Possible issue: multitouch interface/drag targets AIR 3.8.0.1430 Windows 8

Noticed an issue with touch interface when compiling using AIR SDK 3.8.0.1430 (latest SDK and testing using latest AIR Windows player-both 3.8.0.1430).
Testing on Windows 8 Pro desktop with full multitouch screen.
Touch fails to work using SWF compiled to AIR and played via latest Windows AIR player. (Mouse click drag works OK with AIR player; this issue only applies to touch/drag.)
Touch for drag targets works OK if using latest Windows 8 Flash player 11 to play same compiled SWF.
Leads me to think there may be a bug affecting touch when dragging an object (if compiled using latest AIR SDK and played back using latest AIR player on Windows 8 multi-touch screen).
(BTW same AS3 compiled as AIR Android APK plays back fine, including multitouch drag, when tested on Android JellyBean 4.3 tablet with latest AIR Android player.)
I noticed this AIR compiler/player issue learning scripting from: AS3 source code and source file-FLA-, plus tutorial, at http://www.emanueleferonato.com/2011/11/08/as3-version-of-nodes-engine-full-playable-game- with-infinite-solvable-levels/. (tested with mouse click as in this code, and also tested by adding multitouch classes and event handlers: made no difference.)
HTH

Could you please open a new bug report on this over at https://bugbase.adobe.com? When adding the bug, please include some sample code or a sample application so we can quickly test this out internally. If you'd like to keep this private, feel free to email the attachment to me directly ([email protected]).
Once added, please post back with the URL so that others effected can add their comments and votes and I'll also ask the team to investigate.
Thanks,
Chris

Similar Messages

Possible issues changing name of vlan interface

Hi
I will be making some changes to the way our ASA 5505 is configured over the next few weeks. It is used mainly for our phone VPN clients to connect to our internal CME. The issue is that I shall be changing the inside network to another vlan and another IP address, although the name will be staying the same. I know that this will remove all the config which uses that interface name, such as NAT translations etc but my main concern is that when I put them back in again with the same name it may confuse the ASA in some way and just not work.
Has anyone had any experience with this as I would really like to know possible issues before I get to them.
Thanks very much in advance
Jake Bowe

Hi Barbara, Glad you are around the Forums.
Will it confuse any Backups or Clones OP has made on say a FWHD?

HDCP display issue with Yosemite and Macbook air

Hi - Sorry if the question has been asked before and answered.
I have an issue where since I have upgraded to Yosemite, I cannot play any of the movies I bought prior to upgrading and I can even play trailer from the iTunes store...
Any ideas?
Thanks

Too bad this didn't help.
HDCP errors can also occur when your display settings are incorrect and when you have non-original / non-Apple display software installed. Think a special driver to support a specific type of external display, or a remote viewer application like TeamViewer or AirParrot.
If you're having the HDCP error with an external display, disconnect it and test with the MacBook Air's own display.
If the issue persists on the MacBook Air's own display:
To restore your display settings to factory default: do a PRAM reset:
http://support.apple.com/kb/PH14222?viewlocale=en_US
Shut down your Mac.
Locate the following keys on the keyboard: Option, Command (⌘), P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on your Mac.
Immediately press and hold the Option-Command-P-R keys. You must press this key combination before the gray screen appears.
Continue holding the keys down until your Mac restarts, and you hear the startup sound for the second time.
Release the keys.
If you have special software installed, it would be best to try to boot the computer to safe mode:
http://support.apple.com/kb/PH18760
Choose Apple menu > Shut Down.
After your Mac shuts down, wait 10 seconds, then press the power button.
Immediately after you hear the startup tone, hold down the Shift key.
You should press the Shift key as soon as possible after you hear the startup tone, but not before.
Release the Shift key when you see the gray Apple logo and progress indicator.
If that doesn't solve it, peruse your Applications folder in the Finder and see if you can delete unwanted video / viewing-related applications.

Font Anti-Aliasing Issues in HTML/Ajax based Air Applications

It seems that the font-renderer in HTML/Ajax based Air Applications is using some kind of sub-pixel font renderer that is overriding and vastly inferior to the standard Windows ClearType, or any Apple based option as well. This problem is particularly noticable with light text on a dark background, and made worse the smaller the text is. I've put together an example image explaining exactly what I mean at: http://regator.com/fontRendering.png (it's a large image 1126 x 1500 px)
My example shows two fonts at four different sizes rendered in an HTML Air App vs the default Windows Cleartype, as well as using Safari to show the Font style anti-aliasing. In all cases the HTML Air App rendering is far more difficult to read, and in many cases severely distorts the color of the text in a way that other subpixel algorithms do not. As far as I can find after literally hours of googling and searching there's no way to override this in HTML based applications. Is there any solution to this, or a planned fix for the renderer? Other than this rendering issue, the HTML interface for creating Air apps is absolutely brilliant, this is just making my finished product look significantly less polished than it otherwise would if the text were more readable.
Thanks.

