Photoshop CS3 Extended - Fading 1 color into another color

Photoshop CS3 Extended running on Windows XP Professional:
Using a new default size blank page - I want to start at the top with one color - gradually lighten toward the middle then gradually fade into another color (like from violet to light blue).
Can anyone tell me how to do this?
Thank you,
Carol

Check out the
Gradient Tool
in Help. Once you've got that check out
Layer Masks
in Help.
That should get you going.

Similar Messages

Error "Licensing for this product has stopped working" when starting Adobe Photoshop CS3 Extended- XP Pro AMD; 2GB RAM

I have exhausted all known options thus far.
I started the Flexnet Licensing Service and restarted the system but the message continues to come up when lanching PS CS3 extended
After restarting computer the Flexnet Licensing Service stops again and goes into Manual mode. This also happens after a few minutes without restarting.
I also downloaded the Flexnet Licensing Recovery Kit from Adobe Support but the file stops after saying "please wait for a few moments.. ?"
I changed the setting as discribed for the Flexnt folder but the message continues to come up when PS Extended CS3 is launced.
http://kb2.adobe.com/cps/401/kb401528.html
What else is there to do. Please help me as what I can do so I can continue to use Photoshop CS3 Extended.
Thank you

I downloaded the clean Script file and followed the instructions from what the Clean Script read Me file described. The first step said to deactivate. Although I was not able to deactivate because of my original message, I followed the remaining steps.
After using the Clean Script and uninstalling Photoshop CS3 Extended and re-installing it I re-booted my computer. I also deleted the CS3 Application data files.
When I installed PS CS3 Extended the installer does not ask for the serial number on all attemps. I bought a registered copy of PS CS3 Extended. Is there another way to approch this licensing error.
Thanks.

Photoshop CS3 Extended won't recognize QuickTime installation

Hi,
using Photoshop CS3 Extended, I tried opening an animated GIF today without success. After some forum searching I found I had to import it as video into layers.
When I tried that I got this message:
"Could not complete the video frames to layers command because QuickTime version 7.1 or later is required."
I have QuickTime installed, the newest version (checked for updates and found none), and it works normally. This computer is just about 2 months old, so it's not an out-of-date installation of QuickTime, either.
I am running Windows XP Pro.
How does Photoshop determine whether QuickTime is installed or not?
Any other ideas?
I'd rather avoid re-installing programs (especially QuickTime) if there's an easier fix for this.
Thanks!

Richard.
There was a problem with QT 7.4 and the Digital rights Management segment that conflicted with After Effects and Premier. There was an almost immediate update from Apple to 7.4.1 (6?) which fixed this problem, there may infact have been another update since then although from memory this was just an itunes update.
I'd update to the latest version which will more than likely fix the problems. If as you said you have the latest version then try uninstalling Quicktime and reinstalling it rather than using the apple updater.
BRETT

Does Photoshop CS3 Extended support Thai fonts?

I am translating some short text in Photoshop to several Asian languages. I noticed just with the Thai language, that I get a series of X's with boxes instead of Thai characters. The characters are fine in other applications, including Flash CS3. Other than taking a screenshot in another app and pasting into Photoshop, does anyone know of a workaround? Should I install a particular Thai font that is supported by Photoshop? I am running Photoshop CS3 Extended on Windows XP. Thanks for any help.

So in my search, the only thing I found was a utility downloadable at CNET http://download.cnet.com/ASK-Square-Free-Version/3000-2316_4-10855142.html
"ASK Square works efficiently with well-known graphic software such as Adobe Photoshop 7, CS, CS2, CS3 and CS4. It enables users to use of all Thai characters. Users can type all Thai characters, even troublesome characters like. This software also corrects excessively high vowels while typing or after typing just by only one click. Further more it can transform illegible font to normal font that happens when changes a texts font, to a readable normal font. If users copy texts from external application such as word processing or spreadsheet software and paste those texts into their graphic software, ASK Square software can correct the wrong-encoded texts automatically.
ASK Square is flexible. It enable user to type Thai non-unicode font on Adobe Photoshop. Version 1.5.0.10 supports Adobe Photoshop CS4."
Funny thing is you can tell their sales pitch was loosely translated. I gave it a try anyway. The instruction PDF was in Thai, their website was in Thai. But I felt brave anyway, seeing as I googled this application title and didn't see anything negative written about it. Then I go to the application icon in the system tray. As you can see from my screenshot, it ain't exactly user-friendly.
Bottom line... it didn't work. Anyone out there have a solution? I've searched everywhere... Am I the only one with this problem?

