Please help... I HAVE PROBLEM WITH MY BUTTONS OF MY NANO (1st gen)

my nano is freezing, when I restore it, the center button is working only for first time after restoring nano, I can reset it(center button + menu) anytime, after that the buttoms still are not workink. I dont know that do I do... please help me...

Hello
It would be very interesting to know how old is your notebook and the battery.
Did you remove the battery while the notebook was used with power supply?
As far as I know its not optimize for the battery life if it is always attached to the unit. If you used your unit with ac adapter, the battery pack should be always removed from the notebook. Please read in the user manual how to handle the battery.
Bye

Similar Messages

Please help I have problems with songs,podcasts,and just general media play

hey guys, I'll get straight into it. My problem is that many of the songs and podcasts in my library come up with the little exclamation mark when I havn't changed anything or deleted anything, so I have to find the original files, which occasisionally just dissapear for no apparent reason. Also I have problems with d/l podcasts as sometimes it wont d/l the newest edition etc but comes up with the little '!' mark. I have just upgraded to iTunes 7 and although the problem was occuring before the upgrade just aggravated it, and messed up my library files causing me to revert to an older library.
Now last and most importantly, my audio has suddenly become choppy since I upgraded. This is similar to the problem I have with the sound in Quicktime only working properly if I keep all other apps and tasks to a bare minimum (even if they take up barely any system resources). This seems strange as my system is not exactly poor performance.
Thanks in advance guys !

Hi,
If you right click a file, and do getinfo on the summary page this will give a file location, is this matching the file location on your hard disk? If not that might explain the exclamation marks?
Kind Regards
Rich

Hello plz i need yours help i have problem with my i cloud back up when i restore old back up t

hello >> plz i need yours help i have problem with my i cloud back up when i restore old back up my problem exact with contact cause it disappears from contact list

iPhone: Transferring information from your current iPhone to a new iPhone

I have problem with the home button it is no function after i un plug the from usb any can help, I have problem with the home button it is no function after i un plug the from usb any can help

any one can help problem of home button ... is snice download the ios5 the home button got problem.But when using the USB there is no problem

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

PLEASE HELP.. PROBLEM WITH RESTORE

okey, well i have this huge problem. i got my ipod 2 weeks ago from the US, i live in poland and not many people know how these things work so i ask that someone here can help me..
a week ago.. the ipod froze my computer, i could do nothing with it. so i had to restart it.the problem was that my ipod was connected to the computer still.. but my comp wouldnt start so i had to disconnect the ipod.(yes the DO NOT DISCONNECT icon was on the ipod.. but wut else could i do?)
so my ipod froze then, and i had the apple icon the whole time on the screen, so i tried everything, i get so frustrated with the ipod that i just want to throw it out the window. i read some things about the problem on the suppoort page, i reset it about a hundred times.. and finally it started working when i got it into disc mode. Yes i got all happy.. I press the restore buttons in itunes.. and this is what happens.. the ( i dont know how to call it) scroll bar? well the green bar that moves to show that its 'restoring' it freezes in the middle of the process, i uninstalled itunes 10 times.. i even tried restoring on 2 other computers, on one of them it does the same thing and on the other theres some other problem.
PLEASE HELP ME!! I DONT know what to do.
ipod 5th gen 30gb Windows XP

