PR00 cannot be changed on header level

Hi All,
I activated the "header condition" flag of the condition type "PR00". And the manual entries flag of PR00 is marked as "C" (Manual entry has priority) But when I created a sales order, the PR00 still cannot be changed. Anyboday knows about the reason? PR00 is now changeable on item level.
Thanks
Jerome

Hi,
I think you agree that that the PR00 condition at header level is a collection of all the line items.We are maintaining the condition record for the articles in the condition record.Which are at line item level.PR00 at header level includes the toatsl of all line items PR00.
In case if you want to give total net order value HM00 condition type
Thanks
M.Sridhar

Similar Messages

Split valuated material price change at header level (without val. Type)

Hi All,
Need to change Split valuated Material Price at Header level (without val. type).
In MR21 valuation type is mandetory for split valuated material.
Please suggest on changing Material price without val. type.
Thanks

You have to advise the users who create accounting views to enter a valid price when they create a material master. Maybe you need to make use of the user exit to prevent saving when no price (or a dummy 0,01) is entered.
It is not possible to change the header price with any SAP given transaction, as it could cause inconsistencies if you dont take care about the stocks at valuation type level.
you may have to deveope an own report on own risk. I personally have the opinion that it is more secure to post stock and reverse it again (which just creates to accounting documents that equalize each other, no remaining value anywhere) than going the risk with an own program to screw up the valuation of a material in general

Pricing is not changed when pricing date is changed at header level.

Dear Gurus,
The query is about pricing. When I change the pricing date at header level it is supposed to chnage the pricing at item level also. But it is not happening. In our scenatio there is a ZPR0 price and there is a condition record for that.
The order was created earlier and now when we change the pricing date price is not being changed. I checked the analysis button. There it shows the following messages for ZPR0(In this case condition already exists). ZPR0 has three condition tables
1. Condition record exists, but has not been set (for the 1st table in acces sequence)
2. Access has not been executed due to previous access(for the 2nd table in acces sequence)
3. Access has not been executed due to previous access(for the 3rd table in acces sequence)
As a result we are not able to change price in the header level by changing the pricing date.
Please help
Thanks in advance,
Je

Hi Felipe,
The pricing will change if we click on the update button and select 'C' or 'B' option in the item level. But when we try to chnage by clicking on the update button in the header level it is not getting changed.
I would also like to add that customer wants the price to be changed without pressing the update button at tghe header level.
Please clarify on the pricing validity configuration . What steps are required in the pricing validity configuration.?
Thanking you,
Je
Edited by: jerryabap on Feb 4, 2011 12:17 PM

Cost Assignment Change on Header Level

This User changed the cost assignment at the top level to an internal order;
however, it did not apply to one of the hotel charges.
The other charge on the same date for the same vendor did change.
What caused the one transaction to remain with a cost center instead of internal order?
It was our understanding if the User changed the cost assignment at the top level it would be applied to all transactions in the report. Is this not correct?

Got the Solution from Development Colleagues:
If a traveler change the cost assignment from cost object A to cost object B at the top level of an expense report, then all expenses which are assigned to the cost object A at change moment(!) should get the new cost assignment to cost object B.
All expenses which are assigned to a different cost objects as A will be not changed!
Example 1:
Step 1. Traveler created an expense report with the cost assignment to cost center A
Step 2. Traveler added 3 expenses
=> Expected result: all 3 expenses should get the assignment to the cost center A
Step 3. Now traveler changed the cost assignment on top level of the meeting request to the project B
=> Expected result: all 3 expenses should get the assignment to the project B
Example 2:
Step 1. Traveler created an expense report with the cost assignment to cost center A
Step 2. Traveler added 3 expenses
=> Expected result: all 3 expenses should get the assignment to the cost center A
Step 3. Traveler changed manually the cost assignment of one expense to internal
order D
=> Expected result: 2 expenses are assigned to the cost center A and one expense is assigned to the internal order D (because of manually change!)
Step 4. Now the traveler changed the cost assignment on top level of meeting request from the cost center A to project B
=> Expected result: only 2 expenses which were assigned to the project A are now assigned to the project B, the one expense which was assigned to the internal order D should be still assigned to the internal order D (it is not assigned to the cost center A and therefore not affected by the change from cost center A to project B).

