Post-enforcement continue on failure clears

Hi.
I seem to be posting quite a lot in here...
Anyway, I have created a patch policy. In the policy I have a post-enforcement action. It's a bundle. When I tick the "Continue on Failure" tickbox and then publish the policy, the tickbox clears.
Is this correct behaviour?
Thanks

Thanks for the swift reply and the great ideas! In the interests of self-preservation, I went the "two click boxes" route but duplicated the initial slide to get the effect I needed:
Slide 1:
Small click box - on success: go to Slide 3. Infinite attempts. No failure caption.
Large click box - on success: go to Slide 2. Success caption, formatted to look exactly like a failure caption (e.g., "Try again!")
Slide 2
A duplicate of Slide 1, with some alterations.
Small click box - on success: go to Slide 3. Failure caption ("Try again!") at exactly the same spot & size, with same wording, as the success caption on Slide 1.
Deleted the large click box.
Animation_1 - moving green arrow pointing at the small click box.
Slide 3:
The "result" slide.
The advantages are that it's relatively fast to do it, since I'm duplicating the existing slide and then making some pretty quick changes to the duplicate. The disadvantages are that this is really only useful for my standard point-n-click slides, not my rollover slides or other types of interactions. Also, it's making the files bigger.
I have been testing the trial version of Infosemantics' Event Handler widget and it has some fascinating possibilities, especially using several of them on the same slide. If I can put together something more elegant, I'll post it!

Similar Messages

After Effects can't continue: unexpected failure during application startup

Im running 10.10, Mac OSX, it was running fine before a minor update came out, and now I can not open AE CS6. I have uninstalled, reinstalled it, installed the trial of CC 2014. No messages beside "After Effects can’t continue: unexpected failure during application startup" come up.
System log:
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: WARNING: The Gestalt selector gestaltSystemVersion is returning 10.9.0 instead of 10.10.0. Use NSProcessInfo's operatingSystemVersion property to get correct system version number.
            Call location:
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 0   CarbonCore                          0x00007fff82bb637d ___Gestalt_SystemVersion_block_invoke + 113
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 1   libdispatch.dylib                   0x00007fff8bf70fa2 _dispatch_client_callout + 8
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 2   libdispatch.dylib                   0x00007fff8bf70f00 dispatch_once_f + 79
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 3   CarbonCore                          0x00007fff82b5e932 _Gestalt_SystemVersion + 987
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 4   CarbonCore                          0x00007fff82b5e51f Gestalt + 144
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 5   AdobeCrashDaemon                    0x0000000100002e69 -[MyDaemon GetOSVersionMajor] + 33
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 6   AdobeCrashDaemon                    0x0000000100002d4a -[MyDaemon isRunningOnLeopard] + 25

Well, looks like a bug in Yosemite. You might wanan read the pertinent announcements, anyway. At this point Adobe apps are not compatible with OSX 10.10.
Mylenium

I installed the CC trial with an error window saying: Could not create the file '/Users/dranim/Library/Preferences/Adobe/After Effects/13.2/dummy'. That was the first window. Heres the second: After Effects can't continue: unexpected failure during app

I installed the CC trial with an error window saying: Could not create the file '/Users/dranim/Library/Preferences/Adobe/After Effects/13.2/dummy'. That was the first window. Heres the second: After Effects can’t continue: unexpected failure during application startup I paid for the month subscription of 29.99. It claims it is downloading again?! Am I missing something here? Why is this process so complicated? I need to get this resolved asap and start working.

I originally had Adobe Photoshop Extended, then upgraded to the Production Suite. I ran the Adobe Cleaner, and that uninstalled most Adobe products, including my existing Adobe install, and then I re-installed everything with the same error code. Since CS4 came with CS5, I've installed AE CS4, but would really like to upgrade because I'm new to Creative Suite, and not sure how CS4 integrates with CS5...CS4 After Effects installed perfectly. I do have a 64 bit system, and installing to an OCZ Vertex 2....every other suite installs perfectly, except AE. And I think that is the coolest program in the Suite. I thank you all so much for taking the time to help, I really want to get AECS5 running...I did try to install after doing the recommended items Adobe suggests for Exit Codes 6 and 7, including turning off many startups...
I'm baffled....
Ben

