Port generation error when ALE setup

Hi ,
I am getting the below error when i try to generate the Partner profile .
Port could not be created
PR3CLNT400 PR3CLNT400
RFC destination PR3CLNT400 not specified for system PR3CLNT400
Enter the RFC destination and restart the generation "
Could you please let me know the reason .
I have done the same setup for Quality server sucessfully . when i try to do it the same for Production , its giving me program .
Thanks&Regards
Srinivas

Hi,
How to check 'Logical system ' in Place or not ?
Path: Go to transaction SALE -> Sending and Receiving Systems -> Logical Systems -> Define Logical System
I always generate the partner profile manually (via WE20) and always work fine. Sometimes I face an issue when try to generate froom BD64 and the error does not make sense (though happened). Give it try ...
Regards,
Ferry Lianto

Similar Messages

IDoc_02_Error passing data to port-Communication error when sending with HTTP

Hello All,
We are receiving the error "02_Error passing data to port-Communication error when sending with HTTP", when sending the idoc to PI from ECC system.
Observation:
1. Some idocs are failing and immediately after sometime the same type of idocs with different idoc numbers are getting successful.
Eg: Orders. One purchase order is failing at one point of time. later another purchase order is getting successful after some time to the same partner.
2. If i perform the reset of idoc, then it is getting delivered during next scheduled job run.
please help me in resolving the issue.
Regards,
Ch. Venkat.

status 02 is Error passing data to port ...it simply means your port setting has some problem. do configure your port setting and also in partner profile
Thanx and Regards
Arpan Maheshwari

Generation Error - when trying to publish a Java web service

Hi All,
I keep getting the following Generation Error -- java.util.NoSuchElementException_ when I'm trying to create a Java Web Service using the jdeveloper wizard.
I have 2 entities and 2 stateless session beans acting as their facades. One entity has a One-One(FK) relationship with the other entity. I test out the entities and session beans using the test client and the OC4J embedded container and everything seems to work. When I try to generate a Java WebService from one of the entities I keep getting the "Generation Error". Could someone please provide me with some insight into why I'm facing this problem, because it seemed fine when I published J2EE web services previously and now this happens and I cant seem to publish web services anymore. Everytime I keep getting the same GenerationError. Thanks in advance.

Without going into any technical discussion about the code, my first question is what JDK version was used to create this which was imported into the form? Understand that Forms 10 runs on JDK 1.4.2, so if you used any newer JDK version, likely there will be problems.

Code generation error when implementing an accumalator

Hi everyone,
I am implementing an accumalator which implements X = X + Y where X and Y are memories of length say 5. Initially I write 5 values into X and Y using a for loop. Then I perform the addition inside a single cycle timed loop and store the results in a temporary buffer(another memory) again of length 5. In another single cycle timed loop, I copy the data from the temporary buffer to memory X.
I changed the arbitration option to never arbitrate for X, but I get a code generation error because of arbitration. Could anybody please tell how to solve this problem.
Regards,
Prashant
Solved!
Go to Solution.

Hi NitzZ
I figured out a way to solve the problem. I chose the "Never Arbitrate" option for all memories and replaced the for loop with a timed loop. Now there are no errors.
Thanks,
Prashant

Error when filling setup table

Hi!
I'm trying to fill the set-up table in R3 for SD Billing Documents.
SBIW (Display IMG (Settings for App Specific Datasources --> Logistics --> Managing Extract Structures --> Initialization --> Filling in the Setup Table --> App. specific setup of statistical data)..
When running the program i get this error msg:
"More faulty documents found than the tolerated 0000000000"
The result is that the program stops. Some of the data is coming into the set up tables, but this seems to be inconsistent.
Anybody know what I could do?
BR
Bjørn

Thanks a lot..
How can I find the log of dumped jobs?
BR
BJørn

Error when running setup table for 2LIS_03_UM

Hi experts,
When running the setup table for 2LIS_03_UM, we got the error message "Plant FP01 does not exist." Any suggestions on how we can fix this?
Thanks,
Donna

check if this plant has been maintained in source system or not. If not, ask the concerned team to maintain it.
Another way may be to allow error records which should ignore errornous records and rest should be filled in setup table.
Regards,
Gaurav

Model generation error when using java.util.List in JavaBeans

hi there,
when I try to generate model classes from JavaBeans classes,
packed into a JAR the generation process always stops with erros when the Bean class uses a property of type
java.util.List. See my example:
class MyJavaBean{
private java.util.List someMembers;
The error is:
Inspecting relation "MyJavaBean.SomeMembers" for source class "MyJavaBean"
[Warning]:This relation cannot be added as the TargetModelClass is not specified
[Error]: There are one or more relations unresolved. Importing the model without resolvoing the relations might result in erratic output.
Must I use a workaround or does anybody know something about this problem ? Installed: NW SP12
thx,
sabine

