OS problem / Database problem ?

This is an SOS call.
We are running Oracle 9.2.0.1 on Win2K. on a Wipro Net Server having 2 GB RAM. IT is configured with RAID 5. It is running fine.
In order to have a backup server ready, we did a trial run on another IBM e server having exactly same configurations including network cards and mother boards, RAID5 etc.
For transferring the data, we did shut down on the server1 made a cold backup, applied all the files to server2. Copied the init file and password files too. Server2 is made up and working fine as long as limited number of users are connected to it. BUt when the number of users increase, it becomes really slow and not workable.
To diagnose, we ran statspack which reported probs with buffer busy. increased the buffer size.
Still the performance is not improving.
The interesing part is that if the same is shut down and reverted back to server1, it is all fine. NO performance probs at all.
Doubting on the RAID5, we even removed RAID and then tried on server2. Still no success.
Any help ?
Thanks in advance
Biju M Thomas

Still hoping for somebody to look into this.
I've done the analysis on the statspack report from oraperf.com. It is suggesting to increase the buffer cache as buffer busy waits are encountered. Right now the buffer cache is 805 MB. And moreover it is perfectly ok in server1.
ANy guess on what might be wrong or where I should look into. One more thing which I noticed was that there are lot of sql*net message from client in the wait events. Is that of any help to look into network related issues?
Thanks
Biju M Thomas

Similar Messages

Installation problem with NW'04 SR1: database connection failed

Hi all,
while installing NW '04 SR1 on Windows Server 2003 SP1 and MS SQL Server 2000 SP4 I ran into an error related to the database connection. While performing the step "Load Java Database content" SAPinst crashes with the message
com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
The connection to the SLQ Server with e.g. the Query Analyzer is OK. I had a problem with this installation setup before (have a look at the corresponding <a href="https://forums.sdn.sap.com/thread.jspa?threadID=338638&tstart=0">thread</a> ), the JDBC drivers where missing on the installation master but after copying them in the right direction the installation went on with no problem up to this point...
Has anybody an idea what could have happened here? Is this maybe a problem connected to the one I recently had
Below I attached the sapinst.log and jload.log with more detailed messages.
sapinst.log ###########
INFO 2007-03-12 22:06:24
Working directory changed to C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\ONE_HOST.
INFO 2007-03-12 22:06:24
Output of D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log' is written to the logfile C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\ONE_HOST/jload.java.log.
WARNING 2007-03-12 22:06:26
Execution of the command "D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log'" finished with return code 1. Output:
java version "1.4.2_13"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
Java HotSpot(TM) Client VM (build 1.4.2_13-b06, mixed mode)
12.03.2007 22:06:25 com.sap.inst.jload.Jload main
INFO: Jload -sec WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key -dataDir S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP -job C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML -log C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log
12.03.2007 22:06:26 com.sap.inst.jload.Jload main
SCHWERWIEGEND: couldn't connect to DB
com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
ERROR 2007-03-12 22:06:26
CJS-20065 Execution of JLoad tool 'D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log'' aborts with returncode 1. Check 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log' and 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.java.log' for more information.
jload.log ###########
12.03.07 22:06 com.sap.inst.jload.Jload main
INFO: Jload -sec WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key -dataDir S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP -job C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML -log C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log
12.03.07 22:06 com.sap.inst.jload.Jload main
SEVERE: couldn't connect to DB
com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
Best regards,
Bernd

Hello Kairat,
Please follow the below mentioned guide to install it.
Check all the parameters to set and run pre requisite checker before starting installation.
Keep in mind that before starting any SAP installation you should always run prerequisite checker.
https://websmp205.sap-ag.de/instguides --> SAP Netweaver -->SAP Netweaver 7.0 -- > Installations --> EHP2
Regards,
Amit Barnawal

Creation of a symptom/problem in CRM.(Solution Database)

Hi All,
Can anybody tell me what are the mandatory parameters for creation of a symptom/problem in solution database.
I am using a bapi:
BAPI_SYMPTOM_CREATE
can anybody tell me what all fields need to be populate for successful creation of a symptom.
It would also be nice if you can throw some light on the use/documentation regarding this bapi.
I am verifying the creation of symptom in table ISMP.Since when i create a symptom through transaction: IS01 it gets created in ISMP table but not through my BAPI. Please help.
<b>Full points will be awarded.</b>
Thanks in advance.
ashish.

Hi ,
u can create problem and solution in SDB,
by doing
Basic settings-->define number ranges (this is done by BASIS guys on SAF)
BASIC data filed is not required,
problems(prob type , prob subtype,define application area)
Solutions Solution type)
confugure this fields only ,
all the remaining fileds used to Activity, catalog Mgmt)
dont go with bapi's
u can use LSMW , this is better.
otherwise copy paste all the FAQ's manually in the system , and compile the Server for Delta compile, fullcompile, cluster compile,
Message was edited by:
kiran

(SOLVED)Problems during installation, can not refresh package database

I have been using Arch for a year (dual boot) but for some reasons I had to do a reinstall. It worked fine, but I did some things wrong and I had too reinstall (again, befor even entering the system). This time (and all the other times i've tried today) I can not complete the "select packages" step, it either freezes at "Refreshing package database" or gives me a message that it just can not be done (sorry, I do not have the exact words atm). I have internet and I've been trying a million different mirrors (including the one I used when it worked). What to do, what to do?
Worth noting is that I had the same problems a year a go, but it solved it self, no idea what I did then.
I would really appreciate if some one knew what was going on - it is driving me crazy beyond comprehension!
EDIT: maby this should have been pasted in the installation section?
EDIT2: Title
Last edited by elprofundo (2011-12-18 16:15:29)

