Postal address validation popup

Hi Guys,
I am trying to display popup with multiple addresses which are similar to address keyed by agent to decide the correct address. I found an Link: [SAP note 1017763 |https://service.sap.com/sap/support/notes/1017763] which describes a possible solution. I have tried that solution but didn't get desired results.
I will appreciate if any one who has already implemented such solution could share his experiences.
My requirements are:
1. validate street address (ADDRESS_CHECK BAdI implemented for that)
2. If address is re-determined then display suggested addresses to agent in IC Web as pop-up
3. Give agent option to accept suggested address or use the keyed address
Thanks in advance.
Best Regards,
Jashan

Hello,
There are several SAP Notes for CRM 7.0 that deal with Address Validation and Duplicate Check.
Best Regards,
Justin

Similar Messages

How to avoid address validation popup in CRM5.0

Hi,
Since the CRM system is upgraded to 5.0, we are receiving this warning popup when address for a BP is maintained while creating a BP:
Error in address check:
No long text found ***
Accept address?
And the user has to press YES to move ahead everytime. This popup was not appearing in CRM4.0.
Any idea how to get rid of this popup? How to supress this address validation?
Regards,
Kaushal

No, I think I might found the solution in note 1014597. I am waiting to see if this does resolve my issue.
Thanks for your help.
Regards,
Kaushal

CRM 5 - using Data Cleansing for Postal Address validation/cleansing

Hi Experts
We are currently evaluting using a 3rd party tool to cleanse our customer master address data. This will require an export of our database, where it will be cleansed by the 3rd party tool (which we house) and re-imported back into CRM with the corrected address data uploaded against the business partner.
My questions are around using the Data Cleansing module under the SAP CRM Menu Master Data -> Business Partners -> Data Cleansing
Has anyone used the File Export and File Import functions to do data cleansing of this nature?
What is involved to set up the export correctly? I see it requires use of an identification number to export the data successfully. We do not have any of this data populated against our business partners, so I would like to know of ways around this if possible.
Any tips or tricks around using this functionality would be appreciated. Our 3rd Party software is QAS Batch, so any extra information anyone has on this particular tool would also be appreciated.
Many thanks
Regards
Cara

Found out the simple answer to a dumb problem:
You must drag-and-drop the ICON (Folder icon, document icon) of the object that you are moving, not just the text of the object. Dragging the icon will highlight the icon and the name of what you are trying to move and it will then move to the appropraite folder without giving the clipboard error.

PCUI Address Verification POPUP

Hi,
We are using Trillium for address validation.IF duplicate adrress exist it pops up in GUI,but in PCUI it doesn't.Do we need to configure any thing to make it happen.
Thanks in advance,
Abdul raheem .S

Hi All
I am facing the same problem. I was going through SDN and found this thread.
If the problem is solved please provide me with the solution.
When we create an Organization from GUI, if that particular combination of Country, Region and Postal Code has multiple Jurisdiction Codes, then it gives me a pop-up and when I select one value from it, a new organization is created.
But in PCUI, a popup comes giving an exception.
PLease solve this.
Regards,
Raju

Configuration Settings for Postal Adress Validation and Duplicate Check

Hi,
What are The Configuration settings for Postal adress validation and Duplicate Check for Accounts(BP'S) in CRM 7.0 version
Can some one send me the configuration settings for Postal Adress validation and Duplicate Check
Thanks & Regards
Kishor Kumar

Hi kishore kumar,
For the Postal code Validation you need to install and configure the following
Outside of your SAP system:
1. Install Data Services and the Address Directories.
2. Install Data Services Component.
3. Install the RFC Server.
On your SAP system:
4. Install the BAdIs from the previous version of this product.
5. Install the BAdIs support package from this version.
6. Run the post-installation tasks required of a new installation of the BAdIs.
7. Activate the IC WebClient, if desired.
Thanks
Jayakrishnan Nair

