PM Order: Get Person Responsible

Hi All.
Does anybody know where the table is where I can find the personnel number and/or personnel name of the person responsible that links to a specific order?
If I have the pernr, I know how to find the employee
in the relevant HR table.
I apppreciate any help.
Sincerely
Ryno

Hi Ryno Boyens ,
<b>1</b>.
Use AUFK-ERNAM field .This is user ID of Who has created ORDER .
<b>2</b>.
Use Infotype table PA0105 (Communications IT).
Get the PERNR from this table like this
Select single PERNR
from PA0105
into l_pernr
where subty = '0001'
  and usrid = AUFK-ERNAM
  and begda le sy-datum
  and endda ge sy-datum.
<b>3</b>.
The below is must.
  and begda le sy-datum
  and endda ge sy-datum.
<b>4</b>.
After getting PERNR from that table get emp name from PA0001
Select single ENAME
from PA0001
into l_ename
where pernr = l_pernr
  and begda le sy-datum
  and endda ge sy-datum.
I think that it helps u .
<b>Thanks
Venkat.O</b>

Similar Messages

  • BAdi / ES in transaction CBIH82 to get Person Responsible

    Hi,
    In transaction CBIH82, I am having a requirement to send a mail to 'Person Responsible' when new entry is created. We can see person responsible by clicking on 'Safety Measure' button. I am using BAdi  - 'BADI_EHSI_IH_POST_COMMIT'. But I am not able to get Person Responsible in it. That BAdi seems to be for the main screen and does not catch data of the subsequent screen. Any idea of any other BAdi / ES which will give me data for 'Edit safety measure'.

    Check these exits:
    EHSIAHM1            EH&S: Menu Exit 1 for Incident/Accident Log Header
    EHSIAHM2            EH&S: Menu Exit 2 for Incident/Accident Log Header
    EHSIAPM1            EH&S: Menu Exit 1 for Incident/Accident Log Person
    EHSIAPM2            EH&S: Menu Exit 2 for Incident/Accident Log Person
    EHSMPHM1            EHS: Menu Exit 1 for Measurement Project Header Data
    EHSMPHM2            EHS: Menu Exit 2 for Measurement Project Header Data
    EHSMPJM1            EHS: Menu Exit 1 for Measurement Project Measurements
    EHSMPJM2            EHS: Menu Exit 2 for Measurement Project Measurements
    EHSSARA             EHS: Check/Edit Lines in SARA List Before Printout
    Reddy
    Edited by: V.V.Reddy on Apr 22, 2010 1:47 PM

  • Person responsible wise maintenance order

    Hi,
    In the maintenance order header screen,we maintain the person responsible (HR employee).
    I need a report to find number of orders per person responsible. I thought it would be available in IW38 but strange could not find.
    Kindly help.
    Regards,
    Smart

    I think you have it there (IW38)
    KJogeswaraRao

  • Person Responsible for Corrective-Preventive action in Audit Management

    Hi,
    I am creating Corrective-Preventive action in audit (PLMD_AUDIT). I am using BAdi PLM_AUDIT_COR_UPDATE. I am getting all other info I need in it but not able to get person responsible (under 'Contact Persons' tab).
    Since the BAdi methods are 'before save' and 'update' we can not fetch from the database also.
    Can anyone help??

    Hi,
    If you want to get the list of CARs linked to audit , you can refer to bapis.
    BAPI_BUS20350_GET_DETAIL - pass the audit external id & guid to get the audit & CAPA details.
    BAPI_BUS20370_GET_DETAIL - pass the CAPA details
    Regards
    Keerthi

  • Fax the Maintenance order to the person responsible to work center

    Hello
    The business requirement is that the maintenance order should be faxed to the person responsible for the main work center used in the maintenance order.
    Please suggest any work around if possible.
    Thanks for your reply.
    Regards
    Santosh

    hello pete,
    the business requirement is that i need to send the work order to the main work center of the order for which the fax no of the main work center will be populate automaticall at the time of or before clicking on print/fax order in iw32, in standard scenerio i can get the fax no from partner function but in this case i do not know how to map it.
    regards,
    Santosh