____________________16.06V16, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskApple__iPod___________1.62, Bus Type USB
Universal Serial Bus Controllers:
Otwarty kontroler hosta PCI do USB SiS 7001, Magistrala PCI 0, urządzenie 2, funkcja 2. Device is working properly.
No IEEE 1394 Host Controller found.
The last connected iPod serial number: ****.
The iPod Service Logging Information:
[SERVICE: 0xB20,22:06:21 INFO] Started C:\Program Files\iPod\bin\iPodService.exe (Mon Nov 20 22:06:21 2006)
[SERVICE: 0xB20,22:06:21 INFO] ##### iPodService starting as a service, version: 7.0.2.16
[SERVICE: 0xB2C,22:06:22 INFO] Timed out... Starting device manager!
[SERVICE: 0xB54,22:06:22 INFO] Listener Window created
[SERVICE: 0xB54,22:07:32 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:07:32 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:07:32 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:07:34 INFO] [InterfaceArrival] \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB54,22:07:34 INFO] device \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB54,22:07:34 INFO] device is an iPod
[SERVICE: 0xB54,22:07:34 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xB54,22:07:34 INFO] [-1] set waiting to mount = 1
[SERVICE: 0xB54,22:07:34 INFO] [1] Assigning session 0
[SERVICE: 0xB54,22:07:34 INFO] [1] added device interface "\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_objDeviceNameMap
[SERVICE: 0xB54,22:07:34 INFO] [1] added state machine 1 to m_objDeviceIdMap
[SERVICE: 0xB54,22:07:34 INFO] [1] added device number 1 to m_objDeviceNumberMap
[SERVICE: 0xB54,22:07:34 INFO] [1] added device interface "\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_vctDeviceInterfaces
[SERVICE: 0xB54,22:07:34 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:07:34 INFO] [1] input #0 from src #0
[SERVICE: 0xB44,22:07:34 INFO] [1] input #0
[SERVICE: 0xB44,22:07:34 INFO] [MACHINE 1 INPUT #0] - (HDW) CheckDevNode
[SERVICE: 0xB44,22:07:34 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:07:38 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:07:38 INFO] [1] input #1 from src #0
[SERVICE: 0xB48,22:07:38 INFO] [1] input #1
[SERVICE: 0xB48,22:07:38 INFO] [MACHINE 1 INPUT #1] - (HDW) CheckDevNode
[SERVICE: 0xB48,22:07:38 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:07:39 INFO] [SIMULATED VOLUME ARRIVAL] generating volume mount for \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB54,22:07:39 INFO] [VolumeArrive] mask = 0x7D
[SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\.\G:
[SERVICE: 0xB54,22:07:39 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0xB54,22:07:39 INFO] iTunes device #1 found with drive letter G, mask 0x40
[SERVICE: 0xB54,22:07:39 INFO] [1] set waiting to mount = 0
[SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\.\F:
[SERVICE: 0xB54,22:07:39 INFO] type 0x2 drive 0x1 partition 0xffffffff
[SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\.\E:
[SERVICE: 0xB54,22:07:39 INFO] type 0x2 drive 0x0 partition 0xffffffff
[SERVICE: 0xB54,22:07:39 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB54,22:07:39 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\.\D:
[SERVICE: 0xB54,22:07:39 INFO] type 0x7 drive 0x0 partition 0x2
[SERVICE: 0xB54,22:07:39 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB54,22:07:39 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xB54,22:07:47 INFO] [VolumeArrive] mask = 0x40
[SERVICE: 0xB54,22:07:47 INFO] looking up device # for \\.\G:
[SERVICE: 0xB54,22:07:47 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0xB54,22:07:47 INFO] iTunes device #1 found with drive letter G, mask 0x40
[SERVICE: 0xB54,22:07:47 INFO] [1] set waiting to mount = 0
[SERVICE: 0xB54,22:07:47 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:07:47 INFO] [1] input #2 from src #0
[SERVICE: 0xB4C,22:07:47 INFO] [1] input #2
[SERVICE: 0xB4C,22:07:47 INFO] [MACHINE 1 INPUT #2] - (HDW) CheckDevNode
[SERVICE: 0xB4C,22:07:47 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB50,22:07:51 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB50,22:07:51 INFO] [First Connect] Creating connect event for device 1
[SERVICE: 0xB50,22:07:51 INFO] [1] set waiting to mount = 1
[SERVICE: 0xB50,22:07:51 INFO] [1] input #3 from src #0
[SERVICE: 0xB44,22:07:51 INFO] [1] input #3
[SERVICE: 0xB44,22:07:51 INFO] [MACHINE 1 INPUT #3] - (HDW) Interface Arrival
[SERVICE: 0xB44,22:07:51 INFO] [1] progress state is 2, Waiting to mount = 1
[SERVICE: 0xB44,22:07:51 INFO] [1] progress is now 2
[SERVICE: 0xB44,22:07:51 INFO] [1] progress is now 2
[SERVICE: 0xB44,22:07:51 INFO] [MACHINE 1 TRANSITION] - {Unknown} ==> {Connected}
[SERVICE: 0xB44,22:07:51 INFO] [MACHINE 1 ACTIONS] - {Connected}
[SERVICE: 0xB44,22:07:51 INFO] [1] SCSI Inquiry attempt #0
[SERVICE: 0xB50,22:07:52 INFO] [First Connect] Creating mount event for device 1
[SERVICE: 0xB50,22:07:52 INFO] [VolumeArrive] mask = 0x7D
[SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\.\G:
[SERVICE: 0xB50,22:07:52 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0xB50,22:07:52 INFO] iTunes device #1 found with drive letter G, mask 0x40
[SERVICE: 0xB50,22:07:52 INFO] [1] set waiting to mount = 0
[SERVICE: 0xB50,22:07:52 INFO] [1] input #4 from src #0
[SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\.\F:
[SERVICE: 0xB50,22:07:52 INFO] type 0x2 drive 0x1 partition 0xffffffff
[SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\.\E:
[SERVICE: 0xB50,22:07:52 INFO] type 0x2 drive 0x0 partition 0xffffffff
[SERVICE: 0xB50,22:07:52 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB50,22:07:52 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\.\D:
[SERVICE: 0xB50,22:07:52 INFO] type 0x7 drive 0x0 partition 0x2
[SERVICE: 0xB50,22:07:52 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB50,22:07:52 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xB44,22:07:53 INFO] VendorId: Apple
