Password issue with ESW 520 switches

I was wondering if anyone else has run into or noticed an issue with passwords using these switches.  I've set up 5 or 6 in the past couple of months and have confirmed it is an issue with both the 2.0.3 firmware and the latest 2.1.16 firmware.
The issue is that you cannot use an & in a password.  That is to say, you can use it when setting your new credentials for the switch but once set, you cannot login using this password any longer.  I've tested these passwords over and over, making sure I didn't slip off the shift key by removing caps or substituting a 7 instead of the & symbol.  I have NOT tried any other special characters but I can confirm that numbers work just fine.

Sounds like a bug Chris.
On Jul 9, 2010, at 10:29 AM, "c.holloway"

Similar Messages

  • Password issues with my playbook

    Hello,
    i am a new member trying to get help for recent password issues with my playbook

    Is this about exactly the same issue as you just posted about in this thread?
    If so, please click on "Accept as Solution" next to my answer, and we can keep the discussion in that other thread (where you've posted more detail than you did here).
    Peter Hansen -- (BB10 and dev-related blog posts at http://peterhansen.ca.)
    Author of White Noise and Battery Guru for BB10 and for PlayBook | Get more from your battery!

  • Issues with a SGE2000 switch

    It seems that the SGE2000 switch will lose the connections of systems after some period of time. I will ping a system and it will be slow or will not reply at all. See example below: C:\>ping 10.1.16.16 Pinging 10.1.16.16 with 32 bytes of data: Reply from 10.1.16.16: bytes=32 time=102ms TTL=63 Reply from 10.1.16.16: bytes=32 time1ms TTL=63 Reply from 10.1.16.16: bytes=32 time1ms TTL=63 Reply from 10.1.16.16: bytes=32 time1ms TTL=63 Ping statistics for 10.1.16.16: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 102ms, Average = 25ms C:\>ping 10.1.16.16 Pinging 10.1.16.16 with 32 bytes of data: Reply from 10.1.16.16: bytes=32 time1ms TTL=63 Reply from 10.1.16.16: bytes=32 time1ms TTL=63 Reply from 10.1.16.16: bytes=32 time1ms TTL=63 Reply from 10.1.16.16: bytes=32 time1ms TTL=63 Ping statistics for 10.1.16.16: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms I have made two changes; 1)The Aging Interval 630 the max. 2)Static MAC address entry. But nether of these changes have helped. Has anyone see issue with the SGE2000 switch? Thanks

    Thanks for the info. I have the latest firmware on the switch and resetting it doesn't help. I am route 7 IP networks via this switch with 24 systems on each network. I have statically added some of the systems MAC addresses to see if that would help, but same issue.

  • Logitech Keyboard Issues with Fast User Switching

    I'm running OSX 10.4 on an 800 MHz iMac, and using a Logitech Cordless Navigator keyboard. The keyboard's main feature (for me) is the ability to have the function keys (F1-F12) automatically open applications and folders and such. When I have multiple accounts running though, this feature seems to be tied to whichever one I first logged into. If I switch accounts and try to use one of the keyboard shortcuts nothing happens where I am, but when I switch back to the original account I find that the keyboard has opened the program there. The keyboard types fine in the new account, and I can even change the preferences so the function keys do different things in the different accounts, but the extra functionality seems to be only available for whichever account logs in first.
    I realize this may just be a Logitech bug, but any ideas how to fix this? (Also even though I'm the only one using my computer this seems like a mild security issue, if theoretically another user could activate programs on my account without the password.)
    800 MHz iMac G4   Mac OS X (10.4.3)   768 MB RAM

    Logitech support is frustrating:
    Dear tajmahall14,
    Thank you for your recent inquiry about your Keyboards.
    I understand you are having issues with the settings for the function keys becoming non-functional when fast switching from one user account to another.
    Depending on the system configuration, the Fast User Switching may or may not work. Unfortunately this is not an issue I can address. You may need to contact Apple to see if they have a possible solution to your problem.

  • Slow dhcp with ESW 520

    Hi ,
    it's probably a setting to do on ESW 520 but all my DHCP is slow when I use ESW 520.
    With an other switch, I haev no problem.
    Any Idea?
    Thanks

    Hi Thomas,
    I have already define the Profile type (Desktop, Switch,...) with the VLAN for all the port.
    But before make something wrong with the spanning tree configuration, I have one question, I learn that port fast negotiation shouln't be use with Switch Port Role but Only with Desktop Port Role. Can you say me if it's right?
    Thanks for your answer.

