Placing a plug-in

Down loaded a plug-in and want to try it out within Logic. Where do you put it?

Users/'you'/Library/Audio/Components

Similar Messages

Cycore FX plug-ins for After Effects 7

I'm having some issues finding the Cycore FX plug-ins for After Effects 7 (I know, it's old )
Using Windows 7 x64. The original discs were installed on an older OS, and have since been lost. AE 7 has been downloaded from the Adobe web site, but there are no additional resources/folders with the plug-ins to be found...any ideas???
[email protected]

It's strange that Adobe don't have the Cycore plug-ins available at the point of download. (It would make things so civilized.)
Thanks for the tip :-), I wonder if placing the plug-ins for CS3 in the appropriate folder for AE 7 might work??? Where did you find them???

Can't view raw files in Adobe Bridge CS4

Hi,
I bought a new iMac OS X version 10.8.5 . I have a Canon 5d Mark ii and I shoot in RAW. I installed CS4.. I also downloaded the newest version of the camera raw plug-in (5.7). I placed the plug-in in applications--> adobe photoshop CS4 -->plug-ins--> file formats.
In Bridge, I can only view the grey thumbnail that says CR2. I can click on it and it'll open up into camera raw where I can edit some and then open it into photoshop. I want to be able to view the images in bridge to know which ones I want to open up in camera raw. Also, when I right click on the thumbnail there isn't an option that says "open in camera raw".
Should I also place the camera raw plug-in in the applications-->Adobe Bridge-->plug-ins?
When I click on about plug-ins on photoshop, it's showing me 2 camera raw plug-ins.. version 5.0 and version 5.7. I can't find 5.0 to delete?
Thanks

If you just go to Help>Updates, Bridge should take care of this for you, unless you've managed to get multiple copies of the plug-in into the folder. If you manually installed things, check to see that there is only one plug-in there, then let Bridge do it for you.

Unable to open D3 NEF in CS3 (Mac) and CS2 (Win)

I have installed the latest Camera Raw Update file (Mac OSX 10.5.3), but when I try to open a nef-file that was taken with my Nikon D3, CS3 complains about an invalid file type - ??? Opening the same file in Nikon NX works without a problem. A friend of mine who still works with CS 2 on Windows XP (incl. Camera Raw 3.7) has the same problem.
Any idea? Since Nikon NX is opening the file the problem can't come from the camera, right? I apreciate every tip! Thanks in advance.

To answer the first question (from the first message), take a look at the installation instructions and make sure you have placed the plug-in in the exact folder. There is a user folder and a main (?) Folder that are named very similarly, and you must put the plug-in in the right one or it won't work. I apologize, but I have never used by Mac computer so my terminology may not be exactly right.
As far as the second question is concerned, I don't believe the Nikon D60 was supported until after CS3 was released. Ongoing support for Camera Raw is only provided for the current version of Photoshop. Photoshop CS2 might not be very old from your point of view, but in software it is practically ancient history.
The last version of Camera Raw that would work with Photoshop CS2 is version 3.7. If your camera is not supported in that version then you will either have to upgrade your version of Photoshop or else you can use the most current version of the DNG converter to convert your raw files to DNG files. Those can be opened in Photoshop CS2/Camera Raw 3.7.

How do I open CR2 in CS6?

My MBP is running OS X 10.6.8 with installed registered version of Production Premium CS6.
In previous forum threads (a couple months ago) there were similar issues w/ inability of opening CR2 in Bridge 5.0.2.4 and Camera Raw 7.0.0.308, and these people were seemingly helped with a link to a Camera Raw plug-in download...then placing that plug-in in the appropriate folder on your hard disk.
I follow this link (from the forum threads) and it's dead: Error 404, This page cannot be found. You know the one.
Does anyone know where I can find this update? (yes, I've gone through the standard software updates--and everything claims to be up-to-date)
Thanks!

Let's start with: which Canon camera are your CR2 Raw files from?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras
Compatible Adobe applications are listed here
Camera Raw-compatible Adobe applications
Which version of Camera Raw do you need? Is your CS6 compatible with the version of Camera Raw that you require?

Elements 8 error messages

It appears that when I open elements 8 I get the following message...
"The ordinal 30 could not be located in the dynamic link library Deco_32.dll" I can't even find the message on google as to what is causing it. I am using Windows XP.
Also, I have been using Elements for many years and have always added the plug-in Auto Eye...(this one is version 2) and I could use in 7. When I try to access it, it gives me many error messages...that I have NEVER seen in Elements before.
Did I make a mistake installing 8.0 with these problems...