[SERVICE: 0xB44,22:07:53 INFO] ProductId: iPod
[SERVICE: 0xB44,22:07:53 INFO] revision: 1.62
[SERVICE: 0xB44,22:07:53 INFO] vendor bytes:
[SERVICE: 0xB44,22:07:53 INFO] 02 01 00 00 00 00 00 00 00 0B 00 11 91 00 00 00 00 00 00 00
[SERVICE: 0xB44,22:07:53 INFO] [1] firmware version: 1.62 (0x13E)
[SERVICE: 0xB44,22:07:53 INFO] [1] Power State: Powered
[SERVICE: 0xB44,22:07:53 INFO] [1] Checkpoint attempt #0
[SERVICE: 0xB44,22:08:01 ERROR] Did not find first letter of stage
[SERVICE: 0xB44,22:08:01 INFO] got HotPlugState 0
[SERVICE: 0xB44,22:08:01 INFO] [1] serial number 000A270015BEEE43
[SERVICE: 0xB44,22:08:01 INFO] [1] *** CONNECTED - Sending event out, device session 0.
[SERVICE: 0xB44,22:08:01 INFO] [1] input #4
[SERVICE: 0xB44,22:08:01 INFO] [MACHINE 1 INPUT #4] - (HDW) Volume Mount
[SERVICE: 0xB44,22:08:01 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Mounted}
[SERVICE: 0xB44,22:08:01 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB44,22:08:01 INFO] [MACHINE 1 ACTIONS] - {Mounted}
[SERVICE: 0xB44,22:08:01 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0xB44,22:08:01 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0xB44,22:08:13 ERROR] Did not find first letter of stage
[SERVICE: 0xB44,22:08:13 INFO] got HotPlugState 0
[SERVICE: 0xB44,22:08:17 INFO] [1] GetVolumeInformation() failed with error 1005
[SERVICE: 0xB44,22:08:17 INFO] [1] ===== iPod with Video =====
[SERVICE: 0xB44,22:08:17 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0xB44,22:08:17 INFO] [1] iPod needs formatting...
[SERVICE: 0xB44,22:08:17 INFO] 22:8:17, year 2006, day of yr. 323, GMT offset 4 isDST 0
[SERVICE: 0xB44,22:08:17 INFO] [1] Perform launch updater check.
[SERVICE: 0xB44,22:08:17 INFO] [1] iTunes located at 'D:\iTunes.exe'
[SERVICE: 0xB44,22:08:17 INFO] [1] progress is now 0
[SERVICE: 0xB44,22:08:17 INFO] [1] *** MOUNT FAILED - Non-FAT32 device, device session 0
[SERVICE: 0xB34,22:08:57 INFO] <0x4> Got Serial #
[SERVICE: 0xBD0,22:09:01 INFO] [1] GetVolumeInformation() failed with error 1005
[SERVICE: 0xBD0,22:09:01 INFO] <0x4> GetFormatType() returned unknown format 4
[SERVICE: 0xBD0,22:09:01 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xD04,22:09:01 INFO] Mounted
[SERVICE: 0xD04,22:09:01 INFO] [1] already mounted!
[SERVICE: 0xD04,22:09:01 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0xB34,22:09:03 ERROR] ERROR, mount lock count is 0 but device is not mounted
[SERVICE: 0xBD0,22:09:07 INFO] [1] GetVolumeInformation() failed with error 1005
[SERVICE: 0xBD0,22:09:07 INFO] <0x4> GetFormatType() returned unknown format 4
[SERVICE: 0xBD0,22:09:16 INFO] <0x1> Got Serial #
[SERVICE: 0xB34,22:09:16 INFO] <0x1> Got Serial #
[SERVICE: 0xB34,22:09:20 INFO] [1] GetVolumeInformation() failed with error 1005
[SERVICE: 0xB34,22:09:20 INFO] <0x1> GetFormatType() returned unknown format 4
[SERVICE: 0xBD0,22:09:22 INFO] <0x1> Got Serial #
[SERVICE: 0xBD0,22:09:22 INFO] API is now LOCKED!!!
[SERVICE: 0xB54,22:11:15 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:11:15 INFO] [1] input #5 from src #0
[SERVICE: 0xB48,22:11:15 INFO] [1] input #5
[SERVICE: 0xB48,22:11:15 INFO] [MACHINE 1 INPUT #5] - (HDW) CheckDevNode
[SERVICE: 0xB48,22:11:15 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:12:22 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:12:22 INFO] [1] input #6 from src #0
[SERVICE: 0xB4C,22:12:22 INFO] [1] input #6
[SERVICE: 0xB54,22:12:22 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:12:22 INFO] [1] input #7 from src #0
[SERVICE: 0xB44,22:12:22 INFO] [1] input #7
[SERVICE: 0xB4C,22:12:22 INFO] [MACHINE 1 INPUT #6] - (HDW) CheckDevNode
[SERVICE: 0xB4C,22:12:22 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB44,22:12:22 INFO] [MACHINE 1 INPUT #7] - (HDW) CheckDevNode
[SERVICE: 0xB44,22:12:22 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:18:13 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:18:13 INFO] [1] input #8 from src #0
[SERVICE: 0xB48,22:18:13 INFO] [1] input #8
[SERVICE: 0xB48,22:18:13 INFO] [MACHINE 1 INPUT #8] - (HDW) CheckDevNode
[SERVICE: 0xB48,22:18:14 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:21:48 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:21:48 INFO] [1] input #9 from src #0
[SERVICE: 0xB4C,22:21:48 INFO] [1] input #9
[SERVICE: 0xB54,22:21:48 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:21:48 INFO] [1] input #10 from src #0
[SERVICE: 0xB44,22:21:48 INFO] [1] input #10
[SERVICE: 0xB4C,22:21:48 INFO] [MACHINE 1 INPUT #9] - (HDW) CheckDevNode
[SERVICE: 0xB4C,22:21:48 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB44,22:21:48 INFO] [MACHINE 1 INPUT #10] - (HDW) CheckDevNode
[SERVICE: 0xB44,22:21:48 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:44:23 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:44:23 INFO] [1] input #11 from src #0
[SERVICE: 0xB48,22:44:23 INFO] [1] input #11
[SERVICE: 0xB48,22:44:24 INFO] [MACHINE 1 INPUT #11] - (HDW) CheckDevNode
[SERVICE: 0xB48,22:44:24 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:52:27 INFO] [VolumeRemoved] existing mask 0x40, arrive mask 0x20
[SERVICE: 0xB54,22:52:47 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:52:47 INFO] [1] input #12 from src #0
[SERVICE: 0xB4C,22:52:47 INFO] [1] input #12
[SERVICE: 0xB54,22:52:47 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:52:47 INFO] [1] input #13 from src #0
[SERVICE: 0xB44,22:52:47 INFO] [1] input #13
[SERVICE: 0xB4C,22:52:47 INFO] [MACHINE 1 INPUT #12] - (HDW) CheckDevNode
[SERVICE: 0xB4C,22:52:48 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB44,22:52:48 INFO] [MACHINE 1 INPUT #13] - (HDW) CheckDevNode
[SERVICE: 0xB44,22:52:48 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:52:49 INFO] [VolumeArrive] mask = 0x20
[SERVICE: 0xB54,22:52:49 INFO] looking up device # for \\.\F:
[SERVICE: 0xB54,22:52:49 INFO] type 0x2 drive 0x1 partition 0xffffffff
Windows XP
well i clicked help.. and that didnt do anything either.. ;/

