Payment advice - different forms according to payment method

Hi,
Would someone know if it's possible to have different payment advice according to the payment method?
It seems that the payment advice is country dependent and has no link with the payment method.
If I try to add a form in "next form" and I suppress the "form for the advice payment", I do not succeed in printing the form anymore.
Does someone have any idea?

Hello Ronan,
Payment Program is normally configured for the combination of Payment Country and Payment Method.
Payment Advise Note is configured for the combination of Company Code and Payment Method.
So, you can have multiple Layouts for Paymeny Advices for different Payment Methods within the same Company Code.
Hope this answers your query.
With Regards
Vijay Gajavalli

Similar Messages

  • PMW - Payment Advice - Sapscript Form

    Hi.
    I need help understanding and seting up payment advice for ACH and wire transfer using PMW.
    Can someone tell me where and how I need to set up/program to create payment advice after creating either ACH or
    wire transfer?  If possible, I want to use sapscript form (modified version of F110_IN_AVIS form) and email the form to the vendors.
    I can create payment advice using F110 w/ variant for checks using classic program, but can't figure out how to do that using PMW.
    Thanks in advance for your help.
    John

    Hi,
    You need to assign the form for Payment Advice in the FBZP t-code under Form data for Payment methods in Company Code. For PMW you use PMW Workbench and the Std. SAP program it uses for Payment Advice is RFFOAVIS_FPAYM. You need to set the print variant for this program to generate the Payment Advice and also this Variant has to be used in F110 printout/ data medium.
    Let me know if you need any more help.
    Thanks,
    Ashok

  • Payment advice sent by e-mail, payment media file to be created before

    dear all
    We have implemented e-mail as a way of sending out the payment advices automatically to suppliers.
    Currently we execute the payment run, generate the payment media (which at the same time creates the payment advices and sends them out by e-mail) and then we import the file into our bank system, where payments have to be approved by a finance manager.
    We occasionally have the problem that the payments are not approved on the banking system on time - however the payment advices have already be sent by e-mail because the printout program does it at the same time as the payment file is created. Previously, because the payment notes were sent by post, we only sent them out after confirming that the payments had been actually executed in the banking system.
    What the finance department is asking for is whether the payment advices can be sent by e-mail only after the payments have been approved at the bank (and for this to happen the payment file has to be generated in a previous step) - Is there any way of achieving this?
    thank you

    Hi Rafael,
    For this you will have to do the following.
    Frist check with the ABAPer that whether there is any std. Program or function module in the system that can sends mail.
    1) With the help of ABAPer create a SAP Script form as per the requirements of Client as Payment Advice.
    2) Do the Configuration required for the Correspondence.
    3) You will have to develope a Z program or functionmodule to shoot mail as soon as the APP is completed. This you will have to do with the help of ABAper.
    4) Last but not the least you wil haveto maintain the email addresses of the vendors in their master record.
    Regards
    JS

  • Payment advice config for Manual outgoing payments

    Hi
    I am looking for the configuration steps for the payment advice in case of manual outgoing payments. We are not using APP.
    Thanks in advance.

    Dear
    1.Please try this t.code FBE1 after payment is made
    2.If not - configuration for correcpondence in OB77. OB78 .Create report variants.
    Then in F-53 , after process open items, generate the payment advise .
    Then in F.61, give the document nos and spool for the printout will be generated.
    3. You can payment & print directly trough F-58 also
    Regards
    shankar

  • How to seperate vendor payment advice form/customer payment advice form?

    Hi all,
    i was wondering if you could create a seperate payment advice form for
    vendors
    and
    customers.
    I used transaction code SE71 to visualize forms. Examples of payment forms for each company code can be found in customization "allocate forms to paying company code".
    The challenge that you will have to take is to seperate the payment advice for vendors and the payment advice for customers.
    Is that possible in SAP? Or is the payment advice for vendors automatically the same for customers?
    What i want to make is the following:
    - payment advice for vendors
    - payment advice for customers
    (So i can make changes in accounting clerk, addres, etc...)
    Thanks in advance.
    Pamela.