  • Issues with Small Business Switch config

    Hi, I know that if I read the documentation I will come to the answers but I would really like some input from someone with more knowledge than me. I have an issue with Cisco SF300 , one of the Small Business Switches. I have a single interface on my router and I need to separate my internal networks , I thought that one way would be to use VLANs. On my two internal networks one network only has unmanaged D-Link switches, the other has the Cisco SF300 so I did as follows. 
    On the Cisco Switch, all ports default to Trunk ports. I have changed FE1-FE24 and GE1-2 to access ports.
    Created two VLANS and placed FE1-FE24 in VLAN10 (also my management VLAN) , GE3 is a trunk Port for VLAN20 untagged, VLAN 20 uplinks to my DiLink Switches. This way traffic from my unmanaged switches comes in on a trunk port untagged on VLAN20.
    GE4 is a trunk port and I have assigned  VLAN1 untagged, VLAN10 tagged and VLAN20 tagged. VLAN 10 and VLAN 20 then forward to my Router.
    The plan was to connect GE4 to my router however I had two things happen I can not explain.
    Firstly as soon as I connected my D-Link to GE3 the LAN on VLAN20 went down, I could not ping Servers from PCs etc, all devices are connected to the unmanaged D-Links. Secondly the VLAN Assigment changed on GE3 and GE4 , VLANs 10 and 20 disappeared and only the default VLAN was assigned, also under VLAN Settings my VLAN interface state for VLAN20 shows Disabled. Also one of my access ports FE12 keeps changing VLAN.
    Can anyone offer any suggestions as to what might have crashed the LAN and why my VLANs change. I did write my running config to the start up config by the way.
    I added two screen shots. 
    I would seriously appreciate some help.
    Thanks 
    Bob

    Hi Garrett, thanks for your reply to my post, I hope you are well. I called Cisco support, they told me that they could not understand why this was happening and suggested a firmware upgrade, usually something I should have considered right from the beginning. This solved the issue for me.
    Thanks
    Bob

  • Issues with iMessage when switching data carrier (wifi - cellular)

    So I have had this issue with my 5S and now my 6+ in iMessage. Not *always* but often enough I've run into issues sending messages via iMessage when I associate with wifi in that they don't send. I'll get an error message saying "not delivered" and it will stack as many outgoing messages I try to send. However, if I force the first message to send as text, subsequent messages will go through afterwards without issue. If I go from wifi to cellular I have no issues whatsoever and when I have these issues on wifi, my data works fine (incoming emails, Facebook notifications, etc.). I used to run cellular data only because I had unlimited but now I have a cap so I intend on using wifi when possible...but to have to send my first message as a text just so I can use iMessage is annoying...

    Hi there BigDogg795,
    I would recommend taking a look at the troubleshooting steps for iMessage found in the article below. 
    iOS: Troubleshooting Messages - Apple Support
    To resolve issues with sending and receiving iMessages, follow these steps
    Check iMessage system status for current service issues.
    Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
    Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
    iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
    Restart your device.
    Tap Settings > General > Reset > Reset Network Settings on your iPhone.
    If you still can't send or receive an iMessage, follow these steps
    Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
    Make sure that the contact you're trying to send a message to is registered with iMessage.
    If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
    Back up and restore your device as new.
    -Griff W.

  • Pop Account Password issues with Snow Leopard

    Since upgrading to Snow Loeopard my mail account will not accept my password, every time I connect with Mail it comes up with an error message stating that the pop server hasn't accepted my password - Help

    Same with me, the entire Modifier Keys settings pane for the Apple Keyboard does nothing, not just the Caps Lock setting. It works fine for the built-in MacBook Pro keyboard, but not for the external USB Apple keyboard. This worked perfectly fine on Leopard, but after upgrading to Snow Leopard it doesn't. How'd they break this??!
    Message was edited by: troyh3

  • Issues with clock - keeps switching to incorrect time?

    The clock on my Iphone 5S keeps changing to a different time, at 8AM is said it was 2. I restarted it and it worked for a little while then went back to 2 again. It has done it two more times today... I have not done the most recent software update to my phone.

    Hey abcal,
    Thanks for the question. If I understand correctly, the time keeps changing. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    iOS: Troubleshooting issues with date and time
    Thanks for using Apple Support Communities.
    Cheers,
    Mario

  • Password Issues with Charter Mail Account

    Hi,
    I am setting up my new iPad Wi-Fi 4G with my email accounts for Charter. With this I have run into the following issue:
    -email accounts with only alpha or only numeric passwords work fine.
    -email accounts with a alpha/numeric passwords will not work. A user name or password incorrect error is received.
    All email accounts are valid and passwords validated. The support people at Charter have also confirmed this. Additionally, I have tried cutting and pasting account information in to make sure no typing errors occurred.
    The support people at apple have had me reset the iPad and then totally reloaded the software, of which neither resolved the issue.
    At this point an Apple senior advisor was contacted and I was told to contact Charter and see if they could change my passwords to all alpha or all numeric characters. This was the only action apple support could give. This however cannot be done due to new password guidelines at Charter.
    Has anyone else found this issue and resolved it?
    Regards,
    SSS

    I am not experiencing this problem on iPad2 .. my charter password has alpha & numeric characters in it.  HOWEVER, I did find that the charter username for HBOGo was my charter email & email password and NOT the user name & password I set up when I was setting up HBOGo the first time.  Maybe something like this is the problem, and not the password structure. 