  • Getting the Person Responsible from Requiremts Assignmts Tab in Service Ord

    Hi,
    I am trying to get the person responsible for a particular operation from the Requiremts Assignmts Tab in Service Order.In the IW32 transaction,in the requirements assignment tab for a particular operation when
    I look at the technica information of the field where the person is assigned, I see that it is on Structure : CYSPLITIN, field: SHORT.
    I need to know the actual database table or link to the operation/activity where I can read the person from in an ABAP program.
    Please find below the SQL trace for your reference.
    Transaction          ?     Work process no                    18     Proc. Type               UP2          Client          100          User          AAAAAAAA          TransGUID          4877F6D607E15917E1000000C0A8D032          Date          12.07.2008
         Duration     Obj. name                    Op.     Recs.               RC     Statement
                 7     VBHDR                    REOPEN                         0     SELECT WHERE "VBKEY" = '4877F6D607E15917E1000000C0A8D032' FOR UPDATE
               697     VBHDR                    FETCH         1                    0
                 6     VBMOD                    REOPEN                         0     SELECT WHERE "VBKEY" = '4877F6D607E15917E1000000C0A8D032' AND "VBRC" <> 0 AND ( "VBMODE" = '2' OR "VBMODE" = '4' OR "VBMODE" = '5' )
               241     VBMOD                    FETCH         3                 1403
                 6     VBDATA                    REOPEN                         0     SELECT WHERE "VBKEY" = '4877F6D607E15917E1000000C0A8D032' AND "VBMODCNT" = 1 AND "VBBLKNO" >= 0 ORDER BY "VBKEY" , "VBMODCNT" , "VBBLKNO"
               233     VBDATA                    FETCH         1                 1403
                 7     TMC2F                    REOPEN                         0     SELECT WHERE "MANDT" = '500' AND "ZEITP" = 'I3' AND "KBTCH" <> ' ' ORDER BY "MANDT" , "ZEITP" , "SUHIE" , "STAFO" , "KBTCH" , "FPROG" , "FROUT"
               363     TMC2F                    FETCH        44                 1403
               496     MCIPMIS                    REEXEC         1                    0     UPDATE SET "STWAE" = 'EUR' , "WAERS" = 'EUR' , "EQUNR" = '000000000003000200' , "BEGRU" = ' ' , "EQTYP" = '1' , "EQART" = ' ' , "INVNR" = ' ' , "ANSDT" = 00000000 , "ELIEF" = ' ' , "HERST" = ' ' , "SERGE" = ...
                 6     VBDATA                    REOPEN                         0     SELECT WHERE "VBKEY" = '4877F6D607E15917E1000000C0A8D032' AND "VBMODCNT" = 2 AND "VBBLKNO" >= 0 ORDER BY "VBKEY" , "VBMODCNT" , "VBBLKNO"
               273     VBDATA                    FETCH         1                 1403
                 8     VBDATA                    REOPEN                         0     SELECT WHERE "VBKEY" = '4877F6D607E15917E1000000C0A8D032' AND "VBMODCNT" = 7 AND "VBBLKNO" >= 0 ORDER BY "VBKEY" , "VBMODCNT" , "VBBLKNO"
               523     VBDATA                    FETCH         1                 1403
               774     VBMOD                    REEXEC         8                    0     DELETE WHERE "VBKEY" = '4877F6D607E15917E1000000C0A8D032'
               476     VBDATA                    REEXEC         8                    0     DELETE WHERE "VBKEY" = '4877F6D607E15917E1000000C0A8D032'
               173     VBHDR                    REEXEC         1                    0     DELETE WHERE "VBKEY" = '4877F6D607E15917E1000000C0A8D032'
               698                         EXECSTA         0                    0     COMMIT WORK ON CONNECTION 0
         Transaction          ST05          Work process no                    0     Proc. Type               DIA          Client          100          User          AAAAAAAA          TransGUID          4877F79907E15917E1000000C0A8D032          Date          12.07.2008
         Duration     Obj. name                    Op.     Recs.               RC     Statement
                10     TFDIR                    REOPEN                         0     SELECT WHERE "FUNCNAME" = 'PERFORMANCE_TRACE_OFF'
               461     TFDIR                    FETCH         1                    0
                 8     TFDIR                    REOPEN                         0     SELECT WHERE "FUNCNAME" = 'SQLT_TRACE_OFF'
               303     TFDIR                    FETCH         1     
                   0
    Regards,
    Sophia Xavier

    Hi Sophie,
    Check if these FMs helps you anyway -   RH_READ_OBJECT or RP_CHECK_PERNR
    I found them in include program - LCOI0F14 . Give a breakpoint in these FMs and check how they are working.
    My system unfortunately dont have any service order ( or i dont know how to see that )
    Cheers
    Kothand
    Edited by: Kothand on Jul 12, 2008 10:19 AM

  • Change the value of order Person Responsible in bapi_alm_order_maintain

    Hi Expert,
    I want to change the value of person responsible in order Tab.  and also i want change Person Responsible for multiple order .
    How can i change ....  please  write code.