PO Form Issue with Header Level Changes

Issue:
It has been observed that whenever changes are done in PO Header (e.g. Header Text), system prints Billing Address and Communications Details as blank. If the changes are made to Line Item level along with header then system prints the Billing address and Communication Details correctly.
Analyse:
we are using the SELECT statement below to fetch the field for
Billing Address and Communications Details.
SELECT SINGLE
mandt z_plant z_company_code z_toll_free_no z_local_no z_fax_no
z_email z_name1 z_name2 z_street z_house_no z_district z_post_code
z_city z_country z_vat_no z_loc_term_cond z_langu
FROM zptp_poformdata
INTO w_poformdata
WHERE z_plant = ls_ekpo-werks
AND z_company_code = ls_ekpo-bukrs .
And when we only change the header level data no value is passing for comany code and plant . as a result Select statement gets failed and we are getting blank window.
NOTE: we are getting blank box only when we fire a print or fax.The preview is coming fine.

by asking so many questions in a single post,you are violating the rule of engagement given below
Only One Question Per Posting
For each question that you have, make a separate posting. Don't ask multiple questions in one posting, this is confusing for people and might not get answered, since the subject line does not reflect all your problems. If a new and unrelated question comes up during a thread, start a new thread.

PO number prints only if it is at header level not for item level

Hi All,
I am not able to print the PO number in my order acknowledgement and COA printout when I enter the PO number in the sales order at item level of only. It prints fine when it is at the header level.
Please assist.
Thank you,
Shanu Jain

Hi,
BSTKD Field in the VBKD is dependent on two things . IF the Header PO Number is same as the Item number if u change at Header level it will be changed at all items level also. If both are diff then if u change the PO Number at Header level it will change PO numbers of the Items which is having same value as Header Po Number otherwise it wont change the Item PO Number .
Ex " Order Number 1000 is having PO Number at Header Level is PO1. And the sales order is having Item 010 and 020.
IF Item 010 and 020 is having PO1 at item level if u change the value of PO1 at header Level if will be applicable to items 010 and 020.
If Item 010 is having Po Number PO1 and 020 is having PO2, if i change value of PO number at header to PO3 then it will change Item 010 PO Number to PO3 and Item 020 PO Number will be same as PO2.
Try to Take The VBKD - BSTKD where Item Number POSNR is blank that means Header PO Number .
IF u want Item Po Number then pass the item number in POSNR and get it.
Regards,
Srinivas.

Attachments at header level from SRM BI/BID to ECC PO

Hello All,
Our landscape is SRM 5.0sp09 & backend ECC 6.0.
SRM tech scenario - CLASSIC
SRM business scenario - Sourcing with Bid Invitation
We have set up DMS in ECC and are now able to transfer item level attachments from SRM BI and BID to ECC follow-on PO.
Our customer desires header level attachments since they want to avoid DMS maintainance.
We have checked this with sap OSS and the responce was---
<b>this is a limitation/desired behavior. SRM is not
passing the attachments as the same cannot be viewed at header level in
PO(as indicated by you). Hence only the item level attachments are
passed. I am not sure if the same is taken care in SRM 6.0.</b>
Our customer is still insisting for header level attachments.
Can anybody give relevant inputs?
BR
Dinesh

Hi Dinesh,
I am not sure about the exact technical details of the same. But i just know that SRM50 will not support this functionality. Sorry that i am not able to help you in this regard
Hope we will get some other reply here....
Thanks & Best Regards
Raj

PO Price update at Header Level

Hi Friends,
Our PO Price "Update" button at header was grayed out and only able to do at item level??
Actually we have a "Post dated" PO and the tax rate was changed now. So, we need to update the tax rate. To update at item level for each and every item is cumbusome.
Is there any way to update at header level. Or is there any way to update in MASS??
Or is there any program available to carry out pricing for a bunch of PO's??
Any valuable reply will be appreciated.
Regards,
Dev

