PDF form reset to blank after hitting send button

How can I make the PDF form reset back to the original after someone hits the "Send by email" button?

You can try to use the following on a 'click' event of the button.
It will reset the form after you email.
var myDoc = event.target;
myDoc.mailDoc(
false,
"[email protected]", "", "",
"Subject goes here.",
"Body message goes here."
xfa.host.resetData();

Similar Messages

After hitting send a draft is still saved in the draft folder.

When responding to an email it automatically saves into the draft folder which is great! However, after hitting send, the email stays in the draft folder. I do hear the "swoosh" sound so I know the email is sent, but I have to go in and delete the emails in the draft folder occassionally. I have received emails back from people even though the message is still in drafts so I know they are being received.

Is this a Gmail account? I've seen that behavior and the solution has been to turn off the feature of saving drafts to the server (see Mail - Preferences - Accounts - Mailbox Behaviors).
Matt

HT2500 what happens to draft messages after hitting send?

what happens to draft messages after hitting send?

Actually you can change it. Bring up the message and hit 'Message. > send again > and with the message ready to send you can rephrase it to your hearts content. Then resend.
Regards
Of course, you also end up with two messages
Message was edited by: seventy one

HT201269 I have lost all my contact details on my iphone 4s and I cant get them back even after hitting restore button.

I have lost all my contact details on my iphone 4s and I cant get them back even after hitting restore button.

This might be because that your game update or other software automatic update killed your contacts. You should make a frequency and regular backup for your iPhone so that all the data could be renewed to your backup data. Whenever you lost iPhone data, you have a choice to restore from iTunes. That is easy and free.
However, this is not the end of the world if you don't have any backup of your iPhone contacts, you can recover contacts with iPhone data recovery software, but that need you to pay for it. So making a backup is a good habit. Do you know how to use iPhone data recovery software to recover iPhone contacts without backup? If not, you can search in YouTube to get step-by-step guide to recover iPhone contacts from iPhone without backup. This is such an example: How to Recover iPhone Contacts - Step-by-step Guide.

Pdf forms (emails) not working after update

I recently have discovered that muse is not sending email pdf forms from the website. Is this a bug? I could not get it to work from preview or browser. I even uploaded a test and sure enough it doesn't send the form. The form sends fine from acrobat, so I know the mailto: settings are correct.
I checked acrobat settings and tried some work arounds. tested again and no luck.
As a final test, I updated an existing website that the forms currently work correctly. When I updated the site and previewed in browser mode, the forms could not be emailed any more. It's like the mailing URL link doesn't work because nothing was changed on the updated website - it was purely a test to confirm the problem.
Please help!
If anyone else is having this issue, please post here.
Ben
(I had this on a different post not realizing it should have gone here)

definately error 0013 and not 1013?
If 1013, I copied this from another thread, it worked a treat for me yesterday when I kept getting error 1013
More complete solution for those not knowing where to find the file:
On Mac:
* Open Finder
* Hold down COMMAND + SHIFT keys and press 'G'
* Enter "/private/etc/" in the field and press "Go"
* Find "hosts" file in the directory
* Drag the file to your desktop
* Open it in text editor
* Remove the line that has gs.apple.com entirely or put a # at the beginning of it to comment it out
* Save the file
* Drag it back to the /private/etc/ folder.
* You'd need to enter your username and password to authenticate the move
On Windows:
* Locate the hosts file in one of the following directories:
Windows 95/98/Me c:\windows\hosts
Windows NT/2000/XP Pro c:\winnt\system32\drivers\etc\hosts
Windows XP, Vista, 7 c:\windows\system32\drivers\etc\hosts
* Right click and click on "Open With..." and then click on "Notepad" on the list.
* Remove the line that has gs.apple.com completely and save the file.
This should work fine.
Message was edited by: ke11111y

Emailing a PDF form w/o an email address submit button

I have created a form; but my company does not want it to go to specific email address. So I took out the submit button. What they want is for people to be able to fill in the PDF form and send it to whomever they choose via email. BUT in reader, they cannot save the PDF. What do I need to do to get this to work correctly?
Thanks!
Diana

I had the same request.
All i did was leave the email address blank. On the "Design View", it will show an error but the employee will not see this. They can then just enter an email address.
Chomp

Hit Send Button - No Response, No Error message

After composing a message, I hit Send and the Mail app simply does not respond. It isn't frozen - no spinning ball or progress arrows - it just sits there. I have repaired/verified the disk and also repaired disk permissions. I have also created a new virgin user account with the same Mail settings and Mail WORKS FINE. So there appears to be a problem within this user account. I have also tried deleting the com.apple.mail.plist file - still no luck.
Any suggestions on how to proceed?

Can you compose the message normally in Mail? What is your Mail > Preferences > Composing > Check spelling setting? Set it to Never, restart Mail, and see whether that makes a difference. If it does, the problem is some Launch Services cache or preferences corruption that affects the ability of Mail to use the built-in spell checker.
The following article describes how to manually reset Launch Services — the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, take a look at this other article for general troubleshooting and cache-cleaning procedures:
Resolving Disk, Permission, and Cache Corruption
The most appropriate utility for this particular problem probably is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Go to Maintenance > Reset and check LaunchServices database.
4. Un-check any other pre-checked options.
5. Click the Execute button.
6. Restart the computer.

