Premiere cs4 Not Responding after a few mins use

Hello,
I have been using premiere cs4 to make stop motion videos for awhile on this computer and have started having problems with the software.
Everytime I try to use it after a few mins sometimes 5 sometime less it goes white and says not responding resulting in having to close the program. Im starting to get late on deadlines and this is becoming a problem. Ive resorted to doing one step saving then having to close the program and repeat the process.
My system...
i5 750 OCed to 3.5ghz
8gb 1600mhz ram
I know its not the best but untill now its done this work for me fine. I am using stills at a res of 1920x1080 at 150 dpi and there are thousands of stills but again This is a new problem and I have been doing this for awhile with no issues.
Any ideas would be greatly appreciated.

Hello,
Thanks for the quick reply.
I did attempt a small batch sized as you stated but it did not help. It doesnt seem to matter what I'm working on within the program I could have no content and just click different menus and within mins the system will stop responding. That being said the final video must be in 1080p.
Here are the the items requested in the FAQ given.
i5 750 OCed to 3.5ghz also tried stock clock settings.
8gbs 1600mhz ram
2 hhd set up as follows
500gb 7400rpm hdd, program Pagefile, Media cache
1tb 7400rpm hdd, media, project file, previews
4gb virtual page file
win 7 fully updated
premiere pro fully updated
No Audio used
Ive tried various file sizes and settings to match those files all with same result.
As I state above the actual conent size, type and quantity doesnt seem to matter 3-5 mins in and it just stops responding.
Things ive tried so far.
I did extensive mem tests on my ram with no issues
reverted my over clock to stock settings
reinstall the software several times.
Also of note my ram never goes over 50% usage so Im not using all my ram.
I hope this helps i tried to include everything mentioned on the listed FAQ

Similar Messages

Any fixes for system pref not responding after a few seconds in 10.7.4?

I'm openning System Preferences both from the dock and by clicking the black apple, it opens and stops responding after about 5 second and the beach ball of death appears. Tried restarting the unit, safe boot, verify and repair disk and permissions. Always the same issue. HELP!

Running out of "moving parts"...
Two (last?) things to try.
1. Instead of launching system preferences through the menu launch it explicitly by double clicking the app in /Applications.
2. Temporarily rename ~/Library/Preferences/ByHost. For example, stick a 'x' on the end of it ("ByHostx"). I don't want you to delete ByHost. Only temporarily rename it. This is the last possible directly-related system preference data that could have a problem.
If it still hangs after this I am not exactly sure what to pursue next. It can't be a login item or launch agent since these are suppressed when booting in safe mode. You deleted the system preference cache and plist. ByHost is the only thing explicitly related in you home directory.
One other thing would be to open Console for all messages and see if anything gets displayed when launching system preferences.

Wiki does not respond after a few days

Hi,
I have set up the wiki server on a newly bought mac mini (winter 2011) running latest version of Snow Leopard. Authentication is performed through remote Open Directory and Active Directory servers. No third party software installed.
Everything works just fine for a few days (1-2 weeks), but then the server starts to respond VERY slowly. This looked like a memory problem to me (busy processor, low ram, etc), but a quick look at the Activity Monitor shows me nothing's wrong there.
I can reboot and it will go on for another few days, but I wonder if this does not hide another problem.
I'm pretty sure this is a wiki related issue, because we have identical machines, but the ones without web services run smoothly without need for an occasional reboot. Also, I did many fresh install, and the problem always came back.
Anyone has experienced something similar?

This is quite a common problem. The usual cause is inadvertent use of the "mute speech" command via the Trackpad Commander.
To toggle VO speech on and off using the Trackpad, tap twice with three fingers simultaneously.
Otherwise, you can summon up the VoiceOver command menu using VO-H-H, type "PAR" (French for "SPEech" and press Return.
For the Zoom problem, open System Preferences —> Universal Access and make sure you tick the "Zoom follows the keyboard focus" checkbox.
You might also want to experiment with the Screen Image radio buttons lower down the window:
• Continuously with pointer (some people find this makes them seasick);
• Only when the pointer reaches an edge (usually preferred); and
• So the pointer is at or near the center of the image (some people like this).
Have you thought of looking at the French language website http://cecimac.org/ ? It's full of articles and tips for beginners, all in French. There is also a very lively e-mail Forum for Francophone VoiceOver users.
Good luck,
Archie

2013 word crashes when "save as" .Word freezes "not responding after a few minutes.

2013 word crashes when using the "save as" command. It does save the document but crashes. After working for 3 minutes or so on a document the programme will stop running with the screen frozen. Have to use the windows task manager to close.
Any ideas? Very disappointed as I have already also spent a day trying to get outlook to work using all the advice on these forums. Just not impressed. I'm I going to have the same issues with excel?

