Possibillities to free references to libraries from SAPLogon.exe?

Hello community,
I have the following problem:
In an ABAP code I load the Java Virtual Machine (JVM). I create a VM and after processing of a Java function, via Java Native Interface (JNI), I destroy the JVM and unload the JVM library again. All works well - but only one time. If I start the same code again, I get an error - I can not create the JVM. I communicate with the JVM via an ActiveX module. The analyzing process shows that SAPLogon.exe do not frees the references to the libraries. Is there any way to frees resources from SAPLogon.exe? Maybe via the garbage collector?
Thanks for tips.
Cheers
Stefan

Hi StSchnell,
Maybe Calling the Garbage Collector explicitly solve the problem. You can try:
[Note 580871 - Calling the Garbage Collector explicitly|https://service.sap.com/sap/support/notes/580871]
Regards,
Bruno Xavier.

Similar Messages

I have an iMac 2013 running OSX 10.9.4. I want to use Carbon Copy Cloner to backup user files to an external hard drive. Then I want to remove iPhoto libraries from iMac. What will happen to the iPhoto libraries that I back up when I run backup in a

I have an iMac 2013 running OSX 10.9.4. I want to use Carbon Copy Cloner to backup user files to an external hard drive to free up space on my iMack Hard drive.
So, say I make the backup today, delete iphoto libraries from my iMac, and then backup my iMac in a week. What happens to the iphoto libraries that are on the external backup drive now that I am backing up the iMac where they no longer exist?
I will have them backed up to a separate second external drive as well.
I'm just very cautious about removing them from the hard drive.
Thanks for helping and understanding my crazy caution!

I'd like to store my Aperture /IMovie Libraries on an external hard drive.
That is fine and recommended.. use the fastest disk you can afford.. ie Thunderbolt>USB3>FW800>USB2.
In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the external library drives.
Let me be clear.. you want to partition the one disk.. use it for TM and move your files to the external disk.. and then backup to the same disk.. You can do it.. but that is not a backup.. that is an experiment in how long you can get away with running files and backups on the same disk before you lose everything.. like Russian Roulette.. pull the trigger enough times and laws of probability will do you in.
You must have backups on a different disk .. otherwise it is pointless.
Can I set up a RAID 5 format for redundancy?
No.. you can buy special USB and Thunderbolt external drives that support RAID..
BUT that is still not a backup.. let me show why.. you make a silly move and corrupt your file in aperture.. it is not that rare.
Raid will corrupt all copies of the files.. it is replicated across all disks.
Delete a photo it is deleted across all disks.. you have no recovery.
Alway, always consider RAID system one disk.. backup onto another disk.. and if the photos or movies are at all important to you.. ie your family .. make another copy and store in a relatives house.. There is no such thing as too much redundancy.

Deployment: Deploying external libraries from dependent projects

Hi,
i need some help for the following issue.
How do I deploy external libraries from dependent projects? I have one project for the model layer which references TopLink JPA library and an other project for view/controller based on JSF/ADF Faces. The view/controller project has the model project as dependency.
For the view/controller project i have created a WAR deployment profile. On deployment all classes and referenced libraries from view/controller project and all classes from model project were included. But not the referenced library for TopLink JPA.
My second approach was to create a JAR deployment profile for the model project. Again the referenced library for TopLink JPA was not included.
My third approach was to add a library file group to the JAR deployment profile. I tried to add the library to jar's root and to META-INF directory. But the application don't find the library (java.lang.NoClassDefFoundError).
The only way I got this running was adding all referenced libraries from dependent projects to the view/controller project which couldn't be the proper solution.
So how do I get this running? What are the best practices?
I would be glad to get some input on these issue. Thank you.
PS:
I'm using JDeveloper 10.1.3.2 and like to deploy on Tomcat 5.5.23.

