PO workflow showing status as APPROVED.. but in Oracle status is"IN PROCESS

In Our 11i , one of the PO workflow showing status as APPROVED.. but in Oracle Still showing the status as "IN PROCESS".. could you Please suggest solution...?

Hi,
What is the application release?
Please see if these docs help.
Troubleshooting Purchasing Approval for Documents in "IN PROCESS" or "Pre-Approved" Status [ID 225017.1]
How To Diagnose An Issue In Requester Change Order Processing [ID 453551.1]      
How To Reset a Document From In Process or Pre-Approved To Incomplete/Requires Reapproval For Isolated Cases [ID 390023.1]
Thanks,
Hussein

Similar Messages

  • SC status awaiting approval, but no workitems created

    Hi All,
    We have SC issue where SC is created and in approval tab, approvers are determined correctly. But approvers has not received work item.
    work item numbers are not created.
    when checked we foud that the event linkage is for main workflow template is deactivated.
    /SAPSRM/CL_WF_PDO     READY_FOR_WORKFLOW     WS40000014
    we activated the check box new SC's are working fine.Earlier shopping carts still showing awaiting status.We cant edit this SC.
    Bussiness users want to process this SC.
    Do share your valuable inputs
    Abdul

    Hi Abdul,
    The issue is Earlier SC are still approvers has not received work item after activating /SAPSRM/CL_WF_PDO     READY_FOR_WORKFLOW     WS40000014 ?
    If that is the Problem to trigger the SC´s to Approvers , you can ask basis team to execute this button in sost for particular SC
    button : `start send process for selection `
    Regards,
    krishna.

  • SC in Awaiting Approval but no work item found for SC

    Hi
    We are in SRM 5.5 Extended Classic Scenario will item-based approval workflow for SC.
    A requestor has created a SC which requires several steps of approval.
    The shopping cart has status 'awaiting approval' but when we check via BBP_PD system gives 'No workflow item found .
    Why this occurs is already strange we have lots of SC every day and workflow item is created properly.
    But 2nd question is if there is a solution available to retrigger / restart the workflow for this SC ?
    Any help would be appreciated

    Hi,
      did you check in SWI6 or SWIA?
    Saravanan
    Edited by: Saravanan Dharmaraj on Nov 30, 2011 1:57 PM

  • Purchase Order has approved but Status show as Unapproved

    Dear All Experts,
    I have a Purchase Order need to go throught approval procedure. The Purchase Order has approved by user and add into system and printed out. When second time, open the same Purchase Order, the status show "Unapproved" but the Purchase Order windows header name show Purchase Order [Approved], this make user unable to copy to GRPO. I have try to restore stored procedures in SAP B1, it does not make any changes. The user is using SAP B1 2007A SP0 PL49. Please Advise.

    Hi Angie
    the purchase order once approved has to be added on to the system after approval if u say that u have added the purchase order after it got approved then that seems to be a concern for that u need to contact ur sap partner or if u are a partner then u need to get in touch with sap to resolve the isssue as it could be because of problem with ur database
    but before that please be sure off that u are using the correct way and have sucessfully added the documnt apon approval.
    Regards,
    Manish

  • "Shopping cart Approved but status is Awaiting Approval"

    Hi Guys,
    We are working on SRM 4.0 in classic scenario. We have a weird situation where the shopping cart has been completely approved but the status is still in "awaiting approval". We are using teh item based approval badi.
    Does anybody have an insight to why this is happening. We never had this issue in the QA box in the past. The problem suddenly shows up.
    Please advise.
    Thanks,
    Sundeep

    Hi Sundeep,
    Which Service pack level are u in? SP08 or SP09.
    We have the same problem for SP08 for Workflow WS1000276 - Value limit with single approver.
    Here once the SC is changed, it comes back to the requester.
    When the requester accepts the changes, it hangs in awaiting approval state.
    I am still not able to find a solution.
    Were u able to solve this issue?
    Pls share ur solution with us.
    Regards
    Srivatsan

  • HT1937 i have a white iphone 4 that says it was approved but restoring from itunes does not show (congrats unlocked message)

    i have a white iphone 4 that says it was approved but restoring from itunes does not show (congrats unlocked message)
    hel

    MaDCrackeR wrote:
    Email from AT&T says the IMEI number was approved for unlocking
    ..........4S that worked fine and it shows the message "congrats unlocked" in itunes
    When restored. But the 4 does not. AT&T insists its unlocked but they are only going off
    Of the request and IMEI number. Is there a way from the phone i can verify it was unlocked?
    If AT&T e-mail says it is unlocked, then believe it is so. Insert non-AT&T SIM inside and after backing up restore in iTunes again. Unlock gets attached.
    You can check the status of the unlock request on AT&T web-site.