CP6 internal server reporting modifications - Post Results - Continue button

I have searched the forum for similar issues, and have posed one or two questions, but I am struggling to get a clear direction as to how to post quiz results to an internal server automatically (including user variables), without the name/email dialog screen appearing. In addtion, to CLOSE the browser, on the Quiz Results slide,I have tried multiple options with the continue button, including a javascript command of:
top.window.close();
(courtesy of Colday213)
But this did not work for me when I tried to enter the script into the quiz preferences area (can't directly edit the continue button on the quiz results slide).
I have already been posting practice results to my website using the standard INTERNAL SERVER reporting method.
BUT --- here is my wish list --- to modify the process
1. Capture user variables (First name, Last name, student ID and student number) and post them with the quiz results. I have a slide setup to to do this.
2. Post results AUTOMATICALLY to the internal server without showing the Quiz Results slide at all.
3. Have the quiz exit the browser completely once the quiz has been taken.
My quiz results slide has TWO renamed buttons: SEND EXAM (Post results) and EXIT (Continue). My preferences on either pass or fail are "Continue". I have even made the "score" tiny font, and invisible (black text on black background), so the reults page shows (and which I wish did not appear).
Perhaps only a LMS is the method to allow the above, but I may not have an LMS option --- hence, the internal server method..

I will investigate the google spreadsheet option as that may solve the first two issues.
Regarding the last item, EXITING the quiz (closing the browser) --- since the user gets to an ending slide that asks them if they are satisfied with their user variables entered at the start, perhaps I can program the javascript "exit" command on that slide, once the use varifies the data is correct? Currently, a "continue" button appears after user data is verified, and then the button advances to the RESULTS slide, so that the resuls can be posted, which invokes the standard name/email dialog.
If the widget posts the quz results to the google spreadsheet after the last question has bee answered, then I can either HIDE (skip) the results slide, or choose "don't show" (uncheck) the quiz results box in the preferences, and have the verification slide appear. Then, I just need to make the browser close from there (probably with a button).
I will experiment with this option.
I was also wondering if I can edit the PHP file that collects the quiz results to include the user variables?

K8T Master2-Far Will not POST unless CMOS is freshly cleared!

Hey all, thanks for helping out.
I came back to my computer one day to find it in a coma. The system was on, but the screen was getting no signal and would not come on by moving the mouse/keyboard like usual. I thought that maybe it had turned off the monitor for power save and then frooze some how. After restarting the computer I found that it was still doing the same thing. I shut down the system and unpluged. After waiting about 5 min i plugged back in and flipped the switch on the powersupply. This started the computer right up (even though i had not pushed th power button) and left it in the same condition as before. It simply would not post. After closer inspection I found that it was not posting because it wasn't getting far enough in the process before it was being restarted. I checked the restart button and even went as far as removing it from the motherboard. This did not help. I knew it was restarting because i could see it checking the optical drives then waiting for about 4 seconds, then a weird noise from the speakers (like a soft cruching so to speak) would happen, then it would do this all over again, non stop. That noise was familliar though, it was the normal noise that I hear when I push the restart button (I'm guessing a release of electricity etc..) so I knew what was going on.
After switching the memory out and in all orders, I stripped the system down to the bare min. This however did not change anything. I put the system back together and flashed the cmos. This made the system restart once, then "BEEP" it posted. It said CMOS Checksome Error - Defaults Loaded. I first pushed DEL to get into the bios. I changed everything back to how its suppost to be (time, apature, etc...) then saved and exited. This made the system go back into its restarting state. I then flashed the cmos again and pushed F1 to continue. The system booted up just fine. In safemode of course. Then i restarted. It then went back into its restarting state. I flashed the bios again. And after pushing F1 to continue selected it to go into windows normally. Everytime it does this it gets different results. One time it got past the windows xp loading screen and sat at the black screen before you get your curser and welcome screen (sigh... restart... flash..). It also once got in just fine, and after about 5 min got a blue screen about "bad pool caller". It most the time however gets a random blue screen right after you see the welcome screen. These blue screens consist of "bad pool caller", "IRQ Equal or Lesser Value", or No notes, just generic blue screen.
If i change anything in my bios it will not post. If i dont flash the cmos, it will not post. If i dont change anything in bios and continue, then restart, it will not post. The only way for it to post and for me to see anything on the screen is to flash the cmos. I thought it might be the power supply, but the only extra i have does not have the extra plug to power the 2nd cpu. After thinking about it though. I dont know if it could be a power supply issue, if it was then would it even load up into safe mode? Or why would it not load up into safe mode again after restarting. I have tried an extra stick of memory that i know works in a separate computer, but nothing changed. I have tried a different videocard... nothing changed. I have removed everthing accept the basics (motherboard, cpu's,videocard,memory,psu) and nothing changed.
I have worked on this for about 1 week now and can not figure it out. I have my useless MCSE/CSE/A+ certifications (I say useless because I dont have a job that uses them) but this one is beyond me. If anyone could help I would appreciate it.
Thanks,
Brandon
P.S. I dont know if this is related, but I did have to change from useing the DVI connection to RGB plug to even see anything once I heard it post. I was useing DVI before, and once i figured out that it would post after flashing cmos, I had to change to RGB to get any visual. The DVI will not work now at all. I have even tried changing cords. The DVI wont work in safemode either. Thanks