Please Help! Two problems with my iMac at once a week b/4 finals!!!!

First I'd just like to mention that I have no idea which OS X I have so...yeah, sorry. I was depending on this computer to work for my class finals. Anyway, on with the problems.
My school is getting all new computers next year, so they are selling all of their iMacs for ten dollars each. Like an idiot, I bought one. And...so did my brother. But anyway, I got it home and started it up and all that came up was the traditional BIIINNNNGGGG, a white screen(for a second), then a gray one. This little icon comes up in the middle that you can't click on(the cursor doesn't come up)but it's purple and has a little cartoon face on it. This icon only comes up if you are not pressing any keys or click/moving the mouse.
So I went back to school the next day and asked what was up, and they said that they completely wiped the computer and that I would have to buy new OS X install software. Okay...so I went to my computer teacher and he had a few sets of OS X install software.
I brought it home and turned on my computer. I put in the disk that said OS X Install and it went in. The computer whirred for a bit, then spit the disk back out. So I decided to try a different disk because I thought that maybe the computer already had the contents of that disk on it. I put in the Applications disk, and now it refuses to come out. I have tried plugging the keyboard into different ports(there are two, with two others on the keyboard itself for the mouse) and everything. I looked inside through the little slot(discs go right into the computer-no hard drive or disk tray that slides out) on the front and the disc is spinning but nothing is happening.
Please help me with both my wiped computer problem and my stuck disc problem. I have tried to give as much detail to help anyone who can help me. Please, WHAT CAN I DO?!
iMac Mac OS X (10.0.x) I have an OS X. No idea which one...
iMac Mac OS X (10.0.x) I have an OS X. No idea which one...
iMac Mac OS X (10.0.x) I have an OS X. No idea which one...

The full retail install disks are available here and at any Apple Store and many computer retailers. Also, check the system requirements. Be sure your Mac has firewire and enough ram to run Tiger. At this point you might be able to find the disks at a slightly discounted price because of the coming release of 10.5 Leopard. But be sure it is the black disk, boxed version if possible.
EDIT: And the install disc for Tiger is a DVD, so be sure your iMac has DVD.
This may help to narrow down the model iMac you have.
-mj
[email protected]
Message was edited by: macjack

Please help...Problem with 3D Applet using JRE 1.5

Hi all,
I have an applet which uses sun opengl 1.3.1 plugin to render some 3D graphics. It is working fine with JRE 1.4.2_06, but not showing the 3D graphics with the latest JRE 1.5 release. I tried to repaint using available API with no success.
Please help asap,
Thanks in advance
prasad

I wonder if you have the same problem as me... Maybe we can find a solution for us both, no need for me to open a new thread for this topic then...
I wrote an applet using Swing and compiled it using JavaSDK 1.4.x. I also installed the 1.4.x JRE for both of my test browsers. In Mozilla 1.1 the applet displays properly all the time. In IE6 SP1 it sometimes works as intended but sometimes the applet simply stops working, as per my Java Console somewhere after invoking the "start" method. Parts of the applet simply become gray and when I resize it - I have a JFrame in my applet - the whole JFrame becomes gray and does not respond to input nor it redraws itself. Shutting down IE does not close the JFrame(although the java console reports normal program termination and cleanup) and the only way to close it is through the task manager. I am using Windows 98SE btw.
Does it sound similiar to your problem? It happens ONLY with IE, not with Mozilla. Anybody has an idea on what it could be? I doubt there's an error in my code...

PLEASE HELP i have trouble with WRT54G port forwarding with linksys

Hello guys, i play a game called populous, and since im on a router i cannot host the game, when i used to have a d-link all i would do is have to set up the port to my ip with the udp. but ever since i have swiched to linksys that doesnt work, the ip on my portforwaring is the same as the one on my computer the port is correct and the udp is set, i also have no fire walls on and it still doesnt make a differance, Someone in the game suggested that there is a local ip i need to get? is that true or is there another setting i need to set up in my router page?
PLEASE HELP IF YOU CAN <3<3 thanks
Message Edited by Curtman on 09-07-2007 12:04 PM

Yes that happens if you write replies to your own posts. Many regulars here only answer their "own" topics (i.e. to which they have answered before) and new ones which don't have replies, yet. If you write a reply to your own topic chances are your are not read unless during some random browsing...
Regarding your problem it is impossible to say anything unless you give the exact settings you have on your router. Please post the full settings you have for port forwardings, port triggering and DMZ. If you have UPnP forwarding in your router (I don't think you have) post those settings, too.
Otherwise I suggest this checklist for troubleshooting port forwardings.