Hi,
Since the condition type which you are using for taxes are configured to be entered at item level and changes can be made only at item level.
If you want to update it at header level and the condition type is applicable for all the line item in PO, please change in configuartion so that u can make changes at header level.
Path SPRO-> MM->Purchasing-> Conditions-> Define price determination process->Define conditon types . For particular condition type which u want to make changes at header level. Thr is a option changes which can be made. Click on check box for header condition.
Please see that it is config changes and it will get updated wherever this condition type is used.
Reply if u have any issues still.
Thanks,
Ravi

URGENT: Changing status at Header level in Service Ticket in Webclient

Hi All
Please reply ASAP.......
I am changing status for service ticket in webclient at Header level.
But at item level system status is not changing.
Is there any config in CRM where user status or system status is copied from header to item level
Basically need is to trigger item status when header status is trigerred....
Can anyone help me in resolving this issue.
Regards
Pankaj Vispute

Thanks Bhanu,
I solved my problem with your answer.
Thanks,
Praveen

Change currency at header level in shopping cart

Hello
I'm working with SRM 7.0 in classic scenario. We are facing an issue, because even if we change the currency at item level, when the PO is created in back-end it is the default currency of the supplier. We can change behaviour in Badi BBP_CREATE_BE_PO_NEW to get header currency (wich is default currency in pposa_bbp). But problem is that we want to be able to change header currency in shopping cart. And when we change header currency this currency will be applied in all items (thank to badi BBP_DOC_CHANGE).
How can we make possible for the requetser to choose the currency at header level? This currency will those when purchase order will be created.
Thank you.
Regards,
Peggy.

Hello Peggy,
If you change the SC header Currency as well it won't be an effective solution as your SC items can have muplitple currecies.
Now As per standard SRM PO currency is determined from vendor currency, hence if you SC line item is created with currency GBP and your vendor has currency CHF then your PO will be created with currency CHF only.
Now if you need to retain the SC line item currency in your PO then you need to do particular enhancements in standard SAP code to overwrite vendor currency functionality.
and more over I would suggest you to group the PO based on Currencies. For example all SC line items with currency CHF will create 1 PO.
In that case it will be easier to change the PO currency.

Change the Payment Method at header level in Sales order document.

Hi Experts,
I have a doubt and a problem; I want to change the Payment Method at the header level however that is not possible never at header level is the same even either I chose other when I was creating the sales order document or I tried to change after that. The system allows changing the Payment Method but when I display the document after that the change is not done always is the same payment method. Maybe it is defined at customer or sales organization level.
At item level it is possible change the payment method with any problem.
Thank you and best regards.

Dear Alberto
Payment Terms can be changed both at header level and at item level in sale order.
thanks
G. Lakshmipathi

