OTA Update - code 401

I was notified that today's Thunderbolt software update to version 605.5 was available for download. I accidentally pushed back instead of OK & now the update is not available & under status, it says that I rejected the update with code 401. I have turned the phone off & on, also removed the battery & turned back on & I still have the same status with code 401. Any assistance will be appreciated on how to reverse the rejection & be able to receive the update. I did initially get the larger update, this is just the smaller update from 605.3 to 605.5. Thank you.

You may need to contact CS and have them push the update again to the device, I am guessing since you denied update it added you to the system not to recieve it... They may be able to take care of you on this situation..
Another thing the may be a miner update but it fixed the security issue reported earlier and fixed the voice mail notification..  Worth having..

Similar Messages

  • OTA-HTTP-SEND-401 Error

    Hi,
    We're getting a 401 error message from a Trading Partner (TP). They say there is no password required to get to their website. From their end, the request doesn't send a certificate with it. The TP certificate has 2048 keysize, while the wallet and our other TPs have 1024 keysize.
    Could the problem be with the transport endpoint or the TP certificate?
    Here is the error from the b2b.log:
    2009.05.05 at 15:06:03:520: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Invoking PackMessage
    2009.05.05 at 15:06:03:520: Thread-15: B2B - (DEBUG) MimePackaging:pack:Enter
    2009.05.05 at 15:06:03:525: Thread-15: B2B - (DEBUG) MimePackaging:createMimeMessage:Enter
    2009.05.05 at 15:06:03:535: Thread-15: B2B - (DEBUG) MimePackaging:createMimeMessage:number of pc components: 1
    2009.05.05 at 15:06:03:535: Thread-15: B2B - (DEBUG) MimePackaging:createMimeBodyPart:Enter
    2009.05.05 at 15:06:03:560: Thread-15: B2B - (DEBUG) MimePackaging:createMimeBodyPart:header name-value: Content-Type-application/EDI-X12; name=004010
    2009.05.05 at 15:06:03:560: Thread-15: B2B - (DEBUG) MimePackaging:createMimeBodyPart:header name-value: Content-Disposition-attachment; filename=004010
    2009.05.05 at 15:06:03:561: Thread-15: B2B - (DEBUG) MimePackaging:createMimeBodyPart:header name-value: Content-Transfer-Encoding-binary
    2009.05.05 at 15:06:03:562: Thread-15: B2B - (DEBUG) MimePackaging:applySecurity:Enter
    2009.05.05 at 15:06:03:562: Thread-15: B2B - (DEBUG) MimePackaging:applySecurity:Exit
    2009.05.05 at 15:06:03:563: Thread-15: B2B - (DEBUG) MimePackaging:createMimeBodyPart:Exit
    2009.05.05 at 15:06:03:690: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: setDigestAlgorithm using algorithm name Entering...
    2009.05.05 at 15:06:03:691: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: setDigestAlgorithm using algorithm name Leaving...
    2009.05.05 at 15:06:03:785: Thread-15: B2B - (DEBUG) MimePackaging:applySecurity:Enter
    2009.05.05 at 15:06:03:786: Thread-15: B2B - (DEBUG) MimePackaging:createSignedMimeBodyPart:Enter
    2009.05.05 at 15:06:03:787: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: setProtocolVersion Entering...
    2009.05.05 at 15:06:03:788: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: setProtocolVersion Leaving...
    2009.05.05 at 15:06:03:788: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: setSignatureAlgorithm using algorithm name Entering...
    2009.05.05 at 15:06:03:788: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: setSignatureAlgorithm using algorithm name Leaving...
    2009.05.05 at 15:06:03:789: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: setDigestAlgorithm using algorithm name Entering...
    2009.05.05 at 15:06:03:789: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: setDigestAlgorithm using algorithm name Leaving...
    2009.05.05 at 15:06:03:789: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: sign Entering...
    2009.05.05 at 15:06:03:790: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: sign Sign using the configured certificate
    2009.05.05 at 15:06:03:790: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: sign wrl: /hub02/app/oracle/product/64bit/OAS101/Apache/Apache/conf/ssl.wlt/default
    2009.05.05 at 15:06:03:802: Thread-15: B2B - (DEBUG) Utility:getPrivateKey:Enter
    2009.05.05 at 15:06:04:928: Thread-15: B2B - (DEBUG) Utility:getPrivateKey:matching private key found
    2009.05.05 at 15:06:04:931: Thread-15: B2B - (DEBUG) Utility:getPrivateKey:Exit
    2009.05.05 at 15:06:04:964: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.Encoding:Encoding: setEncodingType Entering...
    2009.05.05 at 15:06:04:964: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.Encoding:Encoding: setEncodingType Leaving...
    2009.05.05 at 15:06:04:965: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.Encoding:Encoding: update Entering...
    2009.05.05 at 15:06:04:965: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.Encoding:Encoding: update Leaving...
    2009.05.05 at 15:06:04:965: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.Encoding:Encoding: encode Entering...
    2009.05.05 at 15:06:04:966: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.Encoding:Encoding: encode Leaving...
    2009.05.05 at 15:06:04:967: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: sign Leaving...
    2009.05.05 at 15:06:04:967: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: printErrorInfo Entering...
    2009.05.05 at 15:06:04:968: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: printErrorInfo Leaving...
