Planning Layout- Assigning Curr and Unit

Hi All
We created a layout for statistical items everything is fine we selected amount and quantity as key figures.
Please let me know the possibilities of actions we are looking. I dont know whether we can do it or not just for confirmation from this forum.
1)
Basically Planning Layout is coming like this:
Short term loans - 3000 - INR - 0.000 -
Creditors Days   -   0.00 - INR - 30.000 - DAY
Is there any chance to assign unit or currency to items in a column like i mentioned below.
Short term loans - 3000    - INR
Creditors Days   - 30.000 - DAY
2)
Is there any possibility that: If we enter the data in Amount field, the quantity field must become disable automatically, in the same manner if we enter the data in Quantity field the amount field must become disable.
Not in a columnwise, by rows wise.
Please clarify my doubts. I appreciate your valuable response.
Regards,

Hi,
1) For currency include the Currency characteristic in the layout and appropriate Planning objects should get it. For Day could create a custom characteristic with the master data value restricted to "Day" in the Planning level.
2) From what I understand your objective here is to ensure that the amount and quantity are in sync and change in one should not show incorrect figures in the other. Would suggest making the Amount as a Calculated Key figure in the enhanced layout(transaction upx_mntn) so that change in one causes the other to be changed appropriately.
hope it helps

Similar Messages

Planning layout for material and cost element

Dear all,
i need to upload data from r/3 and start planning from data i have uploaded.
data is as follows:
year month material amount
what i need to do is to put data in planning layout and put cost element next to that and manually enter cost element.
so desired column is like that:
year month costelement( enter manually) material amount(enter manually)
is it possible and how?
thanks

Hi,
You can do it.Take a look at the best practice below.It is telling step by step how to do cost center accoıunting planning.
http://help.sap.com/bp_biv235/bi_en/html/BW/CostCtrPlan.htm
Regards.

Planning Layout Column Width and Text Wrapping

Hello,
Is there a way in a BPS layout to set the column width to a certain length and have the column heading texts wrap? I noticed an answer for adjusting a table API for BW Web columns, but not BPS.
Thanks,
Cherie

A coworker figured out by selecting the line break in the change subcomponent it wraps the column text.

Amount and Quantity (with curr and unit) into single column

Hi All,
I have a query with several measures in the rows and two columns, one with 0AMOUNT and the other with 0QUANTITY. At least one of them (0AMOUNT, 0QUANTITY) equals 0 and I'd like to have the query just one column with 0AMOUNT and if 0AMOUNT = 0, then to put there 0QUANTITY. So I used this formula :
( 'Amount' <> 0 ) * NODIM ( 'Amount' ) + ( 'Amount' == 0 ) * NODIM ( 'Quantity' )
The problem is that I need to preserve 0UNIT and 0CURRENCY and if I remove NODIM the formula of course ends with error. Any idea how to solve this??
Thanks for any suggestions.
Pavel

user9502062 wrote:
i want to do this without using any predefined functions.Well this solution still uses an analytical function if that's allowed...
SQL> ed
Wrote file afiedt.buf
1 select deptno
2        ,rtrim(max(decode(rn,1,ename))||','||
3         max(decode(rn,2,ename))||','||
4         max(decode(rn,3,ename))||','||
5         max(decode(rn,4,ename))||','||
6         max(decode(rn,5,ename))||','||
7         max(decode(rn,6,ename))||','||
8         max(decode(rn,7,ename))||','||
9         max(decode(rn,8,ename))||','||
10         max(decode(rn,9,ename))||','||
11         max(decode(rn,10,ename)),',') as enames
12 from (select deptno, ename, row_number() over (partition by deptno order by ename) as rn from emp)
13* group by deptno
SQL> /
    DEPTNO ENAMES
        10 CLARK,KING,MILLER
        20 ADAMS,FORD,JONES,SCOTT,SMITH
        30 ALLEN,BLAKE,JAMES,MARTIN,TURNER,WARD
SQL>... but it does limit you to how many rows you can join together.
Otherwise I'd suggest you go back to your teacher and ask them for more information about why you can't use predefined functions.

Planning Layout - Library/Reporting Table Assignement ?