BAPI_SALESORDER_CHANGE - Want to change the Ship-to-party at header level

Hi
I want to change the Ship-to-party at header level in the Sales Order created. I tried using the BAPI BAPI_SALESORDER_CHANGE as shown below.
When I run the program I get the log as Sales Order 45 saved succesfully. However, I don't find the SO changed. Apart from this I get an Express Message saying the Updation failure. Not sure of what'z wrong here.
Pls help
thanks
girish
REPORT ZBAPI_SALESORD_CHANGE.
data : zBAPISDHD       type BAPISDH1,
       zSALESDOCUMENT type BAPIVBELN-VBELN.
data : zORDER_ITEMS_IN     like /AFS/BAPISDITM occurs 0 with header line,
       zORDER_SCHEDULES_IN like /AFS/BAPISDSCHD occurs 0 with header line,
       zORDER_PARTNERS like BAPIPARNR      occurs 0 with header line,
       zRETURN         like BAPIRET2 occurs 0 with header line,
       so_no           type BAPIVBELN-VBELN,
       zORDER_HEADER_INX    TYPE BAPISDH1X,
       zPARTNERCHANGES like BAPIPARNRC occurs 0 with header line.
clear : zBAPISDHD.
so_no = '0000000045'.
data : l_comp_qty like zORDER_ITEMS_IN-COMP_QUANT.
l_comp_qty = 10.
zBAPISDHD-SALES_ORG = 'BP01'.
zBAPISDHD-DISTR_CHAN = '02'.
zBAPISDHD-DIVISION = '01'.
zORDER_HEADER_INX-UPDATEFLAG = 'U'.
zORDER_HEADER_INX-SALES_ORG = 'X'.
zORDER_HEADER_INX-DISTR_CHAN = 'X'.
zORDER_HEADER_INX-DIVISION = 'X'.
Ship to pary
zORDER_PARTNERS-PARTN_ROLE = 'WE'.
zORDER_PARTNERS-PARTN_NUMB = 'BPAFS0007'.
append zORDER_PARTNERS.
zPARTNERCHANGES-DOCUMENT = '45'.
zPARTNERCHANGES-ITM_NUMBER = '10'.
zPARTNERCHANGES-UPDATEFLAG = 'U'.
zPARTNERCHANGES-PARTN_ROLE = 'WE'.
zPARTNERCHANGES-P_NUMB_OLD = 'BPAFS0001'.
zPARTNERCHANGES-P_NUMB_NEW = 'BPAFS0007'.
append zPARTNERCHANGES.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
    SALESDOCUMENT               = so_no
    ORDER_HEADER_IN             = zBAPISDHD
    ORDER_HEADER_INX            = zORDER_HEADER_INX
SIMULATION                  =
BEHAVE_WHEN_ERROR           = ' '
INT_NUMBER_ASSIGNMENT       = ' '
LOGIC_SWITCH                =
NO_STATUS_BUF_INIT          = ' '
TABLES
    RETURN                      = zRETURN
ORDER_ITEM_IN               =
ORDER_ITEM_INX              =
    PARTNERS                    = zORDER_PARTNERS
    PARTNERCHANGES              = zPARTNERCHANGES.
PARTNERADDRESSES            =
ORDER_CFGS_REF              =
ORDER_CFGS_INST             =
ORDER_CFGS_PART_OF          =
ORDER_CFGS_VALUE            =
ORDER_CFGS_BLOB             =
ORDER_CFGS_VK               =
ORDER_CFGS_REFINST          =
SCHEDULE_LINES              =
SCHEDULE_LINESX             =
ORDER_TEXT                  =
ORDER_KEYS                  =
CONDITIONS_IN               =
CONDITIONS_INX              =
EXTENSIONIN                 =
data : s_BAPIRET2 like BAPIRET2.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
exporting
wait = 'X'
importing
return = s_bapiret2.