I reckon these mobos have a fault that really needs to be sorted. You say that your PC was working fine using PC 3200 memory with 240's. I have a similliar problem, I am using 246's with Kingston' PC3200 KVR333X72RC25/512D 2.5 ECC REG. The PC worked fine for about two weeks and then one day went on a blink, every time I power it up all I get is beeps. I was forced to order new BIOS, which didn't work everything else has been tested and works fine.
So I ordered micron memory 2X512 PC 2100 266 ECC REG which I was told by the supplier that it was compartible, that didn't work either. I then went on to check the battery, to my surprise the battery was low so I thought I had nailed it, went out bought a new battery but the problem still exits. I must say though after installing the micron memory it did boot up but when I went into BIOS to change settings to boot fro CDROM the damn thing would not restart I had to switch it off using the power button to restart it and when it restarted all i got was beeps. After that to get it to bootup I have to reset CMOS using the jumper and when it boots up it gives a checksum error message. I have a choice of two at this stage
(1) To Press F1
(2) To Press delete o go into BIOS setup
The F1 option takes me as far as the windows log on screen and that's it cuts off as if it is gonna boot itself backup but just hangs there.
The Delete option takes into BIOS which when exited the PC does nothing until powered down and powered up again, from here I have to reset CMOS to get it to bootup.
I have been told that the kingston memory is not compatible but my question is how did it work the first two weeks?
Good ol' Bas have helped out on this one quite often but here I am three months on still in a struggle. I thought of RMAing the board but it would cost me about 160 pounds and with that kind of money I could pick up another boad from kompllete.com and remain with some change for a couple of buds.
"To bass You said in the last post that the poblem could be the power supply changed it but that has not solved my problem"

Post Moved Continual-problem-with-SMTP-passwor...

Post Moved to Other BB Queries http://community.bt.com/t5/Other-BB-Queries/Continual-problem-with-SMTP-password-being-blocked/td-p/...
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Post Moved to Other BB Queries http://community.bt.com/t5/Other-BB-Queries/Continual-problem-with-SMTP-password-being-blocked/td-p/...
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Cleared paper jam-printer continues to display clear paper jam-printer will not reset

officejet 8500 909a- cleared paper jam, printer continues to display Paper Jam, clear paper jam then press OK, that does not work. followed all hp instructions and attempted to reset. does not reset. unit is less that 3 years old. can the problem be fixed or should I just buy another printer which by the way more than likely will not be another hp product

Hello,
Here are some common steps to clear the paper jam:
http://h30434.www3.hp.com/t5/Other-printing-questions/False-Paper-Jam/td-p/905169
Another helpful resource to clean paper jams:
http://h30434.www3.hp.com/t5/Other-printing-questions/Paper-Jam-videos/td-p/331916
Hope this helps.
I work for HP.

Continual order failure. Unbelievable customer ser...

Hi,
I am a Bt broadband customer and I was recently told that I would be able to update to the infinity service.
I have been trying to do so for weeks now and have been experiencing the catastrophe that is bt's customer service. I have called no less than 5 times and made an order online. Each time I have been told to expect a call from an engineer which never comes, I call up and the orde has not been put through. The last time I did this I told the guy on the phone that I had no confidence in gettin a callback, and he told me he would call me personally to check I had received this. I received neither call.
I am a busy person and at this point another wasted 30 minutes on the phone seems outrageous and pointless in the face of this systematic failure to deal with my very simple orders. Where can I go from here? Do I have recourse to just leave the service due to the atrocious service I have been receiving?
I literally cannot seem to extract the service I
am paying for despite somuch time
taken out of my busy schedule to try and fix this issue.
Really dissapointing and frustrating.

