Pages format that unfolds?

For years I've been using Microsoft's Publisher to create a newsletter. It's one sheet of A4 paper printed on both sides and is folded twice so it can stand up.
Fold 1 is horizontal, fold 2 is vertical
(I have more material printed on the 'inside' but that is just a whole page, easy.)
My question: is there a template within Pages that will accommodate the preparation and printing of this, please?
Thanks in advance!

Create four text boxes in the page.
Insert datas in each box.
When it's OK, rotate the two boxes which must be printed backward.
Yvan KOENIG (VALLAURIS, France) vendredi 27 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account  is : http://www.box.com/s/00qnssoyeq2xvc22ra4k

Similar Messages

  • HT4168 I have written a family history in Pages format that I would like to have printed in hard copy format to give to my family. Any suggestions as to to do that?

    I have written a family history in Pages format that I would like to have printed in hard copy format to give to my family. Any suggestions as to to do that?

    Try a google search on "self publish" to find things like
    http://www.lulu.com/publish/books/

  • Second o/p been printed from first page due to page format

    Dear All,
                     I have created a new page format with width 210 mm and height 290 mm and included it a smartform for invoice printing that I have created.The problem is that when i take a printout of the invoice program it prints the first page perfectly,but when I take printout of the next invoice,it starts printing from the same page itself ,hence the second invoice is printed on the first and the second page .Other page formats are been printed correctly.The problem is only with the this page format that i have created.Even if i Change the width and height of the page format from SPAD ,the output remains the same.Please help.
    Thanks in advance,
    Subhabrata Choudhury.

    Hi,
    I am not sure which device type you are using, but it is possible you need to add some commands in the sections below from SPAD:
    SPAD -> Full Admin -> Device Types  -> <Device Type> -> Formats -> <Format> -> End of page
    E.g. In a windows device type like SAPWIN, the command  below is needed:
    formfeed
    \f
    This ensures that there is a formfeed after each page. You can check the standard page formats such as DINA4 to see which commands are required for your device type. Also for some device types, commands are needed in the printer intialization section for your custom page format to tell the printer the length of the page.
    SPAD -> Full Admin -> Device Types  -> <Device Type> -> Formats -> <Format> -> Printer Initialization
    Again you can check the standard page formats like DINA4 or LETTER as a reference.
    Regards,
    Aidan

  • How do I format a table in Pages so that I don't have to keep reformatting every time I go to a new cell?

    how do I format a table in Pages so that I don't have to keep reformatting every time I go to a new cell?

    Hello Fruhulda
    Clicking a Pages table don't give the same result than clicking somewhere in the table then pressing cmd + a.
    The first scheme selects the table (height square handles displayed)
    The second one select every cells (no handle displayed).
    If we try to fill cells with a color in case 1, only standard cells are filled.
    If we try to do the same in case 2, every cells (headers included) will receive the color.
    Yvan KOENIG (VALLAURIS, France) dimanche 12 février 2012
    iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.3
    My Box account  is : http://www.box.com/s/00qnssoyeq2xvc22ra4k

  • Conditional formatting based on page number that resets on repeating frame

    Hello everyone,
    I have searched through multiple forums on multiple sites and haven't come across anyone who has accomplished this.
    I have a report with pages numbers that reset on a repeating frame.
    I have a text boiler plate that I want to only show up on page 1. On every occurrence of page 1.
    SRW.GET_PAGE_NUM does not work because it returns physical page number.
    I'm trying to access the value of the field for my page number. The value comes from "source" drop down with value of "Page Number".
    I've tried accessing the <&page number> in the PL/SQL of my conditional formatting trigger but no luck.
    This report is 14K plus pages so I'd rather not be inserting and selecting the value back out of the database.
    Does anyone have any ideas??
    Thanks,
    Alan

    To avoid inserting/selecting from the database
    Maybe you could create a small package on the database to store page numbering information.
    Then use get/set routines per your requirements.
    CREATE OR REPLACE PACKAGE rep_page_no IS
       gPageNo NUMBER;
       PROCEDURE set_it(pPage NUMBER);
       FUNCTION get_it RETURN NUMBER;
    END rep_page_no;
    CREATE OR REPLACE PACKAGE BODY rep_page_no IS
       PROCEDURE set_it(pPage NUMBER) IS
       BEGIN
          gPageNo := pPage;
       END set_it;
       FUNCTION get_it RETURN NUMBER
       IS
       BEGIN
          RETURN(gPageNo);
       END get_it;
    END rep_page_no;Then in your repeating frame you could access this package rather than insert/select from any database table.
    Let me know if this works, I might like to try it.
    Thanks

  • Best small format that can play automatically in a web page

    I did two videos that I want to play in web pages when the page opens. In m4v format they are 5.8 MB and 15.6 MB. Way too big for connections here. I've tried shrinking to 3gb format, and they are now a little small, but very clear. But when the web page comes up, a message comes up and asks what you want to open it with, then downloads the video in another window.
    What is a good small format that plays automatically in the page?

    if you highlight the movie in iWeb, and open inspector and go to the QT logo at the far right and click on it you can check "autoplay.
    rr

  • Changing Pages Format So That a PC Can Open It..?!!

