Outlook 2013 SEND AS Default

Hello,
We have Exchange 2013 and using Outlook 2013. is it possible to make SEND AS option as default sending e-mail option?

Please try the steps mentioned at: http://support.microsoft.com/kb/813745 and check whether the issue is resolved or not.
If not, then try starting the outlook in safe mode using (Outlook.exe /safe) and check the issue again.
Hopefully, these will resolve your issue.

Similar Messages

Outlook 2013 set as default mail client but still shows error box saying it isn't?

We have recently installed Office 2013 64-bit on 4 servers. We previously used Outlook 2007 64-bit.
We set Outlook 2013 as the default mail client and do not have another mail client installed on the servers. However when you first login you get an error message box that says you have no default mail client 'either there is no default mail client or the
current mail client cannot fulfill the messaging request'.
I have checked all defaults to be for Outlook 2013.
How can I solve this issue? I am an administrator.

Try different Method to set Outlook 2013 as the default mail client to check the result. Thanks.
Method 1:Set as default within outlook.
-File > Options > General Tab > select the "Make Outlook the default program for E-mail, Contacts, and Calendar"
check box.
Method 2: Set as default from the internet explorer.
-Tool > Internet Options > Programs Tab > Set programs
Method 3: Set as default from control panel.
1.Navigate to Control Panel\Default Programs\Set Default Programs
2.Click on the outlook icon on the left hand side.
3.Set as default.
We may also try to create anther windows user profile in the same machine to check if the issue still persists. Thanks.
Tony Chen
TechNet Community Support

Outlook 2013 sending email using template not working properly...

I've created several email templates by doing the following:
open new message
add some tekst in the body
save as > oft file
Now when I open such oft file I add some modifications in the body text and send the message. However, the send item does not contain the modifications I just made, only the text that was included in the template.
We're using Outlook 2013 SP1 (with all microsoft updates installed) with Exchange 2013 SP1 standalone server. Is this a Outlook or Exchange issue and how can I resolve this?
Thnx Remco

Hi Remco,
Please also try to start Outlook in safe mode and test again to check if this issue continues. To start Outlook in safe mode, press Windows key + R to open the Run command, type
outlook /safe and press Enter.
If problem continues in Outlook safe mode, please try creating a new mail profile and reconfigure your email account, then creating a .oft template to test this issue again. For your convenience:
http://office.microsoft.com/en-in/outlook-help/create-an-outlook-profile-HA102749460.aspx
Please let me know the result.
Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Outlook 2013 send & receive is very slow or freezes

Hello. I recently purchased Office 2013 to install on my new laptop at the beginning of February. Everything was working fine up until a couple weeks ago. I am having issues in Outlook 2013, specifically I am not getting emails or when I send
emails they show as being sent but the customer never receives them. I have 2 email accounts setup and both are scheduled to automatically send and receive every 1 minute but even if I hit send & receive manually nothing works. Eventually the send/receive
window will open and freeze, showing "processing" or that there are 60 minutes left in trying to receive a message! I have never had an issue like this before and I need it to be fixed so I can continue to communicate with my customers! Please help!

Does it throw any error code? Make sure the internet/network doesn't have any issues? Check whether the same mailboxes can be accessed in their webmail interfaces (say, OWA) and see you don't face any send/receive issues with that?
Do check whether you can repro the issue by opening Outlook in safe mode or not (Outlook.exe /safe)? If issue is not reproduced, then I would suspect one of the Outlook add-in may be causing this above issue.
You can check the send/receive groups. For more info, you can refer:
http://office.microsoft.com/en-us/outlook-help/why-use-send-receive-groups-HA102749372.aspx
Let me know how it goes.
DeVa, M.S., {MSFT} Please remember to mark the replies as answers if they help

Outlook 2013 send and receive setting

Hi all,
I have a strange Outlook 2013 problem. Occasionally, "Scheduled an automatic send/receive even XX minutes." setting in Send/receive page gets uncheck by itself. Sometimes, I notice that my emails are sitting in my outbox and when I check the send/receive settings, above
setting is checked off.
Has anyone else seen this issue and know of a way to prevent it from happening?
Thank you.
Ra

Hi,
There are several possibilities that may cause this issue.
1. A GPO setting may forbid the user to define Send/Receive Groups. If other users couldn’t check that checkbox, either, please verify with your administrator if there’s a Group Policy forbids that setting.
2. The 3rd-party services/add-ins could also be the possible reason, let's troubleshoot this from running Outlook in safe mode, to determine if it is 3rd-party add-ins related:
To start Safe Mode:
Press win + R and type ”outlook.exe /safe” in the blank box, then press Enter.
If there’s no problem in Safe mode, disable the add-ins to verify again:
1. FILE > Select Options
2. Under Options – click Add-ins and now you are able to disable Add-in for your Outlook
3. Once you have disabled the unwanted Add-ins, restart Outlook to apply the change
Feel free to post back. Thanks.
Tony Chen
TechNet Community Support