I see your points.
Unless you have Java EE 5 there is no real standard way of including libraries in EAR files. Including the libs in the WAR files is the only standard supported way for file formats prior to Java EE 5. If you have to consider Tomcat as a possible platform, WAR files are your only option.
You reluctance to include the libs in the WEB-INF/libs structure is understandable but think of injected dependencies in the Entities you're not aware of. These might be needed in the view layer too.
--olaf

RE: How do I access deployed TOOL libraries from mycode?

Hi Martin,
sorry for the late answer but I hope it is still helpful.
First: In the workspace you make your distribution from, check whether
you really have library icons.
Second: Make the distribution and run it from the partition workshop.
Startup should fail when you do not have the libraries installed. If you
install them later and you can run that distribution then, you can be
sure that you use your library.
Third: Sometimes it is difficult to import the library pex-file into
your workspace when there are already plans with that name. To overwrite
them you can use a traceflag (cfg:c4:14:14:1). But take care! this will
overwrite!!! Do not overwrite them before you put your libraries sources
into another repos. If you did it by accident, at least do not integrate
until you saved the original code.
Hope this helps. If you have more question please feel free to contact
me.
Uli
Ulrich Beutenmüller
TechnoData GmbH
Germany
-----Original Message-----
From: Martin G Nystrom [SMTP:[email protected]]
Sent: Thursday, October 15, 1998 12:56 PM
To: [email protected]
Subject: Re: How do I access deployed TOOL libraries from my
code?
Excellent! Now can I be sure that my client application is using the
deployed
library, not bundling its own when I distribute the application?
-Martin
Karoly <[email protected]> on 10/14/98 05:55:43 PM
To: Martin G Nystrom/AM/LLY
cc:
Subject: Re: How do I access deployed TOOL libraries from my code?
Martin,
Here is how it works:
When you create a library distribution, part of the result is a
'Library
Definition' pex file (located under the 'appdist') like this:
C:\forte\appdist\EnvName\LibName\cl0\generic\LibName\LibName.pex
You would import this pex file into a workspace, after which it
would
appear
as any other Forte library.
Once integrated, the library can used by other plans as a supplier
(remember
to 'install' the library from E-Console).
Hope this helps,
Karoly Kojnok
Martin G Nystrom wrote:
We have a lot of plans that contain "business objects" that ourclient
applications share. I'd like to deploy these plans as TOOLlibraries (not
compiled) and then have my deployed applications use them. Myquestion is:
How do I access the library?
Some possible answers:
1) Just include it as a supplier plan, it will automatically use thedeployed
TOOL library
2) You have to programmatically load it using task.part.findLibrary
3) The help says I can "import it into my repository" -- how do I dothat?
-Martin
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Excellent! Now can I be sure that my client application is using the deployed
library, not bundling its own when I distribute the application?
-Martin
Karoly <[email protected]> on 10/14/98 05:55:43 PM
To: Martin G Nystrom/AM/LLY
cc:
Subject: Re: How do I access deployed TOOL libraries from my code?
Martin,
Here is how it works:
When you create a library distribution, part of the result is a 'Library
Definition' pex file (located under the 'appdist') like this:
C:\forte\appdist\EnvName\LibName\cl0\generic\LibName\LibName.pex
You would import this pex file into a workspace, after which it would
appear
as any other Forte library.
Once integrated, the library can used by other plans as a supplier
(remember
to 'install' the library from E-Console).
Hope this helps,
Karoly Kojnok
Martin G Nystrom wrote:
We have a lot of plans that contain "business objects" that our client
applications share. I'd like to deploy these plans as TOOL libraries (not
compiled) and then have my deployed applications use them. My question is:
How do I access the library?
Some possible answers:
1) Just include it as a supplier plan, it will automatically use thedeployed
TOOL library
2) You have to programmatically load it using task.part.findLibrary
3) The help says I can "import it into my repository" -- how do I do that?
-Martin
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Disappearing referenced libraries from NWDS

I have installed NWDS 7.1 SP11 and I referenced SAP system library (Variable SAP_SYSTEM_ADD_LIBS) in my project's build path... whenever I close and re-open the IDE, the referenced libraries are gone from package explorer and I get compilation error.
SAP_SYSTEM_ADD_LIBS remains on Libraries tab of my build path though.. I have to perform the Add Variable step again to reference the libraries... Am I missing something?