Thanks Prashanth. It worked !!!!!!!!!!!!!
Now I am facing another type of problem. The requirement is to change the Sales Order Item Quantity. I basically planned to update the quantity of Schedule Item which needs to be changed. When I run the below code, it works and says the Sales Order changed succesfully. However I get an express message saying the Database update failure. I don't get any sort of technical information.
Appreciate if you could help me finding the error.
Thanks
regards
girish
Note --> I am trying to change the Quantity for 2 line item in SO '56' to 40 Units.
REPORT ZBAPI_SALESORD_CHANGE.
data : zBAPISDHD       type /AFS/BAPISDHD,
       zORDER_HEADER_INX    TYPE /AFS/BAPISDHDX,
       zSALESDOCUMENT type BAPIVBELN-VBELN.
data : zORDER_ITEMS_IN     like /AFS/BAPISDITM   occurs 0 with header line,
       zORDER_ITEM_INX     like /AFS/BAPISDITMX occurs 0 with header line,
       zORDER_SCHEDULES_IN like /AFS/BAPISDSCHD occurs 0 with header line,
       ZSCHEDULE_LINESX    LIKE /AFS/BAPISDSCHDX occurs 0 with header line,
       zORDER_PARTNERS like BAPIPARNR      occurs 0 with header line,
       zRETURN         like BAPIRET2 occurs 0 with header line,
       so_no           type BAPIVBELN-VBELN,
       zPARTNERCHANGES like BAPIPARNRC occurs 0 with header line.
data : l_comp_qty like zORDER_ITEMS_IN-COMP_QUANT.
data : g_qty like /AFS/BAPISDSCHD-REQ_QTY.
g_qty = 40.
l_comp_qty = 40.
clear : zBAPISDHD.
so_no = '0000000056'.
zBAPISDHD-REFOBJTYPE = '/AFS/ORDER'.
zBAPISDHD-SALES_ORG = 'BP01'.
zBAPISDHD-DISTR_CHAN = '02'.
zBAPISDHD-DIVISION = '01'.
zBAPISDHD-PMNTTRMS = '0001'.
zORDER_HEADER_INX-UPDATEFLAG = 'U'.
zORDER_HEADER_INX-SALES_ORG = 'X'.
zORDER_HEADER_INX-DISTR_CHAN = 'X'.
zORDER_HEADER_INX-DIVISION = 'X'.
zORDER_HEADER_INX-PMNTTRMS = 'X'.
**********ITEM ***************************************
zORDER_ITEMS_IN-ITM_NUMBER = '00020'.
zORDER_ITEMS_IN-MATERIAL = 'F1202'.
zORDER_ITEMS_IN-PLANT = 'BP01'.
zORDER_ITEMS_IN-ITEM_CATEG = 'TAS'.
zORDER_ITEMS_IN-SHIP_POINT = 'BP01'.
zORDER_ITEMS_IN-COMP_QUANT = l_comp_qty.
zORDER_ITEMS_IN-TARGET_QTY = l_comp_qty.
zORDER_ITEMS_IN-TARGET_QU = 'ST'.
append zORDER_ITEMS_IN.
zORDER_ITEM_INX-ITM_NUMBER = '00020'.
zORDER_ITEM_INX-UPDATEFLAG = 'U'.
zORDER_ITEM_INX-MATERIAL = 'X'.
zORDER_ITEM_INX-PLANT = 'X'.
zORDER_ITEM_INX-ITEM_CATEG = 'X'.
zORDER_ITEM_INX-SHIP_POINT = 'X'.
zORDER_ITEM_INX-COMP_QUANT = 'X'.
zORDER_ITEM_INX-TARGET_QTY = 'X'.
zORDER_ITEM_INX-TARGET_QU = 'X'.
append zORDER_ITEM_INX.
*********SCHEDULE LINE******************************
refresh zORDER_SCHEDULES_IN.
clear zORDER_SCHEDULES_IN.
zORDER_SCHEDULES_IN-ITM_NUMBER = '000020'.
zORDER_SCHEDULES_IN-SCHED_LINE = '0001'.
zORDER_SCHEDULES_IN-REQ_DATE = '20070525'.
zORDER_SCHEDULES_IN-DATE_TYPE = '1'.
zORDER_SCHEDULES_IN-SCHED_TYPE = 'CS'.
zORDER_SCHEDULES_IN-GRID_VALUE = 'BLK2728'.
zORDER_SCHEDULES_IN-REQ_CATEGORY = '1DE'.
zORDER_SCHEDULES_IN-REFOBJTYPE = '/AFS/ORDER'.
zORDER_SCHEDULES_IN-REQ_QTY = g_qty.
append zORDER_SCHEDULES_IN.
refresh ZSCHEDULE_LINESX.
clear ZSCHEDULE_LINESX.
ZSCHEDULE_LINESX-ITM_NUMBER = '000020'.
ZSCHEDULE_LINESX-SCHED_LINE = '0001'.
ZSCHEDULE_LINESX-UPDATEFLAG = 'U'.
ZSCHEDULE_LINESX-REQ_DATE = 'X'.
ZSCHEDULE_LINESX-DATE_TYPE = 'X'.
ZSCHEDULE_LINESX-SCHED_TYPE = 'X'.
ZSCHEDULE_LINESX-GRID_VALUE = 'X'.
ZSCHEDULE_LINESX-REQ_CATEGORY = 'X'.
ZSCHEDULE_LINESX-REFOBJTYPE = 'X'.
ZSCHEDULE_LINESX-REQ_QTY = 'X'.
append ZSCHEDULE_LINESX.
CALL FUNCTION '/AFS/BAPI_SALESORD_CHANGE'
EXPORTING
    SALESDOCUMENT               = so_no
    ORDER_HEADER_IN             = zBAPISDHD
    ORDER_HEADER_INX            = zORDER_HEADER_INX
SIMULATION                  =
BEHAVE_WHEN_ERROR           = ' '
INT_NUMBER_ASSIGNMENT       = ' '
LOGIC_SWITCH                =
TABLES
    RETURN                      = zRETURN
    ORDER_ITEM_IN               = zORDER_ITEMS_IN
    ORDER_ITEM_INX              = zORDER_ITEM_INX
    ORDER_SCHEDULE_LINES        = zORDER_SCHEDULES_IN
    ORDER_SCHEDULE_LINESX       = ZSCHEDULE_LINESX.
PARTNERS                    =
PARTNERCHANGES              = zPARTNERCHANGES
PARTNERADDRESSES            =
ORDER_CFGS_REF              =
ORDER_CFGS_INST             =
ORDER_CFGS_PART_OF          =
ORDER_CFGS_VALUE            =
ORDER_CFGS_BLOB             =
ORDER_CFGS_VK               =
ORDER_CFGS_REFINST          =
ORDER_TEXT                  =
ORDER_KEYS                  =
CONDITIONS_IN               =
CONDITIONS_INX              =
EXTENSIONIN                 =
*CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
   SALESDOCUMENT               = so_no
   ORDER_HEADER_IN             = zBAPISDHD
   ORDER_HEADER_INX            = zORDER_HEADER_INX
TABLES
   RETURN                      = zRETURN
   ORDER_ITEM_IN               = zORDER_ITEMS_IN
   ORDER_ITEM_INX              = zORDER_ITEM_INX
   PARTNERS                    = zORDER_PARTNERS
   PARTNERCHANGES              = zPARTNERCHANGES
PARTNERADDRESSES            =
ORDER_CFGS_REF              =
ORDER_CFGS_INST             =
ORDER_CFGS_PART_OF          =
ORDER_CFGS_VALUE            =
ORDER_CFGS_BLOB             =
ORDER_CFGS_VK               =
ORDER_CFGS_REFINST          =
SCHEDULE_LINES               = zORDER_SCHEDULES_IN
SCHEDULE_LINESX              = ZSCHEDULE_LINESX.
ORDER_TEXT                  =
ORDER_KEYS                  =
CONDITIONS_IN               =
CONDITIONS_INX              =
EXTENSIONIN                 =
data : s_BAPIRET2 like BAPIRET2.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
importing
return = s_bapiret2.

