Order Status for partial return sales order

Dear All,
I am facing an issue at my client for which I am unable to find an appropriate reason.
We have done a complete Sales order cycle: S.Ord - Delivery and Invoice (100qty). Now the customer returns a certain part of materials delivered (say 30qty). We are creating a sales order for this 30qty and creating a delivery (for 30qty) and credit memo.
The problem here is that the status of returns delivery and credit memo is closed but the status of this returns order is shown as being processed and also is reflected in open orders report.
Can anyone please suggest why this is shown as being processed and not as closed despite the returns order being fully delivered and invoiced?
Note: the Completion rule for Item category of my returns order is set to B-Item is completed after full quantity has been referenced. Is it because of this? What would be the implications if I make this blank? Any other suggestions too would be highly appreciated
Thanks and Regards,
Rohan Gudavalli

This is b'coz, you create Credit memo with reference to Return Order (sales order), not from return delivery.
Further, if you check the standard copying control for VTFL ( Source: LR & Target: G2), you will not find config for this.
In standard, we have standard Billing doc type for this, that is RE - Credit for Returns (VOFA order-related billing VTFA).
So your standard process flow can be.
RE (Return Order)
-> LR (Return Delivery)
-> RE (Credit for Returns)
FYI, you can refer routine 2 - Ord-rel.credit memo from VOFM - Data transfer - Billing Document.
And that is the reason, why it is recommended to take Sales order as reference, instead of invoice.
Also, refer/check copying control config for VTFA for Return Order - RE to Credit for Returns - RE for Item category REN
Regards
JP

Similar Messages

Item status of a return sales order

Hi,
When I created a return sales order, the overall status for item is blank instead of the usual 'open', please indicate why, or where I should check to solve the problem.
Best Regards,
Helen

HI,
You can check the standard SAP tables for the document status.
VBUK - Header Status and Administrative Data
VBUP - Sales Document: Item Status
Hope this helps. Reward points if helpful.
Regards,
JLN

Urgent: How to copy multiple sales order items into a return sales order?

Dear developers,
I have a requirement to copy multiple sales order items into a single return sales order. For example, generated return sales order have 2 items, item 10 is created with reference to sales item 2610/10 and item 20 is created with reference to sales item 2611/20. What's more, when it happens, copy control should be taken care of. I know it is possible to create this kind of order by transaction. But how to do it in coding?
In current SAP release, there is only BAPI for creating with reference on 1:1 relationship which means copy one document to another but what I need is N:1 copy.
Any suggestion is high appreciated!!
BR,
Tony.

Hi ,
If you are creating sales order by using bapi then after calling bapi you can check import parameter SALESDOCUMENT in the bapi function module .If this parameter is not initial then sales order is created in this case you can create return order. If this import parameter is initial then sales order is not created and you cannot use return bapi function module.
Bapi is simple method than BDC.
In above case it is required to call BAPI_TRANSACTION_COMMIT after every successful sales order creation.
One more important point is you have to clear import parameter SALESDOCUMENT before calling sales order creation function module.
Thanks,
shyla

Minimum Order Value for an internet sales order in the webshop

Hi Guys,
I have a requrement of maintaining Minimum Order Value (MOV) for an order created in B2B webshop.
We have a condition type AMIZ which supports the same function in ECC. Will it support CRM too?
Current implementation is CRM 5.0 and the backend is R/3 4.7.
Thanks in advance,
Srinivas

Hi Srinivas,
I believe condition type AMIZ is available in CRM by standard. So its should support. Offcourse you ll have to assign the required requirement routines / condition base values.
Regards,
Gaurav Gera

Return Sales Order - And its Status

Hello Experts,
I have a question in the sales returns scenario.
Step 1: I Create a sales order ( With two items and delivery full ) and perform steps till billing ( invoice ).
Step 2: I Create Return sales order with reference to the first sales order but i take Only one item to return.
Now the status of the return sales order is Being Processed.
Step 3: I create a complete ( deliver full quantity of the item ) return delivery with reference to the return sales order and save the document. Now still the return sales order is in status Being Processed. Ideally i should have been Completed.
Step 4: I do the Goods receipt for the return delivery. Now also the status of the returns sales order is Being Processed instead of Completed
Kindly suggest any way to control the status of sales document or is this the ideal way( if so what's the functional purpose behind this ? ).
Is this because the billing block is still set in the Return sales order ?

