Perfroms used in a program

hi all,
my requirement is to find out all the external performs(form will be in another program)in a given program,i want to know wether there are any function modules which does this.i should not be using scan statement for this purpose.

Hi,
Just chek out if this program helps you:
RPR_ABAP_SOURCE_SCAN.
you can do a submit and work your logic here:
submit RPR_ABAP_SOURCE_SCAN
with REPNAME in progs
with SSTRING in table_list...
Regards,
Anjali
Note: pls reward the helpful replies.

Similar Messages

Using iPad mail program I have a draft of an email. I attempted to "cancel" and "delete draft" but it is still on my screen even after shutting down and restarting. How do I exit so that I can use other mail functions?

Using iPad mail program I have a draft of an email. I have attempted to "cancel" this and "delete draft" but the email stays on my screen. How can I exit this so that I can use other email functions?

Try closing the Mail app completely and see if it works properly when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I have a fully paid subscription to CC and use of installed programs but I can no longer sign in to CC. It repeatedly says "You've been signed out". I have the need to install another program but I can't sign in.

I have a fully paid subscription to CC and use of installed programs but I can no longer sign in to CC. It repeatedly says "You've been signed out". I have the need to install another program but I can't sign in.

Sign Out When Sign In http://forums.adobe.com/thread/1450581?tstart=0 may help
-and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html

If i purchase a movie from iTunes on my Windows 7 PC is there a way I can download it and watch it offline without using the iTunes program?

I have been trying to figure out the answer to this all day I want to purchase The Interview I know you can download but I want to know if you can watch it offline without using the iTunes program like will i get the file to this movie i purchased?

Thank you i been looking for a answer to this all day but I couldn't find anything on it! Now I know I will find a file with it! thanks!

I am trying to use an education program that needs Java applets to install and use and it will not use Safari. When I download IE from the web it will not install. How can I get a browser that will work on my MacAir for travel use of this program?

I am trying to use and education program that needs Java applets and it will not run on Safari. IE will not install from the web. How do I get a browser that will work to install so I can use this program when I travel.

Try using FireFox. IE will only run on a Mac if you run Windows on the Mac.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows 7 or Windows 8. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusion and Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. A more recent comparison of Parallels, VM Fusion, and Virtual Box is found at Virtualization Benchmarks- Parallels 10 vs. Fusion 7 vs. VirtualBox. Boot Camp is only available with Leopard and later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

OneNote recordings "We're sorry, we can't open the file because it is in use by another program."

Constantly, OneNote breaks and screws up my recordings that are synced with my lectures. It is such a fragile process and very frustrating. As soon as I'm done recording, I press stop. When I test the recording, it says, "We're sorry, we can't open
the file because it is in use by another program." I just recorded and then stopped it. If i close and reopen OneNote, it says, "oneNote is cleaning up from the last time it was open." And the recording still says it's in use by another program.
I've even restarted the laptop and it still won't open. The only way i could salvage the file is if I copy and paste it into another folder, and then it will open through windows media player, but all the live syncing with my notes are gone. Where are these
files stored? If I could save the sound and find the file/format that holds the syncing data again, I could work around this. They are no where to be found on my computer. Other forums give locations, but my folders are empty. Some other recordings work and
sync nicely, but I have still lost many recordings to this error. However, if I play a file and then close it without stopping playback, that file, too, will now be unusable. It will be stuck as "We're sorry, we can't open..." no matter what i do
and again i have to copy/paste it into a new folder and then move it back. I had the same problem on my last laptop. I record in Windows Media Audio 10 Professional at 192 kbs, 48 kHz, and stereo CBR. I need the high quality because the lecturer is too quiet.
It seems to happen when I record long lectures, 45 min+. Shorter recordings tend to work fine.
Please help, this would make note taking so much easier.