I have been a BT customer for 25 years and used BT Broadband for several years. I tried to upgrade my Broadband to unlimited from the 10GB limit with Broadband Option 1. Little did I think that by upgrading my Broadband I would downgrade my phone package from anytime unlimited calls to just evenings and week-ends... This was not clear on teh web site. I managed to reverse this after several calls but then my troubles really started when I tried to upgrade the Broadband by phone rather than online. I keep being given different options and agree to place an order which then fails. On several occasions I have been promised that I would be called to confirm the order has gone through but haven't been called. One order I agreed was for £18:80 that was for for anytime calls + unlimited Broadband with a 12 month contract. This order failed and BT failed to notify me as promised. The next order I placed on 22/04/2013 was for £17.65 for anytime calls + a 40GB limit also with a 12 month contract but this has also failed. I was promised I would get e-mail confirmation in 24 hours but had heard nothing after 48 hours. When I look online to try and see what package I am on I see "system error can't display account info". I would have though BT would try and contact me immediately if an order failed.
This has beeen rumbling on for several weeks now and my bill is increasing due to daytime phone calls which used to be free. I seem to be getting nowhere and have wasted hours on the phone trying to get through and explain what I want to numerous people in the UK and India repeatedly. The people are invariably polite but the service is dreadful and reminiscent of the old state owned GPO. If only I could switch without a penalty exit... Having said that I am happy with the products (Broadband, BT Talk and e-mail) - who would have thought that BT could make what I think is a straightforward request so difficult to achieve...

LMS 4.2.3 Continuous Authentication failure alarm in DFM

Hi All,
We are getting continuous minor alarm[Authentication Failure] for single router in the DFM. can we check from which ip we are getting the authentication request??
possible steps to find the cause for the authentication failure.?
Regards,
Channa

Hi Vinod,
I tried delete the DFM and DFM1.log files. but after stopping the deamon manager.unable to delete DFM1.log as this file was accessed by the smserver.exe in the backend.
i have successful moved both RPS files and DFM.log file from the location. but the issue persists.
I try again to delete DFM1.log file in the MW and update.
Regards,
Channa

Continued conversion failure

I'm very irriated with the continued failure with ADOBE. I've updated my system requirements and been very patient with the continued errors for weeks on out BUT it gets very frustrating. I can't do my job when this conversion failure happens. Please help someone that knows what I can do to fix this.

@thewindshieldguys
Some inconsistancies that confuse the issue.
You mention use of Adobe Reader. While Reader is fine for open/view of a PDF it (Reader) does not & cannot create a PDF file.
Adobe Reader XI does have an inbuilt feature that 'connects' the user to Adobe online, subscription services that can provide various services. One of these is the creation of a PDF from a TIFF file submitted to the online service.
So, is this the process you are using? If so you must be a subscriber and be logged into the service's servers.
That you mention "conversion failure" is indicative of use of the online service(s).
You've mentioned Acrobat XI Pro. With this application installed you can create a PDF from scanner.
For this always have the scanner/printer device manufacturer's latest software/drivers installed.
Using Acrobat XI Pro you can File :: Create :: PDF from file
Browse to and select the TIFF file to processed.
Be well...

No posts after following instructions to clear CMOS

I have a K8MGM2-L mobo. I recently changed processors from AMD Athlon 64 3500+ (939) to an AMD Athlon 64 4000+ (939). My OS is Windows XP sp2. After the upgrade, my system kept locking with the error message: IROQ<NOT EQUAL>..... I was going to clear the CMOS and load the BIOS default, and then I was going to flash update the BIOS, but after clearing the CMOS per recommendation of removing the battery and temporarily moving the JBAT1 jumper from 1-2 position to 2-3 position for 15 min. then returning the jumper back to 1-2 position. It cleared the CMOS, but now nothing posts at all. What can I do now?!