What's Impact of changing the customer Name(along with Bill To and Ship To) at the header level after book

Dear All,
Revision: 11.5.10.2
We have a case where some of the orders we have created have incorrect customer name along with incorrect Bill To Ship To.
All these orders are booked. And their Line Status is either Awaiting Shipping or Supply Eligible.
What Impact of changing the customer Name(along with Bill To and Ship To) at the header level.
Thanks,
Helen

Hi Helen-Oracle
As said above there should not be an impact if the warehouse on the order before and after changing the customer, ship to and bill to remains same.
Additionally, if the item on-hand qty is sufficient to reserve the item and there is no B2B internal requisition kicked off.
As long as the above conditions are fine, I don't see any impact of changing the customer, bill to and ship to.
Also, you can run a complete wing to wing cycle in case you really want to test the behavior of the system in such scenario.
Please feel free to mark the response as helpful or correct if you think it is helpful and to help people easily find help and answered responses.
Thanks
Mirza Tanzeel

Please helpme "Cannot change transaction isolation level in the middle of "

sorry my english helpme!!
i am trying to insert a registry n a table in postgresql throght JAVA STUDIO CREATOR and i got the next error
Cannot change transaction isolation level in the middle of a transaction
helpme thanks you

Duplicate post. Answered in the other thread.
http://forum.java.sun.com/thread.jspa?threadID=5115855

Cannot change transaction isolation level in the middle of a transaction

por favor pido ayuda a quien sepa de la solucion de este problema, es q estoy trabajando con postgre, e intento realizar actualizaciones a la base de datos y me sale este error
Cannot change transaction isolation level in the middle of a transaction
gracias

sorry my english helpme!!
i am trying to insert a registry n a table in postgresql throght JAVA STUDIO CREATOR and i got the next error
Cannot change transaction isolation level in the middle of a transaction
helpme thanks you

PR00 cannot be changed on header level

Similar Messages

Maybe you are looking for