Bridge not functioning in PhotoShop CS3 Extended

I deactivated Photoshop CS3 on a computer I was no longer using and installed it (CS3) another computer. I activiated CS3 on the new computer. However, when trying to use Bridge, I get a message that says that Adobe no longer supports Bridge Home and Bridge does not function on the new computer. Is there anything I can do to get Bridge to function as part of CS3 Extended?

Thanks, that worked.
In a message dated 12/28/2011 10:13:56 P.M. Eastern Standard Time,
[email protected] writes:
Re: Bridge not functioning in PhotoShop CS3 Extended
created by Curt Y (http://forums.adobe.com/people/Curt+Y) in Bridge
Windows - View the full discussion
(http://forums.adobe.com/message/4107610#4107610)

Adobe Photoshop CS3 Extended on Windows XP Professional

Topic: Selecting
I have been using Photoshop Elements 4 until I just purchased Photoshop CS3 Extended. In Photoshop Elements 4 there is a selection brush, enabling you to make pixel by pixel selection (if desired). There seems to be NO counterpart in CS3 - - which seems impossible for so powerful a program. In that most of my work involves selecting very precise points of 1 or 2 pixels, how can this be done?
Please help.
Thank you

Dave Milbut:
Thanks so much for responding . . but, unfortunately does NOT work again! I did exactly as you suggested in that I made a selection fir so that I could get a quick mask. When I double-clicked on quick mask in the tools pallet, NO options appear that say "Paint on selections" nor "paint on mask". The options is get are "Color indicates Mask Area or Selected area" and you have to chose one. The only thing you are actually choosing is whether you want the color to appear on the mask you chose or inversely to appear on the remainder of the object. The "black" brush remains the same and does not change.
If I do not learn how to make minute selections (so that I will be able to act on only tiny tiny areas) I will not be able to use this program after spending a million dollars for it. It looks like Adobe could make something so fundamental (available in Elements) available here.
Could you help me further . . . PLEASE !
Thank you.

Adobe Photoshop CS3 Extended freezes on startup under Windows 7 Ultimate 64-bit - No splash screen

I installed my licensed copy of Adobe Photoshop CS3 Extended today as part of my install a bunch of software after a reinstall of Windows (due to viruses). I did a completely fresh install of Windows 7 Ultimate 64-bit. I've used Photoshop CS3 Extended for quite a while now so I know what to expect on startup but it was previously installed under Windows XP Professional (32-bit). Figured I would give Windows 7 a chance this time around.
Google searches aren't turning up anything. When I attempt to start the application, I get a window with the title "Adobe Photoshop CS3" (no "Extended" - I seem to recall the title changes later) and the toolbar appears. However, no splash screen appears and no Product Activation wizard appears - the application simply freezes on an empty frame and a toolbar. I've tried running Photoshop as Administrator (right-click, "Run As Administrator"), but nothing changed there. I tried uninstalling and reinstalling. I tried upgrading to CS3 10.0.1. Nothing works. The application simply freezes before it gets anywhere.
I tried calling Adobe Support since this technically falls under installation issues but their phone support systems are down today. Go figure.
Edit: I hooked into Photoshop with the Visual Studio debugger and every single thread is executing some variation of WaitForSingleObject() or WaitForMultipleObjects(). The main thread is "executing" somewhere in AdobeLM_libFNP.dll (at address 09619d81 - if I had debugging symbols for CS3, I could provide a function). There are nine threads "running" at the point the freeze occurs - but all of them are technically suspended due to the functions they are executing - and one thread is in a suspended state.