I am sorry, it is during the installation and no command is in use (correct me if I'm wrong) - the tty7 is just reading "Synchronizing package database", the last times i've tried it didbn't 't continue for hours, other times it gives me an error message (which I haven't written down, sadly). I'm trying again atm.
EDIT: The error message I get is just
"error: failed retrieving file 'core.db' from mirror.optus.net
// mirrors.kernel.org : Connection timed out
Last edited by elprofundo (2011-12-15 21:47:59)

Problem with Join Queries using PHP and an Orcale Database

Ok, I am trying to build a simple php querying tool for my oracle database and for the most part it is working however I am having a problem getting data from my join queries. If I run the following query :
QUERY:
SELECT lastfirst,EnteredBy,Debit FROM students sts JOIN GLDetail gl ON gl.studentid=sts.id
RESULT SET:
Lastfirst     EnteredBy     Debit
caiu, test      204     1
But when I run the query correctly I get no results
QUERY:
SELECT sts.lastfirst,gl.EnteredBy,gl.Debit FROM students sts JOIN GLDetail gl ON gl.studentid=sts.id
RESULT SET:
sts.lastfirst     gl.EnteredBy     gl.Debit
and if I run the query combining the two above methods and adding a field (schoolid) that has the same name on both table I get the following result sets
QUERY:
SELECT lastfirst,EnteredBy,Debit,sts.schoolid FROM students sts JOIN GLDetail gl ON gl.studentid=sts.id
RESULT SET:
lastfirst     EnteredBy     Debit     sts.schoolid
caiu, test      204     1
QUERY:
SELECT lastfirst,EnteredBy,Debit,schoolid FROM students sts JOIN GLDetail gl ON gl.studentid=sts.id
RESULT SET:
NONE
Therefore, I have to have something written incorrectly in my php code and I just can not figure it out. My entire code is pasted below please provide me with an assistance you might have to offer. I have change the odbc_connec line so I could post it to this forum. In addition, I had to phrase out the column headers there for when you write the column headers you have to use ~ instead of , as the separator and then I turn back into the correct format for sql.
//These scripts just open help windows if somone clicks on the icon
<script>
function submit()
{document.sqlform.submit();}
</script>
<script>
function colwin(){
window.open("colnames.php",null,"height=300,width=400,scrollbars=1");}
</script>
<script>
function tabwin(){
window.open("tablenames.php",null,"height=300,width=400,scrollbars=1");}
</script>
<script>
function help(){
window.open("http://www.w3schools.com/sql/default.asp",null,"height=500,width=700,scrollbars=1");}
</script>
<form method="post" action="<?php echo $PHP_SELF;?>" name="sqlform">
<?php
//Cookie to check for authorization to the site
if($_COOKIE['cookie']=="CheckCookieForAuth")
//These get the values of the textareas after the form has been submitted
$sqlSELECT = $_POST["SELECT"];
$sqlFROM = $_POST["FROM"];
$sqlJOIN = $_POST["JOIN"];
$sqlWHERE = $_POST["WHERE"];
$sqlOTHER = $_POST["OTHER"];
$sqlSELECTTYPE = $_POST["SELECTTYPE"];
//This is the variable used to parse out my headers the user entered
$sqlColNames = split('~',$sqlSELECT);
//This converts the ~ separator to , so I can actually use it as part of my sql string
$search = array('~');
$replace = array(',');
$mystring = $sqlSELECT;
$sqlString = str_replace($search, $replace, $mystring);
//These are the textareas and the drop down options that the end users has to create queries
echo "<table border=0>";
echo "<tr><td valign='top'>";
echo "<B>SELECT TYPE</B> <BR><SELECT NAME=SELECTTYPE>
<OPTION VALUE='SELECT' SELECTED>SELECT</OPTION>
<OPTION VALUE='SELECT DISTINCT'>SELECT DISTINCT</OPTION>
<OPTION VALUE='INSERT'>INSERT</OPTION>
<OPTION VALUE='UPDATE'>UPDATE</OPTION>
<OPTION VALUE='DELETE'>DELETE</OPTION>
</SELECT>";
echo "</td><td>";
echo "<textarea rows=2 cols=75 name=SELECT wrap=physical>$sqlSELECT</textarea>";
echo "</td><td valign='top'>";
echo "<img src='images/sqlC.jpg' width='25' height='25' onclick='colwin()'>";
echo "</td></tr>";
echo "<tr><td valign='top'>";
echo "<b>FROM</b>";
echo "</td><td>";
echo "<textarea rows=2 cols=75 name=FROM wrap=physical>$sqlFROM</textarea>";
echo "</td><td valign='top'>";
echo "<img src='images/sqlT.jpg' width='25' height='25' border=0 onclick='tabwin()'>";
echo "</td></tr>";
echo "<tr><td valign='top'>";
echo "<b>JOIN</b>";
echo "</td><td>";
echo "<textarea rows=2 cols=75 name=JOIN wrap=physical>$sqlJOIN</textarea>";
echo "</td></tr>";
echo "<tr><td valign='top'>";
echo "<b>WHERE</b>";
echo "</td><td>";
echo "<textarea rows=2 cols=75 name=WHERE wrap=physical>$sqlWHERE</textarea>";
echo "</td></tr>";
//This is where the end user would enter group by, having, order by, etc..
echo "<tr><td valign='top'>";
echo "<b>OTHER</b>";
echo "</td><td>";
echo "<textarea rows=2 cols=75 name=OTHER wrap=physical>$sqlOTHER</textarea>";
echo "</td></tr>";
This is a run query icon and a help icon
echo "<tr><td colspan=2 align=right>";
echo "<img src='images/RunQuery.jpg' width='30' height='28' onclick='submit()'> <img src='images/qm.jpg' border=0 width='25' height='25' onclick='help()'>";
echo "</td></tr></table>";
echo "<br>";
echo "<br>";
//This is where I connect to my remote oracle database
     $conn=odbc_connect('ODBC_ConnectionName','USERNAME','PASSWORD');
//This is the sql string created by the end users
     $sql="$sqlSELECTTYPE $sqlString FROM $sqlFROM $sqlJOIN $sqlWHERE $sqlOTHER";
//This executes the connection string and the sql string
     $rs=odbc_exec($conn,$sql);
//This will display the query or a message if the query is empty
     if($rs!=NULL){
     echo "<table border=1>";
     echo "<tr>";
//This loops through the string array the end user enter the field name text area to get column headers
     for($i=0; $i<count($sqlColNames); $i++)
     echo "<td>";
     print_r($sqlColNames[$i]);
     echo "</td>";
     echo "</tr><tr>";
//This actually fetchs the rows from the statement and then display the data based on the column names the end user speificed
     while (odbc_fetch_row($rs))
          for($i=0; $i<count($sqlColNames); $i++)
               $results=odbc_result($rs,$sqlColNames[$i]);
               echo "<td>$results</td>";
          echo "</tr>";
     odbc_close($conn);
     echo "</table>";}else{echo "Results will be displayed here";}
echo "<br><br>";
echo $sql;
else
echo "Not logged in";
?>
</form>