    2009.05.05 at 15:06:04:982: Thread-15: B2B - (DEBUG) MimePackaging:createSignedMimeBodyPart:Exit
    2009.05.05 at 15:06:04:982: Thread-15: B2B - (DEBUG) MimePackaging:createEncryptedMimeBodyPart:Enter
    2009.05.05 at 15:06:04:985: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: setProtocolVersion Entering...
    2009.05.05 at 15:06:04:985: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: setProtocolVersion Leaving...
    2009.05.05 at 15:06:04:986: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: setEncryptionAlgorithm using algorithm name Entering...
    2009.05.05 at 15:06:04:986: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: setEncryptionAlgorithm using algorithm name Leaving...
    2009.05.05 at 15:06:04:987: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: setEncryptionCertificate Entering...
    2009.05.05 at 15:06:04:988: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.Encoding:Encoding: setEncodingType Entering...
    2009.05.05 at 15:06:04:988: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.Encoding:Encoding: setEncodingType Leaving...
    2009.05.05 at 15:06:04:989: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.Encoding:Encoding: update Entering...
    2009.05.05 at 15:06:04:989: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.Encoding:Encoding: update Leaving...
    2009.05.05 at 15:06:04:989: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.Encoding:Encoding: decode Entering...
    2009.05.05 at 15:06:04:997: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.Encoding:Encoding: decode Entering...
    2009.05.05 at 15:06:04:997: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: setEncryptionCertificate Leaving...
    2009.05.05 at 15:06:04:997: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: encrypt Entering...
    2009.05.05 at 15:06:05:006: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: encrypt Leaving...
    2009.05.05 at 15:06:05:007: Thread-15: B2B - (DEBUG) MimePackaging:createEncryptedMimeBodyPart:Exit
    2009.05.05 at 15:06:05:007: Thread-15: B2B - (DEBUG) MimePackaging:applySecurity:Exit
    2009.05.05 at 15:06:05:008: Thread-15: B2B - (DEBUG) MimePackaging:createMimeMessage:Exit
    2009.05.05 at 15:06:05:013: Thread-15: B2B - (DEBUG) MimePackaging:getMimeContent:Enter
    2009.05.05 at 15:06:05:014: Thread-15: B2B - (DEBUG) MimePackaging:getMimeContent:Exit
    2009.05.05 at 15:06:05:014: Thread-15: B2B - (DEBUG) MimePackaging:pack:Exit
    2009.05.05 at 15:06:05:019: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Invoking Pre-Transmit
    2009.05.05 at 15:06:05:019: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit Enter
    2009.05.05 at 15:06:05:020: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit Log & Update Database Tables
    2009.05.05 at 15:06:05:020: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit Update the Message Table Row with message state Wait for Incoming Acknowledgment
    2009.05.05 at 15:06:05:021: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit Create a Native Event Table row for outgoing Request Message
    2009.05.05 at 15:06:05:021: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(3 params) Enter
    2009.05.05 at 15:06:05:023: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:insertNativeEvtTblRow msgInfo.id = <1396700:0:221@096997515>
    2009.05.05 at 15:06:05:023: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:protocl id set A
    2009.05.05 at 15:06:05:024: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:
    ** DbAccess:insertNativeEvtTblRow protocolCollabId = null
    2009.05.05 at 15:06:05:357: Thread-15: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:Runtime
    2009.05.05 at 15:06:05:357: Thread-15: BusinessLogicLayer - (DEBUG) Push Stack: createDataStorage
    2009.05.05 at 15:06:05:366: Thread-15: BusinessLogicLayer - (DEBUG) Pop Stack: createDataStorage
    2009.05.05 at 15:06:05:387: Thread-15: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:Runtime
    2009.05.05 at 15:06:05:388: Thread-15: BusinessLogicLayer - (DEBUG) Push Stack: createWireMessage
    2009.05.05 at 15:06:05:408: Thread-15: BusinessLogicLayer - (DEBUG) Pop Stack: createWireMessage
    2009.05.05 at 15:06:05:408: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(3 params) Exit
    2009.05.05 at 15:06:05:419: Thread-15: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:Runtime
    2009.05.05 at 15:06:05:420: Thread-15: BusinessLogicLayer - (DEBUG) Push Stack: updateBusinessMessage
    2009.05.05 at 15:06:05:431: Thread-15: BusinessLogicLayer - (DEBUG) Pop Stack: updateBusinessMessage
    2009.05.05 at 15:06:05:432: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit Create Event Table row for Message Retries
    2009.05.05 at 15:06:05:433: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit timeToAck = Wed Dec 31 18:00:00 PST 1969
    2009.05.05 at 15:06:05:437: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertEvtTblRow Enter
    2009.05.05 at 15:06:05:463: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertEvtTblRow Event Type = 2
    2009.05.05 at 15:06:05:463: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertEvtTblRow EventId = 12
    2009.05.05 at 15:06:05:463: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertEvtTblRow Id = 1396700:0:221
    2009.05.05 at 15:06:05:468: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertEvtTblRow Exit
    2009.05.05 at 15:06:05:472: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit Current TimeStamp isTue May 05 15:06:05 PDT 2009