Parsing Postal Address

I'm writing a web-based application and I need to parse the line 1 of an address. I was wondering if there is an API to do this for me. I didn't see anything in the JavaDocs. I need to parse the address and then validate it. The validation isn't as necessary since I have access to a database and can check for addresses and.or closely matching addresses already. I just need to make sure I'm getting the correct information from the text field.
So any tips on parsing a US Postal address?
thanks

If I asked that question, it is just because I happen to work in the field of semantic extraction and this is definitely not a simple question.
Still, since this is 'only' about postal addresses, you might be able to program some filters :
- one for the Zip code with that kind of use :
ZipCodeFilter myZipCodeFilter = new ZipCodeFilter();
boolean foundZipCode = myZipCodeFilter.isZipCode(myString);
- a filter for the towns. For this one the best way is to find a lexicon somewhere on the web that contains all US town names. Best luck on that.
- for the street address, this is a lot trickier. You have to have a good idea about how they normally look like. When given a street address, you want to verify that it follows a certain given pattern. That is possible only if you already have found the street number, the street type (boulevard, street, road, avenue and all their other written forms, bd, st, rd, av...) and finally the street name itself.
This is really not simple so you really would be better off giving a definite pattern to your users.
Hope this helps and is not completely out of the subject.

PCUI Integration with Address Validation

Hi Friends,
Iam working in CRM 5.0. Please find my requirement below:
When accounts are created with or changed with PCUI and IC Web client: display feedback from Address validation software, using the "out of the box" GUI integration as a model.
1. Display addresses validation warnings/correction feedback, if any. The user will have the option to:
     a. Accept the address validation software correction , or
     b. Bypass the warning and use the original address that they entered, or
     c. Cancel and return to account maintenance
2. Display duplicate candidates and allow the user to switch to a duplicate candidate if desired by clicking
     the candidate (instead of proceeding with account creation)
How can I check whether the Address Validation software is integrated with PCUI? If it is not integrated, then is there any configuration to be done to get the popups for address validation and duplicate check?
Your suggestions and Ideas will be rewarded.
Regards,
Raju...

Hi
You can build up the logic for Duplicate Search and display it as a popup in PCUI
The logic can be put in Modify method of the class in PCUI so that when user enters a address the duplicate records are found
You can then display the records in a popup in PCUI side

Web Client Integration with Address Validation

Hi Friends,
Iam working in CRM 5.0. Please find my requirement below:
When accounts are created with or changed with PCUI and IC Web client: display feedback from Address validation software, using the "out of the box" GUI integration as a model.
1. Display addresses validation warnings/correction feedback, if any. The user will have the option to:
     a. Accept the address validation software correction , or
     b. Bypass the warning and use the original address that they entered, or
     c. Cancel and return to account maintenance
2. Display duplicate candidates and allow the user to switch to a duplicate candidate if desired by clicking
     the candidate (instead of proceeding with account creation)
How can I check whether the Address Validation software is integrated with IC Web Client? If it is not integrated, then is there any configuration to be done to get the popups for address validation and duplicate check?
Your suggestions and Ideas will be rewarded.
Regards,
Raju...

Hi Friends,
Any suggestion on this?
Thanks & Regards,
Raju

Oracle iStore Address validation on Profile pages

Hello Gurus,
I need to validate city,state and postal code address validation on address edit screen of "COMPANY PROFILE -> Contact Information" page.
However, we do not have following tables populated:
ar_location_values
ar_location_rates
as we are not using or having any taxes.
Therefore, my attempt to turn on the profile option:
System Options -> Tax, setting the Address Validation to 'Error'
or
addressBean.verifyAddress(forceValidation, RequestCtx.getOperatingUnit()) or FlexibleAddress.validate..
always returns the validation error (even if the address including county is correct) as there are no matches from table.
Can anyone please let me know, if there is any other way to get the address validations in place.
Thanks,
PV

After the validation, user is shown a page with "Ok" and "Cancel" options ( please note as said earlier we are not going with "Accept" or "Reject") along with recommended address if the address needs to be corrected. If user clicks "Ok", user will be in the Address update page and can edit the address with the recommded address. If user clicks "Cancel", control goes to next page by saving the address what ever is entered intially.
After passing through the validation logic in the work flow process and based on the result returned, can a OAF page be invoked which can show recommended address with OK and Cancel buttons?