This looks more like a SQL question than a PHP issue. There are a couple of JOIN examples at http://download.oracle.com/docs/cd/B28359_01/server.111/b28286/statements_10002.htm#i2066611 that might you work through the problem.

Connection problem with new database

Hi
Installed new database on my windows machine successfully
while connectting as sys user error
ORA-12500:TNS: listner failed to start dedicated server process
wlile connecting toad and sqlplus

Please read the error again "listner failed to start dedicated server process". Means what, listner listened your request to connect, it tried to hand-off the connect request but due to resources problem (lack of memory) it is not possible to start server process; i.e. presumably the server is very busy at that time. If you are not able to resolve the issue, please check the unwanted services and stop them in strat-run-services.msc.
More information can be found at below link too:
Re: ORA-12500
HTH
Girish Sharma

Problem with database instance installation

Hi@all,
I'm dealing with the installation of the sap solution manager 3.2 SR1.
The platform is a win 2000 server, I use Oracle as the database.
Oracle was installed successfully and the installation of the central instance terminated without errors.
Now I try to install the next step, the database instance.
I always choosed the standard parameters, except for I choosed no domain installation and unchecked using SLD.
Nevertheless, the installation procedure stops at step 16 with the following error log entry (partially translated from german to english):
System call failed. Error 1332 (Allocations of account names and safety identifications were not accomplished.
) in execution of system call 'LookupAccountName' with parameter (NULL, Administrators, ...), line (305) in file (synxcaccmg.cpp).
I've attached the full logfille here.
Looks like sapinst cannot get the system user parameters?
How could I solve this? Any idea?

This was the clue
I read through the whole planning and preparation tutorial and through the preinstallation and installation tutorial.
There's no recommondation to have the english os version installed.
But better such an easy problem instead of a difficult one
Thanks a lot!

Problem with online split backup, database oracle

Hello,
we use for backup our SAP system online split backup, our database is almost 3TB big. Backup is functional but sometimes (4x-5x per month) backup fail with error bellow. If i understant this problem correctly brbackup lost connection to oracle after split disk system and cant stop backup mode in database and backup failed. How can i solve this problem? Exist some parameter for brbackup for reconnect to db when brbackup lost connection? Thanks for your help!
BR0051I BRBACKUP 7.00 (25)
BR0262I Enter database user name[/password]:
BR0055I Start of database backup: bebnhrzd.anf 2009-09-22 14.52.25
BR0484I BRBACKUP log file: /oracle/BP1/sapbackup/bebnhrzd.anf
BR0351I Restoring /oracle/BP1/sapbackup/cntrlBP1.dbf
BR0355I from /oracle/BP1/sapbackup/cntrlBP1.dbf ...
BR0280I BRBACKUP time stamp: 2009-09-22 14.53.10
BR0319I Control file copy created: /oracle/BP1/sapbackup/cntrlBP1.dbf 21676032
BR0280I BRBACKUP time stamp: 2009-09-22 14.53.13
BR0315I 'Alter database begin backup' successful
BR0280I BRBACKUP time stamp: 2009-09-22 14.53.14
BR0295I Splitting mirror disks...
BR0280I BRBACKUP time stamp: 2009-09-22 16.07.43
BR0296I Split of mirror disks successful
BR0280I BRBACKUP time stamp: 2009-09-22 16.17.44
BR0301E SQL error -3135 at location BrBackAlter-3, SQL statement:
'/* BRBACKUP */ ALTER DATABASE END BACKUP'
ORA-03135: connection lost contact
BR0280I BRBACKUP time stamp: 2009-09-22 16.17.44
BR0318E 'Alter database end backup' failed
BR0280I BRBACKUP time stamp: 2009-09-22 16.17.44
BR0301E SQL error -3114 at location BrBackAlter-3, SQL statement:
'/* BRBACKUP */ ALTER DATABASE END BACKUP'
ORA-03114: not connected to ORACLE
BR0280I BRBACKUP time stamp: 2009-09-22 16.17.44
BR0318E 'Alter database end backup' failed
BR0280I BRBACKUP time stamp: 2009-09-22 16.17.44
BR0301W SQL error -3114 at location BrbDbLogClose-1, SQL statement:
'UPDATE SAP_SDBAH SET RC = '0005', ENDE = '20090922161744', OBJ = ' ', LINE = '# 224     0     0     81358       7817759352        0                0 ALL          online_split    util_file        -
7.00 (25)' WHERE BEG = '20090922145225' AND FUNCT = 'anf' AND SYSID = 'BP1''
ORA-03114: not connected to ORACLE
BR0326W Update of database log header failed
BR0056I End of database backup: bebnhrzd.anf 2009-09-22 16.17.44
BR0280I BRBACKUP time stamp: 2009-09-22 16.17.44
BR0054I BRBACKUP terminated with errors
Backup utility finished with returncode 5
Backup FAILED

