Portal9i : Inoperative after 9iAS Rel2 install

After I supposedly installed and patched 9iAS Rel2, I cannot get Portal to work at all. I can't control it via EM nor can I access it via the url http://<host.domain>:7778/pls/portal. I also cannot control Forms, Discover nor Reports via EM But main concern at this time is Portal.
I response to a related EM page problem, I was told by Pavna Jain (9iAS Product Management) that :
In order to use EM to manage Portal, you need to apply the workaround suggested in the Portal release notes.
Forms can be managed only by Oracle Management Server (OMS) that is part of Oracle9iAS Infrastructure.
I've looked and looked by can't find the workaround discussion talked about. And if I could access Portal I wouldn't neccesarily care about the EM-control of it.
Anyone with Portal9i working know what's going on. The user/schema portal exists in the metadata database (on same host).

Gary,
For Portal specific issues, you might have better luck trying the Portal discussion forums. Portal Product Managers monitor those mail lists. Have you tried one of them?
Thanks,
Ashesh Parekh
Oracle9iAS Product Management

Similar Messages

Odisrvmgr problems : 9iAS Rel2 install / patch

Trying to run through the hundred of steps listed in 9iAS Rel2 Interoperability patch (for infrastructure instance). An OiD patch says I need to
> oidmon start
> oidctl server=oidldapd instance=1 start
> odisrvreg -h <host> -p <oid_port> -D "cn=orcladmin" -w superuser_pswd
For the odisrvreg stuff, I entered
> odisrvreg -h host.domain -p 4032 -D "cn=orcladmin" -w welcome
after spending an hour looking for superuser pswd and finding post in this forum that says it is welcome.
All I get is a message saying LDAP Connection Failed.
- Is welcome the real default pswd for oid superuser (which why didn't it specify password in install docs)
- Is 4032 the correct default port. portlist file say that it is for Non-SSL. If I specify 4031 then command just never returns control at all.
- what is this doing and supposed to do
Thanks for any help.

I don't know anything about 9iAS interoperability with ldap, but I can tell you a few things about the LDAP server:
try specifying connect=<net_service_name> in your oid commands, with <net_service_name> being the service name of your database.
Sth like:
oidmon connect=mydb start(this should return a message that the monitor actually started, on some platforms that doesn't happen if you don't specify the connect parameter)
oidctl connect=mydb server=oidldapd instance=1 start If you didn't change anything about your ldap configuration, this starts an ldap server instance at port 389. You could verify this by using netstat (netstat -ln on linux). Maybe you should also check if there's no other ldap service listening at that port before you enter the oidctl command. If that would be the case, maybe you should shut down the other ldap temporarily.
Since the default port is 389, this means you should use the following:
odisrvreg -h host.domain -p 389 -D "cn=orcladmin" -w welcome The default superuser username/passwords are indeed correct.

Has anyone installed CM SDK into 9iAS rel2 90201 middle tier?

Hi all,
I have to install CM SDK into 9iAS rel2 90201 on solaris. We have a functioning environment (middle tier and infrastructure on the same machine). Has anyone done this? Any problems? Gotchas?
Thanks in advance!
Tracie

Installed CM SDK into 9iAS 2 and Oracle 9i on the same machine (not using Infrastructure). Had problems with CM SDk configuration. Finally setup the server, but cannot figure out how to login as a regular user. Looked all over for the user guide and found none existing.