    I wrote an essay using Pages, sent it to my professor but he apparantly can't open it with the format that is used by Pages.. I was shown a long time ago how to change the file type, but I forgot, PLEASE help if you can, I have to get back to him immediately!!!!!!!!!!!!!

    Hi CSwedo
    Welcome to the forum.
    Spend some time and look for the obvious choices in the menus (there are 4 methods of Saving as or Exporting).
    Also read the Pages09_UserGuide.pdf downloadable from under the Help menu, where there are also video tutorials.
    Peter

  • Page Format different than doc

    I have converted a pdf file to a word doc so I can insert into my document but the margins are different and the form is being cut off when I insert.  I cannot change the margins on my document do to the large content. How can I get it to fit?

    Hello Peter,
    All our projects reside on a shared network drive. We both
    have access to them. When I say "my PC" or "my partner's PC", I
    mean that the project is open on my or my partner's PC. But it is
    the same project, not a copy of the project.
    We tried your suggestion, and both projects generated letter
    size documents on my side, and A4 documents on her side.
    Since my original post, we have reinstalled RH as suggested
    on a different message board. This did not solve this problem. We
    have checked and installed update files from the Adobe site - no
    change. We've even had our techies poke around, but they couldn't
    come up with anything.
    Our only working solution so far is to generate the Word
    document and change the page format manually. Which doesn't sound
    too bad, except that 2 of our projects each require 17 different
    pdf files - so it makes for a lot of manual attention as opposed to
    a simple "Batch Generate".
    As I wrote in my first post, I'm not sure if this is a RH
    issue, so I really appreciate any help you can provide.
    Thanks
    Ben

  • Cannot open Pages documents that I've worked on.  I open a new document, work on it, then save and close it.  When I try to open the document again, I get the following message: The document "[name]" could not be opened. The file isn't in the correct form

    I cannot open Pages documents that I have worked on and saved.  When I try to reopen Pages documents that I've saved, I get the following
    message:
    "The document “[name of document]” could not be opened. The file isn’t in the correct format.
    The file might be corrupted, truncated, or in an unexpected format."
    I have downloaded the latest update to iWork, but that doesn't help.
    I use Mac OSX 10.6.7
    I am using Pages '09 version 4.0.5 (852)
    If anyone can help, I would greatly appreciate it.
    Best regards,
    New York Mac User

    A few general trouble shooting tips that may apply here:
    1. If you used Software Update to do the OS update(s) to reach 10.6.7, go to http://support.apple.com/downloads/ and download and apply the Mac OS v10.6.7 Combo Updater. The Combo Updater contains some fixes that were not included in the incremental updaters used by Software Update.
    1a. Check that you have the current version of Pages (and of the other iWork applications) installed. All three applications' current version numbers end in .0.5
    2. A common cause of malfunctioning applications is a corrupted preferences file (.plist file). Your Pages '09's plist is at yourname > Library > Preferences > com.apple.iWork.pages.plist
    Quit Pages, locate the file and Drag it to the Desktop (or to the Trash).
    Restart Pages and attempt to open one of the files.
    If all is well, Trash the plist file and empty the Trash.
    If there's no change, AND you've made changes to the Preferences that you wish to keep, drag the file back to its previous location, replacing any new one that has been created.
    Regards,
    Barry

  • Is there any way to keep a photo/text box  where you placed it after it is checked as inline, I have text wrapping around many photos-Pages seem to move the photos to the middle of the page and that will not do for my project.

    I have a book I want to sell as an EPUB when done...only one problem I got the message when doing so: " floating objects aren't supported in ePub format" So I found out by checking inline format that will work but it moves the text box and photo to where it want to go and not where I want it to be...this will not work so how do I make it stay where I place it and still save without the error of floating object issues.... In addition, when I let it go where it wants to go it lets me stay as an ePub and takes me to iTunes producer ( I have my books on iTunes made with iBooks Author) and is this right...I want to make it ready as an ePub not for Apple but for other eBook readers... Can anyoe help? Thanks