Hello,
in note 534729 is nothing about ORA-03135: connection lost contact only error ORA-03114 which refer to the note 335199 and in this note in nothing about ORA-03114 I want to say two things: this two oracle errors (ORA-03135 and ORA-03114) are not in alertSID.log on db server or in syslog on backup server. This error are only reported from brbackup which is running on backup server which is "client side". We don't have problem with connection from work processes on all instances to db server, we have only problem with brbackup which lost connection after split disk system. How i say this problem occurs only sometimes. I was tested network connection from backup server to db server via niping a this is result:
(root@hytti) #./niping -c -H kiuru -B 30000
Sat Sep 26 14:10:58 2009
connect to server o.k.
send and receive 10 messages (len 30000)
times -
avg      7305 usecs
max     46234 usecs
min      2168 usecs
bw    8020.50 kb/sec
excluding max and min:
av2      3081 usecs
bw2 19013.91 kb/sec
do you have any idea?? Thanks!

Problem with upgrade due to no connection to audit database

Hello everyone!
Today after work I wanted to finally upgrade ZCM but run into some problems.
We have three servers: Two primary servers and one database-server (OEM Sybase SQL Anywhere). All three are running on SLES 11.
I want to upgrade our ZCM11.2.4MU1 to ZCM11.3a and then to 11.3.1.
I started by upgrading the Sybase database and running dbunload according to the documentation.
Then I continued with "sh install.sh -c" and chose "Audit Database". I selected the OEM Sybase SQL Anywhere with port 2639.
Admin, password and database-name were unique. But I made the mistake to set the servername to the same as the zenworks-database. *sigh*
The installation completed.
The sybase-asa and sybase-audit-asa services couldn't run at the same time, therefore I rebooted the database-server and installed the audit database again with a unique database-name.
Before the upgrade I could start dbisql and connect without problems to backup the database. Now I cannot connect anymore without using the additional parameter: links=tcpip{host=IPorDNSName,port=2638}
Connecting to the Audit Database via dbisql is not possible, with the following message:
Code:
Could not connect to the database.
Database server not found
Ensure that the name in the "Server name" field is spelled correctly, that the network options on the network tab are correct and that the database server has been started.
[Sybase][ODBC Driver][SQL Anywhere]Database server not found
SQLCODE=-100
SQLSTATE=08001
Connection parameters:
User=zenauditadmin
Password=***
Server=zenworks_audit_database_server
DBN=zenworks_audit_database2
LINKS=ShMem
ENC=NONE
links=tcpip{host=<ip>,port=2639}
With that said, it is not possible to upgrade the first primary server because the setup routine is also not possible to connect to the Audit Server:
Code:
We were unable to create a connection to the database. Please check your
connection information.
Specify the existing ZENworks database and database authentication information
for an existing user with sufficient permissions.
The services sybase-asa and sybase-audit-asa are both running. I also restarted them a couple of times.
zenworks_database.conf and zenworks_database_audit.conf look fine.
Do you have any idea what I missed?
Is the duplicate servername still somewhere existend and prevents the proper running?
Thank you very much in advance for pointing me in any direction!

novellchuck wrote:
>
> Hello everyone!
>
> Today after work I wanted to finally upgrade ZCM but run into some
> problems.
>
> We have three servers: Two primary servers and one database-server
> (OEM Sybase SQL Anywhere). All three are running on SLES 11.
> I want to upgrade our ZCM11.2.4MU1 to ZCM11.3a and then to 11.3.1.
>
> I started by upgrading the Sybase database and running dbunload
> according to the documentation.
> Then I continued with "sh install.sh -c" and chose "Audit Database". I
> selected the OEM Sybase SQL Anywhere with port 2639.
>
> Admin, password and database-name were unique. But I made the mistake
> to set the servername to the same as the zenworks-database. sigh
> The installation completed.
> The sybase-asa and sybase-audit-asa services couldn't run at the same
> time, therefore I rebooted the database-server and installed the audit
> database again with a unique database-name.
>
> Before the upgrade I could start dbisql and connect without problems
> to backup the database. Now I cannot connect anymore without using the
> additional parameter: links=tcpip{host=IPorDNSName,port=2638}
>
> Connecting to the Audit Database via dbisql is not possible, with the
> following message:
>
>
> Code:
> --------------------
> Could not connect to the database.
> Database server not found
>
> Ensure that the name in the "Server name" field is spelled
> correctly, that the network options on the network tab are correct
> and that the database server has been started. [Sybase][ODBC
> Driver][SQL Anywhere]Database server not found SQLCODE=-100
> SQLSTATE=08001
> Connection parameters:
> User=zenauditadmin
> Password=***
> Server=zenworks_audit_database_server
> DBN=zenworks_audit_database2
> LINKS=ShMem
> ENC=NONE
> links=tcpip{host=<ip>,port=2639}
> --------------------
>
>
> With that said, it is not possible to upgrade the first primary server
> because the setup routine is also not possible to connect to the Audit
> Server:
>
>
> Code:
> --------------------
> We were unable to create a connection to the database. Please
> check your connection information.
>
>
> ************************************************** ********************
> ******** Specify the existing ZENworks database and database
> authentication information for an existing user with sufficient
> permissions. --------------------
>
>
> The services sybase-asa and sybase-audit-asa are both running. I also
> restarted them a couple of times.
> zenworks_database.conf and zenworks_database_audit.conf look fine.
>
> Do you have any idea what I missed?
> Is the duplicate servername still somewhere existend and prevents the
> proper running?
>
> Thank you very much in advance for pointing me in any direction!
Oh boy... and no backup?
Not sure how to get the sybase back working again... my first choice in
such a case would be to make a contact to Novell, are you able to
create an SR on this?
Niels
I have always liked... Cowabunga!
If you find this post helpful, please show your appreciation by
clicking on the star below.
A member must be logged in before s/he can assign reputation points.