    2009.05.05 at 15:06:05:473: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit Retry shall happen at Tue May 05 17:06:05 PDT 2009
    2009.05.05 at 15:06:05:473: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit business transaction info name null revision null
    2009.05.05 at 15:06:05:474: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit Exit
    2009.05.05 at 15:06:05:474: Thread-15: B2B - (DEBUG) DBContext commit: Enter
    2009.05.05 at 15:06:05:482: Thread-15: B2B - (DEBUG) DBContext commit: Transaction.commit()
    2009.05.05 at 15:06:05:483: Thread-15: B2B - (DEBUG) DBContext commit: Leave
    2009.05.05 at 15:06:05:483: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Calling Send to transmit the message
    2009.05.05 at 15:06:05:484: Thread-15: B2B - (DEBUG) Protocol Name: HTTPS
    2009.05.05 at 15:06:05:484: Thread-15: B2B - (DEBUG) Version Name: 1.1
    2009.05.05 at 15:06:05:484: Thread-15: B2B - (DEBUG) Endpoint: https://tp.com:88/invoke/tp.receive/as2
    2009.05.05 at 15:06:05:485: Thread-15: B2B - (DEBUG) using SSL
    2009.05.05 at 15:06:05:486: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:send URL: HTTPS://TP.COM:88/INVOKE/TP.RECEIVE/AS2
    2009.05.05 at 15:06:05:487: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:send TO Endpoint: 502 https://tp.com:88/invoke/tp.receive/as2
    2009.05.05 at 15:06:05:487: Thread-15: B2B - (DEBUG)
    Protocol = HTTPS
    Version = 1.1
    Transport Header
    Content-Transfer-Encoding:binary
    Message-ID:<1396700:0:221@096997515>
    MIME-version:1.0
    Receipt-Delivery-Option:https://b2bserver.edu:55/b2b.IP_OUT_QUEUE
    From:096997515
    Disposition-Notification-To:[email protected]
    AS2-To:ZZ043073964T
    User-Agent:AS2 Server
    Date:Tue, 05 May 2009 22:06:01 GMT
    Disposition-Notification-Options:signed-receipt-protocol=required, pkcs7-signature; signed-receipt-micalg=required, sha1
    AS2-From:096997515
    AS2-Version:1.1
    Content-Type:application/pkcs7-mime; smime-type="enveloped-data"
    Connection:close
    Parameters
    -- listing properties --
    http.sender.timeout=0
    2009.05.05 at 15:06:05:847: Thread-15: B2B - (DEBUG) scheme null userName null realm null
    2009.05.05 at 15:06:07:519: Thread-15: B2B - (WARNING)
    Message Transmission Transport Exception
    Transport Error Code is OTA-HTTP-SEND-401
    StackTrace oracle.tip.transport.TransportException: [IPT_HttpSendError] HTTP encounters send error :401
    at oracle.tip.transport.TransportException.create(TransportException.java:91)
    at oracle.tip.transport.basic.HTTPSender.createTransportResponse(HTTPSender.java:748)
    at oracle.tip.transport.basic.HTTPSender.send(HTTPSender.java:560)
    at oracle.tip.transport.b2b.B2BTransport.send(B2BTransport.java:284)
    at oracle.tip.adapter.b2b.transport.TransportInterface.send(TransportInterface.java:837)
    at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1666)
    at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:900)
    at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1082)
    at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:126)
    at oracle.tip.transport.basic.aq.AQDequeuer.dequeue(AQDequeuer.java:331)
    at oracle.tip.transport.basic.aq.AQDequeuer.run(AQDequeuer.java:206)
    2009.05.05 at 15:06:07:520: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:send Error in sending message
    2009.05.05 at 15:06:07:520: Thread-15: B2B - (INFORMATION) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Request Message Transmission failed
    2009.05.05 at 15:06:07:521: Thread-15: B2B - (DEBUG) DBContext beginTransaction: Enter
    2009.05.05 at 15:06:07:521: Thread-15: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
    2009.05.05 at 15:06:07:522: Thread-15: B2B - (DEBUG) DBContext beginTransaction: Leave
    2009.05.05 at 15:06:07:523: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab [IPT_HttpSendError] HTTP encounters send error :401
    [IPT_HttpSendError] HTTP encounters send error :401
    2009.05.05 at 15:06:07:532: Thread-15: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:Runtime
    2009.05.05 at 15:06:07:533: Thread-15: BusinessLogicLayer - (DEBUG) Push Stack: updateBusinessMessage
    2009.05.05 at 15:06:07:540: Thread-15: BusinessLogicLayer - (DEBUG) Pop Stack: updateBusinessMessage
    2009.05.05 at 15:06:07:540: Thread-15: B2B - (DEBUG) DBContext commit: Enter
    2009.05.05 at 15:06:07:543: Thread-15: B2B - (DEBUG) DBContext commit: Transaction.commit()
    2009.05.05 at 15:06:07:544: Thread-15: B2B - (DEBUG) DBContext commit: Leave
    2009.05.05 at 15:06:07:544: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequest Exit
    2009.05.05 at 15:06:07:545: Thread-15: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage:
    ***** REQUEST MESSAGE *****
    Exchange Protocol: AS2 Version 1.1
    Transport Protocol: HTTPS
    Unique Message ID: <1396700:0:221@096997515>
    Trading Partner: ZZ043073964T
    Message Signed: RSA
    Payload encrypted: 3DES
    Attachment: None
    ***** REQUEST MESSAGE *****
    2009.05.05 at 15:06:07:546: Thread-15: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage Exit
    2009.05.05 at 15:06:07:546: Thread-15: B2B - (DEBUG) DBContext commit: Enter
    2009.05.05 at 15:06:07:546: Thread-15: B2B - (DEBUG) DBContext commit: Leave
    2009.05.05 at 15:06:07:548: Thread-15: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppInterfaceListener:onMessage processOutgoingMessage was successful, returning transport ACK to the transport layer
    Thankyou,
    Lavar