I do not believe that the error messages related to Deco_32.dll are thrown by PSE and even that PSE ever uses it. I think this issue is coming because of some other application installed on the machine. May be some other Adobe application uses it and it is interfaring with PSE as well.
Good thing: I believe the below thread might be able to help you:
http://www.photoshopgurus.com/forum/photoshop-troubleshooting/3632-deco_32-dll.html
http://www.dlldll.com/deco_32.dll_download.html
There have been changes in PSE 8 that Organizer and Editor have got seperated and create their own folders in the installation location. Make sure that you are placing the plug-in at the correct location.
Regards,
Ankush

Photoshop Elements 7 CR2 files

Hello,
I have a Canon 50D and I'm trying to get my Photoshop Elements 7 to read the CR2 files- I use Windows 7 64 bit. I went to help- updates within the program and it says no new updates, so I tried again to open a CR2 file and I get this error: Cannot open because its the wrong type of file.
So I searched Elements 7 CR2 and got the downloads page: http://www.adobe.com/support/downloads/product.jsp?product=40&platform=Windows
Downloaded the 5.5 update, it installed correctly, put the Win 64 Camera RAW.8bi file into the plugins folder and still I get that error. Is there something I'm doing wrong?

Bryanar,
The Camera Raw 5.5 update does contain the 64 bit flavor as well which is specifically for PS. The instructions for the installation for the 64bit variant are posted on the ACR 5.5 download page and are as follows:
Manual 64-bit installation on Windows®:
If you are using Photoshop CS4 as a 64-bit application, you can use the Adobe Update Manager to install Camera Raw 5.5. If a manual update of the plug-in is required, please install the Camera Raw plug-in in two locations:
a. The CameraRaw.8bi found at the top level of the zip folder should be placed in the following directory:
Program Files (x86)\Common Files\Adobe\Plug-Ins\CS4\File Formats
b. The CameraRaw.8bi found in the folder labeled 64-bit should be placed in the following directory:
Program Files\Common Files\Adobe\Plug-Ins\CS4\File Formats
If you are trying to use Camera Raw 5.5 for Elements I would suggest just placing the plug-in found on the top level of the zip folder to the following directory
Photoshop Elements 7.0: Program Files(x86)\Adobe\Photoshop Elements 7.0\Plug-Ins\File Formats

Installing Shockwave Flash

I downloaded the correct file. Can someone tell me how to install it with Mozilla 1.3.1 - ?

Strange. From what I can remember when I had OS 9.1, when installing Shockwave Flash it automatically flashed an alert to ask me which browser I wanted it installed. The installer window listed all the browsers I had installed & all I did was pick which browser I wanted Shockwave Flash to go to.
I never "manually" placed the plug-in. The installer did all the work.
After you downloaded SWF, did you click on the "icon" to activate the installer?
Regarding rebuilding your desktop:
http://docs.info.apple.com/article.html?artnum=10182 Rebuilding Desktop File and Icon Recovery.
Or you can use Techtool Lite or Trash*Desktop (TD may delete Finder comments )to rebuild your desktop w/extensions off. Does a better job than manually & you avoid all the finger gymnatics. You just have to hold down the shift key to shut off extensions.
Restart to turn the extensions back on again.
If you are still having problems after doing the above, I suggest that you start a new topic so that your issue can receive more focused attention.
The original poster has marked this thread as "answered".

I figured out how to update APPLE TV2 to 4.4.1

I, like most of you was having trouble updating my APPLE TV2. I used the update software option and it would show that I was already up to date with version 4.3 although I knew there was an update to 4.4.1. I removed the Apple TV2 from the location I have it placed and plugged it into the power cord and then into my computer via the USB cable.
At first it did not show up so I rebooted the system and it appeared in itunes. By the way I'm running 10.6.8 on an 27" iMac I7. I chose the restore software option and it began restoring the software until the point of the firmware update and then I would get an error that the update was not complete. It took a couple of try's and then it hit me. The Apple TV was attempting to reboot during the firmware update stage but due to it being plugged into the wall there was constant power going to the unit. I unplugged the Apple TV from the wall and realized that the USB connection was enough to power the Apple TV. I attempted the update again and it worked like a charm!
I plugged the unit back into it's original spot and turned on the TV and the Apple TV. When I checked the system it was updated to 4.4.1 with no problems.
NOTE: write down your settings and passwords to your wifi / apple store / youtube and so on because you will loose those with the restore.
Hope this helps, Rick.

I don't know.

I just upgraded to Lion and switched my web page from MobileMe to Godaddy. But since upgrading to Lion a video I placed on my web page no longer shows up. instead I get "plug-in failure". That didn't happen until the Lion Upgrade what do I do?

I just upgraded to Lion and switched my web page from MobileMe to Godaddy. But since upgrading to Lion a video I placed on my web page no longer shows up. instead I get "plug-in failure". That didn't happen until the Lion Upgrade what do I do?

What's the format of your video? That will give you a hint as to what plugin is failing (or missing).
If you don't know, what's the URL of your site - it shouldn't take long for someone to work out the specifics.

A text crawl plug-in with darkened background that can be placed anywhere on screen?