Hello
We will move this thread to the [Java Programming |Java Development;forum. Hopefully you will get a better response on that forum.
Regards
XI/PI Moderator

I am traveling with my macbook pro and I forgot to install final cut express and quicktime pro before I left. How can I in a way download them for free on my laptop from where I am

I am traveling with my macbook pro and I forgot to install final cut express and quicktime pro before I left. How can I in a way download them for free on my laptop from where I am? I need them and don't want naturally to buy them again!!!
Thank you

Assuming you purchased QT Pro, you can always download it again at no extra charge by logging in to your Apple account.
Regarding FCE, there is no way to download & install the product. You need an original FCE install disk and your FCE serial number.
Final Cut Pro X (aka FCPX) can be purchased & downloaded from the App Store.

Could not load file or assembly 'log4net, Version=1.2.10.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040

Please assist I am on a Windows 7 64 bit machine I have VS 2010 and have been fighting with this new program that I was brought on to help with - Issue is that I am unable to get rid of this issue. There is so many solutions but none have worked. If someone can give me some help with what has worked for you.
The error is Could not load file or assembly 'log4net, Version=1.2.10.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
This is with CR installed on 64 bit.
Thank you very much for any assistance with this problem,
Kris

Hi Vittorio
Please enter the search string 'log4net crystal net' into the search box in the top right corner. When the results come up, click on the Support Notes link. That will filter for the KBAs that you want to have a look at.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

I downloaded a free App called ThaiPad from Bangkok Post newspaper. I downloaded on my PC running Windows 7. The Bangkok Post recommended itunes for downloading. I completed download but it would not open. I am assuming that perhaps this App. was for iPod

I downloaded a free App. called ThaiPad from Bangkok Post newswpapers. I downloaded on my PC running Windows 7. The Bangkok Post recommended itunes for downloading. I completed the download but it would not open. I assume that this App was for iPad or iPod etc as the Bangkok Post wants to sell content, after the free content, via itunes store I assume. Can someone tell me if I can open this in Windows 7 and if so how. Thanks.

Any app that you download using iTunes is for use only on iPad, iPhone, or iPod Touch, and not on a PC. It's possible they have a separate app for PC, as some companies do, but the one you downloaded via iTunes definitely will not open in Windows 7.
Message was edited by: ClayG

How do you combine 3 different itunes libraries from 3 different computers to one computer?

How do you combine 3 different itunes libraries from 3 different computers to 1 computer?
Can you keep it from creating duplicates? These libraries have some duplicates.
How do you deal with duplicates?
I'm talking 50GB.
All computers are authorized.
THANKS for any suggestions.

You can't.
If accounts could be merged, then everybody could merge their accounts with everybody and there would be no need for anyone to buy anything.

How to transfer an iphone's libraries from one pc to another one?

Hi all,
I used to synch my 3gs iphone using my laptop (xp window). However, this laptop currently had started having problem with its hard drive so I decided to use another laptop (window 7) for synching my iphone in the future.
I really do not want to re-create its libraries from scratch. So how can I transfer its libraries from the old laptop to the new one and get they synched with my iphone just like they are with the old laptop? Your help will be great appreciated. Thanks in advance.

http://support.apple.com/kb/HT1751

How to hide libraries from breadcrumb in SharePoint 2013?