Global address validation is not working

Hi,
In the current situation, requirement is on Global Address Validation.
I consider that for BO DQ to run for Global Address Validation County, Street related data, City, Postal_Code and Region, these 5 fields are required. But while maintaining data for international user postal_code and Region field information is missing because of which record cannot be validated (i.e other related data cannot be pop up )with the Data Quality tool, also i cannot list out countries whose region and postal codes are not available.
so how can i validate the record on the basis of remaining three fields ie. Country, Street related data and City. Inputting these fieldsu2019 value Postal_code and Region field should also be populated and validated.

This is what I have for JCS 6 setup (verified that it works as well):
Server tab:
Incoming mail server: mail.foobar.com port 143
Outgoing mail server: mail.foobar.com port 25
LDAP server (Global Address List): ldap.foobar.com port 389
LDAP server (User settings): ldap.foobar.com port 389
Address book server: convergence.foobar.com port 80
Calendar server: calendar.foobar.com port 8004
LDAP tab:
Search base: o=foobar.com,o=isp
VLV search filter is the default value
VLV sort attribute is cn
Require authentication is checked
User DN pattern is uid=%s,ou=people,o=foobar.com,o=isp
Retrieve user settings from LDAP should be checked
User DN pattern is the same as under 'Require authentication'
Address book tab:
Sun Java System Address Book Server Settings needs to have iwc/svc in the right hand side.
The server tab entry for address book server will automatically be on the left side of the field.

How can I modify an incorrect mailing address on my AppleCare Protection Plan certificate? After I registered a new product with AppleCare I realised that I'd entered the wrong postal address and I need to update it to show my correct address.

I need to modify an incorrect mailing address on my AppleCare Protection Plan certificate. After I registered a new product with AppleCare I realised that I'd entered the wrong postal address during the registration process and now I need to update my details to show my correct address. I've been trying for several hours to find a way to modify my address on the AppleCare site, with no success. Any help/advice would be greatly appreciated!

Contacting Apple World Wide for Support and Service
http://support.apple.com/kb/HE57
Apple Contact USA
http://www.apple.com/contact/

New video blog: Address Validation and Duplicate Check in IC

Hello Everyone,
Here is a short video discussing "Address Validation and Duplicate Check in the Interaction Center" for CRM 7.0 from Renee Wilhelm of SAP product management.
[http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/70e18a60-efc9-2c10-01ae-c4626f673a53]
Best regards,
John
P.S. Please share your thoughts, ideas, or concerns! Thank you.

Hi,
in the video, you say that the user (logged into the system as IC Agent), can choose to merge the BPs once identified that a duplication exists.
By the way, into SAP OSS note "1565230 - dump after merging of BPs in IC webclient" it is written that it is not supported to integrate Business partner merge functionality to IC webclient.
Here below, an extract from the Note:
Reason and Prerequisites:
It is not supported to integrate Business partner merge functionality to IC webclient. Technically after the merging of Businss partners, the buffers of business transaction will be initalized at API layer directly, instead of by Genil layer. It is not possible to synchronize the buffer to BOL layer. Once you access to the business transaction which has been initialized during the merging of Business partners, the dump will occur.
Solution:
It is required to move the functionality to the business roles for
backoffice scenario, for example, SALESPRO etc.
What do you think about? Am I missing something?
Thanks in advance and Best Regards,
Andrea

Export postal address from address book

Is there a way to export all of my postal address' from my address book to sticky labels for postage?

You should print them (link).