Please Help?! Problems with Viber for iPhone 4s

Please help!
I have had problems with Viber for a while now and had given up! But now a few contacts only have viber and not other free messaging apps so I’m trying to use it again but still having problems.
I have uninstalled and reinstalled a number of times and still have not received an access code. My main problem though is the messaging it would work fine and then I wouldn’t be able to send any messages and I would receive a message go into the app and the message would not appear.
The other day I reinstalled it whilst at work and worked perfectly could send and receive messages easily. Then when I went home the problem stated again. I then uninstalled and reinstalled again and it worked perfectly, but now back at work I’m having the issues again! I can’t keep uninstalling and reinstalling is there a way this can be fixed?!
If anyone is able to help me out it would be much appreciated! Thanks

You activated "Find My Mac," which disables the built-in Guest account and adds a Safari-only "Guest User" pseudo-account. To get the Guest account back, you would have to disable FMM.

Please help! Strange problem with HTTPD.Conf and OC4J (I think)

Hi,
We have been trying to configure the 10g "infrastructure" Apache server/instance to work with our own authentication module, and as part of this, we need to configure a directory alias containing some of our JSPs. To do this, the only thing that we did was that we took the standard HTTPD.CONF file that got installed with the 10g AS installation, and added a small section at the end.
However, we are finding that if our addition to the HTTPD.CONF is included, instead of the JSPs in our aliased directory being processed, Apache seems to be just serving the JSPs as text pages :(..
If we remove the section at the end of the HTTPD.CONF, and point a browser to the unaliased path, the JSPs get processed correctly.
I was wondering if anyone here might take a look at our HTTPD.CONF below, and tell me if you can see something there that might be causing this behavior? The section that we added is at the very end. We think that the problem might be something like the "order" of the directives, etc. in the HTTPD.CONF file may be such that the alias is taking priority ahead of the OC4J, or something like that.
Thanks in advance, and apologies for the long message.
Jim
=====================================================
ServerType standalone
ServerRoot "/orad59/10gAS/infrastructure/Apache/Apache"
PidFile /orad59/10gAS/infrastructure/Apache/Apache/logs/httpd.pid
ScoreBoardFile /orad59/10gAS/infrastructure/Apache/Apache/logs/httpd.scoreboard
Timeout 300
KeepAlive On
MaxKeepAliveRequests 100
KeepAliveTimeout 15
MinSpareServers 5
MaxSpareServers 20
StartServers 5
MaxClients 150
MaxRequestsPerChild 0
LoadModule onsint_module libexec/mod_onsint.so
LoadModule mmap_static_module libexec/mod_mmap_static.so
LoadModule vhost_alias_module libexec/mod_vhost_alias.so
LoadModule env_module libexec/mod_env.so
LoadModule define_module libexec/mod_define.so
LoadModule config_log_module libexec/mod_log_config.so
LoadModule agent_log_module libexec/mod_log_agent.so
LoadModule referer_log_module libexec/mod_log_referer.so
LoadModule mime_magic_module libexec/mod_mime_magic.so
LoadModule mime_module libexec/mod_mime.so
LoadModule negotiation_module libexec/mod_negotiation.so
LoadModule status_module libexec/mod_status.so
LoadModule info_module libexec/mod_info.so
LoadModule includes_module libexec/mod_include.so
LoadModule autoindex_module libexec/mod_autoindex.so
LoadModule dir_module libexec/mod_dir.so
LoadModule cgi_module libexec/mod_cgi.so
LoadModule asis_module libexec/mod_asis.so
LoadModule imap_module libexec/mod_imap.so
LoadModule action_module libexec/mod_actions.so
LoadModule speling_module libexec/mod_speling.so
LoadModule userdir_module libexec/mod_userdir.so
LoadModule alias_module libexec/mod_alias.so
LoadModule access_module libexec/mod_access.so
LoadModule auth_module libexec/mod_auth.so
LoadModule anon_auth_module libexec/mod_auth_anon.so
LoadModule dbm_auth_module libexec/mod_auth_dbm.so
LoadModule digest_module libexec/mod_digest.so
LoadModule proxy_module libexec/libproxy.so
LoadModule cern_meta_module libexec/mod_cern_meta.so
LoadModule expires_module libexec/mod_expires.so
LoadModule headers_module libexec/mod_headers.so
LoadModule usertrack_module libexec/mod_usertrack.so
LoadModule unique_id_module libexec/mod_unique_id.so
LoadModule setenvif_module libexec/mod_setenvif.so
LoadModule perl_module libexec/libperl.so
LoadModule fastcgi_module libexec/mod_fastcgi.so
<IfDefine SSL>
LoadModule ossl_module libexec/mod_ossl.so
</IfDefine>
LoadModule wchandshake_module libexec/mod_wchandshake.so
ExtendedStatus On
Port 7777
Listen 7777
User oracle
Group dba
ServerAdmin [email protected]
ServerName ge1ssd04.test.com
DocumentRoot "/orad59/10gAS/infrastructure/Apache/Apache/htdocs"
<Directory />
Options FollowSymLinks MultiViews
AllowOverride None
</Directory>
<Directory "/orad59/10gAS/infrastructure/Apache/Apache/htdocs">
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
<IfModule mod_userdir.c>
UserDir public_html
</IfModule>
<IfModule mod_dir.c>
DirectoryIndex index.html