Hi Bhavik,
Can you please explain the error which you are getting while importing the model.
Please have a look at this tutorial.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/webdynpro/tutorial on using ejbs in web dynpro - 20.html
Hope it helps.
Regards,
Naresh

Error when running setup: Attach to native process

Hi,
I try to install the oracle iplanet webserver (version 7.0.13) on linux (centos 6.2, 64 bits).
I first installed the compat-libstdc++-33 packages.
After that I installed JRE, this version:
java version "1.6.0_31"
Java(TM) SE Runtime Environment (build 1.6.0_31-b04)
Java HotSpot(TM) 64-Bit Server VM (build 20.6-b01, mixed mode)
To install the iplanet webserver I first extract the content of the downloaded file (Oracle-iPlanet-Web-Server-7.0.13-linux-x64).
Then I try to run setup with the command ./setup
The error I get is: attach to native process failed.
Any idea what is wrong?
Regards Stefan
Thanks for the help.

Stefan,
I am seeing the same error on Ubuntu 12.04 Precise Pangolin (which is admittedly unsupported). This happened to me once before on an older version of Ubuntu, and as I recall, it was a missing library dependency, but I am not able to locate the fix I came up with at that time.
Interestingly, my existing ws7u12 installation runs fine, I just cannot upgrade to the latest update (15).
I have this software under support, but only on Solaris (I develop on Ubuntu, but deploy to my production Solaris server). In any case, as Ubuntu is not officially supported, opening an SR for this problem would be a waste of time.
I'll continue digging for my old solution and post here if I find it. If you've since discovered the solution, I'd love to hear it.
Thanks,
Bill

URGENT: PDF generation Error when executing .jat

Hi Guys.
Here is the thing. I have a sample code on a java class (see it below), with this I can perfectly create the PDF file when I run the project from netbeans 6.9 ... however, when I create the .jar file for the project and try to execute it, then I get an Error message saying that an exception has happened (this is not handled, despite the existing try-catch)... Could you please try it yourselve and/or help me out with this...
import java.io.File;
import java.io.FileOutputStream;
import java.io.OutputStream;
import java.util.Date;
import com.lowagie.text.Document;
import com.lowagie.text.Paragraph;
import com.lowagie.text.pdf.PdfWriter;
import javax.swing.JOptionPane;
public class GeneratingPDF_V2 {
public static void main(String[] args) {
try {
OutputStream file = new FileOutputStream(new File("C:\\GD\\Test.pdf"));
Document document = new Document();
PdfWriter.getInstance(document, file);
document.open();
document.add(new Paragraph("Blabla"));
document.add(new Paragraph(new Date().toString()));
document.close();
file.close();
} catch (Exception e) {
JOptionPane.showMessageDialog(null,e.getMessage()) ;
}//END OF GeneratingPDF_V2 --------------------------------------------------------------

913603 wrote:
The exact message I am getting says "An Exception has happened" and nothing else. I believe that if an exception happens, it should get caught within the try catch statemente in the code and then prompted to me on screen, but that is not what is happening. Please indicate me if there is another exception type I am missing to catch or other way to trace on this, as it only happens when I run the .jar file, running it through netbeans gui works ok... where could be the difference!?Likely a mismatch in library dependencies. Netbeans itself is also just Java, but it manages the classpath for you. When you run outside of Netbeans you're on your own.

Port conflict error when trying ot run the page.

Hi ,
Below is the error message whern I try to run the page.How to resolve it.
I tried checking tools->preferences->embedded oc4j->Host name to default local ip address and local host name
Another trial was : open Task Manage ->Process tab..if there will be two process jdevw and javaw. Terminated those process and then start JDeveloper and run the page,it should work , but i could find only java.exe running.
Appreciate your help.Thanks.
**** JMS port conflict detected. The JMS port will be reassigned to port 9236.
[Starting OC4J using the following ports: HTTP=8995, RMI=23892, JMS=9236.]
D:\MC\oajdev\jdevbin\jdk1.4.2\bin\javaw.exe -client -classpath D:\MC\oajdev\jdevbin\j2ee\home\oc4j.jar;D:\MC\oajdev\jdevbin\jdev\lib\jdev-oc4j.jar -Xbootclasspath/p:D:\MC\oajdev\jdevbin\jdev\appslibrt\ojdbc14.jar;D:\MC\oajdev\jdevbin\jdev\appslibrt\nls_charset12.zip -DFND_JDBC_STMT_CACHE_SIZE=200 -DCACHENODBINIT=true -DRUN_FROM_JDEV=true -mx256m -Xverify:none -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 com.evermind.server.OC4JServer -config
D:\MC\oajdev\jdevhome\jdev\system9.0.3.5.1312\oc4j-config\server.xml
[waiting for the server to complete its initialization...]
Fatal Error: Unable to write to the transaction log (/D:/MC/oajdev/jdevhome/jdev/system9.0.3.5.1312/oc4j-config/log/transaction.state), possible reasons for this are that Orion lacks permission to write to the file, or that another instance of the server is already running with this configuration (most common): Unable to alter transaction log
Process exited with exit code 1.

