Premiere Elements 13 - crop then zoom work - output does not

New to Premiere and so probably not understanding some concepts (probably applying idea around images incorrectly to videos).
I have a an old clip I'm trying to test with - so for starters it's in 640x480, AVI format from an old Canon digicam
There is a bunch of junk on a table on the left side of the clip and I can trim some of the top as well. What I've tried:
Use Crop to remove the areas I don't want.
Then check the "Zoom" box and the remaining area "fills" the visible space in the editor - perfect so far.
But when I try to export the results to a mp4 file the results look nothing like the editor. I have some of the area from the left cropping back, and cropping i did not do on the right has now occurred so I've lost some of my actual content. I'm hoping this is a simple thing for people who use this regularly - I've had no luck on Google
Thanks in advance if you can offer a newbie some tips.

A lot depends on your source video. Some video formats are less accurately displayed than others.
What model of camcorder is your video coming from and what format and resolution is it?
What are your Premiere Elements project settings, as listed under the Edit menu?

Similar Messages

Adobe premiere elements 12 video is slow and does not match sound

after uploading the clip to edit into premiere elements 12 the video clip is slow, it doesnt match with the sound which is on point, when played back the video is choppy and skips a few clips, how to fix this please? this makes me reconsider actually buying this program, this does not happen with windows movie maker.

lingling1234
Could you please review the following and determine if you have been there and done the following.
At the onset, have you assure that you have the latest version of QuickTime installed on your computer with Premeire Elements 12?
If you go to Edit Menu/Preferences/Scratch Disks, where do you have the categories directed and how much free hard drive space is there?
Assuring project is set so that project preset (project settings) match properties of source media....
Open Premiere Elements 12 to its Expert workspace.
Go to File Menu/New/Project and Change Settings.
In the Change Settings area, change the project preset to
NTSC
DSLR
1080p
DSLR 1080p@ 29.97
Before you exit that area (in the last dialog that you see - new project dialog), make sure that you have a check mark next to "Force Selected Project Setting on This Project".
Back in the Expert workspace,
a. If you attach your camera to the computer with USB, the select Add Media/Videos from Flip or Camera/Video Importer.
In the Video Importer Source: locate your camera. Set the Save In:, put a check mark next to the videos you want imported, select the choice Add to Timeline, then hit Get Media.That should put your video in Project Assets as well as on the Timeline.
b. If you have your files saved to the computer hard drive, then use Add Media/Files and Folders to get you video into Premiere Elements Project Assets from where you drag your video to the Timeline.
Either way, do you see an orange line over the Timeline content (I am not talking about the orange line that runs horizontally through the clip). Hit the Enter key. Does the Timeline content play back in the Edit area monitor or does a Render dialog pop up? What does the playback look like and sound like in either case? Is anything improved at this point from what you were getting before?
If same as same as with the above, there would be series of questions about your computer environment.
We look forward to your results if you get a chance.
Thanks.
ATR

Adobe premiere elements 13 has stopped working message

Every time I open adobe premiere elements 13 and download any form of media, in about every 2-3 minutes when i'm editing my video, A message will come up stating that "Adobe Premiere Elements 13 has stopped working." It forces me to close the application. I went to a computer expert and he said that my computer meets all the requirements of the software and even exceeds some of them since it's only 2 years old. Why does this keep on happening to me and how do I fix it?

senseimike
Premiere Elements 13 on what computer operating system?
Have you updated 13 to 13.1 using an opened project's Help Menu/Update? If not, please do so.
Now the usual drill questions...
1. Do the problems exist with and without the antivirus and firewall(s) disabled?
2. Are you running the program as Administrator?
3. Are you using a pen and tablet device instead of a mouse?
4. Is your video card/graphics card up to date according to the web site of the manufacturer of the card. According
to the Device Manager/Display Adapters, how many video cards/graphics cards is your computer using? Are you running
a multi- monitor system?
5. Is the latest version of QuickTime installed on your computer along with Premiere Elements 13/13.1?
6. What are the properties of your source media including file extension and duration? Knowing brand/model/settings of the camera that
recorded the videos is probably the quickest way to get at that needed information. What project preset are you (manually) or the project
(automatically) setting?
7. What specific edits are you doing in the project when the program crashes/shuts down? Is there any consistency to the "stopped working"?
You talk about every 2 or 3 minutes in the workflow. But what is the size of the project by the time the problems set in....2 or 3 minutes
from the time you started the project or 2 or 3 minutes after you have been working on the project for 10 to 90 minutes?
Please review and consider the above, and then we will decide what next.
Thank you.
ATR

