PPM 9.1: unable to access app post fresh install

Followed the documentation for installing PPM 9.1 and did not encountered any errors. But when I access the application i.e. using the URL http://hostname/ProSight IIS throws the following error.
Server error in '/ProSight' Application.
construction of Prosight.Portfolios.BusinessLogic.Infrastructure.BusinessEntries.psreservedProperties+UI+UIProperties failed.
[attached the screenshot of the complete error.

I have exactly the same problem And in my case no back-up
Have looked at some older support forums and this is not an isolated problem
If i search my machine I can't find the iphoto library anywhere.
If I "Create a new Library" and want to turn on icould to get the few photo's i have saved there then it tells me that my apple  ID is use by another Library????
I cant find that Library.
Although I have had a mac for 2 years I do not know the in's and outs.
Have a tried a few suggestions from other forums but no luck
Any help appreciated!
RB

Similar Messages

  • HT1430 Have sync my IPAD and am unable to access apps, nothing happens when touched

    Unable to access apps after sync IPAD. when touching APPs nothing happens.

    Does this happen on all apps? Is your iPad jailbroken? This is usually be the cause of it.

  • Unable to access Apps on HP Officejet Pro 8600 Plus

    Hi guys,
    I can print wirelessly and print remotely using the ePrint apps on my iphone and ipad.  Until recently, I have been able to access the apps, but this has stopped. I now get the following error message: 
    "The printer was unable to connect to the server. Chieck your internet connection and try again."
    The internet connection is stable and fine. Any ideas?
    This question was solved.
    View Solution.

    Hello londonlaw,
    Welcome to the HP Support Forums!
    Sorry to hear about the recent issue when trying to access apps on  your Officejet Pro 8600, I would like to offer a few suggestions that may help.
    Check for updates on the printer, Getting the Latest Firmware and Product Updates.
    Power off the printer and ensure the power cord is connected to a wall out let.
    Next you want to power reset the router. If it has a power button press that, if not, remove the power cord. Wait 60 seconds and then allow it to power back up. Once router is fully on, power up the printer.
    Try to access an app, if it works there is no need to continue. If it doesn't, try the next suggestion.
    Refer to this Thread answered by a colleague of mine happytohelp01 : Efax 7510 still won't work after turning off/on ePrint several times. Follow the steps to setup a Manual I.P and DNS for the printer over the network. The steps will be the same, if not very similar for your printer as the one in the above post.
    Try to an app once done, if still unable, continue below.
    Go back to the above Thread, rather than using the DNS suggested try this set; Primary DNS Server : 209.244.0.3 & Secondary DNS Server : 209.244.0.4.
    Try to access an app, if the feature is still not working you will need to call HP's Cloud Support team. If you live in the USA/Canada, 1-855-785-2777. If you live outside the USA/Canada, click HERE to find the Technical Support number for your country/region.
    I hope this has helped, if it has, please let me know what step helped. 
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • I cannot access the iTunes store from any of my computers.  When I updated to v. 10.7 it made my laptop unable to access. I have installed and uninstalled numerous times.

    I cannot access the iTunes store from any of my computers.  When I updated to v. 10.7 it made my laptop unable to access just like with my two desktops. I have installed and uninstalled numerous times.

