Populator not working after deleting model and items from Oracle cofigurator.

I had created a ATO model, and populated it to the Configurator, worked with it, created UIs, tested with OM (and BOM) worked alright.
But, I had to delete the items and models in the Configurator as my playing around had messed it up. Now I populated it again from Oracle Apps, it is not bringing in the items (none at all) and it is not bringing in the options for option classes more then two level deep. Also, weirdly only the descriptions keep appearing in the Model tree node not the name, even if I choose it in the tree. I tried running purge configuraotr tables.
Do you have any idea why this is happening. Any help would be appreciated.
Thank you again.

First, back up your Mac. To learn how to do that read Mac Basics: Time Machine backs up your Mac
Then:
Launch the Console app - it is in your Utilities folder. You can find it by selecting Utilities from the Finder's Go menu.
If the log list column on the left is not already displayed, show the log list by selecting Show Log List from Console's View menu. Select Show Toolbar if it is not already shown.
Locate system.log in the list and select it. Many date and time-stamped entries will appear, hundreds of them, and you must find the entries relevant to your Mac's problem.
To do that click the Clear Display button in the Toolbar. All previously displayed log entries will reappear.
Next: Perform whatever actions cause the Mac to exhibit the slow behavior. If the problem is caused by errors logged by the system, the Console window will show them being recorded in system.log.
One or more of them, along with their time stamps, may reveal the reason for the problem you describe.
Copy and paste those log entries in a reply. If hundreds of the same repetitive messages appear, please edit them before posting. There should be no need for more than 100 or so total log entries.
Most of the entries will be cryptic but will contain information you might consider personal such as your Mac's name. If you do not want that information to appear, delete or obscure it when posting your reply. Leave enough information so that the entries can be deciphered.

Similar Messages

  • Jar file is not working after deleting all packages from the same directory

    hello
    i have created a jar file named as server.jar in the same directory in which i have all the packages(for which i have created this jar file).This jar file was working correctly when i had all the packages in the same directory.But after deleting all the packages from the same working directory, this jar file is neither working nor giving any error message..
    Please tell me what may be the reason???
    thanks in advanced

    hello
    i have created a jar file named as server.jar in the same directory in which i have all the packages(for which i have created this jar file).This jar file was working correctly when i had all the packages in the same directory.But after deleting all the packages from the same working directory, this jar file is neither working nor giving any error message..
    Please tell me what may be the reason???
    thanks in advanced

  • IPhone 4 ear speaker not working after 2 restores and cleaning the headphone socket.

    Hi,
    I know this problem is not uncommon, but here goes...
    I have an iPhone 4 which was running iOS 5.1.1 a few days ago when the ear speaker stopped working.  I cant hear the other person when I make or recieve a call, but nothing else is wrong with the phone.  It is 18 months old.
    I've searched the discussions and seen some of the suggestions.  I tried cleaning out the headphone socket, with no luck.  I then tried a full restore and update to iOS 6.  This appeared to have worked.  I tried 2 calls and I could hear the other person.  I then left the phone alone for a couple of hours and when I tried it again, it had stopped working again.
    I have since done another full restore but the speaker is still not working at all.  The fact that it worked after the first restore suggests it's something simple or software related but I have no idea what else to try other than getting it repaired in a shop.  The problem is I am in Japan where my network (Softbank) and an independent repair shop have both quoted me the equivalent of $176 / £110 to fix it.
    Does anyone know anything else I can try before I give in and end up shelling out this ridiculous cost for something that is probably a 20 minute fix?
    Any help would be appreciated.
    Thanks