Premiere Elements 10 has stopped working

Actually it has not worked yet.
I just installed the Premiere Elements 10 - again, followed all the details.
My laptop is Acer Iconia 6102 dual screen touchbook
Windows 7, Intel Core i5 CPU M480@ 2.67GHz, sys mem= 4gb
Toshiba MK6465GSX disk drive, Intel HD Gaphics
The computer is new.
The dialogue says that Premiere Elements 10 has stopped working and will shut down.

This machine has only the one drive listed, nothing hidden. 512 gb free, removed some unecessary files. I did manual updates for the hardware and all software, everything is up to date. Went through the preceeding steps. There was no need to scan suorce files, I have nothing uploaded. The program will not complete its startup. The splash page pops up,dialogue flashes all the drivers and files being loaded, then quits. Does not open. The Organizer opens, but I still cant get PE to open thru it either. My computer wont allow me to change resolution. Could the fact that this machine is touch screen, dual display have anything to do with it? Using up too much resources? The resuorce monitor is idle @ 0. My Windows Movie Maker works fine.

"Adobe Premiere Elements 13 has stopped working"

I got a copy of Premiere Elements 13 on "Black Friday" (one month ago). I am using stabilization and sometimes get "Adobe Premiere Elements 13 has stopped working". I have been guessing at the problem and run several experiments - one being; stabilize a clip in it's own project and create an MP4 to use in the final project. The latest clip seems to render fine, but crashes on playback (sometimes this happened on version 12 but not so consistently and often. I'm running 64 bit Windows 7 Home Premium, with 6GB RAM, 3.30GHz, Intel Core i3 - 4 core processor. I use two monitors with the built-in video hardware. Rendering max's out all four cores while stabilization taxes the RAM. Where can I look to find out more details about this problem (only guessing with anything less)? Thanks for the help.

Ray
Thanks for the reply with further details and results.
The generalization is that you (manually) or the project (automatically) sets the project preset to match the properties of the source media.
But, if you have more than one format to import, you can still import that "atypical" format into the project (a project cannot have more than one project preset). But, the Shake Stabilizer will not stabilize it since it's properties do not match the description of the project preset. You can easily understand this by looking at the description of the project preset that has been set for the project and comparing it with specification of your video source. But, I have not yet found that such a situation creates a project/program "stopped working" as in shutting down the project/program.
I suspect a major factor when you run into a Shake Stabilized induced project/program shutdown is computer resource demands of the feature for the video which is requiring the stabilization. And, I have found that the stabilization times can be long.
Consequently, if the Shake Stabilizer does not cause the project/program to shutdown when asked to stabilize a video clip (without other effects). I am very guarded in the outcome, especially stabilization times, when the Shake Stabilizer is asked to stabilize a video clip to which other effects have already been applied.
We will looking forward to your results.
Thank you.
ATR

Premiere Elements 4.0 stops working when adding a title

Whenever I add a title, it quickly goes to "Adobe Premiere Elements.exe has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available"
What to do? Thank you in advance for any input on the matter.

Let me premise my responses by, Prem Elem had been working fine and this issue just started not too long ago
Processor: 3500+ AMD Athlon 64 processor
RAM: 1GB Free? Not sure what you mean.
Defrag space: just analyzed. All ok
OS: Vista, not sure if fully updated...need to check
QT: just updated
Camcorder: Panasonic PV-GS80
Proj Settings: Not sure what you mean, "New Project?"
I'll make sure Vista is updated. Thinking about getting more RAM. It does say 1GB for on the "System Reqs" for Prem Elem
Thanks

Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

RH 5.5 output does not work properly in RH 7

I inherited a WebHelp project created in RH 5.5. I have RH 7.
When I open the files, make modifications, and recompile them, the
output does not work properly once I put it on our hardware box.
Those infamous red squares are present and there seems to be a lot
of .js files being called, but even when I do a straight 1:1 copy
and include all the files, and delete the red squares, it still
doesn't work right.
Also, oddly, when I open the original (5.5) files in my v7 --
even without making ANY changes at all -- the TOC has
disappeared.