Problem using secondary database, sequence (and custom tuple binding)

I get an exception when I try to open a Sequence to a database that has a custom tuple binding and a secondary database. I have a guess what the issue is (below), but it boils down to my custom tuple-binding being invoked when opening the sequence. Here is the exception:
java.lang.IndexOutOfBoundsException
at com.sleepycat.bind.tuple.TupleInput.readUnsignedInt(TupleInput.java:4
14)
at com.sleepycat.bind.tuple.TupleInput.readInt(TupleInput.java:233)
at COM.shopsidekick.db.community.Shop_URLTupleBinding.entryToObject(Shop
_URLTupleBinding.java:72)
at com.sleepycat.bind.tuple.TupleBinding.entryToObject(TupleBinding.java
:73)
at COM.tagster.db.community.SecondaryURLKeyCreator.createSecondaryKey(Se
condaryURLKeyCreator.java:38)
at com.sleepycat.je.SecondaryDatabase.updateSecondary(SecondaryDatabase.
java:546)
at com.sleepycat.je.SecondaryTrigger.databaseUpdated(SecondaryTrigger.ja
va:42)
at com.sleepycat.je.Database.notifyTriggers(Database.java:1343)
at com.sleepycat.je.Cursor.putInternal(Cursor.java:770)
at com.sleepycat.je.Cursor.putNoOverwrite(Cursor.java:352)
at com.sleepycat.je.Sequence.<init>(Sequence.java:139)
at com.sleepycat.je.Database.openSequence(Database.java:332)
Here is my code:
// URL ID DB
DatabaseConfig urlDBConfig = new DatabaseConfig();
urlDBConfig.setAllowCreate(true);
urlDBConfig.setReadOnly(false);
urlDBConfig.setTransactional(true);
urlDBConfig.setSortedDuplicates(false); // No sorted duplicates (can't have them with a secondary DB)
mURLDatabase = mDBEnv.openDatabase(txn, "URLDatabase", urlDBConfig);
// Reverse URL lookup DB table
SecondaryConfig secondaryURLDBConfig = new SecondaryConfig();
secondaryURLDBConfig.setAllowCreate(true);
secondaryURLDBConfig.setReadOnly(false);
secondaryURLDBConfig.setTransactional(true);
TupleBinding urlTupleBinding = DataHelper.instance().createURLTupleBinding();
SecondaryURLKeyCreator secondaryURLKeyCreator = new SecondaryURLKeyCreator(urlTupleBinding);
secondaryURLDBConfig.setKeyCreator(secondaryURLKeyCreator);
mReverseLookpupURLDatabase = mDBEnv.openSecondaryDatabase(txn, "SecondaryURLDatabase", mURLDatabase, secondaryURLDBConfig);
// Open the URL ID sequence
SequenceConfig urlIDSequenceConfig = new SequenceConfig();
urlIDSequenceConfig.setAllowCreate(true);
urlIDSequenceConfig.setInitialValue(1);
mURLSequence = mURLDatabase.openSequence(txn, new DatabaseEntry(URLID_SEQUENCE_NAME.getBytes("UTF-8")), urlIDSequenceConfig);
My secondary key creator class looks like this:
public class SecondaryURLKeyCreator implements SecondaryKeyCreator {
// Member variables
private TupleBinding mTupleBinding; // The tuple binding
* Constructor.
public SecondaryURLKeyCreator(TupleBinding iTupleBinding) {
mTupleBinding = iTupleBinding;
* Create the secondary key.
public boolean createSecondaryKey(SecondaryDatabase iSecDB, DatabaseEntry iKeyEntry, DatabaseEntry iDataEntry, DatabaseEntry oResultEntry) {
try {
URLData urlData = (URLData)mTupleBinding.entryToObject(iDataEntry);
String URL = urlData.getURL();
oResultEntry.setData(URL.getBytes("UTF-8"));
catch (IOException willNeverOccur) {
// Success
return(true);
I think I understand what is going on, and I only noticed it now because I added more fields to my custom data (and tuple binding):
com.sleepycat.je.Sequence.java line 139 (version 3.2.44) does this:
status = cursor.putNoOverwrite(key, makeData());
makeData creates a byte array of size MAX_DATA_SIZE (50 bytes) -- which has nothing to do with my custom data.
The trigger causes an call to SecondaryDatable.updateSecondary(...) to the secondary DB.
updateSecondary calls createSecondaryKey in my SecondaryKeyCreator, which calls entityToObject() in my tuple-binding, which calls TupleInput.readString(), etc to match my custom data. Since what is being read goes for more than the byte array of size 50, I get the exception.
I didn't notice before because my custom tuple binding used to read fewer that 50 bytes.
I think the problem is that my tuple binding is being invoked at all at this point -- opening a sequence -- since there is no data on which it can act.