Outlook 2013 sending replies stuck in outbox problems

I have Outlook 2013 with a maddening problem! Please keep in mind that any solutions you may have should be answered so that
mildly tech savvy such as myself can understand. The problem mostly happens when I'm replying to an email but sometimes with a fresh email. When I hit send the email just stays stuck in my outbox and I get an error message 0x800ccc0F.
I'll open up the stuck email and hit send again and nothing still stays stuck. I spent a long time chatting with MS tech support and he had me uncheck/disable all of my add ins and all my emails sent! Great! Next day without making any changes I was back
to the same problem, then later they would send fine, a day later same problem - you get the picture for the last few weeks. Rechecking and unchecking the add-ins or restarting outlook or my computer sometimes helps but the problem persists. One interesting
note while on tech support I was replying to my own test emails to myself and they were staying stuck in my outbox, but also showing up in my inbox and not showing up in my sent mail folder -WTH??? Lastly I use Go-daddy SMTP email and did tech support
with them to check all of my outgoing settings and even tried some alternate settings which made no difference. Please help as I use Outlook for work all day and have spent countless hours trying to figure this out.

Hi,
Please use your webmail to check whether the email stuck in your Outbox or Draft folder. If the issue only happens in Outlook, please disable all anti-spam or any related mail programs to have a try. Also try to create a new Outlook profile:
http://support.microsoft.com/kb/829918/en-us
If it doesn't work, please change a computer to configure your email account in Outlook to check whether the issue persists.
Regards,
Winnie Liang
TechNet Community Support

Outlook 2013 sending duplicate emails to my Blackberry

I have spoke to Blackberry and Microsoft tech support but neither could find a solution. I have several email accounts on my PC running Outlook 2013 and on my Blackberrry Q10.
First, I receive an email on my BB. Then, I also receive a duplicate on the BB once I turn on the PC and connect to wifi. It can be many emails that come in all at once, all duplicates.
This does not happen, however, with every email account. I have several inboxes in Outlook, and it only happens with the email accounts that are associated with one of the inboxes.
That particular inbox is associated with a Microsoft Exchange server, but it does not happen with the Exchange account. I only get duplicates of emails from every account under that inbox.
Please help, thanks!

Hi,
What is the type of account configured in Outlook and Blackberry (POP3, IMAP or Exchange/MAPI)?
If you happen to have another smartphone (like an Android phone) around you, I'd suggest you have a try on it. This way, we'll know if Blackberry is the problem here.
I've just came across this thread in Blackberry support forum, it's well worth a look. Blackberry users had a thorough discussion on this issue:
Duplicate emails in BB inbox after using Outlook (Please Note: Since the web site is not hosted by Microsoft, the
link may change without notice. Microsoft does not guarantee the accuracy of this information.)
Here is a KB article from Blackberry Knowledge Base, which listed out few causes and related resolutions for the issue of duplicate emails on the BlackBerry smartphone:
http://btsc.webapps.blackberry.com/btsc/viewdocument.do?noCount=true&externalId=KB13528
(Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.)
Please take a look and see if any of the resolutions work for you.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

MS Project 2010 with Outlook 2013 - "send as attachment" missing function / not working

Office 2013 Professional running on Windows 7 (64bit).
After Re-installing MS Project 2010 today the option under
File (alt-f) --> 'Save & Send' --> 'Send as Attachment' is shaded out / unavailable.
Is this a known integration gap between the older MS Project and Current Outlook ? Alternatively, does anyone have any recommendations to troubleshoot and / or enable the function within MS Project 2010?
Thanks for any suggestions , guidance or pointers.
p.s I have tried completing a repair on Office 2013 and the MS Project 2010 from within the control panel.
This functionality is working with all other Office 2013 applications in the suite (Excel, PowerPoint, Word, Visio etc.)

Julie ,
Kinda / sorta ... In Mid 2014 I had MS Project installed and working (I can't confirm if the Send as Attachment was working at that time...) A few days ago I was sent an '.mpp' (MS Project file) for review. When I attempted to open it MS Project
gave me a warning message that it needed to start in safe mode but then failed to start. This seemed weird and thus began two days of googling and investigation.
I elected to uninstall (which also failed) and reinstall (which also failed) the MS Project 2010 since I have the media at hand to do so. At this point I was really truly 'stuck' (p.c term for the younger audience reading this).
My course of action was to engage Microsoft Support (specifically the MS Office group). They verified some registry entries, confirmed installation of MS Project 2010 , confirmed files were installed , available and in the appropriate
spots (files etc.) , tried a few 'fixit' tools , made multiple suggestions that I spend $1000+ on upgrading to MS Project 2013. After ~90 minutes or so they were able to 'Force' the orphaned installation to uninstall. (although
they needed to install and use a 3rd party tool to do it) We then re-installed MS Project 2010 and verified it could start.
After using project a little bit I realized that 'Send as Attachment' option was non-functional. I spent a few hours trying to research (more google) and finally threw in the towel and cried out for help (i.e posted the message that started this
thread).
Thanks again for any suggestions or wisdom you are willing to share.