A bit of a confusion on my part;
Now we have created these REPORTS using Basic Crystal Report 10.5, which comes bundled with Visual Studio 2008 and .Net Framework 3.0. Now on our machines, we have never experienced any issues.
Going by the above, you should have references to CR assemblies of version 10.5.3700 only. No other references.
Now, looking at this paragraph:
BUT on the DEV server (web server) which has .net Framework 3.0 and in its GAC its has CRYSTAL DLLs version 11.5 (required to create an Object of ReportClass and its related functions) ; sometimes we get the following error while exporting crystal report to pdf:
I wonder what runtime was deployed to the server. E.g.; if you are using CR 10.5, your assemblies will be 10.5.3700 and you should be deploying the following runtime (depending on 32 bit / 64 bit, etc.):
CRRedist2008_ia64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255262008E/CRRedist2008_ia64.zip
CRRedist2008_x64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255272008E/CRRedist2008_x64.zip
CRRedist2008_x86.msi
https://smpdl.sap-ag.de/~sapidp/012002523100009351342008E/CRBasicVS2008_redist_x86.zip
One way to check on what is actually loading is to use the [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility.
- Ludek

Report to check authorization object used in customized programs

Hi Guys,
An auditor came and he raised a question to us, he asked whether all of our customized transactions and programs are maintained with authorization checks? The question is how can we check what authorization objects are used for our customized programs and transaction codes? The developer did not maintain the objects used for that program in SU24 table. Is there a program or a report to show us all the authorization object used for a customised program or transaction? Example : T-code MIGO we can check in SU24 table for all the authorization object used. How do we check for customized tcodes? Please advise. Thanks!
Edited by: Jarod Tan on Nov 25, 2010 9:42 AM

Note that some programs are built in such a way that no (visible) auth check is necessary, or even desired at all.
To determine the necessity of an auth check, you should check that starting it has an entry point (tcode, rfc, service) which is appropriately restricted. The rest (whether and where and how a further check is evaluated) is entirely dependent to what the program actually does.
Well designed applications generally have centralized functions and methods, and the checks are in there or a "base check" they use.
Others again use the same in UI programming to determine the visibility of functions, to make the application more intuitive for the user. This on it's own is however not a sufficient auth check to rely on.
Code review is an art form!
Cheers,
Julius

Populating the Addressee field using Customer Interface program

Hello All,
Can any body tell me how to populate the "Addressee" column in the HZ_Party_Sites table using Customer Interface Program. Which field should be populated in RA_Customers_Interface_All table inorder to populate the "Addressee" field.
Thank you,
Vijay

You can post this thread in this
Customers as well.
Thanks
GM

Use abap report program to print bar code instead of smartforms

Do anyone know how to use abap report program to print bar code?

Hi Celina,
http://searchsap.techtarget.com/tip/1,289483,sid21_gci839063,00.html
I hope this will help, also it depends on the barcode type like ARTNR-code 128...
Regards,
Sudhi

I have 2 iPods/want to use 1 iTunes program

Can I use one iTunes program (music library) for both of my iPods?

These links should also help:
Natalie Beresford, "Multiple iPods/iTunes Installations", 04:04am Nov 26, 2004
How to use multiple iPods with one computer
How to share music between different accounts on a single computer

How to use another java program to stop this running prpgram???

Dear Sir:
I have following code and I run it success,
import java.util.*;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.io.*;
public class CertainAndRepeatTime{
public static void main(String[] args) throws IOException{
    int delay = 1;
    Timer timer = new Timer();
    ActionListener actionListener = new ActionListener() {
        public void actionPerformed(ActionEvent actionEvent) {
          System.out.println("Hello World Timer");
    System.out.println("What do you want (Certain time or Repeat time)?");
    System.out.print("Please enter \'C\' or \'R\' for that: ");
    BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
    String ans = in.readLine();
    System.out.print("Please enter ans=" + ans + " IsTrue= " + (ans.equals("R") || ans.equals("r")) +"\n");
    if (ans.equals("C") || ans.equals("c")){
      //System.out.println("This line is printed only once start...");
      timer.schedule(new TimerTask(){
        public void run(){
          System.out.println("This line is printed only once.");
      },delay,1);
    else if(ans.equals("r") || ans.equals("R")){
        timer.scheduleAtFixedRate(new TimerTask(){
          public void run(){
            System.out.println("This line is printed repeatedly.");
        },delay, 1000);
      while(true){
           //System.out.println("Charles print This line is printed repeatedly.");
      } //This will make your main thread hang.
    else{
      System.out.println("Invalid Entry.");
      System.exit(0);
    System.exit(0);
}But I hope to use another java program to stop it when it is running instead of pressing CRTL + C to stop it.
How to do it??
Any example??
Thanks a lot!!