  • Why PSA data show red status when opened but green on PSA page?

    Run RSA1 -> click PSA to open PSA page, locate one infosource and find the PSA under it, find the status column shows it's green, but when opening it, find the 1st column shows red for each row.  How does the inconsitance occur?
    BTW, if we open the infopackage monitor for the above one, find a weird thing is that each request get two consecutive processes running with a circle of red ball and green ball in the left frame.  Double click one of them, in the right frame and click the monitor Status tab, the msg window is as following (in between two dashed lines below):
    Incorrect data records - error requests (total status GREEN)
    Diagnosis
    Data records were recognized as incorrect.
    System response
    The valid records were updated in the data target and can be used in reporting.
    The incorrect records were not written to the data target, but were posted retractively under a new request number in the PSA.
    Procedure
    Check the data in the error requests, correct the errors, and post the error requests.
    Sounds like the data failed to uploaded to data target due to error in PSA, but why the status show green in somewhere?   And if clicking the Details tab, all show green!  Weird!
    Thanks

    Hi Kevin,
    In your InfoPackage Update tab, click the Error Handling button. It seems that the Valid records update, request green option is chosen. This is why you see the green request and some error records.
    This means that the corect reocrds were loaded and are available for reporting, but the incorrect ones were left behind. This is used to check the erro records separatelt so that they do not disrupt the entire data load.
    Hope this helps...

  • How to stop the process chain showing status as yellow but no process step

    Dear Friends,
    How to stop the process chain showing status as yellow but no process step is running in that process chain.
    We have manually triggered the process chain for sales it finished successfully till load data but the next step is create index and DB statistics. Both of this steps are in unscheduled position only and no background job for this.
    Please guide me.
    Thanking you in advance.
    Regards,
    Shubhangi

    Hi,
      At times even I have faced this situation.  During those times, running the Function module RSPC_PROCESS_FINISH by passing the right parameters came to my rescue.
    Regards,
    Raj

  • Up next doesn't seem to work properly with multiple speakers over airplay. The status bar on the computer shows the song playing, but not over airplay. When I restart the song it plays, but the same thing happens when the next song cues up. Any ideas?

    Up next doesn't seem to work properly with multiple speakers over airplay. The status bar on the computer shows the song playing, but not over airplay. When I restart the song it plays, but the same thing happens when the next song cues up. Any ideas?

    Hey briannagrace96,
    Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/ts1363
    You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
    Try the iPod troubleshooting assistant:
    If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
    If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
    Restart the iPod Service
    Restart the Apple Mobile Device Service
    Empty your Temp directory and restart
    Verify that the Apple Mobile Device USB Driver is installed
    Change your iPod's drive letter
    Remove and reinstall iTunes
    Disable conflicting System Services and Startup Items
    Update, Reconfigure, Disable, or Remove Security Software
    Deleting damaged or incorrect registry keys
    Take care,
    David

  • I am running a late 2007 13" MacBook and when I check status of storage it is showing 88Gb of files but on Finder in Movies I cannot find more than 12-15 Gb where are the rest of the files?

    I am running a late 2007 13" MacBook and when I check status of storage it is showing 88Gb of files but on Finder in Movies I cannot find more than 12-15 Gb where are the rest of the files?
    I thought a screen dump of the sttus may help picture what I am looking at.

    Mike,
    That article did seem to confirm that it is not as straight forward as it might seem. Since then I have deleted some of the TV episodes I downloaded on iTunes and the available storage has increased, so I can only assume that when reviewing in finder the files for iTunes are not shown and it would appear one has to go into iTunes to delete them.
    I guess I may need to set up an external hard drive to store TV series etc as long as it is easy to transfer between the external drive and the MAC and subsequently my iPad as well, but that is for another discussion.

  • Absnce status is pending for approval, but supervisor dont get request

    Hi experts
    If i apply for absence and sumbit it, dann staus = PEnding for Approval, but my supervisor didn't get my request to approve my holidy request.
    Question: Why he /sehe will not get any entry in his page (Action pending for approval).
    Any suggestion????.
    Thx

    Hi Mehdi,
    I think in this case the approver to whom you are expecting approval request will go, its not going to that person, instead of that it is going to someone else.
    To find from backend to whom it is going
    Give this query
    select * from HR_API_TRANSACTIONS
    find out the item_key (Make sure item key is of your transaction only)
    select * from WF_ACTIVITY_STATUSES where item_key = (as got from above statement)
    now under this find the username that is specified against 'NOTIFIED'..
    This is the username with whom the notification is pending,
    Approve from this user, transaction will proceed further.
    Rupali

  • Goods confirmation workflow is awaiting for approval

    Hi Gurus,
    while confirm the goods/service when try to check the document i am getting a message as the document is free from errors but when i click on confirm the history is showing as " waiting for approval" but when i go to item details and click on approval button it is showing as "error in process".
    Has anybody experienced this type of problem?.
    Thanks,
    mahesh

    Hello Mahesh,
    You can verify the status of the Confirmation document through BBP_PD transaction.
    The confirmation status if the Awaiting approval should not yet checked.
    hence please check the status of the workflow related to the same confirmation in swi6 TRANSACTION.
    Try to complete the Workflow manually if the workflo is stucked.
    Then verify the status of the docment
    let me know if u have any difficulties in the above.
    Regards,
    Krish

  • Workflow Shows as 'In Progress' after Workflow has been completed.

