Planned Depreciation Reports by period

Hello SAP Experts,
Currently we use Asset Explorer (AW01N) to see the planned values for an asset by period before depreciation is run.  We need to make many manual depreciation adjustments and would like to know if there is a report that lists all assets in a company code with the planned depreciation value by period.
I thought this value is calculated real time (ad-hoc) and is not stored anywhere in a table or no such report exists.
Does anyone know of a report or a table where I could these values?
Thanks for your help!
Jessie

Hi Jessie,
Try using S_ALR_87012936 - Depreciation on Capitalized Assets (Depreciation Simulation) .
There are a couple of standard variants - 1_SAP_1_LINE and /SAP_1_LINE - calculating the planned depreciation for 5 respectively for next 12 periods.
Hope this helps
Severina

Similar Messages

  • Asset planned Depreciation by each period (Jan -Dec)

    Dear friends,
    Could some one suggest the Report for List of assets by costcenter with planned depreciation for all periods (Jan-Dec) for forthcoming year, in my example for the yaer 2011.
    Thanks in Advnace,
    Ram

    Hi,
    Check - S_ALR_87012018 - Depreciation and Interest
    Best Regards,
    Madhu

  • Reversing Planned Depreciation Run

    Hi,
    I have executed planned posint run in AFAB until 10 the period.
    I want to ran planned depreciation for 8th period. Whehther Its possible to undo the previous planned posting runs.
    Thanks
    Hari

    Hi,
    the depreciation run for period 8 is required for all assets or for selected assets.

  • Planned depreciation value for each period

    Hi,
    Where can I get the planned depreciation value for each period? I need the fields for customised report.
    Thank you

    Hi,
    You can get the dep planned values for the each period by using SAP standard report S_ALR_87012936.
    In the selection screen of that report, click on All selections button on application tool bar. Then you will be able to see the all the available fields for selection.
    Choose evaluation period as Month.
    Now execute it. After getting output, you need to go for change layout and adopt fileds like Dep 01-2010, Dep 02-2010, Dep 03-2010....Etc till Dep 12-2010.
    This will fix your requirement.
    Thanks,
    Srinu

  • Posted depreciation is missing in period 7, planned depreciation for period 8 is doubled

    Hi Experts,
    I would like to ask for some explanation for this issue and how to correct the error.
    Performed Depreciation run via AFAB transaction.
    then upon checking in asset explorer. period 7 is missing while the amount in planned depreciation for period 8 is doubled.
    could you please explain how and why this thing happened?
    thanks in advance!

    solved.

  • Planned depreciation not showing for posting period

    hi,
    I have query for planned depreciation.
    my company code is having following setting.
    1. check "dep to the day" is there.
    2. in Fiscal year Variant for the period 7 & 8 the setting is as below.
    month day period
    8          1      7
    8          29    8
    so the planned depreciation is not showing in period 8, in period 7 it is showing double (for period 7 & 8). this is the same for posted depreciation also.
    please suggest if any setting available for the same.
    Thanks,

    Why do you have your both periods 7 & 8 setting in the same month 8 ??
    Every period and month should be exclusive and look something like this > http://www.saptechies.com/userfiles/Define-Business-Area-5.jpg
    Please post your query properly if you don't get this explanation.
    Zub

  • Period changed,how to re-calculate plan depreciation

    Dear All,
    I changed financial period interval,e.g the  period interval is 26th of previous peiod - 30th of current period,i changed to 1th of current priod - 25th of current period,how to re-recalculate plan depreciation,thanks
    the FY is still year dependent

    Hi,
    Please try AFAR transaction to re calculate planned depreciation for all of your assets in your company code.
    Thanks,
    Srinu

  • Depreciation report - period wise

    Hi Can anyone suggest depreciation report periodwise for posted dep. ...Std SAP report
    Thanks

    Hi,
    Please check correctly, this is a standard SAP report, which will be available in all versions.
    You are in which version?
    other wise go to transaction SE38 and enter program name as AQZZ/SAPQUERY/AM28============ and execute it.
    Or else go to AQ01 and choose query number 28, and press execute button.
    Thanks,
    Srinu

  • Prior year planned depreciation never posted. How to post in current year?