Hi,
In regarding of the issue, it may be caused some reason, let's try to narrow down the root cause with the following methods:
1.Try disable all the add-ins to see if this behavior could be caused by the 3rd-party add-ins, if this behavior won't occur with all the add-ins disabled, we can enable them one by one to find out which one might cause the issue.
2.Try repair your Office as a quick fix
3.Try start Word in
safe mode to see if this behavior will still occur, if this behaivor won't occur in safe mode, the behavior might be caused by certain items that are loaded with Word.
4.Try configure Windows in
clean boot mode to check if this behavior could be caused by the 3rd-party services, if this behavior won't occur in clean boot mode, try follow the instructions in the
How to determine what is causing the problem by performing a clean boot section in the following support article:
http://support.microsoft.com/kb/929135
Here is a similar issue:
http://social.technet.microsoft.com/Forums/en-US/0d2ed46c-ba1c-4107-9651-9ff97d583720/microsoft-word-2007-freezes-when-saving?forum=word
We could try to Delete the Word Data registry subkey to test.please try follow the instructions in the following support article:
http://support.microsoft.com/kb/921541
HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Word\Data
Note: Backup your registry key before you modified.
Regards,
George Zhao
TechNet Community Support

Server app not responding after upgrading Mac Mini Server

Hi all,
I (like many of you) upgraded my Mac Mini Server yesturday. The install went well, except that when I start the Server.app, I end up with the default Server.app window and an eternal beach ball cursor... it checked into the apps and system logs and nothing coming out of Sever.app. However, there is a possible trace on slad... Anyone with similar problem or suggestions ?
thanks!

The program is unresponsive.
I looked at the console. I don't what it means but the screenshot is attached

Safari Message: Server Not Responding after 3 minutes of using.

Hi All,
I have seen the many topics on this forum asking about Safari crashing. I am having an issue - not sure if it is the same one.
After about 4-5 clicks in, Safari just hangs. If I let it time out - I get a message telling me that the Server isn't responding. This is for main websites like cnn.com, marketwatch, people, etc. Also, it seems as if when it stops, it closes off my email in Entourage but iChat is still working. I have tried firefox and sometimes it happens, sometimes not.
But if I click on the wireless icon it seems to kick things back into gear. Do you think this is a Safari problem or Airport Issue?
Thanks!!

Hi there,
I have the machine back and still having the issue. Though not as often. I am getting frustrated because I can't seem to figure it out. The machine works perfectly - they on occasion, the internet goes out. I will check and re-check my router - but we have 2 other wireless PCs (not apple) on it and no issues. The only thing I can think of is when my MobileMe Syncs - I get dropped... even off of iChat. Have you ever heard of that? I appreciate the help!

Trackpad does not respond after a second when using Keyboard

This problem is still persistent even after setting the SmartSense sliders to "off" and the Option in Mouse and Touchpad Settings to "No Delay". After researching online, some users in other blogs recommended changing the values in the registry, specifically the string called "PalmKms" to 0 value. Is this recommended, or is there another solution? I would rather not change values in my registry, as I do not know how it will affect my computer.

Mylenium
Thank you for the suggestions.
I checked the WIndows log files. It reported the following error:
The program Acrobat.exe version 10.1.1.33 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 4770
Start Time: 01d0079a09bba381
Termination Time: 13
Application Path: C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Acrobat.exe
Report Id: 4f145db6-7391-11e4-8fc1-005056c00001
I ran for the memory diagnostics as it showed the error with video card error. My NVDIA graphics card is not working properly. Do you think that could be a problem?I am running on Windows 7 64 bit computer. It also complains about the incompatibility with 64 bits.
Thank you.

Cisco Aironet 2600 not responding after changing static IP using web GUI

Hey guys, I am hoping someone can point me in the right direction with this problem I am having. Over the weekend I changed the IP address of one of our remote Access points so that it would be in the correct VLAN for the building it is in. There are already 2 other AP's in that office and so I changed the IP/Default Gateway of our newly installed AP to match. As soon as I did this, I lost connection with the AP. I can no longer ping the AP or connect to its web interface. I am able to view the AP when I do a #Show cdp neighbors detail. I can see that it has the correct IP address. But when I do a #show arp, I do not see the AP. When I do a #Show mac address-table, I can see the AP and it's MAC address as well. Does anyone know what I may have done wrong/still need to do in order to get this AP back up and running? I am unable to...
This topic first appeared in the Spiceworks Community

if the printer is shown under print in Airport Utility then select the update button.

