar Messages

Help required in OCM-Order change management

Hi All,
I have to implement the Order change managment. I did few setting which are required and than i created ECR using release key. but using OCM it tells me to first make the changes in MATERIAL BOM than using transaction COCM i can make the changes in required production order.
But my requirement is i want to change the Production BOM or Production routing directly without touching Material BOM .
As sometime it happens only 1 or 2 Order BOM s are need to be changed only not the Material bom. So i want to track the Changes made in Order using OCM.
What is the solution that i can change the Production Bom OR Production Routing directly using OCM and also how can i make the changes in Sales Order.
Pls do the needful.
Thanks
Ravi Khurana

Using Order Change Management (change management for production orders), it is possible to include existing procurement elements (production orders, planned orders, purchase orders) that are also affected by a change, in the change process.
The change process in OCM is based on Initiating Objects. These initiating object records refer to changes in sales orders or in master data, which, in turn, necessitate changes to production orders.
Thus, it is not possible to change the order directly using OCM.

Order change management

Hi all,
We have already implemented ECC 6.0 in a manufacturing project based industry. Now customer wants to track production order related changes. So we want to implement OCM.
Can anyboby please tell the detaild steps for implementing the OCM.
As per my knowledge i have already done necessary configurations. But when creating change master through CC01, in theentry screen, Function tab is not appearing. Can anybody tell the reason behind this.
Srijit.

Dear Srijit
Order Change Management is applicable for MTO/MTS Scenario,
First:-
In WorkScheduling View of Material Master (FERT/HALB or Any Defined for Production) you need to maintain "Overall Profile"
This Overall profile should be configured in SPRO > PRoduction>Shop Floor Control > Operations>Change Management for Production Orders-->Define Overall Change Profile.
Process of OCM follows this way:
Create a Change Number CC01 with Release Key
In Object Types select/tick "Actv", "object", "MgtRec",
You get the Change Number by Saving .
Use this Change Number to Change BOM or Routings
Then Release the Change Number useing Release Key till then you don't find the Change of BOM in Production Order.
Then go to Oder Change Process T Code :- COCM
Tick Change Number and Select the Change Number & Execute
Select the Production Order, click on Procurement element icon you get another screen select and execute again.
You get an Pop-Up screen. "Determine changes, Check changes, Change Original Order.
you see the changes in BOM for Production Order i.e. after COCM.
Then Confirm the Changes in Production Order then New changes will be Active in production Order.
Refer : http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PPSFC/PPSFC.pdf
Look at SAP note 436928, which descriped the restrictions from OCM if you are in ECC 6.0
Regards
JH

Order Change Management(OCM) in SAP

Dear All,
OCM is applicable in MTO Scenario.
Kindly let me know the steps involved to activate OCM n how to proceed
further.

Hi Bagchi,
Order Change Management is applicable for MTO/MTS Scenario,
First:-
In WorkScheduling View of Material Master (FERT/HALB or Any Defined for Production) you need to maintain "Overall Profile"
This Overall profile should be configured in SPRO > PRoduction>Shop Floor Control > Operations>Change Management for Production Orders-->Define Overall Change Profile.
Process of OCM follows this way:
Create a Change Number CC01 with Release Key
In Object Types select/tick "Actv", "object", "MgtRec",
You get the Change Number by Saving .
Use this Change Number to Change BOM or Routings
Then Release the Change Number useing Release Key till then you don't find the Change of BOM in Production Order.
Then go to Oder Change Process T Code :- COCM
Tick Change Number and Select the Change Number & Execute
Select the Production Order, click on Procurement element icon you get another screen select and execute again.
You get an Pop-Up screen. "Determine changes, Check changes, Change Original Order.
you see the changes in BOM for Production Order i.e. after COCM.
Then Confirm the Changes in Production Order then New changes will be Active in production Order.
Regards
Rehman
Reward Your Points If Useful

WHAT IS ORDER CHANGE MANAGEMENT(OCM)

HI GURUS,
CAN ANYBODY EXPLAIN ME WHAT IS OCM , HOW TO USE IT.
I UNDERSTAND THAT WITH OCM ANY CHANGES IN PROD ORDER GETS AUTOMATICALLY UPDATED IN MASTER BOM.
IF ANY SCREEN SHOTS ARE THERE IT WILL BE MORE EASY TO UNDERSTAND
HELPFUL ANSWER WILL BE GIVEN FULL MARKS.
THANKS AND REGARDS,