    When I telnet to the host, I get (Connection to tp.com closed by foreign host.
    I went to the TP URL and save the certificate as Base 64. I then loaded that into my wallet as a Trusted Certificate.
    I see TP.com in the wallet as a Trusted Certificate with an expiration date of July 28, 2010 and Key Size 2048.
    We still get the same 401 error message. The TP is saying that we are not receiving a certificate on their end. I guess that means there is a problem with encoding and encryption.
    I loaded the TP Verisign certificate into my browser as a CA Root.
    Now I get a pop up box, when I go to the website that wants me to choose a digital certificate.
    There are not any digital certificates to choose from, so I can only click OK or Cancel.
    After clicking OK or Cancel, I get prompted for a password.
    There seems to be trust isses between our server and the TP's server. :)
    I asked the trading partner to send me their Root certificate, in case they have a different Verisign certificate.
    Thank you,
    Lavar

  • Problem with error code 401

    Hi I had a problem yesterday with my receiver determination... I had an XICACHE update error along with
    SAP:AdditionalText>Error when reading HTTP destination: INTEGRATION_DIRECTORY_HMI.</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while refreshing the XI runtime cache</SAP:Stack>
    I have since seemed to of solved this problem while using SXI_CACHE and refresh...
    Now we are getting the following...
    <!--  ************************************
      -->
    - <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
      <Trace level="3" type="T">Channel for adapter engine: RFC</Trace>
    - <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
      <Trace level="2" type="T">no values in cache (no lock found) - start reading from SLD</Trace>
      <Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
      <Trace level="2" type="T">Adapter Framework(s) found</Trace>
      <Trace level="2" type="T">Service Port(s) found - take first one</Trace>
      <Trace level="2" type="T">URL found</Trace>
      <Trace level="2" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
      <Trace level="3" type="T">URL = http://mxavie0:56800/MessagingSystem/receive/AFW/XI</Trace>
      <Trace level="3" type="T">User = XIISUSER</Trace>
      <Trace level="3" type="T">Cached =</Trace>
      <Trace level="3" type="T">Creating HTTP-client</Trace>
      <Trace level="3" type="T">HTTP-client: creation finished</Trace>
      <Trace level="3" type="T">Security: Basic authentication</Trace>
      <Trace level="3" type="T">Serializing message object...</Trace>
      <Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
      <Trace level="3" type="T">HTTP-client: request sent</Trace>
      <Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
      <Trace level="3" type="T">HTTP-client: response received</Trace>
      <Trace level="3" type="T">HTTP-client: checking status code...</Trace>
      <b><Trace level="3" type="T">HTTP-client: status code = 401</Trace></b>
      <Trace level="3" type="System_Error">HTTP-client: error response= <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <html> <head> <title>Error Report</title> <style> td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;} A:link A:visited A:active </style> </head> <body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0"> <table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75"> <tr bgcolor="#FFFFFF"> <td align="left" colspan="2" height="48"><font face="Arial, Verdana, Helvetica" size="4" color="#666666"><b>  401 &nbsp Unauthorized</b></font></td> </tr> <tr bgcolor="#3F73A3"> <td height="23" width="84"><img width=1 height=1 border=0 alt=""></td> <td height="23"><img width=1 height=1 border=0 alt=""></td> <td align="right" height="23"><font face="Arial, Verdana, Helvetica" size="2" color="#FFFFFF"><b>SAP J2EE Engine/7.00 </b></font></td> </tr> <tr bgcolor="#9DCDFD"> <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td> </tr> </table> <br><br><br><br><br><br> <table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75"> <tr bgcolor="#FFFFFF"> <td align="left" colspan="2" height="48"><font face="Arial, Verdana, Helvetica" size="3" color="#000000"><b>  Authentication did not succeed.</b></font></td> </tr> <tr bgcolor="#FFFFFF"> <td align="left" valign="top" height="48"><font face="Arial, Verdana, Helvetica" size="2" color="#000000"><b>  Details:</b></font></td> <td align="left" valign="top" height="48"><font face="Arial, Verdana, Helvetica" size="3" color="#000000"><pre>  No details available</pre></font></td> </tr> </body> </html></Trace>
      <Trace level="3" type="T">HTTP-client: closing...</Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">Persisting message Status = 023</Trace>
      <Trace level="3" type="T">Message version 006</Trace>
      <Trace level="3" type="T">Pipeline CENTRAL</Trace>
      </SAP:Trace>
      </SOAP:Header>
    - <SOAP:Body>
    - <SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7">
    - <SAP:Payload xlink:href="cid:[email protected]">
      <SAP:Name>MainDocument</SAP:Name>
      <SAP:Description />
      <SAP:Type>Application</SAP:Type>
      </SAP:Payload>
      </SAP:Manifest>
      </SOAP:Body>
      </SOAP:Envelope>
    Anyone have ideas as to why this is coming?