Premiere Pro CS6 not responding after adding anything to timeline

I had been using Premiere CS6 successfully for a while, but starting a few months ago, it started not responding after I did anything. I can add a title and a transition succesfully to the timeline and it plays fine, but as soon as I add a picture or video clip, it immediately stops responding. It's frustrating because the program used to work fine before.
The only thing I can think of that might have affected it was when I upgraded to Mavericks, but I haven't read anything about any serious problems with Premiere running on Mavericks. I have a late 2008 MacBook Pro.
Thanks in advance for the help.

Go to http://forums.adobe.com/community/premiere and, in the area just under Ask a Question, type in
mavericks
You may now read previous discussions on this subject... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question
I am Windows so did not bookmark the messages, but I have seen SOME message threads with SOME solutions for SOME mavericks problems

I am going "Insane" - On windows 7 64 bit Itunes just stopped starting, it tries but gives up after a few mins - I have tried every reinstall-restart-that I can find in any forum, it still will not start up HELP

I am going "Insane" - On windows 7 64 bit Itunes just stopped starting, it tries but gives up after a few mins - I have tried every reinstall-restart-that I can find in any forum, it still will not start up HELP

Hi, ATPMolloy.
I certainly understand your frustration and will do my best to help. I see you have uninstalled and reinstalled iTunes with no change in results. I have attached an article below that specifically troubleshoots this issue that you are experiencing.
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Regards,
Jason H.

Firefox not responding, freezes, sometimes responds after a few minutes, other times a pop-up appears asking if I want to stop script - help please

firefox not responding, freezes, sometimes responds after a few minutes, other times a pop-up appears asking if I want to stop script - help please

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

HT201412 All of the sudden, in order to make the home button work on my iPad 2, I have to press it without releasing my finger and sometimes, not always, after a few seconds it responds

All of the sudden, in order to make the home button work on my iPad 2, I have to press it without releasing my finger and sometimes, not always, after a few seconds it responds. Could this be a software glitch or a hardware problem, how can I find out and fix it

Does the issue still occur if you start Firefox in Safe Mode? http://support.mozilla.com/en-US/kb/Safe+Mode
How about with a new, empty profile? http://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile

CS4 not responding...

Hi!
My adobe premiere pro cs4 is not responding after a whilewhen im working with a prosjekt.. what can that be?
My computer is brand new. I have a WD velociraptor 150 GB + WD 1 TB hard drives.Intel® Core™ i7 Processor, SAPPHIRE HD 3650 512MB DDR2 PCI-E. I think my computer is good enough to use the program..
The only thing I can think of is that Im using windows 7 a test verson, can that be a problem? It should be compatible with the OS? I`ve tried it in vista too and got the same problem som I think its a bit strange...
The not responding problem happens all the time, but not when Im opening or importing files. It happens mostly when Im using the files in the timeline, for instanse when Im moving a clip from one place to another. It also happens when Im finished rendering my work area. Im using avi format DV Pal and I have capured most of my videoes on windows movie maker . It usually dont happen before I have moved a coupple for clips or saved it to or three times. And then I have to restart the program again.
Another example is when I mute the sound in the timeline,then the program suddenly not responding again.. The strange about this is that it doesnt happen every time, or it happens every time but not when im doing the same thing.
Does anyone have a solution to this problem?
Down in the right corner it says generating peak file for.... can it be something to do with this or is it just my computer that is not good enough?
Anyone?

Hi!
Okay! I tried two converter, one says cant convert because its not avi 1 file, the other one converted it and I tried it in CS4. The clip was in about one minute long or something. I put it in the timeline and I got this red line (dont know whats it called, but know it has to be rendered). So I clicked on the rendered butten and it starts to render: Time left : probably one hour or something.. so I cancelled the whole thing..
Okay I thought if this is the problem, then I just can capture my tape again in the right way with CS4. So I tried that to. Ive attached a file where you can see the message I got.
Does anyone else has this problem too?
But I think it is strange that this can be the problem.. I have tried former versons of premiere and it has worked the with the moviemaker capture. And CS4 seems to work perfectley because I can put the clip in the timeline, press space and see the whole clip or all clips on the monitor, I can put on some effects and do a couple of things untill it suddenly just dont respond...
If the CS4 didnt work with my type of avi file, would it work so perfecly a while and out of nothing just not?
hope someone can help me, really want to get this to work!!

HT4623 why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

Garageband not responding after Yosemite upgrade

Garageband will not fully load on Mac mini (Mid 2011) and is not responding after Yosemite install and upgrade (10.10.2). Can you advise me on how to get Garageband working again?
Thank you

Hello,
Do you have some Sound amplifying App installed?
If so remove it & reboot.

Premiere cs4 Not Responding after a few mins use

Similar Messages

Maybe you are looking for