    Hi,
    You can use the remodelling here with the option " Replace Characteristics" with Customer exit. It will allow you to write an exit and change the value. Find more here:
    http://www.scribd.com/doc/7882193/Remodeling-in-BI-70-Using-Customer-Exit
    Thanks...
    Shambhu

  • Send SMS to person responsible from a maintenance order

    Hi
    I want to send SMS on the mobile of person responsible for an operation of an order. SMS should contain details for that operation.
    Which exit/Badi is used for this.
    What is the basis for these developments.
    Kindly suggest.
    Thanx
    Ravi

    Ravi,
      Its actually very simple and There are number of ways to accomplish this all from ABAP and it all depends on what is available at the client site.please look up SMS / Email message from SDN  and there are pages of blogs and sample codes.
      From the application side It all depends on when you would be assigning the person responsible for the operation and when do you want to send the message and whether you would like to track the same as well.With the way the operation functionality on the order is setup, it would be easy to capture the trigger when the operation is "released".You could use the change document functionality available on system status change to capture the event. if thats not acceptable, then you would need to use the change document functionality to capture the Assiggnment of the operation and then Base your trigger based on it.
       You could then assign the above event to standard task, which will basically call the  send email function call (Ex: SO_OBJECT_SEND) but instead of the email address enter the entire cell phone number(Basis would have to have configured the SCOT transaction to send email from SAP before this can be done ) . After the message is sent successfully, You would need to also write an update call back to the Order operation to update a user status of the operation indicating that a SMS has been sent.
    Regards
    Narasimhan

  • Person Responsible Table Field

    Hi,
    I need to find a table for "Person Responsible" field maintained in Service Order IW33.
    I need to get the person responsible based upon Order number.
    AUFK-USER2 does not contain any value for AUFK-AUFNR (Order number)
    Suggest the required table.
    Please help!
    Thanks

    Table Name :  VAFILOA
    give the order number in VAFILOA table and pick the INGPR (Planner Group for Customer Service and Plant Maintenance),GEWRK.
    INGPR  description you can find in table  T024I.
    give GEWRK field to OBJID in table CHRD. pick the fields ARBPL,WERKS
    give two fields ARBPL,WERKS in table M_CRAMA pick the discription Mn.wk.ctr
    Regards,
    Kiran  ( HPL )
    Edited by: Kiran HPL on Dec 14, 2009 8:07 AM

  • How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?

    With Acrobat 6.0 I was able to copy a stamp in the same position (I mean "exactly" the same one) of different pages just by using the "copy/past" tool.
    Now I am using Acrobat XI and it seems like it is not possible anymore: I am copying a stamp and I am trying to past it in anoter page, but it appears in the center of the page (or wherever it wants to...).
    Does anyone have a solution?
    Thanks in advance.

    Thank you very much. I'll be waiting for you message.
    Messaggio originale----
    Da: [email protected]
    Data: 26/01/2015 17.56
    A: "Umberto Gangi"<[email protected]>
    Ogg:  How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
        How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
        created by Gilad D (try67) in Creating, Editing &amp; Exporting PDFs - View the full discussion
    Well, I was in the same situation so I've developed a tool that allows one to do it. I will send you some additional information about it in a private message.
         If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7132586#7132586 and clicking ‘Correct’ below the answer
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7132586#7132586
         To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, &amp; "Stop Following"
         Start a new discussion in Creating, Editing &amp; Exporting PDFs by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Creation of person responsible in CR01 (work center creation)

    Hi
    During the creation of work center (CR01). The following details are entered before i get the error message
    1) Work  center and its description
    2)Work center category
    3)Usage
    4)Backflush
    5)Standard value key
    But  i am unable to enter the PERSON RESPONSIBLE field (Message is NO VALUES SELECTED MAINTAIN ENTRIES).... if I am selecting yes with this message  it is routing me to Choose Customizing project.
    Please help me creating person responsible field
    Thanks in advance
    Rupesh

    Dear Rupesh,
    press F4, then for maintain entries press yes
    then enter on continue w/o specifying project
    then it's take u to location
    here double on any or PP work center
    then new entries
    and specify one name here
    then back, back & back
    now u can get the name here
    ADDED
    maintain directly in T-code OP10
    here go for new entries
    give ur plant & person name
    this should solve ur query
    Regards
    kumar
    Edited by: kumar kumar on Sep 5, 2009 9:37 AM

  • How to giv  the name of person responsible  in deadline

    hi
    im using a task and creating a workitem,
    in the latest end im giving the deadline, I am using a rule for determining the person to whom the deadline is to be sent.
    i want to show the person responsible for the work item in the dead line message.
    how this can be achieved ?
    kindly reply.
    Raghu

    Hi,
    If you are using modelled deadline , then in the branch of this deadline, you can use a method which determines (or try if result element of rule can be used) , the person responsible, and then get this person as export parameter of this method and bind to workflow container element, so that you will be able to use it in your next step.
    Regds,
    Akshay