    I have the exact same problem with my ear speaker after my IOS 6 upgrade. My speakers work, bluetooth works, the earphones work, but the ear speaker doesn’t work. I noticed this IMMEDIATELY after the upgrade was completed. I also have the following problems:
    -Very slow call connect time. 30 - 45 seconds just to connect is typical. Signal strength is 5 bars (ATT)
    -Problems attaching to known networks
    -Very slow internet browsing with many timeouts on both the ATT 3G service and known Wi-Fi networks.
    - My camera was missing after the IOS 6 upgrade. I restored that from Restrictions inside of the Settings App
    - Music was so screwed up it was easier to just restore it
    I went to the Apple store hoping to get some support. Between my wife, my son, and myself we have purchased 4 iPhones and an iPad over the last few years with plans to purchase another iPad in a month or so. So it’s not like I' not familiar with Apple Technology and their typical level of support.
    The individual who waited on me was rude and condescending. He insisted that all of the problems were hardware related or ATT’s fault, or my fault. He further asserted that IOS 6 had NOTHING to do with any of the problems. I pointed out that it would be quite a coincidence for my hardware to break, for ATT to have network problems, and for me to suddenly forget how to use an iPhone at the same exact moment that IOS 6 had been installed. He maintained his position and offered to sell me another phone.
    I don’t expect the folks in the store to reprogram the OS. Mistakes happen. I’m going to guess that Apple’s OS programmers are already working on a fix for many of the IOS 6 complaints that are easy to find on Google. Assigning blame to the customer and denying any responsibility is not a model for success or customer service. I’m sure Apple wouldn’t accept that kind of excuse from their component manufacturers and don’t think it is how they should deal with their customers. Further, Apple wants to own the device. They want to control the apps, the OS, battery, the delivery channel. I’m good with that so long as when there is a problem, they own that as well.
    And BTW… I’m not including the maps in my list of issues with IOS 6 because I kind of like the new maps and am willing to give Apple the benefit of the doubt. I believe that their map service will get a lot better in a hurry.

  • PO change output not triggered after deletion of line item

    Hello SAP experts,
    I have one issue with PO output
    I have created PO with output type & we are outputing through ME9F( 3- Send with application own transaction)
    Below is the sequence,
    1.PO created & outputed thru ME9F
    2.Now ,i added the line item in the PO,Output triggred but not processed.
    3.I deleted the line item immedietely,Output not triggered.
    (My question is Why the output is not tiggered?)
    4.I outputed it through ME9F,vendor will receive only 1st output & never get the 2nd o/p for the deletion of item.
    I am clear that after processsing the 1st output,then only i can process the 2nd.
    But in business point of view,this scene created the problem.
    Please provide your valuable input.

    Hi,
    In IMG - Materials Management- Purchasing-Messages - Fields relevant to Print out of changes
    Enter Table EKPO , Reference Field LOEKZ, tick on change print relevant for purchase order,in routine enter 03.
    Now your Output will be triggered with a change indicator and you can process it using ME9F.
    Regards
    Chandra Shekhar

  • IPod is not working after being formatted and restored.

    This isn't the first time this has happened to my iPod classic. In a span of about 5 months, I've visited the Genius Bar, and one has been replaced under warranty. Now, the newly replaced one has suffered the same things that the old iPod has experienced. One day, as I was syncing new music, iTunes suddenly froze and had to abort the sync, making me eject the iPod without the sync completing. So, iTunes deleted all of my data (music, photos, videos, etc.). Now, each time I plugged in my iPod following that, iTunes had always frozen, and did not let me access the Devices tab and restore my iPod. Then, having a PC, I formatted it to its default settings, seeing that my computer recognized the iPod and iTunes did not. A pop-up box came up saying if I wanted to fix the problem on the iPod, and I prompted to do so. It completed, and it said my iPod was fully functional. Soon after, it was recognized by iTunes again, and said that it had corrupted files and needed to be restored, seeing that the iPod was under the Devices tab once again. I did so, the restoration was completed, and iTunes said that once after the iPod restarted, it would appear once again under the Devices tab. But, however, it did not appear, after leaving it plugged in for about 5 minutes. iTunes froze again, and now the process begins all over again.
    I have fully updated my iTunes, and I am using an HP Pavillion Notebook, under Windows 7.
    I need help. I don't want to go back to make a reservation at the Genius Bar since the iPod is no longer under warranty, and perhaps I can fix it on my own. Will they  be able to fix it under no charge? What should I do?

    Also, if I eject it from the folder where all Devices are on my computer, the iPod restarts, and the restoration process on iTunes starts all over again.