Dear caturner81, dear Adobe,
is there a solution to this problem? I'd really love to fix the aliasing thing in Air/HTML!

Output xml file from data in a drag/drop AIR app.

I am interested in creating a WYSIWYG drag/drop AIR app. in
which I can drag art and other components, then export the (x,y)
positions of the components and other info into an xml file. I am
interested in using .ai files instead of raster based art. Will
Flex/AIR app. support this format? I am just starting to work with
Flash, Flex, etc. Is this way over my head? Possible?
Thanks,
Nate

I don't think you can manipulate .ai files in Flex /
AIR.

HT3131 Are there any ventilation issues with running a macbook air in clamshell mode?

Are there any ventilation issues with running a macbook air in clamshell mode?

...that makes sense to me.
but, why do so many MBA users (on this forum and others) claim that ventilation occurs through the keyboard? Is this claim based on an old macbook design?
for example, here's a related discussion (although fairly old):
11-08-2010, 12:16 PM
#6 (permalink)
SP Forsythe
Notebook Evangelist
Join Date: Jul 2007
Location: California
Posts: 660
Rep Power: 14
Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
Quote:
Originally Posted by tHE j0KER
Actually I you shouldn't close the lid while running on an external screen. The keyboard of the Macbook is an air intake for the fan. Close the lid, and it could overheat.
A common misconception of unknown origin. The intake and the exhaust for the cooling fan on the 13" MB and MBP are both located on the rear slot at the base of the hinge. In fact, you can actually see the divider that separates the intake flow from the output flow. If it were through the keyboard crevices, then an awful lot of overheats would result from people using impermeable keyboard covers, as well as Apple's warranty department would be flipping out over the Apple store carrying such covers. iSkin ProTouch FX Keyboard Cover for all MacBooks - Black Printed Keys on White - Apple Store (U.S.)
Does one think that Apple sells these only for use when the Notebook is off??? http://store.apple.com/us/product/TW...co=MTM3OTUwMDE Closing the lid, whilst operating the unit actually results in cooler operation due to reduction in power consumed by operating the display, which in supporting the on-board display generates heat far greater than simply powering the video port..
Does one think that Apple sells these for use only when the MacBook is off? http://store.apple.com/us/product/TW...co=MTM3OTUwMDEApples direction for use is specifically for when using with an external display.
Currently using:
Apple MacBook Air 13" mid 2011 1.8GHz Core i7 4GB 256 GB SSD Lion & Ubuntu Linux via Fusion
MacBook Air 11.6" late 2010 1.6 GHZ, 320M, 4GB 180 GB SSD Upgraded OWC), OS X Lion
11-08-2010, 02:34 PM
#7 (permalink)
ajreynol
Notebook Virtuoso
Join Date: Mar 2009
Location: Ann Arbor, MI
Posts: 2,542
Rep Power: 18
Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
once again, I've tried a few of these keyboard covers. the Moshi keyboard cover is the ONLY one I can recommend. the others are too thick or change the keyboard experience too much.
17" Apple MacBook Pro | i7 2720m | 160GB SSD + 750GB | 16GB | HD 6750M 1GB
Dell 435MT | i7 920 | 10GB RAM | 7.64TB HDDs | HD 6970 | Win7+SL
HP Elitebook 2710p Tablet PC | 1.8GHz C2D | 4GB RAM | 160GB HDD | X3100
Apple iPhone 4 32GB | Apple iPad 64GB (Gen 3)
Stop random laptop wakeup | 5K500.B bench data | How to Disable PowerMiser
Disable Vaio beep when pressing volume or special keys
11-08-2010, 03:34 PM
#8 (permalink)
doh123
Without ME its just AWESO
Join Date: Feb 2009
Posts: 3,282
Rep Power: 22
Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
1. Closing the cover will cause more heat. This is not because of covering the keyboard very much (though it does help some heat be retained). It's mainly because of the shape of the hinge and the fact when closed it covers up the back vent a lot more. For the best cooling, it is best to have the screen open. Just run it as a dual monitor, but make the external the Primary monitor, and if you don't want to use the built in, just turn its backlight off and don't use it.
2. The thing you plug into the wall is not a battery charger. The actual "charger" is built into the computer. It knows when to charge and when not to. If the little light on the power plug is amber, then its charging your battery. When its green, its just powering the laptop and NOT charging your battery at all.
Mac OS X Gamer/Porter
(We do exist!)
Wineskin 2.5 is available!. Turn Windows apps into Mac apps for free!
11-08-2010, 03:38 PM
#9 (permalink)
Wolfpup
Notebook Virtuoso
Join Date: Jun 2007
Posts: 3,871
Rep Power: 28
Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
I'd leave the lid open, at least partially...yes it may be fine not doing that, but you are making heat dissipate worse, of course could even theoretically hurt the screen.
As for the battery...well there's really only two choices, have it plugged in or not. As others mentioned, you can't overcharge the battery. It can be damaged a bit from heat, but of course the number one thing that's going to damage it is discharging it...so it's a no brainer-use it plugged in whenever possible, and try to charge it whenever possible when it's not plugged in.
11-08-2010, 03:45 PM
#10 (permalink)
SP Forsythe
Notebook Evangelist
Join Date: Jul 2007
Location: California
Posts: 660
Rep Power: 14
Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
Quote:
Originally Posted by doh123
1. Closing the cover will cause more heat. This is not because of covering the keyboard very much (though it does help some heat be retained). It's mainly because of the shape of the hinge and the fact when closed it covers up the back vent a lot more. For the best cooling, it is best to have the screen open. Just run it as a dual monitor, but make the external the Primary monitor, and if you don't want to use the built in, just turn its backlight off and don't use it.
Nope. Apple would disagree with you on that one. Any "closure", which is, when compared to the amount of CFM, is insignificant. In fact, the opening size remains the same. it is only deflected at a slight angle when the lid is closed. Tilt your MBP and see. As well, shutting down the display lowers the heat being generated, even in the lower case. As I said, if it were a problem, Apple would not be selling stands designed to operate your unit in the closed position as the original poster of this thread proposes to do.
Currently using:
Apple MacBook Air 13" mid 2011 1.8GHz Core i7 4GB 256 GB SSD Lion & Ubuntu Linux via Fusion
MacBook Air 11.6" late 2010 1.6 GHZ, 320M, 4GB 180 GB SSD Upgraded OWC), OS X Lion