  • Error in person responsible when contact person is changed

    Hello PCUI fellows,
    we are using the PC-UI Opportunity and Activity Application in CRM 5.0 SP 8. We have set the option "roundtrip cs search" for the Fields Prospect(Opportunity)/Contact Partner (Activity), Contact Person and Person Responsible. This are the steps to reproduce the Problem:
    1. Create a new Activity
    2. Enter a customer name into Contact Partner and press enter
    3. get a list of companies matching
    4. choose one which also has contact persons.
    5. The field "Contact Partner is now filled.
    6. click on the F4 Help for the Field "Contact Person".
    7. The search is opened and "Search by relationship" is prefilled with the companies Account ID.
    8. Search and choose one of the contact persons
    9. The field "Contact person" is filled with the contact persons account id
    10. Press enter
    11. Now the Field "Person responsible" which was filled with the Users Name contains only "No address data".
    Does someone had a simmilar problem?
    Best regards
    Gregor

    Greg,
    Are you using the standard views or customized views?
    If you had maintained the customized Z views then try to maintain the F4 Help field assignment at fieldgroup level under CRMC_BLUEPRINT_C->Input Help -> Field Assignment for transferring values. Enter the field group name here.
    For ex : I have mainted the given entries for Leads Partner F4 Help.
    View  Field Name                            Result List Field                   Field in Hitlist
    ZWA CONTACT_PERSON_LIST      CONTACT_PERSON_LIST        PARTNER1
    Make it a try..
    Thanks,
    Thirumala.
    Message was edited by:
            Thirumala Reddy Kalluri

  • How to change the Org Data depending on the Person Responsible?

    Hi Group,
    I have a requirement relating to Org data changing as :
    while creating the activities in CRM, by default I was getting the <b>Org data</b> for the person responsible ( whoever has created the <b>Activity</b> ).
    there is a provision that, we can change the <b>Person Responsible</b> for the Activity.
    and when the <b>Person Resp</b> is changed, the <b>Org data</b> also to be changed accordingly....
    But, this was not happening due to some technical reasons....
    So please give me some inputs as how to change the <b>Org data</b> according to the changes to the <b>Person Resp</b>.
    Thanks in advance.
    Regards,
    Vishnu.

    for this u have to maintain the rules profiles and attach this to transaction type for header or item category
    documentaion is there
    spro ->MD->org managment ->org data deter -->change rules and profiles

  • Substitution for Person responsible

    Hi All,
    I need to add a substitution step in an already existing rule. I want to substitute the field PROJ-VERNR Person Responsible. My logic is like if Prerequisite Company Code = X Person responsible is 1000, if Company Code = Y Person responsible is 2000 and if Company Code = Z then Person responsible is 3000.
    Can I define all these in a single step? Or I need to create three different steps.
    Regards,
    Suman

    Hi,
    Cannot get you. can you give me the steps. Because whenever I am trying to add fields for Substitution it allows one at a time I cannot repeat field selection in OPSN.
    So I cannot define in a single step like if Company Code = X OR Company Code = Y OR Company Code = Z
    Substitution: Person Responsible =1000
                         Person Responsible = 2000
                        Person Responsible = 3000.
    May be this is not logical aso and neither can I find the Field VERNR second time even if I try to add fields. I can add different fields offcourse.
    I decide to define in three steps.

Maybe you are looking for

  • How use the method hasPermission in weblogic server 6.1

    Hello everybody ! In my application web ,i restrict access to some ressources (some jsp) to some specified groups . So,i create permissions in the file web.xml , as indicated in the doc 6.0 . For example only the user : system can access to all the j

  • What's changed in the 1.2 prototype.

    The 1.2 prototype has surprisingly little documentation. I started this thread to try to remedy that, in part. I'm going to start off by listing what's I've noticed changed in 1.2, gotchas to watch out for, etc, and I hope you all will follow up belo

  • How to avoid Print pop-up while using a Adobe form.

    Hi Experts, I am calling a adobe form from a BAPI.I am using the following function modules FP_FUNCTION_MODULE_NAME and CALL FUNCTION fun_name. But when I try to execute the BAPI a print preview pop-up appears.Please let me know the steps to avoid th

  • Windows XP will not boot up, and only gives a blue screen on Qosmio F20

    I am having a similar problem to this: http://www.techspot.com/vb/topic26409.html The only solution to this is to reinstall/repair Windows XP Media Centre Edition: http://www.techspot.com/vb/showthread.php?t=8356&highlight=windows+repair This consist

  • Inventory cube 0CP_IC_C1 enhancement

    Hi, I want to enhance the Inventory cube 0CP_IC_C1 inorder to get the Purchasing details in to the inventory cube. Because i need the PO details pertaining to the particular Good Receipt values. Is there any way to get the PO details based on the GR