Patch for 9ias Rel2 for windows 2000

Hi,
Are there any patches to be applied after installing 9iAS Rel2. The installation done is BI+tools.
Software downloaded from OTN 2 weeks ago
OS:windows 2000
Thanks
srinath

No, no patches need to be applied.
Thanks,
Ashesh Parekh
Oracle9iAS Product Management

Installation problem of Oracle 9iAS rel2 on redhat advanced server 2.1

Hi,
I am trying to install Oracle 9ias Rel2 on redhat advanced server 2.1
Following instructions i downloaded and installed the binutils patch binutils-2.11.90.0.8-13.i386.rpm
I have set ORACLE_HOME appropriately and created a new user oracle.
During installtion of 'J2EE and WebCache' , when it starts linking, the installer gives the following error
Error in invoking target ntcontab.o of makefile /home/oracle/Appserver/network/lib/ins_net_client.mk
Retry, Ignore,cancel...
If i press ignore, it gives series of such errors.
My ORACLE_HOME is /home/oracle/Appserver/
I am trying to set up the production environment.
Please help!!!
thanks
srinath

Check out Metalink Note:191567.1
(http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=191567.1)
Step 11.
11. Error in invoking target relink of makefile
/home/ias/infrastructure/precomp/lib/ins_precomp.mk
To fix it:
As ias go to $ORACLE_HOME/bin
vi genclntsh
change line LD_SELF_CONTAINED="-z defs" to LD_SELF_CONTAINED="" (line 147 of 200)
save genclntsh file
./genclntsh
Created /home/ias/infrastructure/lib/libclntst9.a
Click "Retry" at error popup window. Installer will continue.
Link successful.

Zen 4GB inoperable after MP3 Recovery Tool

*Zen 4GB inoperable after MP3 Recovery Tool' I was getting the intermittent white screen problem with my Zen 4GB. Tech support instructed me to use the MP3 Recovery Tool. After running the tool, the player is inoperable. It turns on, but the screen is always white or gray and no interface is displayed. The blue light near the power switch turns on. Reset does not help. After running the recovery tool a 3rd time, Creative Zen Media Explorer recognizes the player when connected, and I can browse the media that is installed. I couldn?t even do that on the first two tries. Currently I am unable to play any files because I don?t have a user interface to navigate.
The support email instructed me to create an online RMA if the recovery tool did not work. I have attempted this numerous times and always receive a message that there is an error. No specifics. I tried replying to the original support email, but got no response. I tried sending a new email through the support website several times, but don?t even receive the automated response. It is not showing up in my email service?s spam folder. I have received no reply for the past several weeks, but I wonder if they are actually receiving my messages.
Any suggestions? My warrantee runs out in about a month and I want to get this resolved while it is still possible.
Technicals: Windows XP Media Edition, SP3; Creative Media Explorer v5.70.5; Windows Media Player .

Hello Buckaroobonzai,
Welcome to Creative forums!
This doesn't look good. White screen is a symptom of a hardware problem. I suggest you contact tech support by phone as soon as possible before your warranty expires. Check your PM.

Itunes wont open after trying to install 11.1.4??

iTunes will not open after trying to install 11.1.4 version ??

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

After trying to install update on MacAir error message and then message saying panic (cpu caller 0xffffff800a859241): "Unable to find driver for this platform: \"ACPI\".... I'm worried as all of my work is on my computer and I'm afraid I will lose it all.

I am totally worried I am going ot lose all my data after trying to install update on MacAir. Cannot do anything error message saying panic ....."Unablet o find driver for this platform."

Hi Guys
No good news I'm afraid. I have been through ALL the system caches and files that were updated at the time of said issue. Reset - rebuild and even gone back to my TimeMachine copy from earlier this AM. Nothing! Can only assume it is something deeper in the /usr or var or private folders.....
I have cloned the system and core files (/usr, /private) etc etc to an external HD and it still recreates the fault. I am afraid to say I have no more time at the minute to look at so have put my machine back to 2 hours prior via my TimeCapsule.
I the absense of anyone else or, indeed, Apple fixing in the next 12 hours, will get back onto it from the cloned copy I have kept and see if I can find the offending file/files...
Sorry I don't have an immedaite solution.

After a clean install, how can I continue using Time Machine?

After a clean install, how can I continue using Time Machine?
I booted from my recovery partition, erased my HD, installed the same OS, (Lion, 10.7.5) then restored from my TM.
If it asks if i want to use TM, I say yes. When I chose the drive, it seems to want to start all over, instead of just picking up where I left off.
Is there any way of picking up where I left off?