Hello,
Anybody knows how to add characteristics/key figures to the ones available in standard when creating a planning layout for manual planning ? Via table KPPT you can deduct that planning areas are asigned to sort of libraries (1P1, 1P2...) but these libraries cannot be found in table T801K.
Thanks for your help.
Regards
Thomas

Paulo,
When you create a new element as you describe, one can select among proposed characteristics/key figures but if I want to use one that is not proposed; is there a solution for that. My precise request is to be able to include budgeted costs in a cost element planning layout.
Thanks and regards
Thomas
Edited by: Thomas Van Aken on Aug 3, 2009 12:03 AM

Attaching documents in BI-Integrated Planning layout

Hello,
We have implemented BI-IP. One of the requirements is that we provide capability to attach documents to the planning layout for 0FUNDS_CTR and 0CMMT_ITEM characteristics of our model.
However, there is a problem. Commitment items constitute Funds Centers. The same commitment item can belong to more than 1 funds center. So, if a document is attached to a particular commitment item, and that commitment item belongs to more than 1 funds center, then the same document would show up for that commitment item on ALL the funds centers that include that commitment item. We want to change that, so that if the document it attached to a commitment item within a particular funds center, that it shows up only for the commitment item of that particular funds center and not on all funds center that include that same commitment item. How can this be accomplished?
Thank you,
AG

Ravi,
Let's say you are authorized to funds center 200001 and funds center 200002 and commitment item 5000. Now commitment item 5000 is included for funds center 200001 and 200002..both.
if you decide to upload a document to commitment item 5000 under funds center 200001, then would not it also show up under funds center 20002 because it includes the same commitment item and also has authorization for it? I think this happens because the documents are being uploaded to commitment item master data.
I will ask, but I think setting up authorizations on commitment items are not the option becasue we have too many of them.
Maybe making Funds center compounded characteristic with Commitment item might help?
Not sure

Create new planning layout - KE11

Hi everybody,
I'm trying to use the tcode KE11 but I don't know how can I create new planning layout for sales and proft plan.
Anybody can help me?
Thanks & Regards

Hi,
Use T.code KE14 to create a Planning layout.
Hope this helps.

Table for maintenance plan and maintenance cycle and Unit

Hello,
I need to know the table where the values are stored for maintenance plan, maintenance cycle and Unit.
I know that we can get the maintenance cycle and unit from MMPT table.
Question 1
If the maintenance plan has only a single cycle then the data is stored in above table MMPT, but if a maintenance plan has mutiple cycles like 1 maintenance plan has maintenance cycle as 364 Days and 1092 days then the data is not stored in MMPt table.
Question 2
Requirement is I need to develop a report where in I need maintenance order, maintenance plan and the relevant maintenance cycle and unit. Supose an maintenance order is created for the above maintenance plan which has 2 maintenance cycle how can I identify for which maintenance cycle the order is created.
Regards,
Narendra

Hi,
Please review PM tables
PM/SM/SD Tables
MPOS                       Maintenance Items
AFAB     Network - Relationships
PLKO     Task list
PLAS
AFFH     Operations
PRT assignment data for the work order
AFFL     Work order sequence
AFFT     Order process instructions
AFFV     Order process instruction values
AFFW     Goods movements with errors from confirmations
AFIH     Maintenance order header
AFKO     Order header data PP orders
AFPO     Order item
AFRC     Table of planned changes to conf.: Automatic goods receipt
AFRD     Default values for collective confirmation
AFRH     Header information for confirmation pool
AFRU     Order completion confirmations
AFRV     Pool of confirmations
AFVC     Operation within an order
AFVU     DB structure of the user fields of the operation
AFVV     DB structure of the quantities/dates/values in the operation
MPOS     Maintenance ITEM
AFWI     Subsequently posted goods movements for confirmations
AUFK     Order master data
AUFM     Goods movement for order
MPLA     Maintenance Plans
BGMK     Master warranty header
BGMP     Master warranty item
BGMS     Text item master warranty
BGMT     Master warranty text
BGMZ     Warranty counter information
CRHD     Work Center Header
CRTX     Text for the Work Center or Production Resource/Tool
EQKT     Equipment short texts
EQST     Equipment link to BOM
EQUI     Equipment master data
EQUZ     Equipment time segment
HIKO     Order master data history
IFLO     Functional Location (View)
IFLOT     Functional location (TABLE)
IFLOTX     Functional location: Short texts
IHGNS     Plant maintenance permit segment
IHPA     Plant Maintenance: Partners
IHSG     Object-related permits in Plant Maintenance
ILOA     PM object location and account assignment
IMPTT     Measuring point (table)
IMRG     Measurement document
KAKO     Capacity Header Segment
KONP     Conditions (Item)
KONV     Conditions (Procedure Data)
OBJK     Plant Maintenance Object List
QMEL     Quality notification
QMFE     Quality notification - items
QMIH     Quality message - maintenance data excerpt
QMMA     Quality notification - activities
QMSM     Notification - Tasks
QMUR     Quality notification - causes
STPOA     Name is does not have an A at the end; BOM items
T001     Company Codes
T001L     Storage Locations
T001W     Plants
T077D     Customer account groups
T003O     Order Types
T352R     Maintenance revisions
T353I_T     Maintenance activity type description
T356     Priorities
T357G     Permits
T357G_T     Table 357G texts
T370A     Activity category for PM lists
TINCT     Customers: Incoterms: Texts
TVKO     Organizational Unit: Sales Organizations
TVKOS     Organizational Unit: Divisions per Sales Organization
TVKOV     Org. Unit: Distribution Channels per Sales Organization
TVTA     Organizational Unit: Sales Area(s)
VIAUFKST     Order selection view
MMPT Cycle detail
Regards
Carlos