    Nothing happens.  iTunes just hangs up every time, saying "Accessing iTunes Store."  It does that for a very, very long time, then nothing.  Here is what happens when I run diagnostics.
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    LENOVO Lenovo H420
    iTunes 10.7.0.21
    QuickTime not available
    FairPlay 2.2.19
    Apple Application Support 2.2.2
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.0.0.59
    Apple Mobile Device Driver 1.62.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0015AF9C035D73D0
    Current user is not an administrator.
    The current local date and time is 2012-09-15 18:28:21.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Intel(R) HD Graphics Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name: {EF6BBA91-21E3-44BD-828F-794CBBBFC89D}
    Description: Intel(R) 82579V Gigabit Network Connection
    IP Address: 192.168.1.10
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.1.1
    DHCP Enabled: Yes
    DHCP Server: 192.168.1.1
    Lease Obtained: Sat Sep 15 17:52:30 2012
    Lease Expires: Sun Sep 16 17:52:30 2012
    DNS Servers: 192.168.1.1
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was unsuccessful.
    The network connection timed out.
    Basic connection to the store failed.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    The network connection timed out.
    Last successful iTunes Store access was 2012-04-29 17:37:19.
    **** Device Connectivity Tests ****
    iPodService 10.7.0.21 (x64) is currently running.
    iTunesHelper 10.7.0.21 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C26. Device is working properly.
    Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C2D. Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Connected Device Information:
    Brooke, iPod touch (2nd generation) running firmware version 4.2.1
    Serial Number: 9E******75J
    Most Recent Devices Not Currently Connected:
    iPod nano (6th Generation) running firmware version 1.2
    Serial Number: DC*******DVY
    iPhone 4S running firmware version 5.1.1
    Serial Number: C8*******TF9
    iPad 2 running firmware version 5.1.1
    Serial Number: DK*******FHW
    **** Device Sync Tests ****
    Sync tests completed successfully.
    <Edited by Host>

  • Unable to access apps/menu/almost anything

    I am asking this question on behalf of my colleague 
    Device info
    Your carrier: T-Mobile
    Model info and OS version: We know it’s a silver Pearl from checking against pictures – not certain of the exact number and (because of the problem) can’t check the OS version or any of the other requested information but if I manage it I’ll update – sorry!
    Basically the issue is that the apps bar (usually on the Home Screen) has disappeared and we can’t get into the apps screen using the menu key either - additionally the phone initially set itself to mute (and using the mute/unmute button did nothing) although we have since managed to change this to vibrate.
    I did a battery pull and we left the battery out a little while to ensure it was registered (I haven't had my Curve long enough to work out if just yanking it out and in again work just as well - my old phone needed it taking out for about half a minute before it would reset! Stupid thing.) then after putting it back in it went to a white screen with an egg timer on it for quite a while, but did eventually load. It verified the security software and then went back to the initial blank screen that was there before the pull but with a large red dot in the left hand corner.
    The first time I clicked anything after this it had a fit and gave App Error 523 (I haven't had a chance to see if I can look up what this means yet but will do after posting this) then when I clicked Reset (the option below the error report) it went off, the red light blinked once then it switched back on again.
    Same thing this time only when I click after unlock although the red dot is still there all that happens is that the dot disappears and the other options on the screen move down a tiny fraction. It's still set to vibrate which is a relief at least.
    The only thing we can do is get into the phone menu pressing the green button or a number, then from there by pressing the menu button there is a limited number of apps available (IM client, SMS, Web, Phone) and we can also get into the options for any of these once we're in but otherwise nothing is available.
    I hope that's enough information but please ask me if there's anything else I can give. I'd really appreciate any help! Thanks in advance.

    If your BlackBerry stays powered off with a black screen, follow the instructions below. The only indication of life might be the blinking red LED light in the top corner. Nothing seems to wake it up and Desktop Manager doesn't recognize any device is connected.
    1) Make sure you have Blackberry Desktop Manager installed.
    http://na.blackberry.com/eng/services/desktop/
    2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
    "c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
    3) The Application Loader Wizard will appear -- click "Next."
    4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
    5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life.  Just don't disconnect anything and let the lengthy process finish completely.
    NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
    http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
    Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Updated 1st gen iPad, unable to access apps.

    I recently updated my 1st gen iPad and my pictures and music seems to have transferred but none of my apps did. I can see them but cannot open them, they are dark in appearance as they look before they have completed downloading. I accessed the app store and was able to download a new app...

    I plugged in my ipad and ITunes says "iTunes was interrupted while restoring the contents of the iPad. Would you like to retore this iPad again now?". I pressed continue restore and a message came up that says "An error occurred while restoring this iPad (-1)". Im not sure where to go from here, or how to "unsync" and "resync".