Hi Frank,
You are sure you looking in your Library in /Users/YOUR_USERNAME/Library and not /Library at the top level of your harddrive?
When you open iCal what do you see? Are the calendars the two default Home and Work ones?
I really appreciate the responses -- especially if you are in the UK as opposed to Ontario.
Why, do you have something against London Ontario?
John M

How can i gain access to my data on a Time Capsule after a fresh install of Mavericks? I can't access any backups through Time Machine... They appear purple/transparent, and I can't even select them to view their contents. PLEASE HELP!!!

So, I've got several thousand photos, and a decent amount of videos of my daughter, along with a lot of stuff for work stored on my Time Capsule, and now I can't access any of it. I did a fresh install of Mavericks on my MacBook Pro last week sometime, and haven't been able to figure out how to get my files back. Please Help!!! My daughter is 2 and a half, and every picture/video I have of her is locked on this thing. I was planning on making some photo/video projects fo my wife for Christmas, and now I'm definitely not going to be able to pull it off. Her birthday is at the end of January, though, so if I could have it by then, that would rule!
Basically, the bar on the right of the screen has some gray dates, which I can access (all backups after the Mavericks install), and purple dates that go all the way back to March (when I originally purchased and began using the TC) which deny me access/viewing. It's possible that I created a slightly different user name when I reset my MacBook, which I guess is most likely the cause, but I have no idea what to do now to correct it. Thanks for taking the time!

Mavericks does really nasty stuff..
Try manually mounting the sparsebundle and extract the files you want.
Yet another Pondini reference. http://pondini.org/TM/15.html
We have avoided Mavericks you see knowing that it would cause these kinds of issues..
You never ever load a new OS without doing a disk image beforehand.. TM is not reliable enough or trustworthy to be depended on.
If none of the above work..
I would get a USB drive on the computer and install Mountain Lion or whatever OS you had before you unfortunately upgraded to Mavericks.. Then use TM from that decent installation but mount the sparsebundle and choose the backup from a date well before mavericks was installed.
Once you have extracted the files.. or even done a full restore you might be able to extract the files you want.

Error 7 windows error 126 after trying to install the latest update

error 7 windows error 126 after trying to install the latest update

See Here
Unable to Update or Restore
http://support.apple.com/kb/HT1808
If the device has been modified, this will not necessarily work.

Issues solved after a second install of Belle

Hi.
I have been advised to reinstall Belle on my Nokia E7.
I've been told that after a second install of Belle most issues are gone.
Do you know what specific issues are solved after that reinstall?
I'm curious because I want to know if it is worthy to reinstall Belle.
Greetings from Paraguay.
Claudio Bogado Pompa.
Greetings from Paraguay.
Claudio Bogado Pompa.
Solved!
Go to Solution.