In Organization plan, Can we assign an organization unit under a position..

hi experts,
In Organization plan, I want to assign an organization unit under a position..If possible, how?..
For example HR dept and Purchase dept need to be assigned under a position say MD or likewise..
Thanks in advance..

Hi Ramesh
Check this Link
http://help.sap.com/saphelp_40b/helpdata/en/9d/9bd0348a955c0ee10000009b38f83b/frameset.htm
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/404169f4-6ddd-2a10-35a0-e4a5a7c539b2
Hope this will be useful
Regards
Vel

Issue regarding Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART in SAP TPM IP

Gurus,
I am facing an issue regarding SAP TPM IP ( HANA)
I have 3 Infoproviders
Planning infocube, Planning DSO1, Planning DSO2 and i created multiprovider and added these 3 infoproviders into it. I have created Aggregation level on multiprovider. Created Bex Input ready query on Aggregation level.
Issue is Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART.
I tried debugging it and found it is trying to read i_r_pro -> n_ts_part. It is populated with only 3 values (i.e. 2DSOs and 1 Cube), whereas <l_partprov>-partprov is referring to Aggergation level, hence read statement isn't successful, it is dumping.
The class CL_RSD_INFOPROV_CACHE->GET() method is trying to populate the N_TS_PART.N_TS_PART uses P_R_INFOPROV table which seems to be already populated. So, I debugged all the below methods to find out how the P_R_INFOPROV but couldn't find any clue.
Can any one help,it would be really help.
Thanks
Ashok

Hello Gregor,
On the launch of planning layout it throws an error message:
Planning is not possible RSCRM_IMP_CORE008.
When I debugged, i got to a point wherein
particular Real Time Planning DSO is
not getting retrieved under the MultiProivder in below class.
Class: CL_RSCRM_IMP_ACTIONS_SERVICE, Method: GET_INFOPROV is not
returning the real time Info-Provider Name(i.e. Planning DSO)
underlyingthe Multiprovider.
I've also tried to run the report mentioned by you for the Multiprovider but issue still exists.
Let me know, if you have any pointers on this topic.
Thanks,
Jomy

Transport of planning layouts and planning profiles (CO - Cost Center Acc.)

Dear Experts,
I am new to SAP CO and would like to transport new planning layouts and planning profiles. Therefore I clicked on transport and the following customizing task is added to my transport request:
IMG Activity Create Planning Layouts for Cost Element Planning
-> ke34
->
CEFORMC
CEFORMF
CEFORMS
CEFORMT
CEFORMV
CEFORMW
CEPRINT
CESETS
TKEBS
TKEP1
TKEP2
TKES1
TKES2
TKES4
TKES5
TKESK
The transport worked without error.
Unfortunately none of the layouts arrives in test environment.
Do you have any idea of what I could have forgotten?
Thanks a lot!!
Thomas

After you have released the transport request, the objects of the request are available in the target system and the target clients. If you want to carry out a client copy within the same system, proceed as follows:
       1.      Log onto the system in the desired target client.
       2.      Start the client copy (Tools > Administration > Administration > Client Administration > Special Functions > Copy Transport Request; transaction SCC1) and enter the source client and the number of the transport request.
       3.      Then start importing the objects.