Quote
FYI: Old cpu was accidentally removed when HSF was removed for cleaning and subsequently damaged.
In a worst case scenario, the board was damaged as well when that happened.
Quote
This was the standard build for Gateway's eMachine model T6532
Mh, sorry to say, but we only support MSI-Retail products in this forum.
>>OEM boards manufactured by MSI<<
Please contact Gateway for further help/advice in this matter:
http://www.emachines.com/support/product_support.html?cat=Desktops&subcat=T-Series&model=T6532
>Topic Locked<

2 iTunes problems Post Mac Book HD Failure

Recently I had a HD problem on my Mac Book that is now resolved
As far as iTunes goes I want to be able to get at my purchased music and decide what I want to download
However I'm finding 2 problems with this
1 - When I go into Purchased music I only see a recent list of album covers
Nowhere do I see an option to see all the album covers which would be far more user friendly
On the left hand side there is a 'list' of purchases but this is extremely unuser friendly as many albums have more than one artist and therefore it would take a lot of work to get one album in alot of cases
What I'm sure should exist is a complete list of album covers (just like there is a complete list of films in another section) so that you can quick and easy see what you have and what you want to get form the itunes cloud
Any help on how to get that?
2 - Secondly, I have through the sidebar searched for an album to inly find it (in some cases only some of the tracks) but NONE of them can be downloaded because that purchase no longer exists in the iTunes store
Surely that's wrong beyond belief!
Anyone ever experienced that and what they did to solve?
Thanks
M

Hi,
Have a read at this Download past purchases. It may be that you iTunes library shows track information but is no longer creating a link to the original file which is no longer there because of the hard drive failure. You will need to delete the tracks then go through the process described.
Another thing to consider is that you go to preference > store and tick show iTunes purchases in the cloud
Again you may need to delete original link - don't select remove from cloud.
Another alternative is to create an alternative library iTunes: How to open an alternate iTunes Library file or create a new one
Do you have a back up of your music?
Jim
<Email Edited By Host>

Continuing Hardware Failure with Macbook Pro

Before I explain my situation I'd like to mention that I'm very careful with my things and my mac has not sustained liquid or any other damage.
About a month ago my Late 2011 release Macbook Pro experienced some hardware failure, specifically concerning the built-in keyboard, it has been 2 weeks since I received it from repairs and it has now experienced hard drive failure, I went on to erasing the hdd and reinstalling the os, it appears to be working fine but I'm concerned that it may experience more problems in the future.
I bought my Macbook Pro this past November and I feel that it may have been defective as it has experienced these problems in such a short amount of time. Is there any way that apple can replace my Macbook Pro for a new one?

No. After 14 days from purchase Apple reserves the right to repair or replace at their option. Thus far you've had a keyboard failure. Your HDD is working and nothing else has happened. You have no evidence to suggest the computer is defective since it has had only one hardware failure. I'd say you are making a mountain out of a molehill.

Canon MP270 Continues to Print Cleared Prints

My MP270 insists on printing a cleared print every time I start it. The print was sent from a shared MacBook Pro and the printer will print several copies of this before I delete the jobs from the queue. Despite this, the jobs restart each time I start the printer and is wasting paper and ink.
I have cleared the print queue, so can't see any other way of stopping this. Anyone know the answer?

John Hutcheson wrote:
The print being produced was from the Bootcamp partition. It seems that it is reproduced each time I boot into Windows.
Well then I would turn off the printer and boot into Windows and delete the printer. Then still while in Printers & Faxes, select File > Server Properties and then Drivers. Select the printer from the list and then select Remove Driver.
With the drivers removed I would then turn the printer back on and restart Windows to see if this job prints (you could remove the paper so that it doesn't try to print and if a job is sent from Windows then at least you could clear it from the Windows queue).

Post-A&I Application Failure

Hi folks,
I performed an Archive and Install on my new MacBook to resolve a funny clock issue 2 days ago. While the A&I fixed the clock issue it appears to have created another problem. Quicken 2006 (which came installed on my macbook) won't work. I have already tried removing it and reinstalling it from the OS X disk but that didn't work (just got a mess of folders).
Since Quicken was installed on my machine when I bought it, can I contact Quicken for support? Or should I contact Apple?
Any advice would be greatly appreciated. Thanks.

Nevermind. It's a Palm thing. I should have searched the forums before posting.

Post-enforcement continue on failure clears

Similar Messages

Maybe you are looking for