Claudio,
I upgraded from Anna to Belle on the first day that Belle was available. Yesterday I re-installed Belle.
Since updating my E7 from Anna to Belle I have had mixed opinions as to whether that was wise to do.
Though Belle has a lot to like about it in features and speed, there are many things that were really good in Anna but have been degraded or are even missing in Belle. See this list which many people have contributed to:
/t5/Software-Updates/List-of-Belle-additions-corrections-needed/td-p/1328167/page/3
I have customized the home screens (use three) quite a bit and have added a number of free apps for more convenience in use of the phone.
Before I tell you my experiences and give you my reasoning I should give some background about myself and my Nokia E7-00. Note that though I am very competent with computer hardware and software I have much less knowledge and skill with cell phones.
My E7-00 is my second Nokia phone experience. I also bought an E6-00 for my wife. I got the E7 for myself because I need the large keyboard for my large fingers and I like the GPS/maps capability. I got the E6 for my wife because she was unhappy with the touch screen on her Nokia 5230 and is more comfortable with a keyboard.
I have owned my E7 for less than a year, use it primarily for my small business, and upgraded to Anna immediately after purchasing it. Though I tested using a data connection for WEB browsing for a couple of months I don't subscribe to a data service now because I found little use for it and it is (in my opinion) very expensive here in Canada. I do connect my E7 to the Internet often using WIFI through my home or business routers, and occasionally through WIFI connections at hotels and other locations when I travel.
Since upgrading to Belle I have had many occasions when my phone would freeze either momentarily or permanently (necessitating powering it off) and a few times it has completely shut off for no reason. I have had a number of occasions when I have been unable to answer an incoming call because the touch screen was unresponsive.
In trying to determine the cause of the problems with the phone I have removed apps and done soft resets of the phone.
I thought about re-installing Belle but was loath to do it because of the bad experience I had when I first upgraded from Anna to Belle. At that time I did a backup of my phone using the latest version of Nokia Suite. The download and install of the Belle update went very smoothly. But once the phone was functional again I found that I lost many things including all my customizations, my WIFI settings, and all the many map favorites (GPS coordinates) I had collected when traveling and calling on customers. The backup that the Belle installation software performed did not restore these things, and the same was true of the backup I did with Nokia Suite.
Yesterday my frustration level with the phone was such that I decided I had to try a re-install of Belle. I did another backup up the phone with Nokia Suite and synced the map favorites with Nokia's on-line service. But I also had the inspiration to download the latest version of Nokia PC Suite and do a backup with that too - a good thing I did!
I used Nokia Suite to re-install Belle. After the reinstall I again had lost all my customization, some installed apps, and all map favorites. I tried to restore things by using the backup I had done with Nokia Suite, but that did not work.
Then I restored the backup I made with Nokia PC Suite and EVERYTHING was back. I could hardly believe my good fortune. Even my map favorites were back.
Since it is little more than 24 hours since my re-install of Belle I cannot say whether it was really worth the effort. But so far the phone does seem to be behaving itself. It is a little smoother in operation with less delay and I have not had any freezing. On the other hand it has been a quiet day and the phone has not had a good workout. Still, I am hopeful.
This most recent experience makes me wonder if Nokia is making improvements in Belle without giving notification. I am wondering if the version of Belle that was used for the re-install is different from the original version I installed about a month ago.
I will not upgrade my wife's E6 to Belle until I know that the problems with Belle have been fixed.
I hope you find this information useful.

After trying to install 6500 Wireless all-in-one on my 3rd comp, it ceased to work

While trying to install my (less than 2 year old) HP6500 Wireless all-in-one software on my 3rd networked computer, the software installation went into a loop and would not complete the installation. After about an hour or so of waiting, I physically had to unplug the printer & eject the CD. Upon doing so, the printer became next to useless. The printer key pad no longer functions except when I first plug it in, and I can no longer access it from the other 2 original computers, even with USB. The HP solution center says it’s on line, until I go to print via USB, then it says it’s offline. I can hook the USB up on the Widows 7 unit and force it to print Word Office documents, but when I try to print documents on it from either Internet Explorer or Fire Fox it wants to send a Fax??? I've uninstalled and reinstalled the software 3 times on my Windows 7 unit now to no avail. Is it my printer, the printer Firmware or what? I have downloaded and run all the HP & Microsoft troubleshooting tools on the Windows 7 unit to no avail. However; HP downloads will not successfully complete on my XP unit. What should I do? Should I start over with a new wireless printer?
Totally Confuzed