Creating Planning layout and profile in Integated planning

Hello,
We have a requirement like to craete a planning profile and planning Layout in in bi(Planning profile and Planning layout concept like bps) in Integrated Planning.We want to know what is the corresponding structures in Integrated Planning for planning profile and planning Layout .The requirement is in CRM once we create the structure crm will use the same for acessing the data.
If any one has already worked on that or having any doc please give ur suggestions .
Thanks in advance
sr

Hi,
Stand corrected.
Have you looked at the below thread
Re: Trade promotional planning CRM and BPS

Layout assignment to sites and assortments

Hi
In Layout concept,
it is poosible to assign the layout to the site / it is possible to assign the layout to the assortment.
Could any one help me what are the advantages of doing this.
Which one is better option. Assigning layout to site is good option or assigning layout to the assortment is a good option.
What are the benfits of doing this assignmnets.
Why sap has suggested these two methods.
can we simultaneously assign layout to sites and assortments.
Thanks
Varatharaj jayraman

Any capable retail expert, plz provide some idea on this. Moderator plz take up this issue to sap.

CO-PA planning for individual months and previous year with same layout

I would like to create a planning layout that uses a SINGLE value to define multiple period/year columns, which is driven by the value of the first period of the plan years.
The planning layout would look something like this:
2012 2012 2012      2012   2012          2011
JAN   FEB   MAR u2026   DEC    TOTAL     TOTAL
I want to create a variable PER01 and use the following as my column definition
PER01               (JAN 2012)
PER01+1               (FEB 2012)
PER01+2               (MAR 2012)
PER01+11                (DEC 2012)
PER01-1 TO PER01-12                           (TOTAL 2011)
What am I doing wrong in the following sequence?
1. Create local variable in transaction KEPM
Edit>Variable>Define variable
Here is my entry:
Characteristic          Period/year (Characteistic PERIO)
Variable                               PER01 (Note zero-one, not oh-one)
Value from                               001/2012 to 012/2012 or
               001/2012 to 001/2012 or
               Blank
What should be u201Cvalue fromu201D range be set to from the three above choices?
2. Create a planning level
Which of these is correct for the selection criteria for period/year range?
(X)          PER01
(X)          PER01      to      PER01
(X)          PER01     to      PER12
3. Iu2019ve tried I think about all possible combinations and permutations of values and keep running into this error message:
KG1003
Planning package can not be edited with planning layout
Planning layout has one or more variables for characteristic u201CPERIO.u201D These variables are given values from the selection criterion for the planning package. The selection criterion (single values and/or nterval) must match the variables.
The system tries to replace the variables in the planning layout with the selection criterion for the planning package. If for example, there is a variable for asingle value in the planning layout that is a planning characteristic, then the selection criterion must contain a single value. If there are two variables from the from and to value of an interval in the planning layout for a characteristic, then an interval must also exist in the selection criterion.
SAP course AC605 states that "Users will be prompted to enter the values for these variables when planning."
To date, I am not getting a popup to allow me to enter in period 001/2012. What am I missing/overlooking?
Thanks,
Bob

Thanks Ajay for your reply.
In the sake of completeness, here is my solution incorporating your suggestion:
Characteristic     Variable     Name                          Value from    Value to
PERIOD/YEAR     PER01     FIRST PERIOD/YEAR     001/2012     012/9999
Settings
Planning level     MYLEVEL          001/2012
Planning package     MYPACKAGE     001/2012
Planning layout      MYLAYOUT          PER01, PER011, PER012, PER01+3, etc.
The trick was to specify only the single value 001/2012 for period/year as shown above, rather
than specifying a range..
Bob McGaffic
Pittsburgh, PA

Creating a planning layout in BW BPS(3.5 unicode) and use it in crm 5.0 ?

How can i create a planning layout in BW BPS(3.5 unicode) and use it in crm 5.0 ?
Any thoughts how to do it please.
Regards,
Rao

Inform me if i am getting it right...
Step 1 : You are loading data for 2007 for example, do the distributions, everything is ok.
Step 2 : You are loading data for 2008, do the distributions, the data from 2007 are distributed too.
If this is the case just create a data slice gor 0fiscyear, to restrict the data to be affected by the planning functions.
Or is the Step 2 is that you are loading extra data for 2007 ?
regards

Planning Layout- Assigning Curr and Unit

Similar Messages

Maybe you are looking for