Preview window causes AE:CC to stop responding

So, I just built a new computer so I could get more horse power out of AE, but when I scrub through the timeline(with fast preview enabled and 1/4 rendering) AE will freeze and stop responding for 10 to 15 seconds. It happens constantly. Sometimes the AE program will start flashing in and out of not responding rapidly before resolving itself and then the play head randomly displaying some other area on the time line.
Here is some more context:
Computer:
Windows 8.1
i7 4770K Intel processor
Geforce GTX 780
16GB of ram
Settings:
Previews:
Fast Draft:
Available
Texture Memory:
1185.00 MB
Ray-tracing:
GPU
OpenGL
Vendor:
NVIDIA Corporation
Device:
GeForce GTX 780/PCIe/SSE2
Version:
2.1.2
Total Memory:
2.89 GB
Shader Model:
4.0 or later
CUDA
Driver Version:
6.0
Devices:
1 (GeForce GTX 780)
Current Usable Memory:
2.73 GB (at application launch)
Maximum Usable Memory:
3.00 GB
Media & Disk Cache:
Enabled Disk Cache with 100GB on an SSD hard drive
Memory and Multiprocessing:
12.9 GB for After effects
3GB for everything else
Enabled Render multiple frames simultaneously
Enabled only fo render queue, not for ram preview.
Video of it happening:
I think those would be the settings that mattered.
Anyone have any idea why is stops responding?

Version: 12.2.0.52
It has been happening sense I started.
I have not tried CS6. I am download it now to check it out.
I wish I could test it with windows 8, however I bought windows 8.1 OEM disc for my OS. So I don't think there is any way to go back. (should have just gotten 7...).
It is very possible this is an all windows 8/8.1 problem. This fourm is a similar issue that arises with the preview:
http://forums.adobe.com/thread/1312931?tstart=30
Let me know if anyone is having similar issues or has any ideas!
Update: CS6 has the same problem

Similar Messages

Kernel-Power Event ID 41: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

Hello, Currently we are seeing this issue with a couple of our Lenovo T420s laptops with a Solid State Drive. ruffly about 10 or so. The Reboots happen randomly and do not create a dump file. We have contacted Lenovo and they are
not sure why its happening. Since this Crash I set it for Minidump this did not work my next steps will be to Disable Automatic restart on System Failure to see if it brings anything up. I am also looking at using Procmon to dump to a file as well.
If anyone has any other ideas please let me know.
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
+ System
- Provider
   [ Name] Microsoft-Windows-Kernel-Power
   [ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}
   EventID 41
   Version 2
   Level 1
   Task 63
   Opcode 0
   Keywords 0x8000000000000002
- TimeCreated
   [ SystemTime] 2012-02-01T00:02:48.677610900Z
   EventRecordID 8270
   Correlation
- Execution
   [ ProcessID] 4
   [ ThreadID] 8
   Channel System
   Computer LR8K6TLC.cntr.thrivent.corp
- Security
   [ UserID] S-1-5-18
- EventData
BugcheckCode 0
BugcheckParameter1 0x0
BugcheckParameter2 0x0
BugcheckParameter3 0x0
BugcheckParameter4 0x0
SleepInProgress false
PowerButtonTimestamp 129725280988099400
Event 89, Kernel-Power
ACPI thermal zone ACPI\ThermalZone\THM0 has been enumerated.
_PSV = 0K
_TC1 = 0
_TC2 = 0
_TSP = 0ms
_AC0 = 0K
_AC1 = 0K
_AC2 = 0K
_AC3 = 0K
_AC4 = 0K
_AC5 = 0K
_AC6 = 0K
_AC7 = 0K
_AC8 = 0K
_AC9 = 0K
_CRT = 371K
_HOT = 0K
_PSL - see event data.
---- Details
+
System
Provider
[ Name]
Microsoft-Windows-Kernel-Power
[ Guid]
{331C3B3A-2005-44C2-AC5E-77220C37D6B4}
EventID
89
Version
0
Level
4
Task
86
Opcode
0
Keywords
0x8000000000000020
TimeCreated
[ SystemTime]
2012-02-01T00:02:49.270411900Z
EventRecordID
8271
Correlation
Execution
[ ProcessID]
4
[ ThreadID]
68
Channel
System
Computer
LR8K6TLC.cntr.thrivent.corp
Security
[ UserID]
S-1-5-18
EventData
ThermalZoneDeviceInstanceLength
21
ThermalZoneDeviceInstance
ACPI\ThermalZone\THM0
AffinityCount
1
_PSV
0
_TC1
0
_TC2
0
_TSP
0
_AC0
0
_AC1
0
_AC2
0
_AC3
0
_AC4
0
_AC5
0
_AC6
0
_AC7
0
_AC8
0
_AC9
0
_CRT
371
_HOT
0
_PSL
0000000000000000
Thank you.