    HI,
    Error: HTTP_RESP_STATUS_CODE_NOT_OK 401 Unauthorized
    • Check XIAPPLUSER is having this Role -SAP_XI_APPL_SERV_USER
    • If the error is in XI Adapter, then your port entry should J2EE port 5<System no>
    • If the error is in Adapter Engine
    –then have a look into SAP note- 821026, Delete the Adapter Engine cache in transaction SXI_CACHE Goto --> Cache.
    • May be wrong password for user XIISUSER
    • May be wrong password for user XIAFUSER
    – for this Check the Exchange Profile and transaction SU01, try to reset the password -Restart the J2EE Engine to activate changes in the Exchange Profile After doing this, you can restart the message
    Regards
    Chilla..
    <i>Points rewarded if it is helpful..</i>

  • Creative Cloud Installation Failed Download Error - Error Type -7 and Error Code - 401

    I subscribed to Creative Cloud in December 2012 and have been trying to install the applications, but the "Installation Failed" through the Adobe Application Manager. (see screenshot)
    Here is a line from my log file:
    01/08/13 11:08:48:346 | [WARN] |  | ASU | PDApp | DownloadError |  |  | 6120 | Download Error has come with GDE Error type - -7 and error code - 401
    I tried searching for the same error code in the "knowledge base" but couldn't locate any.
    I am on a Windows 7 (x64) machine. I also have CS5.5 installed.
    Anyone have this problem? Please help or point me in the right direction if you can. Thanks!

    Thanks Romsinha,
       I tried the above steps, with no luck.  I have admin rights on both laptop and desktop I'm trying to install to.  I have updated my AAM on both machines with no issue (when using the direct link above). But when I click the 'Try' link to download an application, it shows the scrolling status bar for a few seconds, then  "Installation Failed"  'Download error. Press Retry to try again or contact customer support. (-7)'   Retry only produces same results.
    Both machines are running Win 7 Pro - SP1 64bit
         (laptop - 16 GB RAM & Core i7-2760QM 2.40 GHz processor)
         (desktop - 8 GB RAM & Xeon W3520 2.67GHz processor)
    I am running in a corporate setting with I'm sure all sorts of Firewall protection etc...
    I'm planning on asking for a CC membership, but wanted to check out the new features first....
    Thanks!

  • Exception while calling ADS Inappropriate WSIL Invalid Response Code: (401)

    Hi Experts,
    Our ADS configuration was done on XCE a long time back and even reader credentials were installed and everything is working fine.
    Couple of days back, we enabled SSL configuration on the system. Even got the certificates signed by CA and HTTPS is also working without any problems.
    Then, problems are happening when we configured WebService SSL connection for ADS following the steps from
    http://help.sap.com/saphelp_nwce72/helpdata/en/90/71d273fa724cc9bb644ab00405e6f8/content.htm and also the SAP How to guide from: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d02262d8-7814-2c10-5c97-d855d38e9923?quicklink=index&overridelayout=true.
    Among other steps, I have created a View in Key Storage called "ADSCerts" and created an entry "ADSUser" as per the document, generated CSR request, imported CSR response and also the CA's root certificate.
    I exported the ADSUser-cert certificate from here and imported into Identity Management for the User ADSUser under its Certificates tab.
    Also updated SecureConfigPort_Document (in Destination Template Management under SOA Administration) security settings to X.509 Client Certificate and in Details, I have chosen the View ADSCerts and entry ADSUser.
    Even after all the steps as per the document and the help.sap.com link provided above, when I try to test this through a test URL
    (https://host:https-port/webdynpro/resources/company.com/test~wd/TestAdobeApp) that our developers have given me for this, I get a (401)
    Unauthorized error:
    500 Internal Server Error is returned for HTTP request
    [https://host:https-port/webdynpro/resources/company.com/test~wd/TestAdobeApp]
    com.sap.tc.adobe.pdfobject.base.core.PDFObjectRuntimeException:
    Exception while calling ADS; Inappropriate WSIL; configure the
    destination path
    correctly./ncom.sap.esi.esp.service.server.query.discovery.ExtendedServiceException:
    com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested
    URL was:"Connect to https://host:https-port/inspection.wsil/"
    I have checked the security log file and it shows:
    LOGIN.FAILED
    User: N/A
    IP Address: 192.165.90.102
    Authentication Stack: sap.com/tcesiesp~wsil*inspection.wsil
    Also, ran Security Troubleshooting Wizard from NWA and reproduced the problem while collecting these traces. There were some entries like:
    Login failed!
    [EXCEPTION]
    java.security.PrivilegedActionException:
    com.sap.engine.services.security.exceptions.BaseLoginException: Cannot
    authenticate the user.
    Caused by: com.sap.security.core.server.jaas.DetailedLoginException:
    Received no SAP Authentication Assertion Ticket.
    Received no SAPLogonTicket. Authentication stack:
    [sap.com/tcesiesp~wsil*inspection.wsil].
    Any idea how I can solve this? Anybody got this error?
    Thanks,
    Shitij

    Opened an OSS message with SAP and they told me that the certificates being generated from NWA are in a different format from what is accepted in user store.
    So, generated new certificates from OS level using sapgenpse and now it worked.