Hi,
How to hide libraries from breadcrumb in SharePoint 2013? just we want to display parent and least node like below,
Home Site > Test page
not like,
Home Site > Pages > Test page
Please help us to resolve this.
Thanks., Prakash

hi
OTB breadcrumb have many problems, e.g. it doesn't work properly also with friendly urls. The simplest way is to create custom breadcrumb, e.g. as shown here:
Building breadcrumbs the way you want it in SharePoint 2010.
Blog - http://sadomovalex.blogspot.com
Dynamic CAML queries via C# - http://camlex.codeplex.com

Any way to restore iTunes and iPhoto libraries from failed Time Machine backup?

Is there a way to restore iTunes and iPhoto libraries from an unmountable Time Machine backup?
Background: I received an update alert on my iMac (mid-2010, 1TB) from Time Machine (wirelessly connected to a Time Capsule, 2TB 2013) that it required an update and required rebooting, of course, it happened when I was in the middle of a project and I postponed the restart for later. That evening I turned off the computer and coincidentally the next morning, the iMac would not start; it loaded to the Apple logo and about an 1/8 of the progress bar would load before the iMac would turn off.
The iMac had been fine to that day (OS upgrades and all since 2010) so I was assuming something misfired when I declined the Time Machine update. I tried the PRAM and SMC resets mentioned in the forums but no dice. I then went into Disk Utility to try repairs and there were errors on the hard drive that could not be fixed. My next step was to erase the drive and restore from my Time Machine backup. Before doing that I checked Disk Utility and to my horror, it told me that my Time Machine backups were unmountable so of course my first thought was that all my files were gone.
The TC was under warranty so I called support and they referred me to the local Genius Bar. The Genius was great and showed me that my files weren't lost even though the Time Machine backup was unmountable. They recommended I erase the partitions, starting from scratch and I would have to transfer the Time Machine backup files manually by directly connecting an ethernet cable from the TC to the computer. If that didn't work, the hard drive was bad and needed replacement which they could take care of.
I followed their recommendation and the hard drive is fine. I was so relieved to hear that my files were safe that I forgot to ask about all of the metadata that was lost in iTunes (de-selected songs, playlists, rankings, play counts) and iPhoto (geotags, names, etc). Any ideas / help? I sank considerable time into my music and photos and would love to have that time back.
FWIW, I'm in the process of buying an external hard drive as a secondary backup to the TC as my confidence is a little shaken on the product line - the first time I ever actually need a backup and the backup is unmountable. My whole point of spending a little more and buying into the Apple ecosystem for a backup solution was to streamline the backup process and avoid these types of issues.

Thank you for the reply. I tried the Disk Utility to repair my TC's Time Machine backup disk with no luck, it stopped with the message:
Disk utility stopped repairing "iMac"
Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
It took a night but I was able to copy all the TC Time Machine files to the external hard drive as a backup to a backup just in case. I'm still pretty bummed the TC's backup didn't allow for Disk Utility's restore functionality. Fortunately, the iPhoto library backup I dragged to the iMac from the Time Capsule backup worked without a hitch. On the downside, the "iTunes Library.itl" backup I dragged over is locked so now I'm checking out the forums for any ways to fix that. I temporarily created a new iTunes library with all my apps and music but plan on reverting to the old iTunes library if possible so I can start syncing my iOS devices again.

Free issue of materials from customers .....

Experts pls help.
In one of our client projects, client receives the Free issue of materials from customers and consumes the same in the projcet and deliveries the end product.
How treat the free issue of materials in FICO , MM , SD,PM modules during the config?

hi
pradeep
In the senario first u will get the material from the vendor as a non valuvated material this is MM part wher they will update this material as anon valuvated material .
(material will be upadated in material ledger)
after that it will go for plant for production purpose WHER PP CONSULTANT will run MRP and maintain BOM and as a FICO consultant u have to run costing run FOR THAT
AFTER all the costing run u have to update the price in material finished good.
after that SD pepole will maintain the pricing procedure before delivering the good to customer wher they will menstion profit margin based on condistions.
afetr that BILLING wher u will get all the accounting,pa doc, controlling documents.
the particular material wich u are using is anon valuvated material for our production of FG not for customer.