We have tested and checked both the Bios and firmware of the SSD Drive's
Bios was up to date and no issue
Firmware was also up to date as well.
Users are still experiencing random Reboots.   I tried to capture the issue with Procmon but since the PC shutdown (Goes to a black screen no power at all even when turning the "Automatically
restart" off under Startup and Recovery) No dmp files as of yet. Unable to configure Procdump due to not knowing where the issue is and what is causing it to happen.
Going to replace one of the PC's with a New one with different hardware to see if this resolve the issue. If anyone has any idea's to be able to capture what maybe happening that would
be great.
Thank you.

Windows 8.1 Nvidia Windows Kernel Mode Driver Driver stopped responding and recovered?

I have the newst version of the 15" MBP Retina with the Haswell chip and Nvidia GT 750m. The problem I started having about 1 week ago is intermittent it seems, but involves the graphics driver when I'm in windows.
The screen goes flashes to black for about 5 seconds then recovers and the display comes back up. It just continues to do this every 10-15 seconds and the error messages displayed is "Display driver stopped responding and has recovered" below that it says Display driver Nvidia Windows Kernel Mode Driver Vers.####### stopped responding and has successfully recoverd.
What's crazy is the problem is not limited to any particular version of the driver! I used system restore and went back a few weeks just to make sure, thinking it was just a conflict with a new update somewhere. I have tried to install old versions of the 64-bit Geforce driver and it is irrelevant, the problem keeps cropping back up. I dont' know what to do, and can't even function in the Windows side hardly at all for very long.
Please help
Thanks
Robert

Hi Robert,
I dont know if this will help you, but yesterday when I logged into Win 8.1 on the same rMBP as you I got an update notice for a new driver for the NVIDIA graphics card.
This is the driver that I got the notice for. http://www.nvidia.com/download/driverResults.aspx/73780/en-us
You may want to download this and try installing it.
Good Luck

[W500 and Windows 7] ati display driver stopped responding and has recovered

Hi,
I installed Windows 7 64bit on my W500 (almost 3 weeks old). It installed a driver for the ATI display card from Windows Update. However, since yesterday, I regularly get a driver crash (I assume...).
It's happening when I'm scrolling in a webpage, suddenly the page hangs, the mouse and Windows itself hangs seconds later and after that, after 5 seconds, my screen goes black, the machine beeps and it's back. In the tray, I get an error: ati display driver stopped responding and has recovered.
In the details of the driver, the following can be seen:
Driver Date: 28/04/2009
Driver Version: 8.612.0.0
The card is recognized as a 3650.
Am I doing something wrong here? Can I test with another driver (I tried installing the Windows Vista 64bit, but it doesn't seem to be willing to install...)?
Thanks in advance,
gill

I have the exact same hardware and software (Win7 64) and I'm getting precisely the same symptoms, screen blanks out when I am scrolling a web page vertically using the trackpoint and the center blue trackpoint scroll button.
It's really annoying.
It also never happens when the laptop is in the dock, or when the integrated graphics are engaged, this only happens when the ATI chip is running and only since ATI released the new Windows 7 drivers.
Previously I'd ran this box on on Win7 64 but used the Vista 64 bit graphics drivers from ATI and didn't have the problem, but installation was a pain.

I have an HP Pavilion All-in-One PC with windows 7 and it has stopped responding.