    Hello Pamela,
    Payment Advice is normally unique for each Payment Method/Company Code.
    If a special treatment is required to differentiate between Customers & Vendors (Example - Special information, layout difference, special details) in the Payment Advice, you can always handle it with in the same SAP Script Form that you configure for the Payment Method/Company Code.
    Either the field KOART (Account Type) in REGUP enables you to differentiate between Customers & Vendors. Please let me know if you need some examples.
    Hope this info answers your question. Please reward.
    With Regards
    Vijay Gajavalli

  • ACH method Payment advice -- Urgent

    HI all
    We have set configuration settings for ACH method for bank payments to our US client.  Client wants to send Payment advice to his vendors for payment made.
    I would like to know where I need to assign form and variant for payments advice so that I can also payment advice when I run F110.
    Thanks in advance.
    regads,
    S. Habib Pasha

    Hi Habib Pasha,
                             I am working on the same thing and need your help to be done. Can I get your contact number please.
    Regards,
    Paul
    773-780-1780

  • Payment advice printout changes

    Hi SAP Experts
    Please help me, i need to change the settings for payment advice print out under /nFBZP, Payment methods for country.
    Fields selection under payment advice are suppressed, i had to select the radio button(pymt adv after..lines) instead of Always Pyt adv.
    Please help,
    Advance Thanks

    Hello,
    It is not in Payment Method per Country.
    Correct is: Payment Methods in Company Code
    The radio button "Payment adv. after..... lines" is used for "Indicator that determines that a payment advice note is to be printed if more items are paid than there is space fo in the form"
    To activate this one, you need to select "restricted to" radio button with number of ROWS you are allowed in "Note to payee lines on the form" area. Then the "Payment adv. after.... lines" get activate and accordingly you can select.
    Hope this solves your problem.
    Regards,
    Ravi

  • Payment Advice customizing - F110

    Hello Together,
    We are developing a custom payment advice sapscript form for use with the standard (RFFO*) payment programs - through transaction F110. We have assigned the new form in FBZP (payment methods per company code - form for the payment medium), and are using the same variant for the payment program. However, when executing a payment run and printing the paymetn advice slip, a standard form is being printed (we suspect F110_DE_AVIS, although in the log there is no way of seeing which form is being used)
    Could you tell me if there are any additional customizing points where I should assign the new form for it to be printed?
    Thanks gurus,
    Stephen

    Hi Stephen,
    Please Check if you have done correctly the settings in this IMG path :
    SPRO > Financial Accounting (New) > Accounts Receivable and Accounts Payable > Business Transactions > Outgoing Payments > Automatic Outgoing Payments > Payment Media > Make Settings for Classic Payment Medium Programs
    Regards.

  • Payment Advice transaction F110.

    Hi All,
    I have copied and modified the form F110_IN_AVIS. From transaction F-43 I am creating a document and from transaction F110 running payment advice.The form is working fine in development but in quality it is not picking data from REGUH table.The company code is CMY and payment method is D and T .When again tested in development same problem is there,data is not getting picked up.There is no changes in configuration side. The payment advice is send as mail to the clerks email id in the vendor correspondance accounting.Now the mail is also not getting generated,but the data is getting entered in REGUH. The print program is RFFOEDI1.
    Please guide why the data is not getting picked up and how to resolve it.
    Thanks,
    Niketa

    Hi
    Once form is attached to Program and it worked once in Devlopment and not working in Quality means nothing wrong from the form point of view
    There should be some misunderstanding between F-43 and F110 transactions from functional point of view, so that the data is not getting transfered from F-43 to F110.
    So take the help of the functional consultant in this regard and solve it.
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • Payment advice through E mail or Fax

    Dear Gurus,
    My client wants to send the payment advice  generated by the automatic payment program (F110) to his vendors through Email and/or Fax
    ie at the end of the APP run, the payment advice should be sent through Fax or mail by the system.
    Pl let me know the config steps to make this possible
    Regards,
    Rishikesh

    Hello,
    Go to transaction code FIBF
    Settings ==> Process Modules ==> ... of an SAP Application
    Process: 00002040
    Ctr: Blank
    Appl.: FI-FI
    Function Module: SAMPLE_PROCESS_00002040
    You can copy the function module to "Z" function module and modify it accordingly. Then you can use your customized FM here.
    This triggers an email of payment advice, provided if you have maintained Email Address in the Vendor Master "Address" Tab and the Standard Communication Method is "INT - Email"
    You can see the email that is being triggered / delivered in transaction code SOST.
    To deliver the emails settings in SCOT are being completed by Basis consultants and the gateways must have been opened. Except production environment, normally the gateways are closed in development or QA environment in order to avoid sending wrong payment advices outside.
    Thanks,
    Ravi