Can you recommend a text crawl plug-in for FCPX that will allow me to place crawling text at any height on-screen, while having a darkened, translucent band behind the text? The best would be if the edges of the translucent band could be soft-focus. Thank you! Duncan

BenB,
Thanks a million for putting me in touch with FCP.co's site. I found an excellent crawl from Alex at Alex4D. When I had trouble loading it into FCPX, he sent a number of helpful emails with suggestions that eventually got it up and running. So thanks again!
Duncan

I am moving to the USA I have a 3 pin plug on my 85 w charger

Hi,
I'm moving to the US from Pakistan (our power is 220 volts like Europe). My charger has a 3 pin plug . Will the 3 pin work in America or do I need to get a converter plug? I also have a small two-pin plug lying around but I can't remember if this came with my new macbook pro or my previous macbook. It's just a plug- doesn't have a wire or anything - it does fit directly onto the magsafe power adapter but I don't want to use it if there might be a voltage issue when I get to the US. Is there any way I can try it out there safely?
my MagSafe specs: frequency 50-60 Hz, single phase
line voltage 100-240
output voltage
16.5 V DC, 3.65 A

The power adapter places one-half of the line voltage on the computer chassis/case. In Pakistan, and much of the world, the AC input line voltage is over 200VAC, and the voltage sensation can be annoying. In the US, the AC input line voltage is 120VAC, and only 60VAC is placed on the case. Very few people can sense that voltage level and, even without a grounded 3-prong AC plug, you probably won't feel anything.

How to Install Plug-in for PS cs5 to open RAW (.NEF) file for Nikon D810 Camera

I need someone to walk me through how to install a Plug-in for PS cs5 to open RAW (.NEF) file for Nikon D810 Camera.
I haven't used photoshop in ages and I got a new camera. I have been on the phone with Adobe (no help) and spent a couple of hours online trying to figure this out. I'm confused, frustrated and about to throw my computer out the window.
Also, I placed this in the "Photoshop for Beginners" since Photoshop CS5 doesn't appear anymore. I know CS5 is outdated but I spent hundreds of dollars on this program and you would think adobe would still honor its product.
Any guidance is much appreciated.
AJ

Odds are cs5 is too old. If you do a search on my the main Adobe website there is a list of compatible cameras for the last known update to camera raw for cs5.
Each version of Photoshop only gets so many updates for camera raw then it is necessary to upgrade Photoshop to get the next update for camera raw.
So you currently have 4 choices.
1 upgrade Photoshop
2 get Lightroom - latest version
3 get Photoshop elements -latest version
4 get dng converter - this will download the latest version an is the only option that is free.
The dng converter can be found by searching Adobe website.

Page numbers disappear in final pdf from *placed* InDesign pages

Hi,
Because of restrictions in export to booklet, I have imposed an indesign document by placing each page from one InDesign document into another (the publication is 8.5 x 11 landscape – the script provided within won't impose this). I then export that secondary Indesign file to pdf so that I can send it off to a digital copier to be printed, however, the page numbers don't print. All other master page items print, except the page numbers.
Anybody have a cure for this? (apart from collecting the two InDesign docs and shipping those off).
Thanks.
Mindy

Hi Peter,
"Script" used to be! The booklet maker that's built into InDesign, I suppose plug-in is a better choice of word.
Exporting to pdf is a good idea. I guess in my mind, I was wary of making a pdf out of pdf and potentially balling up the postscript in the rip. I'm not sure why placing an indesign file within an indesign file felt a better solution to me. The other thing that I thought of (just after I posted of course) was releasing the master page items, so that the page numbers were "official".
I'm going to export to pdf as you suggest. Seems the simplest solution. Thank you.
Mindy

I'm having a problem with my Itunes, when i plug in my ipad mini.

I just got a new ipad Mini for christmas and i wanted to sync it with my music on itunes from my computer. I just had to get a new computer because my other one had broke. So i downloaded just a few songs to my new computer that i wanted to put on my Ipad. But now when i plug in my Ipad mini to my c mac to sync it, Itunes begins to load it then crashes. I have tried updated my itunes, my ipad and my computer being new is already fully updated. So why can't i Sync my Ipad mini?

First question: You said: "I downloaded just a few songs to my computer ...". Have you placed them in iTunes on your computer?
These suggestions:
If iPad doesn't appear in iTunes or you can't sync iPad
Follow these steps, testing after each:
Disconnect other USB devices from your computer and connect iPad to a different USB 2.0 port on your computer (not on your keyboard).
Turn iPad off and turn it on again. Press and hold the Sleep/Wake button on top of iPad for a few seconds, until a red slider appears. Then slide the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
Restart your computer. Then reconnect iPad to your computer.
... come from this article:
http://support.apple.com/kb/TS3274

Placing a plug-in

Similar Messages

Maybe you are looking for