Log Name:      Application
Source:        Application Hang
Date:          7/17/2010 6:16:25 PM
Event ID:      1002
Task Category: (101)
Level:         Error
Keywords:      Classic
User:          N/A
Description:
The program Photoshop.exe version 10.0.1.0 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: d0c
Start Time: 01cb2616be79e36f
Termination Time: 2
Application Path: C:\Program Files (x86)\Adobe\Adobe Photoshop CS3\Photoshop.exe
Report Id: 06f5fbff-920a-11df-9d69-001fd023417e
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Hang" />
    <EventID Qualifiers="0">1002</EventID>
    <Level>2</Level>
    <Task>101</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2010-07-18T01:16:25.000000000Z" />
    <EventRecordID>1615</EventRecordID>
    <Channel>Application</Channel>
    <Security />
</System>
<EventData>
    <Data>Photoshop.exe</Data>
    <Data>10.0.1.0</Data>
    <Data>d0c</Data>
    <Data>01cb2616be79e36f</Data>
    <Data>2</Data>
    <Data>C:\Program Files (x86)\Adobe\Adobe Photoshop CS3\Photoshop.exe</Data>
    <Data>06f5fbff-920a-11df-9d69-001fd023417e</Data>
    <Binary>430072006F00730073002D0074006800720065006100640000000000</Binary>
</EventData>
</Event>
And, according to the Event Viewer, the "Binary" data translates to a zero-terminated Unicode string of "Cross-thread".
My Visual Studio analysis was far more informative. All threads are hung inside of WaitForSingleObject() and WaitForMultipleObjects() calls and the DLL in question appears to be FlexNet-related. I did forget to mention that I also even manually started the FlexNet service in case, for some strange reason, Photoshop was waiting for it to start. That also did not work.
(And there is nothing in the Action Center control panel either despite the message saying there might be more information there.)
Edit: The timestamp above might be a little odd-looking. I didn't originally see anything in Event Viewer until I clicked the first button to send an Error Report. Mostly I just skipped that part of killing a process.

Photoshop CS3 Extended error on load

Photoshop CS3 Extended
Windows 7 with all updates current
Error message on load 'could not initialize Photoshop because of a program error'
I'm running:
intel core i5
16 GB RAM
148 GB free on drive C
698 GB free on Drive D
465 GB free on drive E
465 GB free on drive F
2 DVD-R drives
All updates to Photoshop were installed last time I ran it with no problems.
No new hardware has been installed since.
Installed Classic Shell since last use, so I uninstalled it but the error persists.
Installed Diet Tracker but they don't interfere with each on on the system at home so I know there's no problem there.
Nothing else installed except Windows updates.
I tried restoring back to the last time I used it . . . still got the error, so undid the restore.
I tried repairing Photoshop . . . no change.
I uninstalled Photoshop, rebooted, installed Photoshop. it loaded slower then and the last thing I saw load was plugins then something about Python and then the error again.
When I try to open the program, it goes so fast that I can't see what's loaded and where it stops now.
I searched for like problems . . . found one that they found was caused by a sound driver on an ASUS board but it was different. I tried rolling back the sound driver anyway and it didn't fix it so I updated it again. There was a reference to check the Event Viewer which I know nothing about but I tried it anyway . . . found nothing.
Any help will be appreciated or if you know a way to debug the load or slow it down to see what it's trying to load please clue me in. Thank you for any help.

O, OK . . . didn't solve the problem anyway. I am sorry I can't figure this out on my own instead of taking up everyone else's time. Downloading and installing 12.6
New driver installed but this did not resolve problem; still getting the error message when trying to load the program
FIRST!!! I want to thank everyone for your help . . .
While waiting for another idea, out of casual curiosity because I hate Win 7, I right clicked the ocn for PS and checked the list of options. Since this was a reinstall, I clicked on the Troubleshoot Compatibility out of curiosity . . . got a choice to Try recommened settings or Troubleshoot programs; I clicked on the 'Try recommended settings' . . . it came up with recommendation of XP Pro setting and I clicked on it and up came PS and installed some more stuff.
I am sure this can't be the right answer or it would have never worked in the original install, but it worked for the re-install and that gets me up and running for the time being . . . now to further test and make sure it's working right.

Photoshop CS3 Extended wont boot in Tiger

Hi, I am helping my friend to sort out some problem. Would appreciate all your expertise.
At present, my friend uses a iMac and is ready to install a Mac OS X Photoshop CS3 Extended Academic Edition.
However, as I load the DVD into the iMac, it just spins but does not load.
Thereafter, it spits out the DVD.
WOuld like to know if anyone encounter this?

Make sure the disc is clean and free of dust and finger prints.

Photoshop CS3 Extended Keyboard Shortcut Not Working

I installed the CS3 Master Collection that included Photoshop CS3 Extended. I've used Photoshop for going on a decade and I find the CTRL+ALT+I keyboard shortcut really handly to pop open the Image Size window.
Now, in this new version (don't after a clean format, reinstall of my XP OS) the shortcut no longer works. I check and it still has CTRL+ALT+I listed next to Image Size in the drop down menu as the proper keys, but it does not work.
Anyone having this issue?

I tried resetting the preferences but to no avail.
I'm avoiding having to do an uninstall/reinstall like the plague so If I can find what's causing it and fix it manually that would be preferred.
I have thought about running the Adobe updater but I'm concerned that it may cause more problems that it would fix (as this has happed to me before with other apps). Everything else works great and this is the only issue I've noticed.
Does anyone know if the update for Photoshop CS3 Extended addressed his issue (or knows of another cause that might be behind it)?