    I copied text & paisted it and then draged the 3 photos from the file...then clicked on the photo then clicked the inline boxon tool bar nexed to floating one and that is how I did it
    I do not know what you mean "cut & paist"  how do I get the photo in from my picter folder if I do not drag it to the page in Pages? 
    I went to my photo folder and copied a photo and paisted the photo on the top left part of the page and it went there but there was no text to the right of photo...I could crop the photo to what ever size but no text to the right of photo...
    This is just too big of a mess of a program as it should be easier then this,,,I hav e 300 photos in this project and would have to re-paist them all...that is nuts...
    I see the button to the right of inline and floating that has 6 [lace to have the photo but the text does not float around the photo...
    If this is what your talking about this very little freedom in my page layout as I need it to let me place it where I need it to be and the wrap the text...
    There has to be an easier way to get my books ready for other formats other that Apple's iPad...iBooks Author was way eisier to make ready for iTunes...Love that program!!!
    Want my books for sale on all the other formats and was told by Apple Pages whould do it...
    I must be be out to lunch or the designers at Apple are ???

  • New Page Format in Smartforms

    Hi All,
    I am working on smartforms.
    I have created a new page format of width 25 cm and width 30cm according to client's requirement.
    Smartform is  for customer invoice which is a pre-printed and i have to get data into that.
    In sform i have given the my own page format name.
    Now problem is am getting print preview correctly but while giving print its givivng the error
    ' OUTPUT COULD NOT BE ISSUED' and print is not coming.
    Please help me regarding this issue.
      Thanks in advance.
    Regards,
    Murthy.

    Hi,
    I have checked it but its ok.
    I have created page format through SPAD only.
    Regards,
    Murthy.

  • Creation of new page format

    Hi
    I have created new page format and added it to format and then to device by using SPAD.
    This new page size is 8 X 6 Portrait( Is there any standard sap page format available with this size)
    the problem is that when print out is taken by using script the first page of the first document is correctly printed , But from second document onward the printer scrolls more than required, the print out is taken in continues page.
    Where to set the scrolling space and all
    Hoping help

    I think it is Printer problem. Check your printer settings.

  • How do I switch from 1 page format to 2 page format? ibooks won't let me switch back to 2 page after I clicked on 1 page format.

    I had clicked on 1 page format on one of the books I have in my library. Since doing this, it won't allow me to click back to 2 page format. Under the view tab, when i scroll down to that area, 1 page is in black with a check mark next to it, and 2 page format is in gray which usually indicates that this sinot an option. I tried removing the check next to 1 page format, but it doesn't seem to help. I would appreciate feedback on resolving this.

    Adobe Education... Start here https://creative.adobe.com/join/edu
    Education Plan https://creative.adobe.com/plans?plan=edu
    When you buy an Education subscription, the terms you "click to agree" should be clear about the first/later years
    -One Year Intro Price http://forums.adobe.com/thread/1448933?tstart=0
    http://www.adobe.com/products/creativecloud/students.edu.html
    http://www.adobe.com/education/students/student-eligibility-guide.edu.html
    Redemption Code https://creative.adobe.com/educard
    ID Proof http://www.adobe.com/store/au_edu/academic_id.html

  • Save as PDF Page Formatting

    Hi All,
    I built a tool in Excel 2007 which allows the user to publish a formatted output to PDF.  To get around the fact that the excel pulls the printer metrics from the active printer, I had the tool load up the MODI printer and use its metrics so I always
    had a consistent borderless printer driver source across all users and all was well.
    I have a problem on the horizon though, my work is moving their OS across to 64bit Windows 7 and the MODI does not run on 64bit.
    Is there a way to manually define the printer metrics and force excel 2007 to use those as a pass through when creating a PDF, alternatively can I just tell it to ignore the active printer like you can in word?
    Failing that Is there a better fixed page formatting method in either Excel 2010 or 2013?

    Hi,
    Do you mean that you built a tool to load up the MODI printer and use its metrics, but the the MODI does not run on 64bit, so you want to manually define the printer metrics?
    Since You said you want to manually define the printer metrics and I think the issue is more related to the feature of Excel, I'd like to move it to Excel IT pro forum.
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
    Thanks for your understanding.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Footer should be print on last page in multiple page format

    Hi expert,
    I designed form for invoice print ,in that for multiple pages footer should be print on last page only and hight of the main window should be increase (means if footer will display on last page then space of footer should be used for main window in multiple
    page format) 
    for eg .if i have 12 item so 5 items displyed on each page but i want to print 10 item on first page and remaing on second and after that i want to print footer.
    Regards,
    Jyotsna

    Hi,
    Has you tried to create a "new page" copy of FIRST, and make it the LAST_PAGE... On it you are going to create the desired footer.
    The Page Secuence will be something like this:
    If you are trying to print 12 items, then PAGE 1 (10 items) -> LAST_PAGE (2 remaining items).
    Hope it helps you...
    Alexis Sanchez N.
    SAP ABAP Development Consultant
    Molen Services and Consulting, C.A.

Maybe you are looking for