Created a PDF form on a PC, need save as button to work on Mac

I have created a lovely fillable PDF form for my boss as a client would like to be able to have a rather large interactive PDF document, and the deciding factor on if we get this work is whether i can get this to work so i'm hoping you lovely people will be able to help me out on this as i haven't been able to find ANY documentation on this thus far. I have created a 1 page PDF as a test subject, which has a few text boxes, some check boxes, radio buttons, a list box and a combo box which all work great. I have also added a "Save As" button to my document (so I have set the buttons actions to Execute a menu item > File > Save As...) which works just fine on my PC. But when this button is pressed on a Mac, nothing happens. (Also my PDF form didn't look quite right on the mac, some of the formatting was off, text boxes and combo boxes were a bit squashed, but i think this is a seperate issue altogether which im sure i can figure out by myself) Now i think i know why this is happening, i believe it's because the button is set to go to "File > Save As" and im guessing the command to save on a Mac is different? or points to a different file location? (I'm not very clued up about Mac's...)
So my question is this, is there any way to have a Save As button in my PDF document that will allow both PC and Mac users to save the fillable PDF form? (Oh by the way I have made sure that once i created my form I extended the features for reader to make sure that the form was savable once filled in.)
Also, i know this is a completely seperate question, but if anyone had any answers on this it would be GREAT, When creating a text field in the form and coming out of form editing, the text field is shown as a horrible pale blue colour, which i know is there so that the user can tell that there is a form field there, but this pale blue really does NOT go with the aesthetic of the document. After digging around for a bit, i found out that the pale blue is a highlight colour which can be set in your preferences in reader or acrobat. Is there anyway that i could change this highlight colour for the document so that whomever opens the document on their PC / Mac doesn't have to see that horrible pale blue? Without them manually having to change their preferences in reader?
Thanks in advance for all of your help,
Danny.

Double-check that the file is opened in Adobe Reader on the Mac and not in
Preview, which is known to have various problems with it comes to forms.
Regarding the highlight color: You can't either change it, or disable it
completely.
app.runtimeHighlight is a boolean that determines whether the form fields
are highlighted, and app.runtimeHighlightColor is a color object that
determines which color is used. Notice that these are system-wide
preferences, so if you change them it will affect other documents as well.

Dynamically copy a PDF form to a specific repository via a button

Hi,
Sorry in advance if this is a dumb issue for which there is an obvious solution, but since I'm not a developer I couldn't tell and my searches around the web haven't allowed me to solve this out.
As the web designer here, I've been asked to create a dynamic PDF that would include a form and a button that would export a copy of the completed form when clicked. The copy would need to be placed into a specific repository on a local server. I found out that is was possible to create a dynamic button in InDesign when creating a dynamic PDF form, but it seems that the native actions available for the buttons are quite simple, like switching to a page within the document or sending an email. I would need, with the help of my developer, collegue, to customise an action for a button so that it would act like mentionned here above. I thought it might involve some scripting within InDesign to customise the action. Am I right and what would be the best way to achieve this?
Thanks!

When the form I designed for some nurses is used, the information has to be copied and then pasted into a text editor program for a patient file. When I do a select all and copy, it only copies the fields, not the information entered by the nurses. Is there a way to allow all of the fields and text entered to be copied and then pasted in the editor program?

3 GS freezes to white screen occasionally after hitting home button. Has anyone ever experienced this?

Has anyone ever experienced a white screen that freezes then turns black after hitting the home button?

I have had intermittent white screens for some time (as in three years). It happens when the phone "wakes up". I hae lost calls that I could not answer because the screen was white. It has come up white when I hit the home screen. Not always, but with random frequency. All I have to do it hit the power button (I do not have to power off, just hit the button) and reopen the phone and it is gone. I know the phone is functioning under this screen, I just cannot do anything.
My first 3GS had the problem so severly I called Apple. After two and a half hours of resets of various kinds, they decided the phone was bad and sent my a replacement. It was better, but it still has the issue. I have gotteb used to it and am waiting until I can get an upgrade to the phone in the hopes it takes care of it. In the meantime, I occasionally doa search here and un the intertubes to see if someone else has the issue and a solution.
My suspicion has been that some app I downloaded causes it, but I have deleted apps and cannot get rid of the issue.

Restrict Navigation after hitting Apply Button

Hello All,
I want to restrict the user not to go to next page after Apply button is hit .
Issue
One of the values get populated only after the Apply Button is hit and based on the value, i need to restrict the user to provide correct details.
I have extended the CO and trying to achieve this, please let me know.
Thanks
Rakesh
Edited by: Rakesh S on Nov 25, 2009 11:43 AM

How are you navigating to next page? SetforwardURL or forwardImmediately?
Try to do setForwardURLToCurrentPage() at the end of the processFormRequest()
--Prasanna

Emails send before I hit send button

Since downloading Mountain Lion, sometimes my emails get sent before I have a chance to finish them and I have not hit the send button. Right in the middle of a sentence, zooom, the email is gone. What's with that?
Rose

Could you have accidentally hit the keyboard shortcut for sending a message? In previous versions it was Cmd-E, if I remember correctly - I did accidentally send some messages, because I pressed this when I meant Alt-E (for entering and accented character).
In Mountain Lion, this keyboard shortcut is now Cmd-Shift-D, which may be less likely to be used accidentally, but still possible.