Re: After trying to install 6500 Wireless all-in-one on my 3rd comp, it ceased to work
Ref: 02-23-2012 08:53 AM
12:38 AM 2/24/2012 UPDATE ON WHAT I HAVE TRIED AGAIN:
1. Power Reset on the Printer: Power off the printer. Unplug the power cable from the back of the unit. Wait 60 seconds. Replug the power cable to the printer and power it on. DONE
2. Print a test page: Follow this document to print the test page. PRINTER SCREEN SAYS IT'S PRINTING AND THE POWER LIGHT IS FLASHING LIKE IT'S BUSY, BUT NOTHING IS HAPPENING. ONLY WAY TO USE IT NOW IS TO UNPLUG IT AND START OVER. THIS HAPPENS ALL THE TIME NOW. IT WILL NOT PRINT TEST REPORTS.
3. Create a copy of the printed test page. CANNOT DO NOW - (PRINTER FREEZES UP WITH A BLINKING POWER LIGHT)
4. Print the Wireless Network Test Report (To check if there are any errors) CANNOT DO
Press the Setup button ( ). DOESN'T WORK EXCEPT MOMENTARILY...NOT LONG ENOUGH TO MAKE A SELECTION BEFORE IT HANGS AND FREEZES UP...
Press the Right Arrow button ( ) to select Network Setup, and then press the OK button. CAN'T GET IT TO DO ANYTHING PRESSING THE OK BUTTON.
Press the Right Arrow button ( ) to select Wireless Network Test , and then press the OK button. The Wireless Network Test Report prints. CAN'T GET IT TO DO ANYTHING PRESSING THE OK BUTTON.
If you did not encounter any errors while performing the steps above then I think the hardware is OK. Test the software next. Let's use Windows 7 as the test platform. I DON'T THINK THE HARDWARE IS OK.
1. Download the driver from HP.com. Once it gives you the option to either Run or Save make sure to select Save and then select Desktop as the target location where it will save the file. This is just to make it easier to find it. Once it finishes downloading the file, double click it to initiate the installation process. Follow the on screen instructions until you reach the "select how you want to connect the printer" window comes up. I ALREADY HAVE 3 COPIES ON MY DESKTOP & NONE OF THEM REACT ANY DIFFERENTLY.
2. At the "select how you want to connect the printer" window select USB and then click Next (I think there is a next button). It should asks you to connect your printer but we are NOT going to do that. Place a checkmark on the option on the bottom of the window that gives you the option to bypass the connection phase of the installation. Click Next to proceed. Once the the installation process completes, restart your computer. I HAVE DONE IT BOTH WAYS BEFORE AND CANNOT GET THE INSTALLATION TO COMPLETE ON ANY OF THE 3 COMPUTERS NOW.
If you did not encounter any errors at this point then it looks like the software installation process is good. Proceed to the next test. END OF TEST FOR TONIGHT. THANKS
1. After the computer completely boots up, connect the USB cable to the printer and to the computer. The computer should detect the printer and initiate the HP installation process for it. Follow the onscreen instructions to complete the install.
2. Try printing to test functionality.

HP Photosmart C6300 printer/scanner not working after Snow Leopard install

HP Photosmart C6300 printer/scanner not working after Snow Leopard install
Reinstalling etc does not work - does anyone else have the same problem or a clue as to how to fix this?

Keith,
I got a C6280 and the scanner does not work anymore. I am for 6 days in contact with HP. The last printer driver install form the apple web site does not open the image of HewlettPackardPrinterDrivers.dmg because of an invalid checksum. The skipping of the validation gives and error in the install.

I have Adobe Acrobat 9 Standard on both of my computers. Some time ago, one crashed my computer and I had to reinstall the operating system and all applications. After I had installed once Acrobat 9 Sdt in the computer, I wanted to update the software v

I have Adobe Acrobat 9 Standard on both of my computers.
Some time ago, one crashed my computer and I had to reinstall the operating system and all applications.
After I had installed once Acrobat 9 Sdt in the computer, I wanted to update the software version 9.0.0 update to the same level as it was before the crash and that the other computer has version named 9.5.5.
The system for update from version 9.0.0 does not work at all. "There are no updates" listed in the dialog.
Can you advise how I get my Adobo Acrobat 9 Standard (Version 9.0.0) could be updated to the same level as the computer had before the crash.

ftp://ftp.adobe.com/pub/adobe/acrobat/win/9.x/

Portal9i : Inoperative after 9iAS Rel2 install

Similar Messages

Maybe you are looking for