When you view the upgraded source files in RH7, are the red
squares seen the editor?
When you generate to a local folder and view the output
there, are the red squares present? Are there any other issues with
the generated output?
Have you applied all three patches to RH7? Help About should
show 7.0.3.

I bought Adobe Elements 12; I cannot use panorama photomerge, I have followed the directions to go to Full Edit mode in edit workspace choose File New Photomerge. However the Photomerge does not work, it does not respond. The only thing I can come u

I bought Adobe Elements 12; I cannot use panorama photomerge, I have followed the directions to go to Full Edit mode in edit workspace> choose File> New> Photomerge. However the Photomerge does not work, it does not respond.
The only thing I can come up with is that I found a blog that said that in the Trial version Photomerge does not work, however I do Not have the Trial version, I did at one time but I purchase Adobe Elements. Thank you.

The blog was incorrect. Photomerge should work in the trial, too.
When things get weird in PSE the first thing to do is to delete the prefs. Go to the editor preferences>general, click this button and restart the editor:

Redemption code from Photoshop Elements 12 purchased from Best Buy does not work 'Oops! This code doesn't seem to be active. Please contact the retailer you purchased the card from, or use a different code.' I have an invoice and the pickup notice from

Redemption code from Photoshop Elements 12 purchased from Best Buy does not work 'Oops! This code doesn't seem to be active. Please contact the retailer you purchased the card from, or use a different code.' I have an invoice and the pickup notice from Best Buy. What other information does Best Buy need? What will they do? Will I get a new box? What happened to the days of just typing in a simple s/n?

Redemption Code Help
http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

Adobe premiere element 12 doesn't work without administrator right

adobe premiere element 12 doesn't work without administrator right.
I have these 2 messages after i had selected a New project:
Premiere elements debug event
premiere elements has encountered an error
[..\Src\Core\Preferences.cpp-347]
Microsoft visual C++ Runtime library
Runtime Error
Programm:C:\Program Files\A..
This application has requested the Runtime to terminate it in an unusual way

then start as administrator.
if you want to automate that: http://technet.microsoft.com/en-us/magazine/ff431742.aspx

In Logic Pro or Pro X Meta Events don't work correctly; for example inserting Stop Playback number 52 in a specific position the playhead stops wrongly several ticks before. Then the button play does not start.

In Logic, Pro or Pro X Meta Events don't work correctly; for example inserting Stop Playback number 52 in a specific position the playhead stops wrongly several ticks before. Then the button play does not start.

Curious if what your describing is similar to issue 4 which starts around 9:15 in video...
https://youtu.be/q93jdOhi4Oc
If so this started for me, or at least I noticed it for the first time in LPX 10.1.1. What version of logic are you running?
I've recently found that this issue also affects note timing on instrument tracks that use the "External Instrument" plugin.

Headphone audio does not work. The external output does NOT appear in system preferences at all

It does NOT have a red light. I have had that issue before ad was able to fix it. My external output does NOT show up in my system preferences at all.

Pram reset
http://support.apple.com/kb/ht1379
(Try a few times as you may not get the correct sequence 1st time)
also plug headphones in a few times in case switch sticking

I purchased Photoshop Elements 13 for my Mac which does not have a cd drive. I have already installed Elements 6 many years ago. Can I still install my upgrade without using the cd's?

I purchased Photoshop Elements 13 for my Mac which does not have a cd drive. I have already installed Elements 6 many years ago. Can I still install the upgrade without using the cd?

PSE 10, 11, 12,13 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

The Power Supply Fan is still working, but does not appear to respond to increased loads, and its speed cannot be increased using SMCFanControl. Any suggestions?