  • Issue while clearing open items with a payment advice

    I have created a payment advice to clear open items on a customer. As part of testing, I have created 2 items in the payment advice. Both are short payments for the open items.
    In the first line item, I am short paying an open item by entering the reference number. (XBLNR) in AVIP-XBLNR.
    In the second line item, I am short paying an open item by entering the assignment number. ZUONR in AVIP-ZUONR.
    I am using F-28 for my clearing. I have noticed a very strange issue where in the program will place the residual amount in the residual amount column against the appropriate line item for the first item. Where as for the second item, it does recognize the open item and brings it in the clearing screen but does not put the residual amount in the residual amount column. Due to this, the new line item in the clearing document does not have a link to its original line item.
    This has started happening all of a sudden. I am unsure what might have caused this. Please let me know if you need additional information.
    Thanks

    Include - MF05BFO0
    FORM op_pruefen
    Context:
              WHEN 'K'.
               ENHANCEMENT-POINT mf05bfo0_02 SPOTS es_sapmf05b.
    Create an enhancement here and add this code
                   IF SY-TCODE = 'FB1K'.
                         T041A-AUGLV = 'AUSGZAHL'.
                   ENDIF.

  • Payment advice is not issued

    Hi expert,
    I have made a payment run to pay 2 vendors.
    I have selected a variant to create payment advices.
    When I do the print out, I get only 1 payment advice (for 1 of the vendors).
    What could be the reason why the payment advice for the other vendor is not created?
    Thank you.
    Kind regards,
    Linda

    Hi,
    I dont think this is for your scenario.
    As it clearly says that
    Indicator: Separate Payment Advice if Form is Full? 
    Indicator that determines that a payment advice note is to be printed if
    more items are paid than there is space for in the form.                                                                               
    this means
    As per this TICK,I understood that ,if more line items are ther for vendor to pay and which is not able to print in 1 form,then it is going to print in another seperate form(payment advise)
    Thnks jabeen

  • Split spool for payment advice

    Hi expert,
    I would like to send payment advices to vendors via FAX.
    I run the payment program, which triggers a background job and produces 1 spool with payment advices for all the selected vendors.
    The faxes cannot be sent. They are blocked because there are many different fax numbers in the spool.
    How can I create 1 spool per vendor?
    Do you have any experience?
    Thank you for your feedback.
    Kind regards,
    Linda

    Hello,
    As stated above, if you give 99 lines, it will create a separate payment advice after 99 lines.
    Restricted to : you can give the number of line limit.
    Payment advice note upwards of ... lines (Check this radio button)
    The number of lines on the payment medium where note to payee information for the business partner can be stored is restricted. In the event that more lines are required, a payment advice note is displayed on the payment medium and a separate payment advice note created.
    In that case, irrespective of number of vendors, a new payment advice gets generated after 99 lines. I mean if a vendor is having 120 line items, then for 99 one payment advice and 21 lines another payment advice gets generated. I have not tested this. You may please be required to test this.
    Regards,
    Ravi

  • Deleting payment advice

    Hi
    I have created a payment advice FBE1 by mistake through F110,  where is says generate payment advice  I have tried to delete using FBe6,  but it states that I can only delete this after 10 days.  Is there any other way to delete FBE1.  We do not use payment advice documents from FBE1.
    Please advise
    Help would be much appreciated.

    Hi
    Thanks for that,  it seems strange that no payment advice appeared in the spool and there was no job either.  If the payment advice is created for a payment run,  is it just a form that that is output to either get sent out or emailed etc?      If so then it looks like nothing has been output,  I also checked EDI just to make sure nothing happened there either.  I will give you final points if you confirm what I have said is correct.
    thanks

  • RFFOEDI1 how to generate a single spool request for payment advices

    Hello,
    We are using RFFOEDI1 to create payment idocs to send to the bank and also create payment advices.  We have multiple payment methods that we using during a single payment run.  When we run F110, the system creates the payment advices as a separate spool request for each payment method in the payment run.  The users would like to see all the payment advices in a single spool request, regardless of the payment method.  Does anyone know if SAP is capable of this?
    Thanks,
    Mark

    We are on ECC 6.0, patch level 14.
    Thanks,
    Mark

Maybe you are looking for