  • Service not working after altering Model provider class

    Dear all,
    I have created a OData service and consumed it successfully. I was able to post data to it. Now after altering the "model class" i.e., adding one property and changing ABAP Dictionary type. After doing these changes but i couldn;t consume the service and get "500 Internal server".
    Did anyone experience this problem? Please note i didnt use Service builder(SEGW) to create a project instead i did all manually using Model and Data provider classes.
    Please suggest. Your help is appreciated.
    Points will be awarded to helpful answers.
    Regards
    Prabaharan

    Hello Prabaharan,
    This is a generic error at client side and there can be multiple reasons for it. This error is from the hub system and only way to check this error is to look into error log and application log in hub system.
    Common Problems: property type errors (date, decimal/precision etc.)
    But looking at the problem you are facing like Ron suggested you might get 500 internal server error because properties like data and time need to be defined nullable and you might have missed that.
    Kindly check and mark fields as nullable if properties you are sending in the payload are null values.
    lo_property->set_nullable( ).
    Cache clean up is required only when you have done some changes to your model.
    See the metadata and confirm if the new property added by you is present. if you are not able to see then do the following.
        Try Clearing the cache using /n/iwbep/cache_cleanup and /n/iwfnd/cache_cleanup t-code.
        Also clear server cache using /nsmicm t-code as shown below.
    Regards,
    Ashwin

  • Phone not working after line move and number change

    Hi. I just removed my line on my on plan and changed my number. Now my phone will not work such as making calls.

    Did you reactivate the phone?
    Try restarting the phone by holding down the top/power button and the Home button at the same time until the phone restarts.
    Try dialing *228 from the phone and follow the instructions to activate the phone.
    Try logging on to your MyVerizon account from a computer and select "Activate Device".

  • HT1937 My Iphone does not work after buying it and using it for 3 months how can I gert it fixed?

    I brought my Iphone on the At and T site 3 months ago and it's not working how can I have it repaired?

    I think that you should just contact the place you bought it from and have them take a look at it,  and if you have the warrenty on your iPod you can get a new replacement too. 

  • Cisco ISE guest portal redirect not working after successful authentiation and URL redirect.

    Hi to all,
    I am having difficulties with an ISE deployment which I am scratching my head over and can't fathom out why this isn't working.
    I have an ISE 3315 doing a captive webportal for my guest users who are on an SSID.  The users are successfully redirected by the WLC to the following URL:https://x.x.x.x:8443/guestportal/Login.action?portalname=XXX_Guest_Portal
    Now when the user passes through the user authentication splash screen they get redirected to https://x.x.x.x:8443/guestportal/guest/redir.html and recieve the following error:
    Error: Resource not found.
    Resource: /guestportal/
    Does anyone have any ideas why the portal is doing this?
    Thanks
    Paul

    Hello,
    As you are not able to  get the guest portal, then you need to assure the following things:-
    1) Ensure that the  two  Cisco av-pairs that are configured on the  authorization profile should  exactly match the example below. (Note: Do  not replace the "IP" with the  actual Cisco ISE IP address.)
    –url-redirect=https://ip:8443/guestportal/gateway?...lue&action=cpp
    –url-redirect-acl=ACL-WEBAUTH-REDIRECT (ensure that this ACL is also  defined on the access switch)
    2) Ensure that the URL redirection portion of the ACL have been  applied  to the session by entering the show epm session ip   command on the switch. (Where the session IP is the IP address  that is  passed to the client machine by the DHCP server.)
    Admission feature : DOT1X
    AAA Policies : #ACSACL#-IP-Limitedaccess-4cb2976e
    URL Redirect ACL : ACL-WEBAUTH-REDIRECT
    URL Redirect :
    https://node250.cisco.com:8443/guestportal/gateway?sessionId=0A000A72
    0000A45A2444BFC2&action=cpp
    3) Ensure that the preposture assessment DACL that is enforced from  the  Cisco ISE authorization profile contains the following command  lines:
    remark Allow DHCP
    permit udp any eq bootpc any eq bootps
    remark Allow DNS
    permit udp any any eq domain
    remark ping
    permit icmp any any
    permit tcp any host 80.0.80.2 eq 443 --> This is for URL redirect
    permit tcp any host 80.0.80.2 eq www --> Provides access to internet
    permit tcp any host 80.0.80.2 eq 8443 --> This is for guest portal
    port
    permit tcp any host 80.0.80.2 eq 8905 --> This is for posture
    communication between NAC agent and ISE (Swiss ports)
    permit udp any host 80.0.80.2 eq 8905 --> This is for posture
    communication between NAC agent and ISE (Swiss ports)
    permit udp any host 80.0.80.2 eq 8906 --> This is for posture
    communication between NAC agent and ISE (Swiss ports)
    deny ip any any
    Note:- Ensure that the above URL Redirect has the proper Cisco ISE FQDN.
    4) Ensure that the ACL with the name "ACL-WEBAUTH_REDIRECT" exists on  the switch as follows:
    ip access-list extended ACL-WEBAUTH-REDIRECT
    deny ip any host 80.0.80.2
    permit ip any any
    5) Ensure that the http and https servers are running on the switch:
    ip http server
    ip http secure-server
    6) Ensure that, if the client machine employs any kind of personal  firewall, it is disabled.
    7) Ensure that the client machine browser is not configured to use any  proxies.
    8) Verify connectivity between the client machine and the Cisco ISE IP  address.
    9) If Cisco ISE is deployed in a distributed environment, make sure  that  the client machines are aware of the Policy Service ISE node FQDN.
    10) Ensure that the Cisco ISE FQDN is resolved and reachable from the  client machine.
    11) Or you need to do re-image again.