Cannot Activate Photoshop CS3 Extended???

Hi,
I cannot activate my copy of Adobe Photoshop CS3 Extended, after coming across a previous thread regarding this issue (Re: CS3 Retail Box. Key Won't Work) I contacted support but after 3 representatives they all claim to not be able to validate the keys (despite one still being in use on my wife's laptop!). I just want to deactivate the keys from the previous 2 PCs so I can install them on my newer machines, my old pc has been formatted without deactivation so I cannot do it myself and I am scared to deactivate the other copy as It seems I will not receive any support in reactivating it.
Here is a complete conversation with one of the 3 support representatives I have spoken to regarding this issue:
Thank you for contacting Adobe.
A representative will be with you shortly.
Thank you for your patience.
While you wait, you can try our community forums where experts are available 24 hours a day, 7 days a week.
You are now chatting with Vijet.
Vijet: Hello. Welcome to Adobe Technical Support.
mike stripling: Hi, I have here 2 keys for Adobe Photoshop CS3 extended edition which are telling me there is too many activations on them
Vijet: Hi Mike,In order to assist you in a better way can i have your Name your Email id and your Phone number please.
mike stripling: one of them was on a pc which has been formatted without deactivation and the other is on my wife's laptop which also needs deactivation as that will be formatted soon
mike stripling: Mike Stripling, [email protected] and I'm not sure which phone number it would be under
mike stripling: (it was registered 7 years ago)
mike stripling: I have spoken to two previous representatives who claim my keys are not valid yet after downloading cs3 from your website instead of installing from a disc it says for both keys that there are too many pcs using them at the moment
Vijet: Can you please provide me with the Serial Number for your Photoshop CS 3
mike stripling: [removed] & [removed]
mike stripling: Your previous representatives claimed this did not show on their system
mike stripling: but when I put it in photoshop it claims there are too many pcs using those keys
mike stripling: I can screenshot this if necessary
Vijet: Sorry to say Mike but the Serial Number you are giving me are invalid one's.
mike stripling: No they are not.
mike stripling: Why else would I get a big green tick and a page showing 'too many activations'
Vijet: Please allow me a moment while I look into your account and see why are you having this issue.
mike stripling: Ok.
mike stripling: I also found this support thread with your adobe staff responses on this issue which may be relevant: https://forums.adobe.com/thread/1491813
mike stripling: "CS3 can not be activated any more as it is end of life product, you can contact Adobe Support at Adobe - Contact Support – Download and Installation to know how to proceed for it & know about the options if there are any. Regards Rajshree"
Vijet: The serial number you are giving me are not the valid one,i have looked into my resources.
mike stripling: https://i.imgur.com/GRdHQmc.png
mike stripling: then why do I get this?
Vijet: May be Mike the Photoshop we are talking about is CS 2 not CS 3?
mike stripling: the screenshot I just linked is cs3 and the disc with the serial numbers, box etc all says adobe photoshop cs3 extended
Vijet: Because end of life of the product you are saying it's for CS 2 products not for the CS 3.
mike stripling: your staff post says cs3 as well
mike stripling: clearly stated in this thread https://forums.adobe.com/thread/1491813
Vijet: Allow me a minute let me look into it.
Vijet: From where did you purchased it?
mike stripling: It was years ago, but I believe amazon or something
mike stripling: I don't have the purchase order saved, who would save that for 7 years? :S
Vijet: Sorry to say Mike i wont be able to help you with this.

i am not an adobe employe and not an adobe spokesperson.
but my guess is it appears to adobe as if those keys have been 'hacked'. ie, published somewhere publically, used by others and are now blacklisted.

Can't unlock background layer using Photoshop CS3 Extended

I installed CS3 a few days ago (though I'm an experienced CS2 and Photoshop 6 user) and opened Photoshop CS3 Extended today for the first time.
The problem I'm having is with unlocking the background layer. I read in the documentation and on the Net about double-clicking and renaming the layer (which is what I did in other versions), or creating a new file with a transparent background, but those things aren't working for me in this version.
I opened a tiff file (a logo I want to use as the basis for a new image) but I can't unlock the background layer so I can copy, manipulate or add to it. Everything on the Layers drop-down menu is grayed out, as are the word Lock: and the symbols following it in the Layers window.
I tried creating a new image but when File|New dialog box opens the option to use transparent in the Background Contents dropdown is grayed out, too.
I'd appreciate some help with this.
Thanks,
Peggy

The issue has to do with the mode that you are in. If it is a TIFF or GIF file that you are opening, when you click on "Image -- Mode" you are likely to see "Indexed Color..." with a checkmark next to it. Be sure to select "RGB Color." Once you have done that, you can simply double-click the background layer in the layers palette to unlock the image.