Last Thursday my computer worked fine and Friday it stopped responding. It will open a webpage in about 20 minutes even with roadrunner turbo. Nothing works at all. I did a virus scan but I dont know what else to try. Please help me. Thanx, Shelly
This question was solved.
View Solution.

shane and shelly
This is tough to guess because there isn't a lot of information to work with. I'll provide some basic steps you can take to see if it helps. Try clearing the temporary internet files, cache, and other non-essential stuff from your system. You can do this in tools menu, then internet options. There is a good cleaning freeware program called CCleaner. I use that and it finds a lot of junk and discards it. It also cleans up the registry for you as well. If your hard drive is very full this could slow it down as well. see if there are files you can backup off the drive or delete to free up space. It's also possible that your system is dusty and dirty and it's slowing down the processor. Maybe it's time to clean the vents and see if the heatsink in the PC is clogged with dust. Heat can also slow a PC down especially if it's left on a lot so make sure it's cleaned as well.
Hope these tips help you.
I work for HP. When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!

Mini guide and little video preview window causing Black screen!!!

I now have the same issue. Pressing the B button used to give me a pip with the guide on screen at the same time as live TV in the lower right corner. Now when pressing B the small box with live TV appears in the corner but the guide goes black. Pressing B again, closes the small pip window and restores the guide - different from what it was doing before.

gate1975mlm wrote:
Everytime you bring up the little mini guide with the right arrow on your remote and then exit out of it and then bring up the big guide or any other menu like On Demand for example and then bring up the little preview window by clicking the B button on your remote the entire guide or other screen like On Demand goes completely black!! The quick fix is to restart the DVR box but as soon as you use the mini guide and then the litle preview window it happens all over again. It is happening on all 3 of my Arris XG1v1 boxes with updates 1.55.02 and 2.02p12s1. Are you guys seeing this also? I hope this will be fixed soon as I use the preview window often. Can a Comcast Tech look into this issue please. ThanksI was able to replicate the issue you have, but instead of having to reboot the box, I just pressed the "B" buton to exit out of small pic and my Guide returned to normal. Takes some experimenting...

Mini guide and little preview window causing Black screen!!!

Everytime you bring up the little mini guide with the right arrow on your remote and then exit out of it and then bring up the big guide or any other menu like On Demand for example and then bring up the little preview window by clicking the B button on your remote the entire guide or other screen like On Demand goes completely black!! The quick fix is to restart the DVR box but as soon as you use the mini guide and then the litle preview window it happens all over again. It is happening on all 3 of my Arris XG1v1 boxes with updates 1.55.02 and 2.02p12s1. Are you guys seeing this also? I hope this will be fixed soon as I use the preview window often. Can a Comcast Tech look into this issue please. Thanks

Same here, even tried other people's boxes and they have it too.

Windows Vista "The Program has Stopped responding"

Hello, I've attempting to help a friend repair his iTunes after a recent update corrupted it.
After a few re-installs, updates, edits...we've found out that some how the apple store is crashing iTunes, I say this because when the PC (windows vista) is disconnected from the network iTunes loads perfectly fine. When the unit is connected to the network, iTunes locks up while loading the store.
Any Idea on why the recent release would have broken iTunes?

After a few re-installs, updates, edits...we've found out that some how the apple store is crashing iTunes, I say this because when the PC (windows vista) is disconnected from the network iTunes loads perfectly fine. When the unit is connected to the network, iTunes locks up while loading the store.
What version of Apple Application Support does he currently have on the PC, Andy? To check, launch iTunes (when not connected to the internet). Go "Help > Run diagnostics". Uncheck every box. Click next. Does he have an Apple Application Support version 1.0.1 or a version 1.1.0?
What OS does he have? (XP, Vista or 7?) Is it a 32-bit or 64-bit version?

Preview window in Build Inspector stopped working

I installed Keynote '09 this morning to finish an iPad presentation. I've worked all day and am nearly finished, when suddenly, the preview window in the Build inspector stopped working. Now, it is not showing any of my changes and none of my new actions work properly. What did I do? How do I fix this. I am on a deadline!!!!
Using a Mac Desktop at work with OSX 10.5.8.

