Password issues with my playbook

Hello,
i am a new member trying to get help for recent password issues with my playbook

Is this about exactly the same issue as you just posted about in this thread?
If so, please click on "Accept as Solution" next to my answer, and we can keep the discussion in that other thread (where you've posted more detail than you did here).
Peter Hansen -- (BB10 and dev-related blog posts at http://peterhansen.ca.)
Author of White Noise and Battery Guru for BB10 and for PlayBook | Get more from your battery!

Similar Messages

  • Issues with Blackberry Playbook not being recognised by Windows Explorer

    Hello, I'm new to the forums but am having the same problems as many others are, that being my Playbook not regonised by Windows Explorer. I have tried all of the solutions I have read like unistalling Desktop Manager, uninstalling then re-installing drives in Windows Device Manager. But one I recently stumbled across was uninstalling Blackberry Device Manager, how do I do this?
    Also the main problem appears to be that my Playbook will not sync anything with my computer. In Desktop Manager I can back-up my Playbook, but not sync anything. After re-installing a drive I now get the message of: 'Your Blackberry device is not compatible with this feature' whereas before I got the message of: 'You haven't configured any sync methods' but yet all of the sync options were greyed out. 
    How do I get Windows Explorer to recognise my Playbook as a drive and how can I sync in Desktop Manager? 
    Thanks in advance!
    Note: I'm using Windows 7 32-Bit

    Hello Tobster_,
    The following article should also help with detecting your BlackBerry® PlayBook™ tablet:
    Identifying and troubleshooting issues with the BlackBerry Desktop Software detecting a USB connected BlackBerry PlayBook - http://www.blackberry.com/btsc/KB27424
    We hope this helps.
    Thank you.
    -FB
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click "Accept as a Solution" for posts that have solved your issue(s)!

  • Password issue with ESW 520 switches

    I was wondering if anyone else has run into or noticed an issue with passwords using these switches.  I've set up 5 or 6 in the past couple of months and have confirmed it is an issue with both the 2.0.3 firmware and the latest 2.1.16 firmware.
    The issue is that you cannot use an & in a password.  That is to say, you can use it when setting your new credentials for the switch but once set, you cannot login using this password any longer.  I've tested these passwords over and over, making sure I didn't slip off the shift key by removing caps or substituting a 7 instead of the & symbol.  I have NOT tried any other special characters but I can confirm that numbers work just fine.

    Sounds like a bug Chris.
    On Jul 9, 2010, at 10:29 AM, "c.holloway"

  • Pop Account Password issues with Snow Leopard

    Since upgrading to Snow Loeopard my mail account will not accept my password, every time I connect with Mail it comes up with an error message stating that the pop server hasn't accepted my password - Help

    Same with me, the entire Modifier Keys settings pane for the Apple Keyboard does nothing, not just the Caps Lock setting. It works fine for the built-in MacBook Pro keyboard, but not for the external USB Apple keyboard. This worked perfectly fine on Leopard, but after upgrading to Snow Leopard it doesn't. How'd they break this??!
    Message was edited by: troyh3

  • Password Issues with Charter Mail Account

    Hi,
    I am setting up my new iPad Wi-Fi 4G with my email accounts for Charter. With this I have run into the following issue:
    -email accounts with only alpha or only numeric passwords work fine.
    -email accounts with a alpha/numeric passwords will not work. A user name or password incorrect error is received.
    All email accounts are valid and passwords validated. The support people at Charter have also confirmed this. Additionally, I have tried cutting and pasting account information in to make sure no typing errors occurred.
    The support people at apple have had me reset the iPad and then totally reloaded the software, of which neither resolved the issue.
    At this point an Apple senior advisor was contacted and I was told to contact Charter and see if they could change my passwords to all alpha or all numeric characters. This was the only action apple support could give. This however cannot be done due to new password guidelines at Charter.
    Has anyone else found this issue and resolved it?
    Regards,
    SSS

    I am not experiencing this problem on iPad2 .. my charter password has alpha & numeric characters in it.  HOWEVER, I did find that the charter username for HBOGo was my charter email & email password and NOT the user name & password I set up when I was setting up HBOGo the first time.  Maybe something like this is the problem, and not the password structure. 

  • Blackberry curve password issue with alt

    Hi,
    can any one please resolve this issue.
    I had set my password in lowercase alphabets, I am not sure what went wrong that after my phone got locked I am able to enter only special character, I tried 4 time and after that I get an option of entering "blackberry", now I am stuck here.
    The concern is that the alt key is enabled, I see the alt icon on the right top corner of my screen, and now when I am trying to enter alphabets its not allowing me too...
    How do I go about this...???

    Are you saying the ALT symbol is stuck on in the upper corner?
    Leave your BlackBerry powered ON, remove the battery and replace to reboot.
    Upon reboot, is the ALT icon still there?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Lenovo ThinkVantage Tools PASSWORD ISSUES WITH OUTLOOK

    Hello!
    The ThinkVantage Password application is completely interfering with my Outlook work email address. Even the technicians with the Fortune 100 company that I work for say that ThinkVantage is "obtrusive & messy". My ThinkPad Edge is built for business yet it can't carry out elementary tasks...
    Since there seems to be no way for my Outlook and ThinkVantage Password to co-exist... I would just like to know how to disable ThinkVantage Tools, without having to uninstall the program.
    Thank you very much.
    jlfjlf

    start the client security solution you can disable it
    Thinkpad R61 7733-1GU
    Thinkpad X61T 7762-54U
    Thinkpad X60T 6363-4GU
    Did a member help you today? Thank them with a Kudo!
    If a post answers your question, please mark it as an "Accepted Solution"!
    Regards,
    GMAC

  • Password issues with Mac Mail-help!