  • Key combinations strg+b, strg+s, strg+p are not working after swapping fn and strg

    Hey guys.
    I just got my brand new Lenovo e540 and I really like it. I only got one problem and would like to know if there is a fix for it.
    I swapped the fn- and strg-key in BIOS setttings and everything went fine at first. But then I realized that some strg-combinations aren't working.
    The following combinations are not working: strg+b, strg+p, strg+s (as far as I remember) And it is really annoying if you can't save your notepad-document with strg+s.
    Now I came across these information:
    Fn+B= break
    Fn+P= pause
    Fn+S= sysrq
    Fn+C= ScrLK
    Fn+I= insert
    Is it possible, that this is the source of my problem? Because technically im still pressing the fn-key when doing my strg+s combinations because I swapped the keys in BIOS. The odd thing is, that strg+c is working absolutely fine.
    I already tried disabling all services and programs starting when booting up the pc but the problem still occured.

    I want to update the bios so much, especially because of the cleaned-up noise when using 3D...
    But i can't because of the darn shortcuts (FN+S is especially  troublesome for me).
    Come on guys, please add an option to disable those shortcuts or atleast make them swap when we swap ctrl+fn.

  • Spotlight & Mail Search Not Working After Deleting email Account's '.OfflineCache' File.  How Do I Get Back to Normal?

    Running OSX 10.7.4 and Mail.5.2.
    One of 3 email accounts was constantly trying, but unable to synch.  The rotating splines were turning non-stop but not synching (other two email accounts worked just fine.)  After doing some searching on the internet, I found several articles about this.  Many included the symptom of the "Recovered Messages" constantly being recovered/generated.  I had noticed that I would get some recovered messages on occaision, but had never noticed it to be problematic.  These articles suggested that the ".OfflineCache" file for that email account had been corrupted or the root of my problem.  So, I deleted the .OfflineCach file as per this article...
    Fix OSX Mail Creating Multiple 'Recovered Message
    Well that got my mail working again.  However, I soon noticed that spotlight no longer works and when I try to search mail, it doesn't work.  It will only return a complete email address/contact; it doesn't search the contents of the email.
    I tried to get spotlight to re-index the hard drive.  However, when I try to drag a folder or volume to it, I get the error:
    Since spotlight and mail search have always worked flawlessly for 5 years, I'm confident this is related to having deleted " .OffflineCache" for that particular email account.  However, it seems strange that mail search won't work for the other email accounts.
    Any other tips for getting spotlight back online?
    How about the .OfflineCache file.  Will Mail restore it, replace it on it's own?
    Any help would be greatly appreciated.
    Also, looking back, not long before this problem started, I was trying to send a single email with numerous pictures ( around 50 or so.)  I forgot to select "medium" for the picture size and it started trying to upload them at full size.  I realized this after a minute or two and cancelled the upload, changed to 'medium' and sent the email with no problem.  I point this out because the "Multiple Recovered Messages" error seems to be related to or being induced by having an excessively large file in the particular mail account's .Offline.Cache file.