Outlook 2013 error 0x80070043

Good day All,
I have an issue only with one particular user with her Outlook 2013. When I try to add and pst file or want to setup an account I get the following error. "An unknown error occurred, error code: 0x80070043"
The user connect to an Exchange 2010 server. Any help will be greatly appreciated.
Regards
Gerrit

Hi,
Did the user set any folder redirection before? Especially the default location it shows when you click File > Open & Export > Open Outlook Data File in Outlook 2013. By default, the location is:
C:\Users\%username%\Documents\Outlook Files
To verify this, we may open the Registry Editor and navigate to:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
Find the Personal value and check if its data is set to other path rather than
%USERPROFILE%\Documents. If this is the case, try changing the value to
%USERPROFILE%\Documents and then test the issue again.
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

What application do you use when setting mailto "outlook 2013"

I'm trying to set outlook 2013 as my default "mailto" What application do I use

Is it part of Office 2013 on your computer, or the online version?
For the version that installs locally, you should be able to follow the steps in this article: [[Change the program used to open email links]].
For the online version, you might need a URL to the compose page from Microsoft -- or perhaps it has been posted here before -- because Firefox may not be able to discover this information in the registry.

Send file as email not working when Outlook 2013 is default mail client

Have Adobe Reader XI 11.0.2 installed. Running Windows 7 Pro 64 bit with Office 2013 installed. When I set Default E-mail Application to Microsoft Outlook from Preferences I receive the following error trying to send any file as an e-mail:
"Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and set it as the default mail client."
I have toggled Microsoft Outlook 2013 off and back on as the default e-mail handler in the Default Programs of the Control Panel, but this has not resolved the issue.
I am guessing this may be a new bug since Outlook 2013 only recently came out, but if not, and someone has a fix, please let me know.
Thank you,
- Brian

Please try the steps mentioned at: http://support.microsoft.com/kb/813745 and check whether the issue is resolved or not.
If not, then try starting the outlook in safe mode using (Outlook.exe /safe) and check the issue again.
Hopefully, these will resolve your issue.

After upgrade to outlook 2013 Contacts have the default picture in reading pane

I'm using Windows 8 on a domain (using a domain account not a Microsoft account) connecting to Exchange, all my Contacts were outlook contacts with pictures and other data, I could see the picture of the contact in the reading pane and people pane while
using Outlook 2010.
After the upgrade to Outlook 2013 the contacts are not lost (I can see them in the People Hub) but it appears that they are unavailable in the reading pane because all I can see is the default picture (the default picture picture is also visible in the notifications).
If I put the mouse over the name of the people while in the reading pane all I can see is the card with the default info (the only data visible is that the contact is available in the next 8 hours), if I compose a new message and hover the name of the contact
i can see the card with all the data (picture, company, etc.).
Is this the default behavior in Outlook 2013 if you are in a domain and not connected to any service or there is a way to show the picture of my contacts in every part of outlook?

No, it should be available still. Did you recreate this mail profile after the upgrade?
Try forcing a complete update of the Office Line Address Book via the Send/Receive tab-> Send/Receive Groups-> Download Address Book
Otherwise, reset the OAB by renaming your oab-file to .old when Outlook is closed. You'll find them here:
C:\Users\%username%\AppData\Local\Microsoft\Outlook\Offline Address Books\<Account GUID>
Robert Sparnaaij
[MVP-Outlook]
Outlook guides and more: HowTo-Outlook.com
Outlook Quick Tips: MSOutlook.info