    Hi Experts,
    Planned Depreciation was not posted in 2010. Is it possible to post that in 2011? What all steps are required?
    When I execute AW01N for the asset in question, system gives error "Message # AA669 - Fiscal year 2010 is already closed in Financial Accounting.
    I checked OAAR the last closed fiscal year is 2009.
    I executed AFAB in 'Test Mode' for Period 12, 2010, system gives error message "Period 12 is already posted".
    Your inputs will be appreciated.
    Thanks & Regards,
    Rachana

    Dear Rachana
    The long text of error AA669 is very clear about the root cause of the
    error.
    The idea behind the message: it is not allowed to close first general
    ledger before subleger. This leads to inconsistencies. It is common
    accounting principle to always close the subledgers first and only
    then close the general ledger (FI-GL).
    The solution is: re-open fiscal year in FI-GL (txn OB52) and follow the
    steps from note 619969.
    o  RAAFAR00
    o  RAPOST2000
    o  RAPERB2000
    o  RAJABS00
    If it is not possible to open the fiscal year because audit has already
    been completed: workaround (which is not quite correct from the legal
    point of view) is the report RACORR20_A from note 29694.
    Best Regards,
    Blaz

  • Deleting Planned depreciation.

    Dear Experts,
    Is it possible to close the FI-AA year without postin the planned depreciation?
    The issue is as under:
    the acqusition value of asset is 30000, chargable @ 4.75% depreciation.
    depreciation were posted upto 11th period, then we change the depreciation key (20%) as per the AS rule for that year. System shows a adjusted value in 12th period (which we dont need), to meet our requirement (depreciation for that year should be 30000*20%=6000) we passed a unplanned depreciation in 12th period, we get depreciation 6000.
    But for the particular period 12th only system is showing one more planned depreciation, which we dont need at all. Unless we post that planned depreciation, system will not allow to close that year.
    since we cant reverse the posted depreciation, is there any other alternative to close that particular year without posting that wrong planned. we have already posted depreciation for 12th period but again it is showing one more 12th period with planned depreciation.
    Status-Periodord depunpl depreserverevaluatecurrency
    Posted---09_____121.03-_____00_________00____00____INR
    Posted---10_____121.03-_____00_________00____00____INR
    Posted---11_____109.31-_____00_________00____00____INR
    Posted---12_____1,303.97____15,162.53___00____00____INR
    Plannedu201412____6,000.00-____00________00____00____INR
    _______________6,000.00-___15,162.53-__0.00___0.00___INR
    Please suggest what to do, as we have to generate reports.
    Thanks & regards
    Maurya Shantanu

    Hi Ajay,
    Thanks for the helpful answer, but we dont want to post any document in the closed fiscal year.
    when i'm assigning the depreciation key zero to that particular asset the extra planned depreciation is getting dissappear.
    is it the right way to do so, does it going to effect in future.
    please suggest.
    Regard,
    Maurya Shantanu

  • Ageing report-ageing period doesn't appear properly

    Hi I am doing ageing report - ageing period  not coming properly- actually base date should be added with additional months(t052-zmona) depending on payment term (t052-zterm). if i give 12 months its adding as 12 days with basedate . so i need the code to convert the months into days and then add it to basedate.anybody please help me. thanks.

    Hi Daniel,
    Azure unloads your site if it is idle for the standard 20 minute timeout, which can cause slow responses for the initial site users after it is unloaded.  Enabling Always On essentially causes Azure to automatically ping your site periodically to ensure
    that it remains in a running state.  Always on is not an available option on lower end plans.  
    However in Basic or Standard mode, you can enable Always On to keep the app loaded all the time.
    It is not a known issue, I suppose in theory it could consume more CPU cycles and thus could require the deployment of more infrastructure.
    Couple of things you might want to check :
    - Increase the Instance count
    - Check the Monitor Tab in Azure Website to see how much of CPU, DataIN and Data Out time is taken for a request to the site.
    Recommend you to see this thread discussion on  Failed request tracing
    for troubleshooting on Slow requests  and a video  on  
    Troubleshooting Slow Requests with Failed Request Tracing that might help troubleshoot the slowness of website.
    Regards,
    Shirisha Paderu

  • Incorrect Planned Depreciation after posting unplanned depreciation

    Hello Everyone,
    We have encountered a case whereas an asset acquired in April 2008 with 5 years useful life was planned to be fully depreciated in period 2 of 2009. Below are the details and postings done:
    1 - NBV -> 1,056,143.00
    2 - Posted Write-up -> 18,054.00
    3 - Posted Unplanned depreciation -> 1,038,992.23- (the system actually issued that only the amount of 835,445 can be posted as unplanned dep. In order to bypass this, user changed the dep key to MANU then changing it back after the unplanned posting)
    4 - Posted Ordinary Dep for Period 1 of 2009 -> 19,892
    5 - Planned Ordinary Dep for Period 2 of 2009 -> 15,312.77-
    Once the amount of 15,312.77 is posted, the asset will have Zero NBV.
    *My question is: Why did the system posted the 15,312.77 in period 2 only and not spread the amount until 2013 since the asset's useful life is for 5 years (until 2013).
    We have tried recalculation of values and the planned depreciation remains the same for period 2.
    Hope someone can help.
    Thank you in advance.
    Regards,
    Cholo