Where "Dependent Items Are Free of Charge" indicator from PO stored?

Hi,
Where "Dependent Items Are Free of Charge" indicator from PO stored. In ME23N transaction it is displaying k=like :
Data Element UMSON
Screen Field MEPO1211-UMSON
But in which database table this will be stored....Please let me know if any has idea...
Thanks
Venkatesh P

Oh My mistake...
It is in field /BEV1/NEDEPFREE...and table is EKPO in tcode SE16...
Pls check..
Regards
Priyanka.P

Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)

Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
===========================================================
This is a SQL Server 2012 Developer Edition of SSRS.
I am getting this error when navigating to http://servername/Reports. The reports site was working fine, until I installed a SQL 2014 Developer instance (including SSRS) on the same server.
I can still get to the http://servername/ReportServer site.
Neither of these are using Sharepoint.
Any help resolving this issue would be greatly appreciated.
Below is the stack trace.
===========================================================
[FileLoadException: Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)] System.Reflection.Assembly._nLoad(AssemblyName
fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) +0 System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity,
StackCrawlMark& stackMark, Boolean forIntrospection) +416 System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +166 System.Reflection.Assembly.Load(String
assemblyString) +35 System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +190 [ConfigurationErrorsException: Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel'
or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)] System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +1149
System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +323 System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +116 System.Web.Configuration.AssemblyInfo.get_AssemblyInternal() +36 System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection
compConfig) +212 System.Web.Compilation.WebDirectoryBatchCompiler..ctor(VirtualDirectory vdir) +174 System.Web.Compilation.BuildManager.BatchCompileWebDirectoryInternal(VirtualDirectory vdir, Boolean ignoreErrors) +57 System.Web.Compilation.BuildManager.CompileWebFile(VirtualPath
virtualPath) +295 System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) +482 System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext
context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) +108 System.Web.Compilation.BuildManager.GetVirtualPathObjectFactory(VirtualPath virtualPath, HttpContext context, Boolean allowCrossApp, Boolean
noAssert) +171 System.Web.Compilation.BuildManager.CreateInstanceFromVirtualPath(VirtualPath virtualPath, Type requiredBaseType, HttpContext context, Boolean allowCrossApp, Boolean noAssert) +52 System.Web.UI.PageHandlerFactory.GetHandlerHelper(HttpContext
context, String requestType, VirtualPath virtualPath, String physicalPath) +53 System.Web.HttpApplication.MapHttpHandler(HttpContext context, String requestType, VirtualPath path, String pathTranslated, Boolean useAppConfig) +519 System.Web.MapHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
+176 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +274
===========================================================

Hi Glen，
"The located assembly's manifest definition does not match the assembly reference." is generally caused by the loaded assembly's version is different than the expected version application refers to.
In this case, it should be caused by:
While starting Report Manager, the backend process ReportingServiceService need to load assemblies it refers to
ReportingServiceService reads the compilation/assemblies element from web.config(under Report Manager virtual patch)
If the compilation/assemblies is not existing, ReportingServiceService loads all assemblies from Bin folder. It can be verified from call stack System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory(). ReportingServiceService
uses System.Reflection.Assembly.Load with the assemblies' name only to load assemblies.
The Assembly.Load tries to load from the specify assembly by name from GAC at first. If it is found from GAC, it won't be loaded from Bin folder any more.
Since Reporting Service SharePoint Integration mode is installed, a same assembly of 'Microsoft.ReportingServices.SharePoint.ObjectModel' with different version might be installed to the GAC. That causes the error "The located assembly's manifest definition
does not match the assembly reference."
For more information about the error message and the loading process, please see:
http://blogs.msdn.com/b/junfeng/archive/2004/03/25/95826.aspx
https://msdn.microsoft.com/en-us/library/yx7xezcf(v=vs.100).aspx
Thanks,
Jinchun Chen

Possibillities to free references to libraries from SAPLogon.exe?

Similar Messages

Maybe you are looking for