Outlook 2013 - User cannot send email to one person

One of our users got a new computer and is running Outlook 2013. They can send emails with no trouble, except to one of our other users. It always
gets rejected and the sender gets an email telling them the one they tried to send was undeliverable. She's running Windows 8.1.
1. Both the sender and the receiver are using Exchange accounts
2. Both computers are on the same network, but neither are on a domain.
3. Error message: The e-mail address you entered couldn't be found. Please check the recipient's e-mail address and try to resend the message. If the problem continues, please contact your helpdesk.
Diagnostic information for administrators:
Generating server: ORD2HUB16.mex05.mlsrvr.com
IMCEAEX-_O=MEX07a_ou=Exchange+20Administrative+20Group+20+28FYDIBOHF23SPDLT+29_cn=Recipients_cn=[REDACTED]@mex05.mlsrvr.com
#550 5.1.1 RESOLVER.ADR.ExRecipNotFound; not found ##
Original message headers:
Received: from ORD2MBX01H.mex05.mlsrvr.com ([fe80::11f4:d169:375f:62d2]) by
ORD2HUB16.mex05.mlsrvr.com ([fe80::be30:5bff:feee:c7c4%15]) with mapi id
14.03.0169.001; Tue, 10 Jun 2014 11:47:07 -0500
Content-Type: application/ms-tnef; name="winmail.dat"
Content-Transfer-Encoding: binary
From: [REDACTED[ <[REDACTED]>
To: "[REDACTED] ([REDACTED])" <[REDACTED]>
Subject: email
Thread-Topic: email
Thread-Index: Ac+Ey3p8UrbavpbVRTiY+U9PepgJ0Q==
Date: Tue, 10 Jun 2014 11:47:06 -0500
Message-ID: <[email protected]com>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator: <[email protected]com>
MIME-Version: 1.0
X-Originating-IP: [23.24.160.6]

Hi,
How does the user fill the "To" field in a new message? If she fill it via auto-complete cache, please try to delete the auto-complete cache entry via clicking the "X" icon and then type the email address in the "To" filed. Send the email and check
if this issue continues.
For more causes and troubleshoot steps about this issue, please refer:
http://technet.microsoft.com/en-us/library/dn479208(v=exchg.150).aspx
Regards,
Steve Fan
TechNet Community Support

Unable to send email POP3 email from Outlook 2013 unless signed on as local admin

Windows 7 Outlook 2013
I recently upgraded from Office 2010 to 2013. For several weeks everything ran smoothly but a few days ago I noticed that my Verizon POP3 account was unable to send mail - items just sit in outbox. I have deleted/added the account and the profile
multiple times, this will solve the problem for a few days but then it returns again. I discovered that if I run Outlook as an administrator the mail will send without a problem. I have checked permissions on the pst file and do not see any issues.
Sometimes but not always I receive a message on the POP3 send that there was no network connection check mode. The send test message in the account set up never has a problem - it's only the periodic Outlook sending and receiving when the problem occurs.
Any ideas?
Thanks.
enagy

Hi,
Since the problem could be be solved for a few days by deleting/re-adding the profile and the account, the problem may be related to the .pst file. When the problem comes back, run Scanpst.exe to repair the. pst file, will the problem be fixed again?
Learn how to use Scanpst.exe:http://support.microsoft.com/kb/272227/en-us
We can also assume there are other programs that are interacting with the .pst file, reboot and disable the possible programs to test if this makes a difference.
If you're disconnected, you'll also need to check the network cable, try restarting your computer, or contact your Internet Service Provider or your system administrator. This implies the issue may be related to the anti-virus program or the firewall settings,
which may be scanning the outgoing emails from Outlook. We can disable them temporarily to send the emails again, check if this helps.
Regards,
Melon Chen
TechNet Community Support

How do you change the default font in Outlook 2013?

I am trying to set the default font in Outlook 2013 as per the customer's request and am having no success.
First I create a NormalEmail.dotm file and added it to the Office Customization Tool, created an msp and added it to my package. After installing Office 2013 I check and the NormalEmail.dotm
is on the machine in %appdata%\Microsoft\Templates folder waiting to be loaded. When launching Outlook 2013 on first run it renames my NormalEmail.dotm to NormalEmail15Pre.dotm. I created the file in Word 2013 so it's not a 2010 version and it (NormalEmail15Pre.dotm)
open cleanly in Word 2013 (it does not open in compatibility mode). If I close Outlook and rename NormalEmail15Pre.dotm back to NormalEmail.dotm Outlook opens and uses my template without any issue. This is not a solution as I have 1000's of deployments
and can't do this manually. One other thing, I did have this same problem with the default font in Word 2013 but by implementing a registry setting (HKCU\Software\Microsoft\Office\15.0\Word\Options\MigrateNotmalOnFirstBoot = 1) it used my Normal.dotm
template on first run, if such a setting exists for Outlook I can't find it.
Also I did try to set the font through the mailsettings (HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Common\MailSettings) in the registry as we did with O2007 and O2010 but
those do not load into Outlook when tweaked.
http://blogs.technet.com/b/odsupport/archive/2009/04/24/how-to-deploy-specific-fonts-in-office-2007.aspx
Thank you for your help.

Hi, I found out how you can set it.
You need two registry keys to be set in order to keep the preloaded settings.(HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Common\MailSettings)
These are:
[HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Common\LanguageResources]
"LangTuneUp"="OfficeCompleted"
"OutlookChangeInstallLanguage"="Yes"
both are String entries.

Outlook 2013 SEND AS Default

Similar Messages

Maybe you are looking for