Validation popup conflicting with confirmation popup

I am using 11gR1.
I have a form with three buttons on it CreateInsert, Next, Cancel.
The next button fires model layer validation on a new record, the cancel button opens a confirmation popup and if the user clicks yes, navigates the away from the form. When a user clicks next AND the form does not pass the model layer entity validation, a validation error is raise in a validation popup. The problem comes when the user then decides to not fix the validation, but instead cancel out of the form via the cancel button AFTER they have already clicked next.
When the user clicks the cancel button it raises the confirmation pop-up and whether the users clicks yes or no on the pop-up, the model layer validation still fires. I have immediate set to true on the cancel button to bypass validation, BUT if they user has already clicked next the validation still runs when they try to answer the pop-up. This results in the user being stuck in a never ending series of pop-ups because the confirmation pop-up can not close because the model layer validation keeps firing.
I have a dialoglistener on the dialog and a method in the backing bean (backingBeanScope.backing_IAEdit.cancelConfirmDialog) but that code never fires. Anyone else run across this problem or have any ideas how to resolve it?
Here is the code from the command buttons...
<af:commandButton actionListener="#{bindings.CreateInsert.execute}" text="CreateInsert"    disabled="#{!bindings.CreateInsert.enabled}"
                            id="cb5"/>
<af:commandButton actionListener="#{bindings.Next.execute}" text="Next" disabled="#{!bindings.Next.enabled}" partialSubmit="true"
                            id="cb2"/>
<af:commandButton text="Cancel" id="cb4" action="Cancel" immediate="true">
                <af:showPopupBehavior popupId="p1"/>
</af:commandButton>
<af:popup id="p1">
              <af:dialog id="CancelConfirmDialog" title="Confirm Cancel" type="yesNo"
                               dialogListener="#{backingBeanScope.backing_IAEdit.cancelConfirmDialog}">
                      <af:outputText value="Are you sure you would like to cancel?" id="CancelOutput"
                                     inlineStyle="font-weight:bold; font-size:small;"/>
              </af:dialog>
</af:popup>

Thanks for the suggestion, but the code in the dialoglistener never fires.
When the user clicks yes or no to dismiss the dialog box, the validation from the bc layer fires (even though immediate is set to true on the cancel button) and pops up an error box. When the error box opens, it opens in a modal way, the dialog box grays out and all you can do is dismiss the error box. When the user clicks ok to dismiss the error box, the dialog box is still open. Then when the user again clicks yes or no on the dialog box, it again fires validation and pops up the error box in a modal way. So now the user is stuck with these two pop ups and can never get rid of the dialog box.
Just to clarify, this ONLY happens if the user FIRST clicked the next button which triggered the bc layer validation. If the user just clicks the cancel button, everything works as expected with the dialog box popping up, the user selects yes or no, the dialoglistener code is run and the user is navigated to another page. If the user just clicks the cancel button validation is never run as is expected by having immedate set to true.

Third party address validation in ESS pages using workflows

Can anyone help out in giving some ideas for solutioning the following.
Address entered in the page "Main Address: Enter New Address" of
Employee Self Service needs to be validated using third party PL/SQL API. This PL/SQL API is available in the same schema where HRMS objects are available. After the validating the address, user can be shown recommended or invalid address message when address entered is not valid. User can accept the recommended address or reject it in which case the original user entered address would be saved.
ESS pages are using workflows. What is the best design to call the third party address validation from the workflow and show the page with recommended address/invalid address message with "Accept" and "Reject" options. Can anyone help out on what are the technical possibilities to implement this address validation in the ESS page?.

After the validation, user is shown a page with "Ok" and "Cancel" options ( please note as said earlier we are not going with "Accept" or "Reject") along with recommended address if the address needs to be corrected. If user clicks "Ok", user will be in the Address update page and can edit the address with the recommded address. If user clicks "Cancel", control goes to next page by saving the address what ever is entered intially.
After passing through the validation logic in the work flow process and based on the result returned, can a OAF page be invoked which can show recommended address with OK and Cancel buttons?

Postal address validation popup

Similar Messages

Maybe you are looking for