</IfModule>
AccessFileName .htaccess
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
UseCanonicalName On
<IfModule mod_mime.c>
TypesConfig /orad59/10gAS/infrastructure/Apache/Apache/conf/mime.types
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
AddLanguage ar .ar
AddLanguage da .dk .da
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .ee
AddLanguage fi .fi
AddLanguage fr .fr
AddLanguage de .de
AddLanguage el .el
AddLanguage es .es_ES .es
AddLanguage he .he .iw
AddLanguage hu .hu
AddCharset ISO-8859-8 .iso8859-8
AddLanguage it .it
AddLanguage ja .ja
AddCharset ISO-2022-JP .jis
AddLanguage ko .ko
AddLanguage kr .kr
AddCharset ISO-2022-KR .iso-kr
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddCharset ISO-8859-2 .iso-pl
AddLanguage pt .pt
AddLanguage pt-br .pt_BR .pt-br
AddLanguage ltz .lu
AddLanguage ca .ca
AddLanguage sk .sk
AddLanguage sv .sv
AddLanguage th .th
AddLanguage tr .tr
AddLanguage cz .cz .cs
AddLanguage ro .ro
AddLanguage ru .ru
AddLanguage zh-cn .zh_CN
AddLanguage zh-tw .zh_TW
AddCharset Big5 .Big5 .big5
AddCharset WINDOWS-1251 .cp-1251
AddCharset CP866 .cp866
AddCharset ISO-8859-5 .iso-ru
AddCharset KOI8-R .koi8-r
AddCharset UCS-2 .ucs2
AddCharset UCS-4 .ucs4
AddCharset UTF-8 .utf8
<IfModule mod_negotiation.c>
LanguagePriority ar en da nl et fi fr de el it ja ko kr no pl pt pt-br ro ru ltz ca es sk sv th tr zh-cn zh-tw zh-cn
</IfModule>
AddType application/x-tar .tgz
</IfModule>
DefaultType text/plain
<IfModule mod_mime_magic.c>
MIMEMagicFile /orad59/10gAS/infrastructure/Apache/Apache/conf/magic
</IfModule>
HostnameLookups Off
ErrorLog "|/orad59/10gAS/infrastructure/Apache/Apache/bin/rotatelogs /orad59/10gAS/infrastructure/Apache/Apache/logs/error_log 43200"
LogLevel warn
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
CustomLog "|/orad59/10gAS/infrastructure/Apache/Apache/bin/rotatelogs /orad59/10gAS/infrastructure/Apache/Apache/logs/access_log 43200" common
ServerSignature On
<IfModule mod_alias.c>
Alias /icons/ "/orad59/10gAS/infrastructure/Apache/Apache/icons/"
Alias /jservdocs/ "/orad59/10gAS/infrastructure/Apache/Jserv/docs/"
Alias /javacachedocs/ "/orad59/10gAS/infrastructure/javacache/javadoc/"
<IfModule mod_perl.c>
Alias /perl/ "/orad59/10gAS/infrastructure/Apache/Apache/cgi-bin/"
</IfModule>
<Directory "/orad59/10gAS/infrastructure/Apache/Apache/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
ScriptAlias /cgi-bin/ "/orad59/10gAS/infrastructure/Apache/Apache/cgi-bin/"
<Directory "/orad59/10gAS/infrastructure/Apache/Apache/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
</IfModule>
<IfModule mod_autoindex.c>
IndexOptions FancyIndexing
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
ReadmeName README
HeaderName HEADER
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
</IfModule>
<IfModule mod_setenvif.c>
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
</IfModule>
<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from localhost ge1ssd04.test.com ge1ssd04
</Location>
SetEnv PERL5LIB "/orad59/10gAS/infrastructure/perl/lib/5.6.1:/orad59/10gAS/infrastructure/perl/lib/site_perl/5.6.1"
<IfModule mod_perl.c>
PerlModule Apache
PerlModule Apache::Registry
<Location /perl>
SetHandler perl-script
PerlHandler Apache::Registry
AddHandler perl-script .pl
Options +ExecCGI
PerlSendHeader On
</Location>
</IfModule>
<DirectoryMatch /WEB-INF/>
Order deny,allow
Deny from all
</DirectoryMatch>
<IfModule mod_fastcgi.c>
Alias /fastcgi/ "/orad59/10gAS/infrastructure/Apache/fastcgi/"
ScriptAlias /fcgi-bin/ "/orad59/10gAS/infrastructure/Apache/Apache/fcgi-bin/"
<Directory "/orad59/10gAS/infrastructure/Apache/Apache/fcgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
SetHandler fastcgi-script
<IfModule mod_ossl.c>
SSLOptions +StdEnvVars
</IfModule>
</Directory>
</IfModule>
PassEnv ORACLE_HOME
PassEnv LD_LIBRARY_PATH
PassEnv NLS_LANG
PassEnv TNS_ADMIN
<IfModule mod_oprocmgr.c>
<Location /oprocmgr-service>
SetHandler oprocmgr-service
Order deny,allow
Deny from all
Allow from localhost ge1ssd04.test.com ge1ssd04
</Location>
<Location /oprocmgr-status>
SetHandler oprocmgr-status
Order deny,allow
Deny from all
Allow from localhost ge1ssd04.test.com ge1ssd04
</Location>
</IfModule>
include "/orad59/10gAS/infrastructure/Apache/Apache/conf/mod_oc4j.conf"
include "/orad59/10gAS/infrastructure/Apache/Apache/conf/dms.conf"
LoadModule rewrite_module libexec/mod_rewrite.so
include "/orad59/10gAS/infrastructure/Apache/Apache/conf/ssl.conf"
include "/orad59/10gAS/infrastructure/Apache/Apache/conf/mod_osso.conf"
include "/orad59/10gAS/infrastructure/Apache/Apache/conf/oracle_apache.conf"
# MY ADDITIONS TO HTTPD.CONF GO BELOW HERE....
LoadModule my_auth_module /opt/myagent/apache/lib/libmy_apache_agent_mod_ssl.so
AddModule my_apache_mod.c
<IfModule my_apache_mod.c>
MYAgentRoot /opt/myagent/apache
</IfModule>
<IfModule my_apache_mod.c>
<Location />
AuthType Basic
Require valid-user
AuthName MYAUTH
</Location>
</IfModule>
<IfModule my_apache_mod.c>
Alias /mydir/ "/orad59/10gAS/infrastructure/j2ee/OC4J_SECURITY/applications/sso/web/jsp/myagentdir/"
<Directory "/orad59/10gAS/infrastructure/j2ee/OC4J_SECURITY/applications/sso/web/jsp/myagentdir/">
AuthType Basic
Require valid-user
AuthName MYAUTH
</Directory>
</IfModule>