    I created a new email account through my internet provider (Comcast) and I can no longer access my email although it is showing up on webmail. The comcast person said I would probably have to change my password. I tried doing this on Mac Mail but there doesn't appear to be the usual place to type in new password and then confirm. I am not sure what password they are asking for. The mail account was set up so long ago that I have never used any password when checking my account. I also notice if I delete the password, the password dots are back when I open preferences up again. I don't understand this and Comcast will not help with Mac Mail questions. Any help would be greatly appreciated.

    You said you never used a password when checking you mail. You must have a password on the account, I don't see how you couldn't.
    When you go to www.comcast.net and go to the webmail client, you must enter your username and password in order to get your messages. It's this username & password that Apple Mail requires in order to access your email.
    If you want/need to change your password, you can do this at www.comcast.net from within the webmail client. When you are at your inbox on the webclient, on the left side of the screen there is a link for "Preferences". Clicking that will take you to another page and one of the options is "Change Your Password". That's where you would go to change your password for that specific email account.
    Good luck,
    Bronson

  • Getting SMPT password issues with a godaddy email

    For the longest time I have been unable to send out reply messages on a godaddy email account I've added onto my phone.  I can receive messages fine, but when trying to respond I get the following error message:
    "Cannot Send Mail No passord provided for SMPT:[email protected]@smtpout.secureserver.net
    Please go to Mail account settings and enter a password"
    I know for a fact the password is correct. 
    What can I try to fix this issue?
    Thanks.

    I found a 2nd place to put the password & it seems to be working now thanks.  It's been like this over a year.  Shame on me.
    Thanks.

  • Password Issues with WebCache

    Greetings,
    I changed the WebCache password and restarted WebCache.
    I cannot log back in with the new password, but can login with the old password. Once in, under the old password, I cannot do anything.
    If I try to change the Admin password again, it wants the new password in the Old Password textbox, so it must have taken the new password.
    Help...
    TIA

    I'm having a password problem, but of a different kind.
    The original password was forgotten and I'm trying find
    what file keeps the password.
    Is there a way to change the password from one of the
    config or xml files? I thought is was in the
    targets.xml file.

  • Password issues with WLC 2504

    I have a customer that has the following issues:
    a.            The password I set (for the monthly change both in October and January) stopped working, cause unknown. And then, when I tried to login,
    b.            The credentials to login to the Wireless Console were not working, we had to use the alternate credentials (originally setup by the installer), re-create the credentials, and set the password again (which stayed working just fine).
    Please let me know if anyone else has had this type of issue.

    Never had that issue.... I guess this might be a stupid question, but when the new credentials were entered, was the configurations saved?  IS there any type of audits that might be making some change on the WLC?
    Thanks,
    Scott
    Help out other by using the rating system and marking answered questions as "Answered"

  • Power on and hard disk password issue with rescue and recovery ?

    I have set a power on and hard disk password to prevent any unauthorized user to boot the computer and thats works fine but the problem is that it can be bypassed very easily by pressing the THINKVANTAGE blue button and going through the initial screen of the rescovery process.
    When you reach the main screen of the recovery process just press on "restart system" and on the next boot up you won't be asked for a password and it will boot into Windows. Is there any way to prevent a user to initiate a rescue and recovery to bypass the password or even better a patch that will trigger the password screen as soon as the blue THINKVANTAGE button is pressed ?

    I just recently discovered this problem as well.
    I'm hoping someone can help us with this.

  • Keychain "show password" issue with Airport

    I have 3 Keychain items for Airport Express. Two are in Login & if I select "show password" it asks for my Keychain password (which is also my login password), which I give & it shows me my password. No problem.
    The third Airport Keychain item is in System. Following the same procedure, I put in the same password & it rejects it.
    For both the Login & System Keychain items I get the same window asking me for my Keychain password, so I can't figure out why my password won't work for the Airport item in System. Any ideas would be appreciated.

    I don't know why the airport passwords end up in the System Keychain, or what's the password for the System Keychain, but probably you have the same problem I had: every time I wanted to connect to my Airport network I had to input the password again.
    In one ocassion, before entering the password, I clicked the "information" arrow and saw that indeed access to the system.keychain was being requested by some application called system.iUtilserver. I deleted the preference file "user">Library>Preferences>system.iUtils.prefs and now I do not have to input the password every time I connect to the airport. The password still reappears in the System Keychain, however. I also noticed that other accounts in my laptop didn't have this problem. One downside of this situation is that any user of your machine can access the airports covered by the password in the System Keychain, since it's a keychain available to all users.
    MacBookPro   Mac OS X (10.4.6)  
    MacBookPro   Mac OS X (10.4.6)  

  • Server issue with iCal/Google?

    I have been having this issue for a while: I keep getting an error message as soon as I open iCal about not being able to connect to a server because of a password issue with my synced (from Google calendar) calendars.
    Specifically, the pop up says: "The server did not recognize your user name or password for account ____", and then iCal immediately crashes.  This has been happening for months now, making iCal completely unuseable to me, but I need a calendar on my Mac!
    Help! Please?

    Have you granted the IIS user read & execute access to the %ORACLE_HOME% directory and subdirectories?
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?

    I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?

    What is the make & model of your home Wi-Fi router that you are attempting to connect your G5 iMac to? Which exact model of iMac do you have?
    What wireless security type is your router using: WEP, WPA, or WPA2? If you temporarily disable wireless security, can the iMac connect to it now?

Maybe you are looking for