Well, I just seemed to have solved the problem...at least as I was experiencing it. As mentioned, I have my Motion content on an external drive, so I decided to revisit this.
I had installed all my Final Cut Studio content on the external drive using the "Content Installer" (after first installing the apps to my laptop). When opening Motion for the first time, it couldn't find the content so I manually typed in the appropriate path...or so I thought:
250GB Drive : Final Cut Studio Content : Motion Content.
Oddly enough, a few things worked this way, but not everything. It turns out I had to specifically point one folder deeper:
250GB Drive : Final Cut Studio Content : Motion Content : Motion
After doing this, all my content seems to preview, although there still are a few anomalies. Some things have to be clicked on more than once to preview, or sometimes I must preview something else first, then try the desired effect a second time. In some cases waiting quite a while produces something.
I'll try moving the cursor about as Mabou suggested and see if that makes any difference.
At least I'm getting somewhere!
Thanks,
Doug

Flash plugin is causing my Firefox to not respond--workaround?

Hi, I have Firefox 3.6.16 and Windows 7. By a process of elimination, I have determined that Shockwave Flash plugin is causing my Firefox to stop responding. The problem is that Flash is a pretty important plugin...is there any workaround for this or do I simply have to uninstall Flash (or leave Firefox!) Thanks.

This can be a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
You will have to redo App Tabs and Tab Groups after deleting sessionstore.js.
See:
* http://kb.mozillazine.org/Session_Restore

Windows Explorer Preview Panel Stops Responding

When using explorer with the preview panel open to browse thru a directory with pdf files, the preview panel eventually stops responding. After sometime the process looks like it resets (or flushes memory) and starts working again. To get it working sooner we can close explorer, kill the acrord32 processes and get back into explorer and it works. This only happens on PCs with Adobe Acrobat installed on it. PCs with only the reader on it work fine. The configures is Windows 7 (32 bit) SP1 and Adobe Acrobat XI Standard version 11.0.07. Prior to our last Window Patching users were getting the error: "Adobe Reader has stopped working A problem cuased the program to stop working correctly. Please close the program." Any suggestions on what to try?

Hi CMiz,
What is the default program for pdf files set on the computer.
Are you facing this issue with a different Admin account as well.?
Regards,
Rave

Firefox 4 appears to be causing my graphics card to stop responding for no reason, since upgrading to 4.0.

I'm not sure if its a common occurance for other users, but since the 'hardware accelerated support' with Firefox 4 release, firefox seems to regularly cause my graphics card (Nvidea GT320M) on my laptop to 'stop responding' for a few seconds every so often, usually when I have flash websites such as youtube open. It isn't a huge deal since it restarts working again after a few seconds of a black screen, but its annoying non-the-less.
An example of such: earlier today i started up firefox 4, and when it was loading the tabs, the screen turned black, and when the screen came back on, pop up in the windows task bar told me that the graphics card had stoped responding but successfully recovered. Not the first time, but becoming a more regular occurrence.

You seem to be running older versions of Flash and Java plugins. I'd recommend you update to the latest versions first of all to see whether the problem persists or not.
The easiest way to check is to go to the [http://www.mozilla.com/en-US/plugincheck/ Plugins Check] page.
If that fails to solve the problem, try running Firefox in [[Safe Mode]]. If it works correctly in that configuration, then one of your add-ons is the culprit.

IE 11 Does not load pages and "Stops Responding" After 11/26/2013 Windows Update

I have Windows 7 Pro 64 bit. IE 11. (Doesn't matter if I try to open 32 or 64 bit IE)
I keep Automatic Updates on and they install as soon as they are available.
Everything on my PC was running fine 11/25/13.
I came to it 11/26/13 after Windows Updates ran and now whenever I open any webpages, it does not load the web page 100%, no hyperlinks can be clicked on and once you attempt to click on anything. I get the "IE 11 has stopped responding" bubble.
It also seemed to affect Firefox which does not completely load pages either.
Any shove in the correct way to help solve this would be helpful.