Hi,
It looks like you're making a common mistake with sequences which is to store the sequence itself in a database that is also used for application data. The sequence should normally be stored in separate database to prevent configuration conflicts and actual data conflicts between the sequence record and the application records.
I suggest that you create another database whose only purpose is to hold the sequence record. This database will contain only a single record -- the sequence. If you have more than one sequence, storing all sequences in the same database makes sense and is safe.
The database used for storing sequences should not normally have any associated secondary databases and should not be configured for duplicates.
--mark

JSP and Java Beans with Database Problem

hellow, this is my first posting and i hope to help me as fast as you can...
my problem is simplly i cant get any data from the database (whatever the database it is, i test it with MS Access and MySQL server) when i use a bean, But if i put my connection statement in the JSP file thair is no problem... ???? !!!!
for example i have a class "Authentication" that have a method to test if the username and password is correct or not and return 1 if true, 0 if false, -1 if thair are some problem in connecting DB.
now if i create a normal java application that uses this method, it's work and no problems, BUT if i used a JSP page to use this method it's return allways -1

T1 class:
package VX;
import java.sql.*;
import java.util.*;
import javax.swing.*;
public class T1
//public MBJDBConnection(String driver,String url)
public T1()
JDBC_DRIVER = "com.mysql.jdbc.Driver";//driver;
DATABASE_URL = "jdbc:mysql://localhost:3306/rawafed?user=root;password=0000";//url;
//=======DB CONNECTION===========================================
private static String JDBC_DRIVER;
private static String DATABASE_URL;
protected Connection connection;
protected Statement statement;
//===========End DBC==============================================
public int update(String sqlUpdate)
     int i=0;
          //connectDB();
          try{
               i=statement.executeUpdate(""+sqlUpdate);
               catch(Exception e)
                    System.out.println("Error Inserting Statement Or Connection Not Opened");
          //disconnectDB();
     return i;
public ResultSet select(String sqlQuery)
          //connectDB();
          ResultSet rs;
          try
          {//open try
          rs=statement.executeQuery(""+sqlQuery);
               return rs;
          }//end try
          catch(Exception e2)
               //System.out.println("Error Selecting Statement Or Connection Not Opened");
          }//end catch
          //add to array list
     //return resultList;
     return null;
//------Methods-------
public void connectDB()
//===========================Connection===================
try
Class.forName(JDBC_DRIVER);
catch(Exception e)
System.out.println("Error : FOR NAME");
try
connection = DriverManager.getConnection(DATABASE_URL, "root", "0000");
catch(Exception e)
System.out.println("Error : DB URL");
try
statement = connection.createStatement();
catch(Exception e)
System.out.println("Error : CREATE STATEMENT ERROR");
public void disconnectDB()
try
statement.close();
connection.close();
catch(Exception e2)
System.out.println("Error : CAN'T CLOSE DB");
T2 Class
package VX;
// class Person.
//Required Class : EDC.EDCDB
import java.sql.*;
public class T2
     public T2()
          //initialization
     //........................ Attributes .........................
     private String user;
     private String password;
     private T1 db=new T1();
     private ResultSet rs;
     //......................... Methods .........................
     public String getAdmin(String u,String p)// 0: Failure, 1:Success and he is Administrator, 2: success and he is a regular employee 3: SUCCESS AND HE IS agent
          try
          user=u;
          password=p;
          rs=db.select("SELECT emp_id,password FROM Employee WHERE emp_id="+user+" AND password="+password+" AND Rank_ID=1");
          if(rs.next())
               return ""+1;
          else
               rs=db.select("SELECT emp_id,password FROM Employee WHERE emp_id="+user+" AND password="+password+" AND Rank_ID=2");
               if(rs.next())
                    return ""+2;
               else
                    rs=db.select("SELECT emp_id,password FROM Employee WHERE emp_id="+user+" AND password="+password+" AND Rank_ID=3");
                    if(rs.next())
                         return ""+3;
                    else return ""+0;
          catch(Exception e){System.out.println("Error \n"+e.getMessage());return ""+e.getMessage()+"\n"+(-1);}
     public int getCard(String u,String p)// 0: Failure, 1:Success and he is Administrator, 2: success
          user=u;
          password=p;
          try
          db.connectDB();
          rs=db.select("SELECT Card_ID,password FROM Card WHERE Card_ID='"+user+"' AND password='"+password+"'");
          if(rs.next())
               return 1;
          return 0;
          catch(Exception w)
               return -1;
          finally
               //System.out.println("Done");
               db.disconnectDB();
     public int getAny()
          return 1;
}//end class
This is a tested class and it's work OK
import VX.T2;
public class T3
     public static void main(String [] args)
          System.out.println("System Started...");
          try
               T2 t2=new T2();
               System.out.println(t2.getCard("1","a"));
          catch(Exception e)
               System.out.println("Opsssss ...");
Now this is the JSP Code that OK and Run without any problems
<%@ page contentType="text/html; charset=windows-1256" language="java" import="java.sql.*" errorPage="" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1256" />
<title>test</title>
</head>
<body>
<%
//Mazin B. Jabarin 20210464
//Testing JSP - MySQL Server Driver
String connectionURL = "jdbc:mysql://localhost:3306/EDCDB?user=root;password=0000";
Connection connection = null;
Statement statement = null;
ResultSet rs = null;
%>
<%
try{
Class.forName("com.mysql.jdbc.Driver");
connection = DriverManager.getConnection(connectionURL, "root", "0000");
statement = connection.createStatement();
rs = statement.executeQuery("SELECT * FROM a");
while (rs.next()) {
out.println(rs.getString("id")+"<br>");
rs.close();
catch(Exception e)
out.print("Error : "+e.getMessage());
%>
</body>
</html>
Now this JSP File always returns (-1) ???? !!!!!!!
<%@ page contentType="text/html; charset=iso-8859-1" language="java" import="java.sql.*" import="VX.T2" import="java.util.*" errorPage="" %>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<title>Untitled Document</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</head>
<body>
<%
try
T2 t2=new T2();
out.println("Result Still : "+t2.getCard("1","a"));
catch(Exception w)
out.println("<BR> Error In Execution ??? "+w.getMessage());
%>
</body>
</html>
++++++++++++++++++++++++++++
any one can help me please :(
i use tomcat as web-application
and i install jdk 1.5
also JBulder 7
(now i supposed that the JBulder make some conflict, so i uninstalled it but still Not Working) ...
before one year i was working just like this way and it was working
but now i dont know what is the problem
i am really need help.

Problem Oracle 10g database Installation on Windows 2003 Server

Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad Shoaib

898118 wrote:
Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad ShoaibOracle really doesn't like to be installed into directories with spaces in their names.