    Hello Vinod,
    Period control is 004 which is configured in AFAMP having 01 - Pro rata at period start date for Acquisition, Acquisition in the following year, Retirement and trasfer. Does it have anything to do with the start of depreciation?
    Also, when we adjust the ord dep start date to < April 26, the original planned depreciation is not affected for the current FY but only the next FY and moving forward.
    For example:
    Asset worth 12,000 to be depreciated in 10 years
    1 - Alrready in period 3 and 200 has been posted
    2 - Posted unplanned dep of 800
    3 - Total planned dep for this year did not change (1,200)
    4 - System calculated for current year depreciation 1200 (planned) + 800 (unplanned) = 2000
    5 - And for the next years 12,000 - 2,000 = 10,000 / 9 years
    Should it not be that that 12,000 - 1,000 (200 planned + 800 unplanned) = 11,000 / 9 years and 9 months?
    It seems that the unplanned depreciation affected the depreciation computation of the asset only in the next FY.

  • Asset Unplanned Depreciation posting for period 12 where ord dep is posted

    Dear Experts,
    I have a requirement where i want to post Unplanned/Manual depreciation for asset for period 12 where i have already posted ordinary depreciation and now when i am trying to change the post key i am getting a message "Enter a depreciation key with 'depreciation by days'
    Is their any possibility where i can post some depreciation amount manually or through unplanned depreciation for period 12 without disturbing Planned depreciation amount.
    Regards,
    Rahul

    No,
    a depreciation key with 'depreciation by days' you can only change in a depreciation key with 'depreciation by days'
    This is set-up in the depreciation key
    This is the help:
    Depreciation calculation to exact day
    Specifies that the  system calculates depreciation to the day.
    Use
    Any period control methods entered in the depreciation key are ignored for the entire useful life of the asset. This applies to all transactions (acquisitions, retirements, and transfers). The system always uses the asset value date as the depreciation start date.
    The "depreciation to the day" function becomes active for an asset as soon as the asset has a corresponding depreciation key and the asset is capitalized (posted to). Once this takes place, it is no longer possible to switch off this function for the asset, even if you change the depreciation key. On the other hand, it is not possible to activate this function for an asset after it has already been capitalized using a different depreciation key.

  • What-if Depreciation Report

    Hi,
    I need to build the Fixed Assets 'What-if Depreciation Report' as a BI-Publisher report containing additional data not displayed in the standard report. This report is kicked-off together with running the 'What-if Analysis Program' from a form in FA, but I can't find where the concurrent program is registered to run together with the analysis program generating the data in order to replace the RDF with the my custom RDF. Does anyone know where this is done?
    Regards,
    Arthur

    Julie,
    In note 30260 point 3, you get the explanation.
    The reporting without the option 'posted values' calculates the
    asset history sheet as if the catch up method is switched on.
    When you use catch up, you have even no problems in comparing the
    asset history sheet with the planned values in AW01N.
    When you use smoothing, you get a difference between planned and
    posted values, as soon as you have postings in the current year,
    change the depreciation method and so on.
    When you use smoothing, you have to use the indicator 'posted values'
    in reporting.
    You will find the indicator 'smoothing' or 'catch up' in the IMG of
    asset accounting - Integration with the General Ledger - Specify
    Intervals and Posting Rules
    Best Regards,
    Blaz.

  • Depreciation repeat run (period 14) - no areas to post to...

    Hi Experts,
    We have problem -  cannot run Repeat run depreciation (posting to period 14 - audit adjustment)
    We did reverse document for fixed asset, therfore we would like to do Repeat run depreciation.
    However while we run, the error showing<i> "there are no areas to post to in company code xxx"</i>
    Kindly advise. Thank you.

    Hi,
    - simulate AFAB for period 15 (if exists) for the specific asset and see if it has any entries
    - try repeat run for period 14 specifying the asset number in the selection screen
    - check for Posted Values tab in AW01N for the asset in question and see if any yellow triangle is seen or any depreciation planned.
    Rgds.

Maybe you are looking for