    Well, a couple days later and it seems that the .offlinecache has been rebuilt.  Finder, Spotlight, & Mail search all seem to be working normally now! 

  • T40P ACCESS IBM BUTTON DOES NOT WORK AFTER INTIAL OPENING AND MUSIC PLAYS ????

    Hello, from a very un-savy laptop and computer user,my T40P thnk pad doesnt work when you push ACCESS IBM BLUE BUTTON,??Ive tried to uninstall some of the IBM componets,But not haveing a real clue as what to uninstall ,i i did uninstall a few that a earlier post reply suggested,.?then i downloaded the programs again and ,still nothing works corectly,Im going to paste a list of installed IBM programs in this message ,so that if someone reads this ,they will see what i have and the versions too.Any help on this would be a real blessing  ,im lost as far as  being-    A    computer repair tech goes,Thank you in advance for any reply post to my problem,.Thank you ,what a great fourm to be invloved with,
    Computer Name: TOMS
    Computer OEM: IBM
    Computer Model: 2373G5U
    Serial Number: 99YHKN3
    OS OEM: Microsoft Corporation
    OS Name: Windows XP Professional
    OS Type: Windows NT / 2000 / XP
    OS Version: 5.01
    OS Build: 2600
    OS Service Pack: Service Pack 3
    System Enclosure: Notebook
    INSTALLED IBM SOFTWARE:
    Package Name: Access Support
    Version: "en2.0.61"
    Package Name: AccessIBM
    Version: "4.03"
    Package Name: EasyEject
    Version: 1.00.000
    Package Name: eGatherer
    Version: Unknown
    Package Name: IBM Access Connections
    Version: 1.00.000
    Package Name: IBM ThinkPad Keyboard Customizer Utility
    Version: 1.1.0
    Package Name: IBM ThinkPad UltraNav Wizard
    Version: "1.10"
    Package Name: IBM TrackPoint Accessibility Features
    Version: 1.00.000
    Package Name: IBMPM
    Version: Unknown
    Package Name: Messaging
    Version: "1.0.5.8"
    * Version: ""
    Package Name: NPdirect
    Version: 1.00.000
    Package Name: QConnect
    Version: 1.00.000
    Package Name: ThinkPadSoftwareInstaller
    Version: "1.03.0301"
    * Version: Unknown
    Package Name: TPHOTKEY
    Version: Unknown
    Package Name: TpKmap
    Version: Unknown
    Package Name: TrackPoint
    Version: Unknown
    MODEL OF THINK PAD, IBM 2373-G5U T40P

    Hi Tom.  I just went through the same issue with my T42p.  After uninstalling/downloading/reinstalling the Access IBM software it still didn't work so I found my way here.  At first my visit didn't seem promising but I did a search of the forum for Access IBM and found a post in which somebody suggested installing the ThinkVantage System Update utility.  I did that, rebooted and accessed the utility through the start/programs menu and installed 3 critical updates, rebooted again, et voila, Access IBM is fully functional.  I've since gone back there a couple more times and am in the process of doing a fairly large download of optional updates.  It appears to be a cool utility that even allows for setting up automatic updating.  Kudos to whoever posted that link.
    http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=TVSU-UPDATE
    At least I'm fairly sure this is where I went to download the thing. Took a couple of tries to successfully flash the bios but all seems fine now.  If you do decide to do this and also to flash the bios do yourself a favor and have your machine plugged into your AC adapter with a fully charged battery *before* you start that particular drill.
    Luck
    -joe
    Joe T42p (T2373C96), T60p (8743FKE5)