Robert -
Anyone who has gathered over 13,000 points is certainly to be respected as being super smart and uber helpful. However, your response is inadequate on two counts.
First, "stopped working" is not an inexact phrase, nor is it a euphemism trotted out by a newbie who hasn't the skill to describe the problem accurately. "stopped working" is an exact part of the error message issued by Windows. Of course it would
help if Windows would issue error messages that are more useful, but that is a different issue. For the purposes of this discussion, "stopped working" as part of the exact error message is a useful piece of information.
Second, despite your excellent suggestions for hunting down the problem, I'm guessing that few people here have the time or inclination to be beta testers for Microsoft. Even if the exact cause is found, it is not likely that anyone here will
be able to fix the problem. There are literally hundreds of people complaining about this problem in multiple forums. If you know your consumer behavior metrics, then you know that means tens of thousands are affected. This is systemic, not
a random problem on a few errant machines. Microsoft needs to know that they have a major problem on their hands and they need to fix it. I saw this problem starting with IE 10. Is it any wonder that in that time, IE usage has fallen greatly
while Chrome has become the dominant browser? (The only reason I am bothering to write instead of just shifting to Chrome is that Chrome also has its bugs, one of which affects a web app I use several times a week, so I need a functioning version of
IE.)
So thanks Robert for all your help in the past, but this response isn't helpful.
Microsoft, are you listening? Fix your browser.

Dreamweaver CS6: Embedding Youtube Video causes DW to stop responding

HI,
I'm trying to build a simple site that displays an embedded youtube video on the main page. The video is placed in a div tag that is placed in a specific spot on the page background to make it appear as if it's playing on an old PC that's part of the image. I paste the code into the div tag in the code view and it appears as a grey box in design view. Everything seems fine up to there, however when I click live view DW CS6 stops responding and the design view window goes white. I've tried pasting the video embed code into my other page, and into a blank html document to see if it was a problem with the rest of the code but the same thing happens on any of the pages. If I save the page and preview in Chrome or Firefox the page displays the windows loading cursor for a few minutes and then returns a youtube error 6 (ERR_FILE_NOT_FOUND).
I spent a few hours researching and found nothing via Google searches, Adobe help or Lynda.com tutorials. I'm new to web design and CSS and got as far as I did through Lynda.com lessons. Which is to say I have an index page and a seperate game guide page that links back and forth displaying images and text exactly as I'd like. Everything else works well enough only the video embedding is giving me trouble which is frustrating because according to everything I've read it's supposed to be one of the simplest processes.
I'm really at a loss as to how to fix this issue and would appreciate any help the Adobe community can give me.
Thanks in advance.

Good to know,
I fixed the problem but I'm not exactly sure why this worked. I went to a different site that uses Youtube hosted videos and tried their embed code which appeared the same to my untrained eye. But to my surprise this other video worked perfectly, so I just put the url for my video in and it worked. I'm not sure why, as far as I can tell both embed codes are the same. Both use <iframe> tags. But it works now, suffice to say I've gained some respect for the people who do this stuff day to day.

A problem caused this program to stop interacting with Windows

I try to run Photoshop.exe, but it doesn't respond. I get this error message. How to fix it? I have no idea where is a problem? I had no problems with it earlier.
ERROR MESSAGE:
Description:
A problem caused this program to stop interacting with Windows.
Problem signature:
Problem Event Name: AppHangB1
Application Name: Photoshop.exe
Application Version: 8.0.0.0
Application Timestamp: 3fce5708
Hang Signature: 1875
Hang Type: 0
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1063
Additional Hang Signature 1: 3732c99c21cdca196fbfee3cc7094b85
Additional Hang Signature 2: 848c
Additional Hang Signature 3: 5c7261f725b6a443e8327138a3fe0208
Additional Hang Signature 4: 1875
Additional Hang Signature 5: 3732c99c21cdca196fbfee3cc7094b85
Additional Hang Signature 6: 848c
Additional Hang Signature 7: 5c7261f725b6a443e8327138a3fe0208
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409

I suspect a RAM or hardware problem.

Preview window causes AE:CC to stop responding

Similar Messages

Maybe you are looking for