I just got my replacement phone from Warranty. The phone was on for just 2 hours and it crashed. I was told that motorola knows about this "possible" issue. I got a new sim, hard reset, If it can be done I did it. They are now sending me the same phone ag

I just got my replacement phone from Warranty. The phone was on for just 2 hours and it crashed. I was told that motorola knows about this "possible" issue. I got a new sim, hard reset, If it can be done I did it. They are now sending me the same phone again. Number 3. I would hope this one doesn't crash but I rather have a different phone so I can enjoy using my account. The phone's most recent error was today. " Unfortunately, the process com.motorola.widget.circlewidget3d" has stopped. At least the error message works and it's polite. I told tech this and they could not answer my question or help me other then "let's do a hard reset" My warranty replacement is coming on Monday. Let's hope this one works. Anyone else havinbg the same problem. it says "such and such as stop working" on all sorts of stuff! Help! I want my iPhone Back!

I just did a google search on this issue. OMG, I got a ton of videos on this or similar issues. Each one says in some way to clear the cache, reset the data, etc. Why in the world would this continue to happen and they not do a fix that resloves this without having to lose or stop what your doing. This is a very long and constant issue it seems with Android phones as there must have been pages and pages of what I now call "Unfortunately" So I am going to pray that Verizon helps me out and gets me away from this issue and helps me go back to iPhone or try the Samsung.

HEY, i have some issue i am using macbook air i5...the problem is that without doing anything 1.5gb of ram out of 2gb always in use ..please help me how to make it normal.

HEY, i have some issue i am using macbook air i5...the problem is that without doing anything 1.5gb of ram out of 2gb always in use ..please help me how to make it normal....
and my battery back up is max 3 to 3.5 hours in normal use with web ....is this normal or need some betterment!!!!

ADEEL UR REHMAN wrote:
...the problem is that without doing anything 1.5gb of ram out of 2gb always in use
No computer can do a thing without using memory. 1.5 GB is very little. It's normal.
3 or so hours from a full charge may also be normal, for what you are doing. As batteries age, they don't last as long on a full charge as they did when they were new. All batteries eventually wear out, and are easily replaceable.

HT204380 Can I possibly install FaceTime on my iPad air that bought from UAE here at my present location philippines

Can I possibly install FaceTime on my iPad air that bought from UAE here at my present location Philippines?
It's too late for to realize that what I bought from Apple UAE does not have installed FaceTime application. Since I am already now in my home country Philippines, Could I possibly download it (FaceTime) here in my present location Philippines?

FaceTime was by demand of the UAE government blocked in the iPad's hardware. As stedman said, there's no way you can activate FaceTime now.
Regards.

Is it possible to have source and target schema in the same DB instance ?