  • USB warning and ports not working after update to Snow Leopard from Tiger

    I've gone for hours through all kinds of forums without finding a proper answer, so here I am.
    This morning I've installed OS Snow Leopard 10.6.3 on my iMac, previously I had OS Tiger 10.4.11 running. Everything seemed fine until I restarted and then I started getting "USB drawing too much power" promps all over the place even though the only thing that's attached to the iMac is the keyboard and the mouse (they both work fine). The process went like this:
    The iMac is a 2.4 GHz Intel Core Duo from october 2007
    First I did an upgrade of my RAM, from 1GB to 2GB, that went ok.
    Then I runned the install dvd for Snow Leopard, I did not perform a clean install, just did it over my old data. After restart, everything worked but i got this USB warning message, one of them. At that point my usb's still worked, (even though the warning) I could print and scan. To get rid of the warning, i resetted the PRAM and SMC, as suggested everywhere. After doing so, the promps multiplied and my usb ports ceased working, except for the keyboard and the mouse attached to it.
    I've done the Apple Hardware Test, and it gives no malfunctions.
    Firewire works fine, Isight buildt-in camera and bluetooth too.
    I've tried all usb's and the keyboard will work in all of them, not like my printer and scanner which are completely ignored.
    USB power warning also appears at restart with no deviced connected (no keyboard and mouse, i've tried).
    I've also found in many forum entries  the possibility of a problem on the logic board, but since i've never had a problem with my imac until today i would not be sure about a hardware malfunction.
    The last thing i've found around that could be a clue is something about the kernel extensions, but that's complete chinese for me, I'm  a mac plug&play user and not too much of a mac expert.
    Does anybody have an idea about what could be going on? Should I perform a clean install of snow leopard? Would that solve the problem?
    Many thanks in advance to the community for the help, I'm quite lost since I've owned macs for the last 15 years and this is the first problem I have with one.

    I think it's serious, but if it didn't do it booted from Install Disc then Software is highly suspect.
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    Did we get the warning in Safe Mode?

  • PID advanced not working after switching on and off

    Hello there,
    I am trying to simulate the control of an inverted pendulum with the simulation module and the PID toolkit and actually the model runs fine with one problem remaining. When I switch the PID to manual mode and then back to automatic the controller is not able to balance the pendulum to 0 degree like he has done when I started the program.
    I have added the project maybe someone has an idea how to get this working because I am not that familiar with these toolkits.
    Thanks in advance and best regards
    Philipp
    PS: I am using two different models in the project but both have the same problem.
    Attachments:
    Inverted Pendulum.zip ‏767 KB

    Philipp,
    The problem that you have is actually a common problem for those who try to use PID for this problem.
    When you try to use only one PID to control angle, the controller is able to keep it up right in the beginning. However, when you switch the controller on and off (going from automatic to manual), this perturbance will make the cart to move to one direction (adding momentum to it) and the PID will try to bring it back to the center, but it will be far away from the center. If you give time, it eventually will bring back to 0.
    In this link below, you have more information about this problem and, most important, tells you that for practical controllers, you can't use static PID for this problem. Maybe you could use gain scheduling PID or cascade PID to also control position also. In general, the LQR controller works pretty well for this problem.
    http://www.engin.umich.edu/group/ctm/examples/pend/invPID.html
    Anyway, let me know if that answer your question.
    Barp - Control & Simulation Group - National Instruments
    Barp - Control and Simulation Group - LabVIEW R&D - National Instruments

  • Acrobat 9.0 shared review not working after FrameMaker 11 and RoboHelp 10 are installed

    Acrobat professsional 9.0 shared review function was working fine when I was using FrameMaker 7.2, but after I install FrameMaker 11 and RoboHelp 10, nothing happens when I select "Send for Shared Review" or "Attach for Email Review", no error messages, no prompts, just nothing...btw, the system is Windows XP SP3.
    Is it a compatibility issue? Does the same issue happen to you and how you fix this? Thanks for your help..
    Stephanie

    We are getting this on certain machines and not others.  I can't seem to be able to find a rhyme or reason.  We are trying to initiate reviews on a shared internal network location.
    A few questions for the forum:
    Does Owner rights matter on the share that the review file is to be stored in?  Currently we have Modify rights for all participants and initiators.
    Does it make a difference which updates are installed past 9.0?  Does it make a difference if Pro and Reader are installed?
    Can someone confirm that the Acrobat.com is required to be installed on the machine?  I noticed on the latest installs of reader acrobat.com application is not installed.
    I'm posting this now because I haven't seen a clear cut answer to:
    Could not save the shared review-enabled PDF file

Maybe you are looking for