Fillable Reader form reverts to blank after saving

My wife received this form when applying for a state job in Oklahoma - http://www.ok.gov/health2/documents/opm-4.pdf. She completed the form then saved it. When we reopen it the data appears for an instant then disappears. You can also see the old data by clicking File > Revert but the data still shows up for just an instant and it goes right back to a blank form.
For reference I am using Reader 11.03, Windows 7. I have also tried this in the Nitro Reader 3 and get the same result. I am not opening the document in a browser.
I contact the person that sent this form to us and she reports that she hears the complaint frequently.
Any idea how I stop the form from hiding the data upon reopening?

I downloaded the form from your link, and the same thing happened to me. Stranger, even, the original form was 816KB; after saving it with data, it was only 104KB.
Something is definitely wrong with that form, but I couldn't tell you what.
I would just send them the filled-in form; maybe the people who created it can read the data in it?

Brand-spanking new T61's screen is blank after hitting power on button.

Good evening, ladies and gentlemen. I've been at this for over 6 hours. I've tried everything in the lame troubleshooting manual, and almost everything from the Lenova's website. Here's the deal: I hit the power button... blank screen. Battery, A/C, (Z) all on. The fan whirrs to life, the HD makes some subtle sounds. I look up--AH! Black screen, nothing.. and it's quiet out there, too quiet (No beeps, just the constant whirring of that fan, mocking me!) I've done all possible combinations of re/dis/connecting the A/C cord and battery. I've reseated the HD and DIMM. I pounded several FN key combinations for a good amount of time, and nothing happened. Just to see if I could make it beep, I held down several keys until I might hear that "beep...beep...beep...", but Oh No, this T61 is giving me the cold shoulder. But, hey! The DVD drive works! Oh baby, I'm in business! It seems to be able to read CDs. Maybe if I put in a movie, I can sit back and pretend I'm watching it; but that's only fun for so long.
Now, for the questions:
1) I go to this link: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-45707&selectarea=SUPPORT&tempsel... . And check out all the various things for it. It says: 1) Reseat DIMM. Derrr, ok, done! Power on, nothing. 2) System board. Hmmm, system board? What about it? Would they like me to drop kick the system board? It would be enjoyable, but maybe a little unproductive. What's it mean by "system board"? What do I do with the system board (1)?
2) Also, how do I check to see if the LCD is properly connected? (How do I reseat the LCD connectors (2)?)
3) The power is fine, AC cord and battery are fine. It's not on standby mode, not overheating, the LCD cannot be illuminated by a flashlight. How do I test the laptop with an external LCD (3)? I plugged in my monitor to the laptop's side port, but nothing happened when I powered the laptop on, so what am I doing wrong? [Option 3 might be my best bet to fix this.]
4) I can't see much, so I'm not sure if there's a problem with the BIOS. If there is, how do I go about fixing that?
Additional info:
Although I would love to, but I can't test this laptop with different hardware since I don't happen to have any random T61 laptop parts lying around. I would love love love to get an expert to do this, but I love to learn and love to save money. Warranty? Ship it in? Nope, I'm gonna be 3000 miles from the USA soon.
Questions? Comments? Criticisms?
-Thanks for reading

As a last ditch effort try removing the battery and power supply, press the power button 50 times holding for 30 seconds on the last one, plug in power supply and try to start up without the battery.
T60 2623-D7U, 3 GB Ram. Dual boot XP and Linux Mint.
T400 2765-T7U Windows 7
Registered Linux User #160145
FYI: I am not employed by Lenovo

Can not modify the layout for my Default Display Form, inside an issue tracking list. the form will be blank after adding the cusotm styles

I am working on an Issue Tracking list inside SharePoint 2013. but when a user clicks on an item , the description field will occupy only a small area of the page , while most of the page will be blank as follow:-
so using F12 Developer Tools on IE i detect the marckup for the Description field as follow:-
where it is mentioned that it have a Width=350, so i add a Script Editor web part to the displayform and i specify the following to expand the field from 350 to 1000:-
<style>
#SPFieldNote
{width: 1000;
<style>
but the result is that the display form will display nothing when clicking on an item as follow:-
Of course if i remove the ScriptEditor web part the form will be shown again..
so can anyone advice from where i can force the default display item view to occupy the whole page size ? Thanks

Hi John,
Since width is mentioned in 'td' itself, so using styles we can't overwrite the width. For that you can implement javascript or jQuery code to set the width on td element.
$('#SPFieldNote').width('1000px');
Regards,
Brij K

PDF form reset to blank after hitting send button

Similar Messages

Maybe you are looking for