Hi,
Order Change Management ( OCM) is used for tracking changes made to the Production / Process Orders.You can see the Change Management records after activating OCM in Order Header Screen--->
Go to (Menu)--->Change Management.
For detailed procedure for OCM pls go through the following link :
[Order Change Management (OCM)|http://help.sap.com/saphelp_erp60_sp/helpdata/EN/41/3699761bc211d2b62b0000e8359890/content.htm]
Hope this helps.
Regards,
Tejas

Order Change Managment

I have a peculiar type of issue. The production order has the status CGFB- Confirm./goods mvmnt forbidden Which has been activated for the production order through Order change Management. But once this is being activated i am not able to do the delivery and order is blocked. So how should i deactivate this status in the production order. I have checked for the Material in the Work Scheduling view but no Overall profile is being usef for the Material. So i can i deactivate the Status CGFB in the production order set by the Order Change Managment.

REPORT ZPPSFC179 has been runned for the production order and the problem is not being solved
Message was edited by:
kumar jagadish
Message was edited by:
kumar jagadish

Webinar: Change Management and Transport in the Enterprise Portal

SAP NetWeaver Know-How Network Webinar:
Change Management and Transport in the Enterprise Portal
Wednesday 21 July 2004
11 a.m. EDT
On Wednesday 21 July, Scott Jones hosts the webinar titled Change Management and Transport in the Enterprise Portal as part of the ongoing SAP NetWeaver Know-How Network Webinar Series.
Heres how Scott describes his webinar presentation:
Change Management offers special challenges to administrators working in Enterprise Portal 6.0 SP2 environments. This talk provides recommendations and tools, and defines best practices and methods for the effective transport of Enterprise Portal content, with special attention to content dependencies, tracking, and troubleshooting. We'll also look forward to Change Management enhancements coming with Netweaver 04.
SDN invites you to post your questions to the presenter prior to the webinar and continue the online discussion afterward.
How to Participate
(Please go to the SDN Events page to see the article and download the PDF presentation)
Dial-in Information:
Date: Wednesday 21 July 2004
Time: 11 a.m. EDT
Within the U.S., call: +1.888.428.4473
Outside the U.S., call: +1.651.291.0618
Password: NetWeaver04
WebEx Information:
Topic: SAP NetWeaver Know-How Network
Date: Wednesday 21 July 2004
Time: 11 a.m. EDT
Meeting Number: 742391500
Meeting Password: netweaver04 (lowercase)
WebEx Link: sap.webex.com
Replay Information:
A recorded replay of this call will be available for approximately three months after the webinar. Access this recording by dialing the appropriate number and using the replay access code TBD.
Toll-free: +1.800.475.6701
International: +1.320.365.3844
About the SAP NetWeaver Know-How Webinar Series
The SAP NetWeaver Know-How Webinar Series is driven by the SAP NetWeaver Regional Implementation Group (RIG), part of the SAP Development organization. The mission of the SAP NetWeaver RIG is to enable customers, employees, and partners to successfully implement the SAP NetWeaver solution. This SAP RIG has expertise in BI, EP, XI, and WebAS. They contribute their implementation expertise to the SDN implementation forums as well as to the SAP NetWeaver Know-How Webinar Series.
Disclaimer
SDN is not responsible for any changes to the webinar schedule. The webinar schedule may be changed or cancelled without prior notice.

Hello,
In the intresting document I read that for the deployement the version number mentionned in the MANIFEST.MF is very important in a clustered evironment.
SAPnote 727180 - Version of PAR File in Manifest File
denies this.
Can you clear this out?
Kind Regards
Koen Van Loocke

Minimum steps required for Change Management and Incident management

Hello experts,
Does anyone have a check list of the absolute minimum steps required for getting Change Management and Incident management functioning in Solution Manager.
I just need it to function with creating changes and incidents and be able to assign them, change their status and close them.
The purpose is to get an idea if this is something for us to use. If we then find it useable, then we will go for a full scale implementation using official guides, education etc.
I just need an absolute minimum guide for demonstrating the functions, and if you guys have any recommendations, things we should pay special attention to or other experiences feel free to tell me.
Thanks in advance.
Regards,
Kenneth

Hi,
There are a number of Blogs in the SDN about Charm and ServiceDesk, explaining first steps and more.
Check these to start:
http://wiki.sdn.sap.com/wiki/display/SM/ChangeRequestManagement
The Complete ChaRM Solution
Change Request Management scenario: Usual questions and known errors
First steps to work with Change Request Management scenario in SAP Solution Manager 7.0
Regards,
Jan

What is the relationship between Change management and Issue tracking?

What is in general change management and what is issue tracking in a SAP point of view?