Hi,
I wanted to post what we found on this.
As indicated in my original msg, we had an Alias directory in the httpd.conf. However, after thinking about the problem a bit, I think that the Alias was not the right thing to do.
The Alias tells Apache to map a URL fragment to a FILESYSTEM location. Well, obviously, Apache only SERVES pages... it doesn't process JSPs.
We switched to using a Redirect directive instead of the Alias, and things worked a little better, but we've run into a bit of a problem with "Redirect looping", but that's a different story :)...
Jim

Please help!! problem with rebooting lumia 820

I only got my Lumia 820 yesterday and it was fine then today the camera stopped working, i tried taking the battery out, and putting it back in then switching it back on - still no luck. Then i went on the nokia website and looked up the troubleshooting advice where it advised a reboot. I tried the reboot, seemed to be going fine but now it wont switch on properly!! when it gets to the switching back on part of the reboot it vibrates then the nokia logo comes up on the screen but stays like that and nothing else happens!! please help, really dont know what to do!
p.s i stay an hour away from the nearest phone shop otherwise i'd have popped in when it was just the camera not working!

If you tried the advice from guide return it back to point of purchase and get it exchanged.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

PLEASE help ...problems with Safari after OSX 10.4.11

I am so , so frustrated. After trying to install the new osx, my safari will not open. A pop on the deck and nothing. I could not install the update either. I got an error message. I tried to reinstall 10.4.11 and still error.
I don't know much about my computer so please be very explicit...
I tried to call the tech support, but of course my 1 year expired and they will not talk until they get $$. Well I find that this is crap, since it seems after reading the postings that this is their doing. Anyway I ruined my Thanksgiving...CAN SOMEONE PLEASE HELP. I tried to read the posts, but not sure how to apply.
THANK YOU!
Is it any fix utility on mac..have no clue.

Here is what I did so far.
*1.I have Fire Fox, which works great.*
*2. I did a disk check and some error showed up...but would not give me the option to repair disk...see below*
Verifying volume “ ”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid node structure_
The volume needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
If someoane can make sense of this and tell me how to repair would be great.
*3. I also did permission repair twice and restart, but safari still not working*
*4. Here is the summary from console:*
Mac OS X Version 10.4.10 (Build 8R2218)
2007-11-26 07:13:26 -0500
2007-11-26 07:13:27.423 SystemUIServer[369] lang is:en
dyld: Symbol not found: _WebIconDatabaseImportDirectoryDefaultsKey
Referenced from: /Applications/Safari.app/Contents/MacOS/Safari
Expected in: /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
Nov 26 07:14:49 irina-prelipceans-computer crashdump[382]: Safari crashed
Nov 26 07:14:49 irina-prelipceans-computer crashdump[382]: crash report written to: /Users/irina/Library/Logs/CrashReporter/Safari.crash.log
dyld: Symbol not found: _WebIconDatabaseImportDirectoryDefaultsKey
Referenced from: /Applications/Safari.app/Contents/MacOS/Safari
Expected in: /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
Nov 26 07:16:31 irina-prelipceans-computer crashdump[388]: Safari crashed
Nov 26 07:16:31 irina-prelipceans-computer crashdump[388]: crash report written to: /Users/irina/Library/Logs/CrashReporter/Safari.crash.log
dyld: Symbol not found: _WebIconDatabaseImportDirectoryDefaultsKey
Referenced from: /Applications/Safari.app/Contents/MacOS/Safari
Expected in: /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
Nov 26 07:18:15 irina-prelipceans-computer crashdump[391]: Safari crashed
Nov 26 07:18:15 irina-prelipceans-computer crashdump[391]: crash report written to: /Users/irina/Library/Logs/CrashReporter/Safari.crash.log
Nov 26 19:54:58 irina-prelipceans-computer kextd[402]: a link/load error occured for kernel extension /System/Library/Extensions/LexarFilterScheme.kext
2007-11-26 19:55:31.526 DiskImages UI Agent[421] Could not find image named 'background'.
2007-11-26 19:57:01.042 Finder[370] CFLog (21): dyld returns 2 when trying to load /Library/Contextual Menu Items/TI Connect X Menu Plugin.plugin/Contents/MacOS/TI Connect X Menu Plugin
2007-11-26 19:57:01.042 Finder[370] CFLog (22): Cannot find function pointer TIConnectManagerXCMPlugInFactory for factory EE9E0B23-6067-11D7-8827-003065ABFF44 in CFBundle/CFPlugIn 0x14ab4bb0 </Library/Contextual Menu Items/TI Connect X Menu Plugin.plugin> (bundle, not loaded)
### MRJPlugin: getPluginBundle() here. ###
### MRJPlugin: CFBundleGetBundleWithIdentifier() succeeded. ###
### MRJPlugin: CFURLGetFSRef() succeeded. ###
2007-11-26 20:10:14.544 Console[450] CFLog (21): dyld returns 2 when trying to load /Library/Contextual Menu Items/TI Connect X Menu Plugin.plugin/Contents/MacOS/TI Connect X Menu Plugin
2007-11-26 20:10:14.545 Console[450] CFLog (22): Cannot find function pointer TIConnectManagerXCMPlugInFactory for factory EE9E0B23-6067-11D7-8827-003065ABFF44 in CFBundle/CFPlugIn 0x3bc660 </Library/Contextual Menu Items/TI Connect X Menu Plugin.plugin> (bundle, not loaded)
*5. Have not downloaded the 10.4.11 combo yet. Not sure if I have to trash safari first or not.*
I WANT TO THANK YOU FOR ALL THE HELP!!!!