Hi all - My mac pro 1,1 has an enigmatic problem. It's quad-core, 3Ghz, running OS X 10.7.5. The problem began some months back, when running HD video conferences, HD streaming videos and some other graphics-moderate (I won't say intense) uses, such as slide shows in Just Looking. My machine has an ATY, RadeonX1900 card and 2 monitors - both Apple displays, one being 30 inch 2560x1600, the other being 24 inch 1920x1200.
When I start those types of graphics-moderate apps, after about 5 minutes, something would crash (the monitors making a noise as it did) and the displays would both go black. The power did not appear to be fully cut off from the monitors. I think that the underlying applications, however, did not crash. So, I could still hear and speak to people during video conferences, and I could hear the sound tracks of videos.
Attempts to restart the computer and get the monitors back did not immediately work to undo the problem, if done straight away. The only way to correct the problem (so as to have the monitors work) was to wait for a few minutes and then restart.
After a lot of puzzled looking at console logs (and I confess that I am not an expert), I ran into a blank.
But, because of the timing of the crashes (after ~5minutes use) and restarts (after some minutes wait), I reasoned that the problem might be temperature related.
Once on that path of thought, I found this article:
http://worldtv.com/blog/guides_tutorials/fixing_an_overheating_mac_pro_no_expens e_required.php
I installed both Temperature Monitor and SMCFanControl. And I experimented, and got interesting results:
Now to the puzzling bit: SMCFanControl shows that the speed of the Power Supply Fan doesn't vary much, even if I use SMCFanControl to ramp fan speeds right up. All of the other fans react to SMCFanControl, going up to and above 2500rpm when commanded. But the Power Supply Fan does not. Having watched it for a few days now, the Power Supply Fan, according to AFCFanControl, never varies outside of a range from about 600-640 rpm, regardless of what I do with AFCFanControl.
Also (and not surprisingly), whenever the graphics-moderate apps run, when I ramp all the fan speeds up using SMCFanControl, Temperature Monitor shows that the all of the temperatures within the machine plummet, except in the power supply locations. Power Supply Location 2 is the worst affected. Because the Power Supply Fan does not react as the other fans do, the "crashes" still occur.
I could post some screen shots of the read outs of SMCFanControl and Temperature Monitor, although I think I have covered the key points in this post.
It seems that the Power Supply Fan is still working, but does not respond to increased loads.
Instinctively, I'm worried that if that's right, it might be a hard problem to fix. Any suggestions? Help! I would really appreciate them!
Cheers
P

Thanks for your response Grant. I had already read about, and I think excluded, dust in graphics card/fan/assembly as a cause. The entire inside of the computer, including the graphics card/fan/assembly, is as clean as a whistle. It looks clean. I've cleaned the dust out every now and then (including a few days ago). Also, my undersanding (derived from the article, linked in my first post) is that I might expect to see high temperatures in the Northbridge and memory module B if the graphics card was overheating. According to Temperature Monitor, however, locations do not increase in temperature when I run the relevant apps. Finally, the graphics card/assembly does not feel too hot to touch.
It is strange that SMCFanControl lists the Power Supply Fan as being software controllable, if that fan is not. Still, your comments are consistent with my observations, as the fan simply does not respond to software control.
There are two upsides: First, I've something of a work-around. I've worked out what temperature must be achieved in Power Supply Location 2 for a crash to occur, and I can watch that location in Temperature Monitor, terminating the process before that treshold is reached. Of course, that's not ideal. Second, ramping all the other fans up does significantly delay the onset of the problem, and makes recovery time much quicker.
Is there any donwside to peridically ramping up the other fans when running the relevant apps? Given that it causes all of the other locations to cool significantly, could this lessesn the life expecancy of the mahcine? (I don't want to run the fans up all the time - that's like sitting next to a jet ready for take off!)
Also, a correction to my first post: Yesterday, with all the other fans running on full and running an HD streaming video, the Power Supply Fan did, eventually, slowly, come up to ~740rpm, which is much higher than the ~640rpm maximum I had previously seen, and this may have aided delaying the onset of the problem.
I'm not sure where this leaves me? The problem might now be able managed. Well, sort-of. But it's not eliminated.

Premiere Elements 13 - crop then zoom work - output does not

Similar Messages

Maybe you are looking for