Do you mean that only after credit memo creation or clearing of the credit memo from FI the status of return order is set to completed?
If this is an ideal scenario, in one of our systems the status of return sales order is set to completed immediately after returns delivery creation.
This behavior is same as that of normal sales order scenario, where the sales order status is set to completed once the delivery happens.
Kindly suggest, if there is any customizing to control the oeverall status update for specific sales order types or based on the type of sales scenario.

How to create delivery for return sales order?

Hello
I'd like to create a delivery for a return sales order, I used transaction VL01N to do that, but error message said no delivery-relevant item in this order. Can transaction VL01N be used for this step?
Nicole

Hi,
We can create the delivery in Return process with the transaction code VL01N as in the normal process. The following are some imp points we need to remember before performing returns order process.
1. We must make sure that a RE document type must be created and assigned .
2. Subsequent delivery document LR must be created and assigned to order type RE.
3. We must make sure whether the item for which we are creating a return delivery is it relevant for return process.Means that in the control data of item category REN 'Return item' indicator need to be activated.
Once all these settings are fulfilled then only we can perform the return delivery successfully.
If you are using any other documents rather than standard documents please check for those configuration settings that are applicable for return process.
Regards,
Revan

Cost of Inventory for Special Stock- (Sales Order Stock)

Dear All,
We manufactures "x" materail under Make to Stock and Make to Order Scenarios. We carried the standard cost estimate through CK11N and released through CK24N. There is a value of "X". Also we carried the sales order cost estimate that is value "Y". But we have observed the inventory value updated during confirmation of the production is at "Z" value. We have identified this Z value is the value of special stock previous periods.
I would like to know the procedure of valuation of inventory under scenarios
Regards
Anilkumar

Hi,
thanks for your info.
Can i say the changes will be done for those special stock.?
Actually my problem is related to a Return Sales order process where we need to change the MAP before DO and GI, otherwise the Material document would not capture the correct MAP during GI.
and the solution from the senior is select the variance "special stock -Sales order" and enter the sales doc# in MR21.
The problem that we are not yet having any special stock for this return Sales order, but this MR21 works for us and after that, the material document is able to capture the correct MAP.
Any idea what or where the MR21 is updating for the "Special Stock-Sales order" if we don't have any Sales order stock for the paticular sales document?

Enquiry on MR21 for Special stock Sales Order

HI Guru,
Can anyone please advice me the purpose of MR21 for special stock Sales order?
Where and which table would the program MR21 update?
thank you very much,
Chee Wee

Hi,
thanks for your info.
Can i say the changes will be done for those special stock.?
Actually my problem is related to a Return Sales order process where we need to change the MAP before DO and GI, otherwise the Material document would not capture the correct MAP during GI.
and the solution from the senior is select the variance "special stock -Sales order" and enter the sales doc# in MR21.
The problem that we are not yet having any special stock for this return Sales order, but this MR21 works for us and after that, the material document is able to capture the correct MAP.
Any idea what or where the MR21 is updating for the "Special Stock-Sales order" if we don't have any Sales order stock for the paticular sales document?

Return sales order based on sales order urgent..................