Database Instance Installation Problem on Oracle 8.1.7

Dear gurus,
I'm having problem when installing Database Central Instance on Solaris 10 - Oracle 8.1.7 (32bit) - SAP 4.6c.
Here's the error log:
Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
Connected.
Echo                            ON
SVRMGR> SET TERMOUT ON;
Termout                         ON
SVRMGR> SHUTDOWN ABORT;
ORACLE instance shut down.
SVRMGR> STARTUP NOMOUNT PFILE=init.ora;
ORA-27123: unable to attach to shared memory segment
SVR4 Error: 22: Invalid argument
Additional information: 1
Additional information: 3
SVRMGR> CREATE DATABASE PRD
     2> CONTROLFILE REUSE
     3> MAXDATAFILES 254
     4> MAXLOGFILES   255
     5> MAXLOGHISTORY 1000
     6> MAXLOGMEMBERS 3
     7> MAXINSTANCES 50
     8> CHARACTER SET "WE8DEC"
     9> DATAFILE
    10> '/oracle/PRD/sapdata1/system_1/system.data1' SIZE 300M REUSE
    11> NOARCHIVELOG
Info: DBCREATEDB_IND_ORA SvrmgrDoDummy 2 349
    12> LOGFILE
    13> GROUP 11 (
    14> '/oracle/PRD/origlogA/log_g11m1.dbf',
    15> '/oracle/PRD/mirrlogA/log_g11m2.dbf'
    16> ) SIZE 20M REUSE
    17> ,GROUP 13 (
    18> '/oracle/PRD/origlogA/log_g13m1.dbf',
    19> '/oracle/PRD/mirrlogA/log_g13m2.dbf'
    20> ) SIZE 20M REUSE
    21> ,GROUP 12 (
    22> '/oracle/PRD/origlogB/log_g12m1.dbf',
    23> '/oracle/PRD/mirrlogB/log_g12m2.dbf'
    24> ) SIZE 20M REUSE
    25> ,GROUP 14 (
    26> '/oracle/PRD/origlogB/log_g14m1.dbf',
    27> '/oracle/PRD/mirrlogB/log_g14m2.dbf'
    28> ) SIZE 20M REUSE
    29> ;
CREATE DATABASE PRD
ORA-01034: ORACLE not available
SVRMGR> EXIT
Server Manager complete.
Error: DBCREATEDB_IND_ORA InternalInstallationDo 2 349
Create Database failed errorcode = 27123.
Error: DBCREATEDB_IND_ORA InstallationDo 2 349
Phase failed.
Error: Main {} 2 349
Installation aborted.
I have tweaked the shared memory max as suggested in Oracle Manual / SAP Installation Guide, to no avail.
The listener is up already.
When I logged in as user ORA<SID>, and go to svrmgrl > startup nomount pfile=init.ora, it can startup without hassle.
Although the Product is not supported in PAM, we have another machine running smoothly for years with this product combination, so it's not the product compatibility issues.
But when using R3SETUP -f DATABASE.R3S, the phase stopped with the log pasted above.
Any ideas, gurus?
Thanks for help.
Best Regards,