  • Unable to authorize Apps post restore of iPhone 3g (software version 2.2.1)

    A little story...!
    I bought a new iPhone 3g last week. I love playing with hardware ans software so I downloaded the SDK, and installed it.
    I spent a happy evening writing a silly little app, which worked on the simulator. I wanted to test it for real, so connected my iPhone.
    XCode asked if I wanted to use it for development, I said yes (all going well so far)
    I tried to deploy to it, but it failed with an application authentication issue (totally separate). As it was late in the evening, I just shrugged and disconnected my iPhone.
    This morning I tried to use an application I had downloaded from the app store. It started then crashed. hmmm.
    I read a bunch of stuff on the net, and decided to restore the iPhone back to basic, then re-install everything.
    All was going well until it tried to restore the applications, then I received 'you are not authorized' messages for every app.
    More net reading. I finally found the answer which was a blend of two posts on this forum - hence this post which may help others.
    First the error:
    You try to restore your iPhone but it fails with a message 'you are not authorized' to install the app.
    Now the solution
    1) Disconnect the iPhone
    2) In iTunes -> Store -> authorize computer
    3) Put in your name and password (even if this is all working already)
    4) It tells you that the computer is already authorized.
    5) Reconnect the iPhone and the apps will now synchronize.
    I don't know why this works, but it does give me some more ideas about how apple authenticates things. Very much 'call the mother ship' if anything strange happens.
    Ho-hum - fixed now.
    I hope this helps anyone with the same problems...

    This has been a week from heck. Two computer died, cause unknown, then I could not re-install my apps.
    I tried your advice. At this moment you are a god.
    Thank you very much!!!!!!!!!!!!!!!!!!!!!
    Jim

  • I can access the Internet but unable to access apps

    I am actually on my iPod as I ask this question, but I cannot access YouTube, iTunes, or any of my apps that require Internet. But I can still use Safari!! I've tried to reset my network settings and connect to different wifi networks but nothing works. Help!!!

    All I can suggest is to:
    - Restore from backup
    - Reset all settings Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts
    and calendars) and media (such as songs and videos) aren’t affected.
    - Restore ot factory defaults/new iPod

  • Unable to access apps and i tunes

    i have had to cancel an old email address. As a result I can not use the app store as it is still asking for my old password with old email address. Can you advise what I should do PLEASE?

    Does the issue occur when downloading apps from scratch or when updating apps?
    - Go to Settings>iTunes & App Store
    - If you see your old Apple ID email there then tap on it and sign out.
    - Then sign into your current Apple ID

  • Unable to access 2nd HD after installing new DVD drive...stumped

    OK have a Mac Pro late 2009, superdrive was acting funny, errors burning DVD's,  so I installed a Pioneer DVD I got from Macsales. As soon as I did that, I started getting a grey bar on boot up. Come to find out, the Western DIgital 3tb drive I installed (WD30EXEZ) that I partiioned with Disk Utilities for a Working drive for bootcamp was unreadable, from Lion with Paragon NTFS.. I have two of them, the 1st I set up with a couple OS X partitions and as HFS working disk.Seems to be working fine, I think? My bootcamp (Winblows 7) is on the 640 WD SSD that came with the Mac. Disk Utilities comes up with an error when I verify the NTFS partition but not the drive itself but I a unable to repair it, Winblows 7 sees the drive but can't access it.So I am trying to figure out what went wrong and how to repair the file system. My Mac Pro was purchased Mar 2010 and was nto the primary box, I opted to use my Dell before I gave it to my son.
    On to the next problem
    I pulled the drive out and hooked it to my sons  (Dell) and running testdisk on it via Hirens Boot CD.
    Now when I boot the Mac I get the grey bar on the boot which tells me something else is wrong...
    any and all help is requested...
    thanks