  • WRT54GX2 SRX200 thermal issue with internal Ethernet switch engine? Issue with DynDNS?

    The WRT54GX2 SRX200 had been working for 2 years. Last week it started to drop LAN/WLAN i.e. all Ethernet connection are up for about 20 seconds, then drop, comes back within 10 seconds then drop again after 20 seconds, etc. Shutting off the WRT54GX2 for a while will give 5 minutes of service, but the cycle will start again. Power supply is operating OK. I suspect a thermal problem on the Ethernet switch engine: it has been hot in San Jose and the wiring shelf reached 85*F. The other issue is that DynDNS flagged the WRT54GX2 SRX200 because it updates IP too often e.g. update on a timer ?
    I replaced the SRX200 with an older WRT54G V5 that works well in the same spot, and is 'verified' by DynDNS.

    Whats the current firmware installed on your Router?
    Try to download the latest firmware of your router from the linksys website and upload it on your router, once the firmware is uploaded then you need to reset your router and re-configure all the settings on it from scratch.

  • Issues with Fast User Switching, language pref, greyed out menu options

    I have only one user logged in to my Macbook. If i want to select the other user using Fast User Switching and clicking on the username in top right corner of screen, nothing happens. The other user at this time is still logged out.
    Incidentally, when i click on the airport symbol, the wireless networks are often greyed out and i can't change networks unless in go into network prefs.
    One more thing - i have english and spanish selected as languages in international preferences. I ca not switch back to english at all - by clicking on the flag in the menu bar or by going into sys prefs. When n battery power, power characteristics are also greyed out and unable to select a different profile.
    any help welcome.
    thanks

    It sounds like everything in your menu bar is florfed.
    Can you log in to the other user account from the login window instead of by fast user switching? If so, does that account have the same problems with the menu bar?

  • IPod/iTunes issue with Fast User Switching

    I have Fast User Switching enabled on my iMac Core 2 Duo running 10.4.8. My daughter usually leaves her iPod connected and it is causing problems when switching to another user. Other users get the message that the connected iPod is associated with another iTunes Music Library and constantly asks if it should be erased. While nothing has happened yet, there are 4 of us using this and I think it's only a ametter of time before somebody inadvertantly blows away her iPod.
    Is there any way to disable this this?

    Let me try to elicit a more helpful response...
    One of the problems I am encountering with an iPod connected and using fast user switching is that if the iPod is syncing with one user, and I switch to another user, the second user sometimes will try to take control of the iPod and sync with the second user's library.
    Is there a way to tell Mac User's 2 account to ignore User 1's iPod?

  • Blackberry curve password issue with alt

    Hi,
    can any one please resolve this issue.
    I had set my password in lowercase alphabets, I am not sure what went wrong that after my phone got locked I am able to enter only special character, I tried 4 time and after that I get an option of entering "blackberry", now I am stuck here.
    The concern is that the alt key is enabled, I see the alt icon on the right top corner of my screen, and now when I am trying to enter alphabets its not allowing me too...
    How do I go about this...???

    Are you saying the ALT symbol is stuck on in the upper corner?
    Leave your BlackBerry powered ON, remove the battery and replace to reboot.
    Upon reboot, is the ALT icon still there?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Lenovo ThinkVantage Tools PASSWORD ISSUES WITH OUTLOOK

    Hello!
    The ThinkVantage Password application is completely interfering with my Outlook work email address. Even the technicians with the Fortune 100 company that I work for say that ThinkVantage is "obtrusive & messy". My ThinkPad Edge is built for business yet it can't carry out elementary tasks...
    Since there seems to be no way for my Outlook and ThinkVantage Password to co-exist... I would just like to know how to disable ThinkVantage Tools, without having to uninstall the program.
    Thank you very much.
    jlfjlf

    start the client security solution you can disable it
    Thinkpad R61 7733-1GU
    Thinkpad X61T 7762-54U
    Thinkpad X60T 6363-4GU
    Did a member help you today? Thank them with a Kudo!
    If a post answers your question, please mark it as an "Accepted Solution"!
    Regards,
    GMAC

Maybe you are looking for