Installation Issue : Photoshop CS3 Extended

Hi,
I've previously installed Photoshop CS3 for windows xp on my pc through electronic delivery. My problem is when i try to install Photoshop CS3 extended on my pc (after uninstalling CS3 version) it install Photoshop CS3 only not the Extended one. Also there is no way to deactivate my product.
Please help me.
Regards,
Nitin

Since this is a USER TO USER forum, not Adobe support, and as the
only way another user could reply is if they had that exact problem
and also had a solution, you may need to contact Adobe for help
In the US - Adobe General support 800-833-6687
In the US - Adobe Install Problems 800-642-3623

HELP - Installing Photoshop CS3 Extended using Apple Remote Desktop

Hello,
I have 12 MacPro's in a classroom. Is there a way to Install Photoshop CS3 Extended using Apple Remote Desktop (not on a server) to all the computers at once?
Thank you very much.

I don't have access to stand-alone PS CS3, only the Design Premium CS3 disc, but that includes Photoshop, so they're probably the same system. In any case, it does not use a standard Apple packaging scheme, instead using a custom mess of hollow folders, app packages, disk images, shared resources, and xml config files.
I briefly went ahead with the idea of doing an install, looking for what had been installed, and bundling up that virgin copy using Package Maker; but installing it elsewhere — with Installer, nevermind ARD — failed or left me with a 'crashy' copy of the apps. Maybe I just stink at making packages of other people's software, but my guess is that Adobe's installer throws files into nooks and crannies all over, or does a importantly-different install depending on your hardware/software config. In any case, I gave up and made an updated hard drive image including the new software. Deploying that worked fine.
Sorry I didn't have better news. Good luck. Joel

Final Cut and Photoshop CS3 extended

I've searched google and had no luck with this whatsoever.
I've opened an exported video sequence into Photoshop CS3 extended. (MOV, HDV 1080i60) In FCP6 the sequence had a time code of 0:02:03 whereas in Photoshop CS3 it is recognized as 0:02:02. It seems as if Photoshop is dropping a frame. Regardless, looking over my original MOV and the open Photoshop document I only have 51 total frames.
This looks like Photoshop and FCP6 see frames differently. When I export my video from Photoshop, Quicktime sees all 51 frames still there. When I pull the video back into FCP6 the timecode for the sequence is now 0:02:02 (just like Photoshop sees it) and it drops the last frame.
The frame is there! I can see it when I go over the video in Quicktime. For some reason FCP6 is refusing to show that last frame and will only display a timecode of 0:02:02 for that clip!
What am I to do? How do I get FCP6 to show that last frame?
Thanks heaps, in advance.

"I've opened an exported video sequence into Photoshop CS3 extended. (MOV, HDV 1080i60)."
do you mean you've imported an Image Sequence (movie exported from FCP as individual image files eg- tiffs)...
"In FCP6 the sequence had a time code of 0:02:03 whereas in Photoshop CS3 it is recognized as 0:02:02."
Where in Photoshop are you reading timecode??? Or are you just counting the individual images?
"It seems as if Photoshop is dropping a frame. Regardless, looking over my original MOV and the open Photoshop document I only have 51 total frames."
If the original movie was at 1080i60, and your clip is 02 seconds and 2 frames, that would imply you should have at least 60 images (29.97 (drop-frame?) / 30fps x 2 seconds)
"This looks like Photoshop and FCP6 see frames differently. When I export my video from Photoshop, Quicktime sees all 51 frames still there. When I pull the video back into FCP6 the timecode for the sequence is now 0:02:02 (just like Photoshop sees it) and it drops the last frame."
Now i'm really confused...
"The frame is there! I can see it when I go over the video in Quicktime. For some reason FCP6 is refusing to show that last frame and will only display a timecode of 0:02:02 for that clip!"
Yup... you got me... I have no idea... I think there is a non-dropped-frame timecode conflict in the Image Sequence(?) export from FCP and way PS is interpreting these images...
I have the good fortune of working in PAL-land, so I'm not too knowledgeable on what i think is your problem... hopefully someone from NTSC-land will chip in and help you out.
J
Message was edited by: James M.
Message was edited by: James M.

Photoshop CS3 Extended - Fading 1 color into another color

Similar Messages

Maybe you are looking for