Hi All,
I'm using Oracle 11gR1.
I have switched source locations from other server to the one with OWB.
During deploy I get VLD-3064 and I can't deploy mapping because of many 'table or view does not exist' warnings.
Is it possible to have source and target schemas in the same instance ??
How to do it ?
Regards,
Martin

Hi Jörg,
Thanks for your help and quick answer.
I'd like to clarify a little your answer :
1. Are the any special privilages I need to set ? Currently I have only 'RESOURCE' and 'CONNECT' (I think I didn't have to add any other privs when that schema was located on other instance...)
2. Also VLD-3064 states that : 'Owning and referenced location of this connector are on the same database instance. Unless explicitly referenced in configuration settings no generated code will use the dataabase link resulting from deployment of this connector'. Does it mean I have to put something in configuration ?
Thanks,
Martin

Ok, how do I target Air 2.5 from Flash CS5?

How do I target Air 2.5 from Flash CS5?
I'd kill to have the enhanced css support...
Thanks!
-Ted

You can post this on Flash's forum. You should get a good answer from there.
As I understand, there should be an update in MAX. Not sure how the update will get released.

How do I target Air 2.5 from Flash CS5?

Ok, how do I target Air 2.5 from Flash CS5?
I'd kill to have the enhanced css support right now...
Thanks!
-Ted

ok, so i found the answer to my own question, for the moment gor here for the extension to do 2.5 in cs5:
http://labs.adobe.com/technologies/flashpro_extensionforair/

[svn] 4488: Attempt to fix the heap-space issue with the doc target.

Revision: 4488
Author: [email protected]
Date: 2009-01-12 12:10:58 -0800 (Mon, 12 Jan 2009)
Log Message:
Attempt to fix the heap-space issue with the doc target.
Also removing some unused code.
QE Notes: None
Doc Notes: None
tests: checkintests
Modified Paths:
flex/sdk/trunk/frameworks/projects/airframework/build.xml
flex/sdk/trunk/frameworks/projects/flash-integration/build.xml
flex/sdk/trunk/frameworks/projects/flex/build.xml
flex/sdk/trunk/frameworks/projects/flex4/build.xml
flex/sdk/trunk/frameworks/projects/framework/build.xml
flex/sdk/trunk/frameworks/projects/haloclassic/build.xml
flex/sdk/trunk/frameworks/projects/rpc/build.xml
flex/sdk/trunk/frameworks/projects/utilities/build.xml
flex/sdk/trunk/frameworks/projects/wireframe/build.xml
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocAPI.java
Removed Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/PumpStreamHandler.java

1. Tell more about it, e.g.: OS, a sun jdk or a ibm jdk? 32-bit or 64-bit?
for ibm jdk, look for *.hpd file within the dir.
for sun jdk, add startup option -XX:+HeapDumpOnOutOfMemError
Then analyze them with heap analyzer.
2.MaxPermSize=1024m so big space for class files, really necessary?

AIR Native Drag & Drop -- AIR app to Desktop

Hello,
I am trying to figure out how to drag from AIR app to
dektop/MSWord. I found lots of sample for desktop to AIR app, but
not vice versa.
Is there any samples that I can have? How can I drag texts in
a text area to desktop/MSWord?
Thank you!!

Thanks for your answer.
i already tried something like this, but i still have
problems with getting the newly created entity dragged. how can I
position the new entity from my air app directly under the mouse
cursor? so far i didn't find any screen mouse position functions or
properties. If I use a fullscreen, always on top window with mostly
transparent parts, I can't capture the mouse position using
MOUSE_MOVE all the time. Besides, how can I change the focus from
my browser to my air app? I already tried calling
nativeWindow.orderToFront() and nativeWindow.activate(), but the
focus doesn't change when I click the entity in my flash page.
Maybe somebody knows an answer to this ...

Any possible issues using Captivate 4 on Vista 64-bit OS?

Hi:
Looking to order a new PC and load up on ram for Captivate 4 and some other applications I am using.
I realize Captivate 4 is not certified for use on a Vista 64 bit OS, but I am wondering if I will run into a bunch of performance issues or what your experience may be using C4 on a 64 bit machine. I heard it is possible to force Captivate 4 to run as a 32bit application, but I don't know specifically how to do it.
Any feedback is appreciated.

None that I found. I worked with adobe for a while and they sent me a couple of patchs that were supposed to fix the problem, and while I eventually could record audio, I never was able to edit it. Adobe eventually lost interest and stopped responding to my requests. I think it has something to do with Vista becasue I am running xp on a brand new 64bit Mac at home and it works fine.
Date: Thu, 27 May 2010 10:12:06 -0600
From: [email protected]
To: [email protected]
Subject: Any possible issues using Captivate 4 on Vista 64-bit OS?
I have the same problem on 64-bit Vista - the audio editor will not even open. Is there a solution to this?
>

Possible issue: multitouch interface/drag targets AIR 3.8.0.1430 Windows 8

Similar Messages

Maybe you are looking for