    Hello All,
    I have created a custom workflow using SharePoint Designer. Within this workflow I have multiple 'approval process' tasks. In theory this was so that once the first user had approved the item then the next would be prompted to approve the item, and
    so on. The users that the item must be approved by are set when the item is submitted initially.
    Just so anyone reading this knows I have no formal experience/education in SharePoint workflow design, but I would like to think I know my way around SharePoint(in general) at this point.
    My problem is, the company I work for is just starting out using SharePoint workflows, and from what I understand workflows that are 'In Progress' are related to server performance. I noticed today that there are 5 items in the list which
    under the 'workflow status' column display that they are 'In Progress' which is entirely correct. However, when I go to -> 'List Settings' -> 'Workflow Settings' this workflow is showing 8 workflows 'In Progress'.
    Thank you to anyone who is able to help me with this,
    James

    Hi,
    According to your post, my understanding is that workflow shows as 'In Progress' after Workflow has been completed.
    To send the task one by one, you can select one at a time(serial) when you select Task Process Participants.
    Per my knowleadge, when you go to -> 'List Settings' -> 'Workflow Settings', it show all the workflows you associated to the list.
    To see the running workflow, you need to select an item, right click the title, and then select the workflow.
    However, each workflow enstance can only start once on an item.  In other word, you can not start the same workflow again untill the previous one is completed.
    As you said, workflow shows as 'In Progress'.
    Please make sure all the users have approved the tasks.
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • The approver does not show in the approval preview after saving sh. cart

    Hi ,
    I would appreciate if anyone can reply me for fixing the problem.
    Problem: The approver does not show in the approval preview after the shopping cart is saved, however before saving the shopping cart it shows the approver in the approval preview. We are using two workflows: WS10000060 – Auto approval and WS10000276- 1 level spending limit approval.
    Details of the problem:
    The following steps specify the problem in detail , it is applicable for both the workflows “WS10000060 – Auto approval and WS10000276- 1 level spending limit approval.”
    1.     Shopping created
    2.     The approval preview shows the approver ( please see #1 in the attached document) before saving the shopping cart.
    3.     Shopping cart is saved.
    4.     After saving , Check status transaction shows the shopping cart in status “awaiting approval”
    5.     The section approval shows “ No workflow started , application error occurred”
    6.     T.Code SWI1 shows the workitem created for the shopping cart but in error.
    7.     The work item container does not show any agents
    I would appreciate it anyone can reply as to how to fix it ASAP.
    Best Regards
    Pawan

    Hi Disha,
    I have synchronised through SWU_OBUF several times since yesterday , but still at the same place.
    In the workflow customising - The only red entry which I have is for check entries from HR control tables under Mainiatin definition env. and Mainiatin guded procedure for gateway under guided procedure (new in SRM 5.0) .The verification workflow works fine . Also I think these entries will not impact the workflow functionalhese were red even in my earlier system .
    SLG1 shows all green entries and there are no entries in RZ20.
    I have specified task TS10008126 as general task as I want anyone who is identified by SLAapprover should be able to process the workitem and as per documentation I can specify this task as standard task.
    What should I do.. , anything am I missing .
    Thanks and Best Regards
    Pawan

  • PO stuck with status Awaiting Approval

    We have the following issue: for example a PO with 3 version (change 1, change 2 and active 3). when you display the PO in the portal you see the change 2 in status ... "Awaiting approval" but when you check the Approval table, it shows ... Approval process already finished, when you see in bbp_pd .. you see that the workflow items for change 1 and active 3, have status COMPLETED, but the change 2 have status ERROR.
    If someone knows how to fix this ... the help would be appreciated.
    Thanks
    Karina

    Hi Cardac,
    do you mean to say change 2 is marked as closed , the woritem id for chnage 2 is shown as completed  but status is still shown as "awaiting approval" and higher version 4 is not created ?
    if that is the case , please check the set release method is complete for workitem id (change 2) , check in sm58  there is nothing in error related to workflow.
    try executing the FM BBP_PD_PO_STATUS_CHANGE_WF. trying creating another event "SAVED" through SWUE.
    cheers
    Iftekhar Alam

Maybe you are looking for