Please Help - Very strange problem with internal String encoding

I created a file in one-byte russian encoding cp1251 and declared String literal with 2 letters:
String str = "ab"; //attention! ab - two russian characters
After I got bytes from it - str.getBytes("cp1251") - it returned 2 byte's array.
Now I created a file with UTF-8 encoding with equal content and suddenly:
After I got bytes from it - str.getBytes("cp1251") - it returned 4! byte's array. Why?
I need to get a one-byte encoded arrays (cp1251 or koi8-r) but getBytes ALWAYS returns two-byte encoded arrays.
It is very strange: cp1251 is always one-byte encoded, but .getBytes("cp1251") returns two-byte on each letter. Why? Please help.

I did not read a string from a file. I created 2 .java files with different encodings (cp1251 and UTF-8) and compiled them, telling compiler with -Dfile.encoding=*** to read them correctly. While execution java interprets two looking equal in editor strings as different objects with different .intern() representation.
Why java consider source .java file encoding while creating internal representation of String object and creates from looking equally in editor strings two DIFFERENT Unicode representations. And it is impossible to convert one representation to other - impossible to get two equal byte[] arrays.

Please help me! showInputDialog with specific Buttons

Hi all,
I'm from Germany and have some trouble with the JOptionPane package.
Everything works fine, but I have a german operationsystem and i'm writing an 1.4 application in english.
If I use a Optiondialog i can create my own buttontexts.
String[] options = { "Yes", "No" };
int n = JOptionPane.showOptionDialog(StartScreen.frame,
"Do you really want to quit ?", // Fragetext
"Are you sure ?", // Titel
JOptionPane.YES_NO_OPTION, JOptionPane.QUESTION_MESSAGE, // Icon
null, options, options[0]);
if (n == JOptionPane.YES_OPTION) {
Transfer.closeConnection();
System.exit(0);
That works, but here I see the german buttons, how can I choose specific Buttons here?
String response = (String) JOptionPane.showInputDialog(
          contentpane, // parent
          "Who is your favorite chipmunk?", // message
          "Pick a Chipmunk", // dialog title
          JOptionPane.QUESTION_MESSAGE, // icon type
          null, // no explicit icon
          new String[] {                     // choices
               "Alvin", "Simon", "Theodore"
          "Alvin"); // default choice
Hope anyone can help me.
Thanks

in your main method :
Locale.setDefault(Locale.UK);
Then all default buttons will show in english.

Please help diagnose a problem with Aperture

Hi all,
I've noticed recently that Apertures performance isn't what it should be so came on here looking for reasons why that might be the case. I saw one person suggest making a new account to see how Aperture runs and, as I'd just created an account for my GF I tried logging into her account and to my surprise Aperture was a speed demon!
I have managed to somewhat improve the performance of Aperture by basically removing every login item and running all the maintenance scripts using Onyx but one niggly little problem persists that I can't cure. Namely that of switching out of fullscreen mode. Initially Aperture on my account was dreadful when switching into AND out of fullscreen but now switching into fullscreen is almost instant while switching out of fullscreen I get a pause where I can see both the fullscreen image and the window, this pause lasts for around 5 - 10 seconds before my Mac Pro starts to respond again.
I've noticed that in my account Activity Monitor shows many more processes than under my gf's account but I have no idea which ones might adversely affect Aperture.
I suppose my other option is a wipe/reinstall of the OS but I really didn't want to go down that route tbh.
Any ideas?

OK I've just added another 4Gb of RAM and that hasn't helped any either. I can however be a bit more specific about the problem.
As you know the problem only happens on my (Administrator) login, my newly created account (standard user) doesn't exhibit this nor does my girlfriends (also a standard user account). The problem is specific to switching OUT OF fullscreen mode. The problem also only rears its head when I switch to a new image, once I've gone into and out of fullscreen once with that image it doesn't do it again unless I switch my selection to a different image, it also does it if I switch to another image then back again.
To reiterate the problem is a long pause when switching out of fullscreen mode, it hangs kind of half in half out of fullscreen mode sometimes for up to 15 seconds.
Any help would be greatly appreciated.

Please help... I HAVE PROBLEM WITH MY BUTTONS OF MY NANO (1st gen)

Similar Messages

Maybe you are looking for