  • Returning HTTP status codes (401, 403, etc) to Flash 8

    Hi all,
    I'm using AMFPHP on the server-side and Flash remoting
    classes to communicate with it. Everything's working great, but i'd
    like Flash to be able to recieve HTTP status codes from the server.
    For example, if on the server side (in PHP) I go:
    header("Status: 401 Unauthorized");
    I'd like the remoting service on the flash side to be able to
    get the HTTP error code (401 in the example above).
    I know this is possible with
    [url=http://livedocs.adobe.com/flash/8/main/wwhelp/wwhimpl/common/html/wwhelp.htm?context =LiveDocs_Parts&file=00002333.html]LoadVars.onHTTPStatus[/url]
    but it doesn't seem to deal with using it with Flash Remoting.
    Thanks all :)
    - Nilesh

    Hi, I am trying to PUT to update contact info and I get following error:
    2015-01-16 11:00:17,970 INFO [main] oracle.eloqua.connector.eloqua.EloquaConnector.putWithBasicAuth(97) | accessHttpsPut.url=https://secure.eloqua.com/API/REST/2.0//data/contact/7606838, text={"id":"7606838","accountName":"openIdStr001","emailAddress":"[email protected]","type":"Contact"}
    2015-01-16 11:00:18,931 ERROR [main] oracle.eloqua.connector.eloqua.EloquaConnector.putWithBasicAuth(140) | ClientProtocolException
    org.apache.http.client.HttpResponseException: Request is malformed.
    Is there any idea?
    Thanks so much.
    Sincerely.

  • How do I fix error code 401 - "unauthorized" I am taking an online class and the videos worked before, and now whenever I launch QuickTime, I get that error code.

    I recently began taking an online class. We are required to watch multiple videos. I was able to watch the QuickTime videos before, but now whenever I launch the videos in QuickTime I get the Error code 401. My teacher does not know whats wrong, because I do have authorization to watch the videos, I am just not sure how to go about it.

    You may try updating the same as a standalone download.
    S.Sengupta, Windows Entertainment and Connected Home MVP

  • Guided Procedures - Invalid Response Code: (401) Unauthorized

    I'm trying to generate an impersonalized form in Guided Procedures. I got an error.
    I checked the SAP logs and the error is
    Invalid Response Code: (401) Unauthorized. The requested URL was:"http://hostXX:portXX/AdobeDocumentServices/Config?style=document"
    Before this error occurs I see an alert
    LOGIN.FAILED
    User: N/A
    Authentication Stack: com.adobe/AdobeDocumentServices*AdobeDocumentServices_Config
    Login Module Flag Initialize Login Commit Abort Details
    1. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule SUFFICIENT ok exception true Authentication did not succeed.
    I've checked the ADSUser and its not locked. Configuration and everything looks fine. I've tested the ADS connections too on SM59.
    We have similar configuration for DEV and its working fine there.
    Any help on this is highly appreciated.
    Version - SAP 2004s SP16
    Thank you,
    Srinivas

    Thanks everybody. Resolved
    Updated the HTTP Destination and Web Services Client with the password for ADSUSER again and restarted the services

  • BSNL and OTA Updates ..?

    What is OTA updates cycle for BSNL ..? Any word on this ..? or We should have to load leaked updates every time ..? I have Q10 

    Hello,
    Only BSNL can answer your question, for they control it.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • SD Card Slot Failed on K1 After OTA Update

    My SD card was working fine with the original Lenovo code (that rebooted every hour or so),  but once I took an OTA update,  SD cards can no longer be mounted or formatted.   It knows there is a card in there, because the "Mount" and "Erase" options become visible,  but neither actually mounts or formats the card.
    External USB storage does work,   and I have tested the SD before the external USB was mounted,  while it was mounted,  and after it was dismounted and removed.   The SD card is inaccessible in all cases.   It works fine in my Mac.
    I tried a 16gb formatted FAT32 and a 1gb formatted FAT16.
    Running K1_A301_02_02_110725_US
    Anything else I can try before I send it in for service?   Any idea how long that will take?

    With all the free space the 32gb K1 has, I never had the need for an SD card.
    I'll try a spare card of mine and see if it works for me.
    IT Specialist and Consultant
    Lenovo Tablet Evangelist
    Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
    Deutsche Community   Comunidad en Español
    Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

  • IPad 2 died during 5.0.1 OTA update. Any ideas?

    I wanted to update to 5.0.1 OTA and after it was half done the screen went black and I couldn't turn it on anymore. Connected to iTunes, I only have the option to restore the iPad but then I get the error message "The iPad could not be restored. An unknown error occured (3194)" and nothing happens. Hard reset also doesn't help. The screen is nothing but black. My firewall and network settings are all alright. I tried everything I found on the Apple website. Any ideas or similar experience with the OTA update?