Hi,
I have to create return order for sales order. I am trying to create through bapi BAPI_SALESORDER_CREATEFROMDAT2. But i am getting eroor like "Unpermitted combination of business object BUS2032 and sales doc. category H".
If i create normal sales order it is creating sales order through this bapi.
In my case i have to create return sales order with reference to sales order. If any body is using this kind of sernario please send me with parameters..
Thanks in advance,
praveen

Hi Praveen,
The BAPI_SALESORDER_CREATEFROMDAT2 is orginally not designed for creating return sales orders.
Way around: create BIM processing or copy FM and remove the check (which is risky, since integrity is no longer guaranteed).
Regards,
Frank Umans

Idoc not created for a particular sales order

Hi,
For a particular sales order , idoc is not created .
The idoc has to be generated when we create a sales order ,
but for a particular sales order , the idoc is not generated when the sales order is created. The program is assigned in
nace for output type zd00.
RSNASTED is the program which triggers the idoc and FM: IDOC_OUTPUT_ORDRSP.
How to debug and see why the idoc is not generated,
i had kept break point in idoc_output_ordrsp function module
and program rsnasted, but my control does not
reaches this point.
can anyone help me in this issue.
Thanks and regards,
A. thirumaran.
Edited by: thirumaran a on Jul 22, 2008 1:35 PM

Hi,
Could you please check if the output is processed or not, whether in the output type what all conditions you have maintained e.g send immediately.
Reward me point if you find this helpful.
regds.......
Sumit

ATP Check against customer stock for return Sale order

Hi Friends,
Pl.help in this.
1. Is it possible to configure ATP check against Customer stock in a Sale order/Return order/any other way? ( Actuallly, client wants to take back empty cylinders through return sale order by ATP check against the customer stock)
Regards,
Mani

Hi Mani ,
Are you taking cylinder as returable packing item or not?
ex- For soft drinks or beverages industry it pretty common , they use thel returnable package material type and more over why you want use return sales order for this?
Note- Just plz explain scenario to MM and PP People also as availability check with all combination
Hope it is helpful to you,
Regards
Venkat

TANN item category item not picking for return sales order

Hi all,
I have a question regarding TANN item category. This TANN item category item is not picking for return sales order type. As far as i know RENN is the free goods for return sales order. Can you please clarify the above question further

Hi
If you are making return order by copying sales order then please see this procedure also.
Try to check in the copy control also.
Go to the following path IMG u2013 Sales and Distribution u2013 Sales u2013 Maintain Copy control for sales documents. (Tcode VTAA)
Select copying control : sales document to sales document.
Search your return delivery order from the reference sales document type.
Then select the item from the left side Colum.
Go and find out TANN item category and click on detail.
Check out Item Cat proposal. If it is empty then type your RENN condition type over here.
Now try to create the return sales order it might work.
Raj.

Sales Order Stock (For Repair Returns) - Valuated & Non-Valuated

Greetings All,
We are currently using sales order stock as quantity only for customer returns for repair (RMA Sales Order). As long as we do not give a credit to our customer, this is working. My problem is that some of our customers are requesting credit... This requires that the inventory now be valuated. I want to keep the link with the sales order (RMA). Is there a way to do this?
Thanks for reading!

Thanks for your quick response Ajay.
I am aware that I can move it to unrestricted stock but I would lose my link to the RMA sales order. Correct?
We currently are not using split valuation.
Any other suggestions?

Error while inbound creation for return sales order

Hi all,
 We are in the process of creating return sales order for invoice cancelation.
 We have created return sales order.
 we have made settings for automatic inbound creation.
 While creating inbound delivery system giving following error,
Material cannot be used for inbound delivery because QM is active.
Please help in solving error.
regards,
Mona

dear kiran,
 Tcode is for job planning,where can i make the required setting.
 Can you explain in detail?
regards,
Mona

BAPI for return sales order

Hi,
what BAPI that can be used for Return Sales Order? BAPI SALES_ORDER_CREATEFROMDAT2 cant work, I get return message as error : 'Unpermitted combination of business object BUS2032 and sales document type category H'.
thanks alots.
Alia

Hi Alia,
Go to transaction BAPI, and in the tree go to :
Sales and Distribution -> Sales -> SalesOrder
You will have a list of all the BAPI for the Sales Order. If you want a list of Sales Order, maybe you need the GetList BAPI : BAPI_SALESORDER_GETLIST
Rgd
Frédéric

Order Status for partial return sales order

Similar Messages

Maybe you are looking for