Hi
See this thread
Re: SAP APO
Additional inputs :
APO refers Advanced planned and optimizer
APO is similar to BW in the sense it is also a OLAP processor intended for reporting needs
Supply chain management
http://help.sap.com/saphelp_nw2004s/helpdata/en/25/79eb3cad744026e10000000a11405a/frameset.htm

Is there a relation between the Engineering Change Management and MM

Hi SAP MM Gurus,
Is there a relation between Engineering Change Management and Materials Management? I know we get the versions changes updated in Material Master. But do not know where is the origin for ECM. Step by step configuration is appreciable.
Thanking in Advance.
with regards
Ravi Babu

Hi ,
I have created an application and have created end users also who will be using this application. For each of these users i have to give access to application in such a way that they will be able to see only their area a work. So how do i do this ..this needs to done based on the login user_name..my question now is how or from where will i get the current session details like user_name, current session id ,current session date and time?
Thanks in advance,
Bhargavi

SRM: "Purchase Order Change Approval " and "Invoice Approval"

Hi,
I would like to know the availability and details of the backend services for "Purchase Order Change Approval " and "Invoice Approval".
Any pointers ?
regards
Sachin

I want to know what are the Backend services exposed for the following processes :
Purchase Order Change Approval in MM
and Invoice Approval.

Production Order Change Management

Hi ALL,
Dealy need of following.
How the changes to the production order can be viewed?
Is there any tcode to check this ?
Regards,
MHP

Dear Manish,
In a standard system it is not possible to track the changes made to a production order.
However, this can acheived in following ways.
1.We can develop a custom made report to track changes made to an order.Please check this with your ABAPer.
The overview of a report will be such that one can analyse the items added,deleted,new items inserted etc.
2.We will be able to achieve this by order change management.Refer the following link.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/41/3699761bc211d2b62b0000e8359890/frameset.htm
Regards,
Joseph Charles Vaikathussery

Difference Between Order Change Management & Engineering change Management

Dear,
What is the Difference Between Order Change Management & Engineering change Management ?

Hi,
ECM will help for Master data changes management.
OCM will help to manage changes in Transaction Data like Production Orders.
In brief,you have to first Create Change Number(part of ECM activity).then using that Change number, Master data(like BOM, Routing etc) has to be modified.
Then through OCM affected Transaction Data(like Production Orders) for each change number to be Processed.
Regards
R.Brahmankar

Order change management in Sales order(MTO Scenario)

Dear All,
Iam trying to map OCm functionality.How is 'Initial object' created based on changes to the direct assignment of change numbers by using direct assignment.What exactly is this?I have a sales order of 10 pc. against which a prod. order is also created for 10 pc. If there is a change in qty. of sales order from 10 pc. to 15 pc.Is it possible to refelect the same in existing Prod.Order using OCM or any other functionality.

Hi
order cahage management is tio track the changes made in production order .
It is no way to update the production order with changes made in sales order.
Regards
YMREDDY

Order Change Management activation

Hi Experts,
I want to activate the OCM (not in production server) to do some research. Can we deactivate it after making research.
Requirement is "to trace the list of production orders that have undergone quantity or dates change".
I would like to know whether it is difficult to deactivate like batch management.
Regards,
Jejesh

Dear,
It is not difficult to deactivate .
Steps,
In WorkScheduling View of Material Master (FERT/HALB or Any Defined for Production) you need to maintain "Overall Profile"
This Overall profile should be configured in SPRO > PRoduction>Shop Floor Control > Operations>Change Management for Production Orders-->Define Overall Change Profile.
Process of OCM follows this way:
Create a Change Number CC01 with Release Key
In Object Types select/tick "Actv", "object", "MgtRec",
You get the Change Number by Saving .
Use this Change Number to Change BOM or Routings
Then Release the Change Number useing Release Key till then you don't find the Change of BOM in Production Order.
Then go to Oder Change Process T Code :- COCM
Tick Change Number and Select the Change Number & Execute
Select the Production Order, click on Procurement element icon you get another screen select and execute again.
You get an Pop-Up screen. "Determine changes, Check changes, Change Original Order.
you see the changes in BOM for Production Order i.e. after COCM.
Then Confirm the Changes in Production Order then New changes will be Active in production Order.
Use COCM1 to find out the details or CO03--Extra --change
Please check link from page 399.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PPSFC/PPSFC.pdf
Hope it will help you.
Regards,
R.Brahmankar
Edited by: R Brahmankar on Nov 25, 2008 6:30 PM

Order Change Management and direct manufacturing technique (SOBSL 52)

Similar Messages

Maybe you are looking for