    Thank you for that clarification.  I stumbled upon this page from Google link, and didn't factor that in.
    I was somewhat surprised and disappointed by the response I received from the Genius Bar rep.  He connected the iPad to his laptop to run some diagnostics, and told me that the issue was a hardware one and that my only option was to pay $250 to replace the unit.
    What I explained was that the unit was working fine quite literally up until I tried the OTA update to the latest OS...and that it literally bricked in the midst of that process.  This was met with the same response.
    The experience seemed somewhat unusual, given that I have had success with that store and exactly that same rep on various other device issues in the recent past.
    He didn't share any error code information, so I'll have to take a look at that at home. 
    My quick perusal of Google and the forums suggests that this issue is not unique to me/my iPad...or necessarily the coincidence that the rep suggested.

  • Error message : HTTP responce code: 401 Access denied

    Hi,
    I am working on Oracle OpenScript 8.5.
    After record the script when i click on playback I got an error message in the following Bold lines code.
    http.get(33, "http://fusion.satyam.com/idc/idcplg", http.querystring(http.param("IdcService", "GET_DOC_PAGE"), http.param("Action", "GetTemplatePage"), http.param("Page", "TRAY_SEARCH_FORM")), null, true, "iso-8859-1", "utf-8/");
    http.get(37, "http://fusion.satyam.com/idc/idcplg", http.querystring(http.param("IdcService", "SS_GET_PAGE"), http.param("siteId", "FCOE"), http.param("siteRelativeUrl", "%2Fhttp%3A%2F%2Fstclnx01.satyam.com%2Fidc%2Fidcplg"), http.param("ssUrlType", "2"), http.param("IdcService", "COLLECTION_DISPLAY"), http.param("hasCollectionID", "true"), http.param("dCollectionID", "42")), null, true, "utf-8/", "utf-8/");
    http.get(41, "http://fusion.satyam.com/idc/idcplg", http.querystring(http.param("IdcService", "SS_GET_PAGE"), http.param("nodeId", "13"), http.param("siteId", "FCOE")), null, true, "iso-8859-1", "ASCII");
    The error message in Result view is HTTP responce code: 401 Access denied .
    The error message in Console View is oracle.oats.scripting.modules.http.api.exceptions.ThinBrowserException: HTTP response code: 401  Access denied
    Note: When i comment that Bolded Code then the script was passed.
    Can any one help me... ..it's very urgent.
    Thanking you.
    Regards,
    Ramesh Dodda
    Edited by: Ramesh Dodda on Jun 11, 2009 1:27 AM
    Edited by: Ramesh Dodda on Jun 11, 2009 1:40 AM

    Hi
    Do you need a username and password to get to the application ?
    Regards
    Alex

  • Adobe Print Form Error - Invalid Response Code: (401) Unauthorized

    Hi, I've just configured ADS on Netweaver 2004s. I've run through the config guide and everything works ok including the form generation test report FP_TEST_00 which outputs PDF without issue. I have two problems:
    -When I run a "test connection" on the RFC destination 'ADS' using the ADSUSER for the login details, I get a 403 not authorized error. Changing this user to J2EE_ADMIN resolves the issue and I get a 302 redirect. I've tried adding other permissions to the ADSUSER without any luck.
    -Running a report on the Portal under e.g. Executive Reporting and attempting to just right-click and hit "Print Version" results in a 401 error for request "http://hostXX:portXX/AdobeDocumentServices/Config?style=document" exactly as per this thread: Re: Adobe Form Creation Error - Invalid Response Code: (401) Unauthorized. However, I've double-checked all user details in Visual Administrator (ADS_AGENT) and on the ABAP stack side in su01 and sm59. I also tried changing the users to dialog with no effect. If I go directly to that URL and log in with ADSUSER I get a 403 not authorised error (using J2EE_ADMIN is again successful). I've noticed that in the http access log the HTTP protocol used is 1.1 when using the web browser and 1.0 when using the sm59 connection test. I've heard of problems with using HTTP/1.1, but when I change the options on IE8 to use HTTP/1.0, it changes for all other requests except the request for "http://hostXX:portXX/AdobeDocumentServices/Config?style=document", which is still submitted as HTTP/1.1. Conversely, in sm59 if I specify that it should use HTTP/1.1 under Special Options, I can see from the access log that it is in fact still using HTTP/1.0. Could this be related to the 401 error code that I'm seeing?
    Any help would be appreciated. Thanks,
    John