Mr. Markus, there's no file on saptrace/usertrace.
To be sure, here's what I've done:
1. Run oracle listener.
2. Check connection with svrmgrl > connect internal (connected).
3. Modify init.ora with my DB Name:
wef
# replace DEFAULT with your database name
*db_name=PRDDB*
db_files = 80                                                         # SMALL
# db_files = 400                                                      # MEDIUM
# db_files = 1500                                                     # LARGE
db_file_multiblock_read_count = 8                                     # SMALL
# db_file_multiblock_read_count = 16                                  # MEDIUM
# db_file_multiblock_read_count = 32                                  # LARGE
db_block_buffers = 100                                                 # SMALL
# db_block_buffers = 550                                              # MEDIUM
# db_block_buffers = 3200                                             # LARGE
shared_pool_size = 3500000                                            # SMALL
# shared_pool_size = 5000000                                          # MEDIUM
# shared_pool_size = 9000000                                          # LARGE
log_checkpoint_interval = 10000
processes = 50                                                        # SMALL
# processes = 100                                                     # MEDIUM
# processes = 200                                                     # LARGE
parallel_max_servers = 5                                              # SMALL
# parallel_max_servers = 4 x (number of CPUs)                         # MEDIUM
# parallel_max_servers = 4 x (number of CPUs)                         # LARGE
log_buffer = 32768                                                    # SMALL
# log_buffer = 32768                                                  # MEDIUM
# log_buffer = 163840                                                 # LARGE
# audit_trail = true            # if you want auditing
# timed_statistics = true       # if you want timed statistics
max_dump_file_size = 10240      # limit trace file size to 5 Meg each
# Uncommenting the line below will cause automatic archiving if archiving has
# been enabled using ALTER DATABASE ARCHIVELOG.
# log_archive_start = true
# log_archive_dest = disk$rdbms:[oracle.archive]
# log_archive_format = "T%TS%S.ARC"
# If using private rollback segments, place lines of the following
# form in each of your instance-specific init.ora files:
# rollback_segments = (name1, name2)
# If using public rollback segments, define how many
# rollback segments each instance will pick up, using the formula
#   # of rollback segments = transactions / transactions_per_rollback_segment
# In this example each instance will grab 40/5 = 8:
# transactions = 40
# transactions_per_rollback_segment = 5
# Global Naming -- enforce that a dblink has same name as the db it connects to
global_names = TRUE
# Edit and uncomment the following line to provide the suffix that will be
# appended to the db_name parameter (separated with a dot) and stored as the
# global database name when a database is created. If your site uses
# Internet Domain names for e-mail, then the part of your e-mail address after
# the '@' is a good candidate for this parameter value.
# db_domain = us.acme.com       # global database name is db_name.db_domain
# FOR DEVELOPMENT ONLY, ALWAYS TRY TO USE SYSTEM BACKING STORE
# vms_sga_use_gblpagfil = TRUE
# FOR BETA RELEASE ONLY. Enable debugging modes. Note that these can
# adversely affect performance. On some non-VMS ports the db_block_cache_*
# debugging modes have a severe effect on performance.
#_db_block_cache_protect = true                       # memory protect buffers
#event = "10210 trace name context forever, level 2" # data block checking
#event = "10211 trace name context forever, level 2" # index block checking
#event = "10235 trace name context forever, level 1" # memory heap checking
#event = "10049 trace name context forever, level 2" # memory protect cursors
# define parallel server (multi-instance) parameters
#ifile = ora_system:initps.ora
# define two control files by default
control_files = (ora_control1, ora_control2)
# Uncomment the following line if you wish to enable the Oracle Trace product
# to trace server activity. This enables scheduling of server collections
# from the Oracle Enterprise Manager Console.
# Also, if the oracle_trace_collection_name parameter is non-null,
# every session will write to the named collection, as well as enabling you
# to schedule future collections from the console.
# oracle_trace_enable = TRUE
# Uncomment the following line, if you want to use some of the new 8.1
# features. Please remember that using them may require some downgrade
# actions if you later decide to move back to 8.0.
#compatible = 8.1.0
3. set shared memory parameter as in sapnote 724713.
4. executing R3SETUP
and it tells me this error:
Info: DBCREATEROLLSEGSTART_IND_ORA SyGroupIDGet 2 354
Group id for group dba is 102.
Info: DBCREATEROLLSEGSTART_IND_ORA SyUserIDGet 2 354
User id for user oraprd is 100.
Info: DBCREATEROLLSEGSTART_IND_ORA SvrmgrDoDummy 2 354
Return from DB: 1034.
Info: DBCREATEROLLSEGSTART_IND_ORA SvrmgrDoDummy 2 354
Oracle Server Manager Release 3.1.7.0.0 - Production
Copyright (c) 1997, 1999, Oracle Corporation. All Rights Reserved.
Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Server Manager complete.
Info: DBCREATEROLLSEGSTART_IND_ORA InternalInstallationDo 2 354
Startup Database.
Info: DBCREATEROLLSEGSTART_IND_ORA OracleCmd 2 354
Startup Database with PFILE: init.ora.
Info: DBCREATEROLLSEGSTART_IND_ORA SyCoprocessCreateAsUser 2 354
Creating coprocess /oracle/PRD/817_32/bin/svrmgrl [email protected] as user oraprd and group dba ...
Info: DBCREATEROLLSEGSTART_IND_ORA SyGroupIDGet 2 354
Group id for group dba is 102.
Info: DBCREATEROLLSEGSTART_IND_ORA SyUserIDGet 2 354
User id for user oraprd is 100.
Info: DBCREATEROLLSEGSTART_IND_ORA SvrmgrDoDummy 2 354
Return from DB: 27123.
Info: DBCREATEROLLSEGSTART_IND_ORA SvrmgrDoDummy 2 354
Oracle Server Manager Release 3.1.7.0.0 - Production
Copyright (c) 1997, 1999, Oracle Corporation. All Rights Reserved.
Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
Connected.
ORA-27123: unable to attach to shared memory segment
SVR4 Error: 22: Invalid argument
Additional information: 1
Additional information: 2
alter database noarchivelog
ORA-01034: ORACLE not available
alter database open
ORA-01034: ORACLE not available
Server Manager complete.
Error: DBCREATEROLLSEGSTART_IND_ORA InternalInstallationDo 2 354
Startup Database with error: 27123.
Error: DBCREATEROLLSEGSTART_IND_ORA InstallationDo 2 354
Phase failed.
Error: Main {} 2 354
Installation aborted.
It's driving me nuts for the last days.. can't figure out what happened here.

Oracle database 11g release 2 installation problem on windows 7 (64-bit)

First of all my windows is not genuine, but on my friend's desktop oracle download and installation worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
(Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w, deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
and
then
I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)" from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
The values I filled for
1) Global Database Name : orcl
2) System Identifier : orcl
3) I chose common password for both SYS and SYSTEM
4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
6) Then after few more nitty-gritty clicks, we are set to go !
Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
Username : sys/ as sysdba
Password : (its the one you created in step 3 stated above )
After this you are ready to write your first SQL command.

Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
About Database Administrator Security and Privileges

Oracle Database 10g relase 1 Installation Problem on RHEL 3 ES

Dear all
I'm trying to install oracle database 10g r1 X86_64 on Intel Xeon Machine with EM64T technology with RHEL 3 ES update 2 X86_64 edition. The problem is described below :
Oracle OUI .runInstaller collapsed with such a following error:
An unexpected exception has been detected in native code outside the
VM.
Unexpected Signal : 11 occurred at PC=0x8077470
Function=[Unknown.]
Library=(N/A)
Is there anyone can help me ??

Check pushitz website and ensure that you have all the required rpms installed properly.
Check the log files in the installation directory. That should give some more details as to what exactly is going on.

Database creation problem on Windows XP

Hello Readers
I have installed ORACLE Database Engine on windows XP.
I am facing problem in database creation.
I have tryed wizard as well as mannual method.
in wizard at 90% it gives an error "END-OF-FILE ON COMMUNICATION CHANNEL"
although CD drive is in CR Rom drive.
Please help me ....
Rashid Masood Ashraf
email: [email protected]

After going to the properties as you suggested:
Right now the Obtain an IP address automatically is checked
I need to check the Use the following IP address:
What should I enter for
IP address:
Subnet mask:
Default gateway:
Please help.
Edited by: Nel Marcus on Dec 2, 2008 3:49 PM

OS problem / Database problem ?

Similar Messages

Maybe you are looking for