You have other JDev session running.
Probably your first JDev session was not terminated gracefully.
Close ALL JDev sessions. Go to Task Manager and kill any process related to JDev.
Then open JDev again. You should not get this error message again.
PS. Despite of this message, you will be able to continue with your work.

Port forwarding error in WRT54GL setup

ok so Im not understanding this. opened some ports in the port forward menu of my router and everything works fine. then all of a sudden my game, or whatever im using (bittorrent), wont work anymore, like the port isnt open. i go to the port forward setup in my router settings and some of the boxes will be yellow. I cant get rid of the yellow boxes, nor do i know what it means. the only way ive found that works to get rid of them is to format my pc. i really, really do not want to format it again, i just did it like 10 hours ago >. anyone know what these yellow boxes mean and how to fix them. any help would be greatly appreciated.
thanks!

What is the model # of your router and have you tried it on another computer to check if you'll have same yellow box on the port forwarding tab???

Port 3689 errors when ATV tries to sync purchases to MacBookPro

I have purchased a couple of TV series and they are available on ATV.
They show up as needing to be uploaded to the MacBook Pro.
When I open iTunes it begins to upload but nothing uploads after a few hours.
The graph appears but never leaves the home spot.
When I manually tell it to sync the TV shows I get this message.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The Apple TV is not responding.
Check that any firewall software running on this computer
has been set to allow communication on port 3689.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I have no idea where to look for the above.
I want the series backed up on the computer but it does not get
there. I have good communications on the ATV to iTunes, etc.
The computer sees that there is something to
acquire from the ATV but will not complete properly.
Harold

Thanks for responding Winston,
I did restart the ATV and no help.
I also keep my system up to date with newest software and also repair permissions regularly.
It uploaded a few episodes of the selected TV series but then quit doing so.
I am not sure but I believe I upgraded the ATV software in between.
Harold

Error when listening on port 80 for weblogic 6.1 on AIX

I setup weblogic 6.1 on AIX 4.3. I configured weblogic to listen on port 80. When
I start weblogic as a non-privilege user(not using root) the weblogic report the
error as following:
<Dec 12, 2001 1:31:46 PM CST> <Emergency> <WebLogicServer> <Unable to create a
s
erver socket for port: 80. java.net.BindException: The file access permissions
do not allow the specified action. Perhaps another process is using port 80.>
But when I login as root, startweblogic didn't report the error.
Who can help me?
Thanks.

Hello,
Port numbers less than 1024 are only accessible to
root.
You may be able to work around this by creating a start script
owned by root with the setuid bit on. That way your
non-privilege account could execute the script and
run the server as root.
Hope this helps.
"zhenglee" <[email protected]> wrote:
>
I setup weblogic 6.1 on AIX 4.3. I configured weblogic to listen on port
80. When
I start weblogic as a non-privilege user(not using root) the weblogic
report the
error as following:
<Dec 12, 2001 1:31:46 PM CST> <Emergency> <WebLogicServer> <Unable to
create a
s
erver socket for port: 80. java.net.BindException: The file access permissions
do not allow the specified action. Perhaps another process is using port
80.>
But when I login as root, startweblogic didn't report the error.
Who can help me?
Thanks.

I tried downloading the iOS8 to my iPod 5th generation and when it finished downloading it shut down completely and it said there was an error and no the iPod is in recovery mode. What can I do to restore it and update it? Please, I need help.

Hello,
I recently tried downloading the IOS8 to my iPod 5th generation and when it was almost done the computer said there was an error. Right after that, the iPod shut down completely and now it's on recovery mode. I plugged it in and it said that I had to restore it and update it so I could use it again but it doesn't let me. What can I do? I even did a backup before the update.
I really need help.

What happens when you connect to computer and restore via iTunes?
Without knowing that:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

TS3297 My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings" I am on a secure networ

My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings" I am on a secure networkl.

Can't connect to the iTunes Store
Make sure that time zone is correct in addition to date and time

Port generation error when ALE setup

Similar Messages

Maybe you are looking for