    I think I've ruled out the HTTP protocol version as being an issue here. However I may have found more useful information on the actual issue.
    In the security log under usr\sap\<SID>\DVEBMGS00\j2ee\cluster\server0\log\system I see a different message for the unsuccessful report PDF generation attempt to that of a direct query to the same URL with the same web browser, as below. The unsuccessful attempt appears to forget the ADSUSER credentials and resort to the default J2EE_GUEST which has no authorisations and therefore fails. The direct query doesn't lose the ADSUSER credentials and I think this is because it prompts for the user/password when needed. Does anyone know why this happens for a direct query to this URL but not for the PDF generation attempt?
    Resulting logs from unsuccessful PDF generation attempt:
    #1.5 #005056AF1EB300750000002D0000142000048B4D2208F055#1279063306899#/System/Security/WS/SecurityProtocol#sap.com/irj#com.sap.security.core.client.ws.AuthenticationContext.setDestination#AICL0001#622##<host>_<sid>_3576650#AICL0001#4c1a62608ed511dfbe2a005056af1eb3#SAPEngine_Application_Thread[impl:3]_5##0#0#Info#1#com.sap.security.core.client.ws.AuthenticationContext#Java###An destination was set with the following properties:
    {0}.#1#{PROXY_ENABLED=false, CLIENT_AUTHENTICATION_KEYSTORE_VIEW=, SAP_SID=, SLD_URL=, USERNAME=ADSUSER, SLD_WS_NAME=, URL=http://<host>:50000/AdobeDocumentServices/Config?style=document, PROXY_URL=, SSL_SERVER_AUTHENTICATION=IGNORE, SLD_WS_SYSTEM_NAME=, PASSWORD=XXX, SLD_WS_PORT=, SAP_CLIENT=, DEFAULT_URL=http://localhost:50000/AdobeDocumentServices/Config?style=document, Authentication=BASIC, CLIENT_AUTHENTICATION_KEYSTORE_CERTIFICATE=, URL_CHOICE=Custom, SAP_LANGUAGE=}#
    #1.5 #005056AF1EB30072000000250000142000048B4D220A12ED#1279063306977#/System/Security/Authentication##com.sap.engine.services.security.authentication.logincontext#J2EE_GUEST#0##<host>_<sid>_3576650#Guest#4c1a62608ed511dfbe2a005056af1eb3#SAPEngine_Application_Thread[impl:3]_24##0#0#Info#1#com.sap.engine.services.security.authentication.logincontext#Plain###LOGIN.FAILED
    User: N/A
    Authentication Stack: com.adobe/AdobeDocumentServices*AdobeDocumentServices_Config
    Login Module                                                               Flag        Initialize  Login      Commit     Abort      Details
    1. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   SUFFICIENT  ok          exception             true       Authentication did not succeed.#
    Successful direct access of URL http://<host>:50000/AdobeDocumentServices/Config?style=document (click on rpData test and manually log in as ADSUSER):
    #1.5 #005056AF1EB30070000000250000142000048B4D3E260016#1279063778670#/System/Security/Authentication##com.sap.engine.services.security.authentication.logincontext#ADSUSER#675##<host>_<sid>_3576650#Guest#812f72008ed611dfa62d005056af1eb3#SAPEngine_Application_Thread[impl:3]_14##0#0#Info#1#com.sap.engine.services.security.authentication.logincontext#Plain###LOGIN.OK
    User: ADSUSER
    Authentication Stack: com.adobe/AdobeDocumentServices*AdobeDocumentServices_Config
    Login Module                                                               Flag        Initialize  Login      Commit     Abort      Details
    1. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   SUFFICIENT  ok          true       true                 
    Central Checks                                                                                true                  #
    #1.5 #005056AF1EB30070000000260000142000048B4D3E2666A6#1279063778702#/System/Security/Audit/J2EE##com.sap.engine.services.security.roles.audit#ADSUSER#675##<host>_<sid>_3576650#ADSUSER#812f72008ed611dfa62d005056af1eb3#SAPEngine_Application_Thread[impl:3]_14##0#0#Info#1#com.sap.engine.services.security.roles.audit#Java###{0}: Authorization check for caller assignment to J2EE security role [{1} : {2}].#3#ACCESS.OK#SAP-J2EE-Engine#all#

  • HP Slate 21 Kit Kat OTA Update Fix for Audio Quality and LAN Connectivity

    Recent Over The Air (OTA) update for Slate 21 Update
    Link to thread discussion here, fix listed below -
    ISSUE: 
    A previously applied HP Slate 21 Kit Kat Update (Android 4.4.2) over the air (OTA) update may have caused issues with audio quality or wireless LAN connectivity.
    Audio Quality: Bass response will be poor. Audio will play but bass frequencies will be lacking.
    WiFi Issue: 5 GHz band not functioning properly
    Status: 
    A new update (17r25.1-011-11-WW) has been released over the air (OTA) to end users
    Resolution:
    Apply update 17r25.1-011-11-WW
    If the user was previously on 17r25.1-010-10-WW then a Factory Reset should be performed to complete the resolution.
    I work for HP, supporting the HP Experts who volunteer their time and technical knowledge to help others.

    Pebbles65,
    Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
    English: http://h30434.www3.hp.com
    Spanish: http://h30467.www3.hp.com
    French: http://h30478.www3.hp.com
    Portuguese: http://h30487.www3.hp.com
    German: http://h30492.www3.hp.com
    Korean: http://h30491.www3.hp.com/t5/community/communitypage
    Simplified Chinese: http://h30471.www3.hp.com/t5/community/communitypage
    Cheers,
    KarolB
    I work for HP

  • IPad fails to connect to WiFi after OTA update to iOS 6

    After the OTA update to iOS 6 my new iPad fails to connect to my WiFi network at home. My LANCOM router reports the following issue:
    Index: 62294
    Zeit: 19.09.2012 21:08:28
    Interface: WLAN-1
    Ereignis: Rejected Association from WLAN station xx:xx:xx:xx:xx:xx []: ()
    Adresse: xxxxxxxxxxxx
    Grund: Cannot support all requested capabilities in Capability Information field
    It has worked flawlessly in the past with iOS 5 on my new iPad and iPhone 4. At the moment I hestitate to update my iPhone too.
    Anyone with the same issue or an idea how to fix it?
    Thanks in advance, greetings from Stuttgart (Germany),
    Jens

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

Maybe you are looking for