    hard to fully understand
    Where is Windows 7?
    Do you have Paragon latest? never had trouble.
    3TB drives with GPT and used as data for Windows? The term "boot camp" means little or too many different things. Drivers, Windows on Mac, but not much else.
    I would never repair NTFS with Disk Utility unless Paragon  endorses such action.
    3TB Greens do seem to give a number of Mac Pro owners grief. Shouldn't but then who knows except WD and Apple may or may not be talking and sharing.
    I'd format the drive in Windows, or format the NTFS part. I do use GPT and NTFS for Windows data drives w/ no problem.
    WD makes a 640GB SSD? news to me. Can't be. Would check Saturday though. And Apple over-states size/capacity especially when it comes to SSDs. So Apple OEM'd SSD with WDC lable, right? or wrong?
    SSDs are an issue unto themselves lately with SATA3 models / firimware.
    Boot from Windows.
    Pull drives and leave just the one(s) for Windows; or, the one(s) used by OS X - would be a start.
    I would only use WD Lifeguard on the drive... whether on your Mac or the Dell.
    That is the best this late.

  • Unable to update apps after Mavericks install (Unable to update w/this Apple ID)

    After updating Mavericks I cannot update the Apps. It says, "Update Unavailable with this Apple ID.  This update is not available for this Apple ID either b/c it was bought by a different user or the item was refunded or cancelled".
    Neither of those reasons are accurate. Please advise.
    Thank You,
    Chris

    Perform the following, stopping with the first one which works:
    1. Open the Mac App Store's Purchases tab. If you're prompted to accept them into your Apple ID, do so.
    2. Move them out of the Applications folder(they may need to be put into the Trash temporarily), and then see if you can download them for free from their individual product pages. If you're asked to buy them, see #3.
    3. Click here, contact Apple, and wait for a response.
    4. Buy them.
    (116151)

  • Unable to access media card after install of 10 software update

    After installing the software 10 update, i'm not able to access the media card from the phone or when plugged in to the laptop. from the phone settings menu, i cant choose to save any file into the media card - its grayed out. Everything was working fine until I installed the update. Is this a common problem? did the update wipe out all the media card contents? 

    Have you tried removing the media card and re-inserting it?

  • Unable to access some websites since installing new WRT300N Wireless Router

    I have just replaced my old Belkin router with the new Linksys WRT300N, all of my connecting devices are Belkin & Linksys PCI or inbuilt Atheros and IntelPro 3945ABG Net on my laptops.
    The issue that I have is that since the upgrade a number of sites (yours included) do not connect straight away, I have to refresh the page until it connects, some do not.  This is not browser dependant as I have IE7 and Mozilla and the problems occurs in both.
    The wirless is setup with DHCP enabled on the first page, any ideas?

    Try to update the router's firmware. I heard, the latest firmware on their site should fix it.
    Love is just a word".... It has no emotions...only thoughts, imaginations.

  • Oracle R12 on Win XP Post Fresh Install  Form Error

    Hi Guys,
    Please has anyone successfully and permanently resolved this issue after successfully installing and logged on to Oracle Apps R12 but consistently getting this error when trying to log on again to the forms. I installed R12 directly on Winxp and using IE8 as the browser.
    "Frm-92101: There was a failure in the forms server during startup. This could happen due to invalid configuration. Please look into the web-server log file for details"
    Steps followed to try to resolve issue but failed include:
    Running successfully Autoconfig cmd,
    Stopping/starting oracle process manager(Failed to stop but starting indicates services already running)
    Disabling XSS filter.
    Stopping and starting Oracle services
    Anymore ideas will be appreciated.
    Please do not provide me with metalink ids as I d not currently have access to it. I need direct solution if any.
    Thanks in advance
    Ify
    Edited by: Ify on 27-Jun-2012 08:01

    "Frm-92101: There was a failure in the forms server during startup. This could happen due to invalid configuration. Please look into the web-server log file for details"Check the application.log file for details about the error.
    Please do not provide me with metalink ids as I d not currently have access to it. I need direct solution if any.Please note that posting the contents of MOS docs violates Oracle Support agreement policy and that is why we post the Doc ID instead of posting its contents.
    Thanks,
    Hussein

  • Cannot access apps

    I am unable to access app's such as pages, facebook amongst others, any ideads, it loads but shuts straight down before bringing up anything?

    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
    No data will be lost.

Maybe you are looking for