Sorry, I think i did not express cearly. It is my fault.
I re-write my requirements again:
I have
Class AAA1.java,
Class AAA2.java,
Class AAA3.java,
Class AAA20.java...
etc
they all look like the program I posted first time,, once executed, they will run for ever, and they will be stopped until I press CRTL + C;
Now I hope to use another java class StopProgram.java to stop them 1 by 1 or at once instead of pressing CRTL + C;
In this case, how to code this StopProgram.java ??
Thanks

This is my first use of this program. How do I remove a page break? How do line up my drop down box along side the text box on the left of it? The drop down is for a multiple choice answer for the question to the left.

This is my first use of this program. How do I remove a page break? How do line up my drop down box along side the text box on the left of it? The drop down is for a multiple choice answer for the question to the left of each drop down.

See McAfee support to find out how to disable that McAfee feature - that isn't part of the normal Firefox installation.

I have an ipod that I have been using for iTunes, when I connect now to sync, and hit the eject ipod, I get a warning it can't eject due to applications being used in another program. I am having trouble disconnecting. Help!

I am having a problem with the new iTunes store. I can connect my ipod, and it will show that it is syncing. Once the sync is complete on iTunes, my ipod still shows that it is connected, do not eject. I have not had a problem with this until the new verision of iTunes. When I go to eject my ipod, it tells me that it can't eject due to application being used in another program. I did receive an ipad 2 for Christmas, that I also sync with iTunes, but only the ipad shows up in my devices on the site, what happened to my ipod device and how to add it back to devices? Help is greatly appreciated. Thanks.

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

I have captured a VHS movie from a VCR to my Mac. I used a Roxie program and it said "capture to IMovie". I said yes. It shows in my events with a green asterisks but it is not showing up in iMovie, It is in my doc but won't go into iMovie. Why?

I used a Roxie program to bring in my video from VHS. I know it's in my computer and when I right click in the event in IMovie and click "capture movie, a screen comes up showing it but it won't capture it and bring it into IMovie. What am I doing wrong

Firefox can find plugins in several locations, but Firefox 21 changed the location of the "shared" plugin folder so older installers like the Microsoft Windows Media Plugin no longer drop the DLL file in the correct location.
There apparently are two ways to address this:
(1) Change a Firefox preference so that Firefox checks the old location. Here's how:
(i) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(ii) In the filter box, type or paste '''plugins''' and pause while the list is filtered
(iii) Double-click '''plugins.load_appdir_plugins''' to switch its value from false to true.
This will take effect after you restart Firefox.
(2) Copy the plugins folder to the new location. Here's how on Win 7 64-bit:
Open a Windows Explorer window to:
C:\Program Files (x86)\Mozilla Firefox
Right-click and copy the '''Plugins''' folder
Double-click the '''browser''' folder to open it
Right-click and paste
Right-click the new copy of '''Plugins''' and rename it to '''plugins'''
After restarting Firefox, the plugins in that folder should now be available.
''Edit: I suggest just doing #1.''

How can I run a Buffered Contour repeatitively using on-board programming?

I have a 400 point countour move that I would like to run for 100,000 cycles. How can I use the buffer over and over again using on-board programming?

Jed,
Thank you for your comments. They did not however answer the question. I am asking about buffered contour moves. Most of the Onboard programming examples and tutorials deal with repeating of linear or circular moves. I have been using the onboard programming for some time, and have set up and run may Onboard DO WHILE Loop programs with good result. I have however been having some problems with the onboard progams running reliably for more than 1000+ cycles. I have spoken with Mr. Austin about this, but we have not been able to resolve this problem.
The buffered contouring options are of great value to me, as I would eventually like to follow some pretty complex pathways that require changes in velocity as well. I can sucessfully complete one cycle o
f buffered contouring, but that is all. I can repeat this cycle, but only by buffering two or more iterations of these points. Each time you write to the buffer, it is memory intensive, and the HELP files urge you to not write to buffers too much while motion is in progress. I have worked with the vi that lets you progressively write a large number of points to a small buffer and a while loop. This works great for a few cycles, but I would like to preform 100,000 cycles. I am having trouble getting the same type of vs to work for this many points.
I would like to know if it is possible to have a buffer that you can read from recursively, without it being erased after it is read.
If not, how would it be best to approach this problem?
Thanks,
John

Perfroms used in a program

Similar Messages

Maybe you are looking for