Print Driver displayed on status page

I have recently updated the firmware successfully on this printer. It works just fine. I then downloaded and ran the software suite which had also been updated on the hp site. The printer works fine. However, the software version on printer status page (printed from the printer) indicates that the software installed is from 2010. The firmware shows the update, but not the software. How do I drive the print driver software to the printer so that is indicates correctly. I am under the impression that depending on how I have it configured, the printer will provide this driver info to a USB connected computer and it seems that it should be up to date along with the driver that is actually on my current computer. I tried the installation via USB and wirelessly and I get the same result. Help if you can.
Thnx.
John

Not sure just what you are describing.
In general with laserjet printers, a printer status page (initiated from the front panel menus, or Embedded Web Server, or Toolbox equivalent, as appropriate) should show the date of the installed firmware.
The printer itself will know nothing of the version(s) of the printer driver(s) on the workstation(s) which print to it.

Similar Messages

Acrobat Printing Driver results in blank pages

I had Acrobat 9 Pro installed under Windows 7 Professional. I uninstalled the software to move it to my Windows 7 Enterprise Operating System and apply all the updates. When I attempt to print a web page I am receiving a blank page or a one page PDF file with just the web page name at the top of the page. Moving Acrobat back to Windows 7 Professional works OK. All my other programs including CS5 work OK under Windows 7 Enterprise without any issues.
Thank you all in advance for all your help.

edbedb,
What software are you using for scanning and which HP device do you have?
Just trying to help.
Andrew

HP Officejet Pro 276dw MFP - can't connect with the printer driver (but web browser works)

Hi,
I used to own an 8500 pro which got replaced by the 276dw due to HW malfunctioning of the old model. I installed the driver (full set, win 8.1 64 bit) from the HP download area over the installed printer. I can access the printer using it's IP address. Ipad Airprint works well. The only problem is that I can't get the printer driver to connect to the printer, but the printer driver displays the printer with the correct address. Print and Scan doctor detects incomplete install and download 184MB, one bit at a time ... it will take more than an hour.
I believe - due to a message that something needs to be stopped during the install (in order to get rid of the SW for the old printer) - that this thing is stil stopped, and I need to restart that (or if it is a service I need to reset it to automatic start).
Any idea anyone?
Thanks and with best regards,
Holger

update: The Print and Scan doctor did not help, but I finally added the printer using the default windows method. So I can print, but scan to PC obviously doesn't work, and neither does the Fax printer. Help still appreciated.

Appliance printer status page

New install of iPrint Appliance 1.0.1.69. The printer status page
https://servername/PsmStatus takes a user name password but then displays
Server Error! The server encounter an internal error and was unable to
complete your request. Error 500. Either the server is overloaded or
there was an error in a CGI script.
Is this a cert error?

On 11/09/2014 21:34, stever wrote:
> New install of iPrint Appliance 1.0.1.69.
Any particular reason why you installed iPrint Appliance version 1.0.1
and not 1.1 which was recently released[1]?
HTH.
[1] https://download.novell.com/Download...d=MPaEAM3RuUE~
Simon
Novell Knowledge Partner
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below. Thanks.

Internet Printing Services - Printer "Device Status Page Error". Please Help.

I am getting Device Status Page Error :
We are unable to generate the device status page for the selected printer. Please contact your system administrator for more information.

Hi,
What’s the OS version of your server? If it’s Windows Server 2003, please try to refer to the following article to see if it could help.
"Device Status Page Error" error message when your printer tries to display a status notification message
http://support.microsoft.com/kb/884552
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

I have a HP PSC 2210 all-in-one. Can I print a status page that shows count of pages printed?

I said everything in the subject except, if there is a status page printing capability how do I do it,

Hi there,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

My Lexmark X2670 printer doesn't work right since I reinstalled the Firefox 3,6 version. I keep getting the alignment page to print over and over. Is there a problem between the two? Do I need a new printer driver? What?Daisynew66

I had to change my hrowser to Firefox because Internet Explorer 9 doesn't work with my ancestry.com program. I can't uninstall Internet Explorer 9. I got Firefox 4 and it didn't work either. I started having problems with my printer working at all then. l was told to go to Firefox 3.x. I looked and there is no 3.x it is 3.5 or 3.6. I downloaded 3.6. Now I keep getting a alignment page and end up having to shut off my printer. I'm using way too much ink. I'm almost out with no hope of getting more ink until I get paid. I can't find anyplace that says to update a driver or that I need a plug-in or what might be I've done everything I know to do.wrong. It has new port cables. Do you have any idea what could be wrong? Do I need to uninstall the printer and reinstall it again? daisy

I just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

When I open a pdf in Adobe Acrobat xi pro it is not displaying correctly. If a file is all black with orange writing, I will see only the orange writing. Its not until i print it or open crop pages dialog box that i see the background. i am on a Windows 7

When I open a pdf in Adobe Acrobat xi pro it is not displaying correctly. If a file is all black with orange writing, I will see only the orange writing. Its not until i print it or open crop pages dialog box that i see the background.
i am on a Windows 7 professional PC, 64-bit.

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

I cannot get my MacBook Pro to print greyscale on my Canon MG6450. I cannot access the printer driver panel on the Macbook. So I am stuck printing everything in colour and cannot specify which pages I want printed.

I cannot get my MacBook Pro to print greyscale on my Canon MG6450. I cannot access the printer driver panel on the Macbook. So I am stuck printing everything in colour and cannot specify which pages I want printed.

Try resetting the printing system:
OS X Mavericks: Reset the printing system
Next try deleting the system and reinstall the printer..
BTW this is Mac Pro desktop forum

How to print a PDF file that was display in my page...

Hi !. My doubt would be the following one... I would like to know how to print a pdf file that was displayed in my page ?... I mean the PDF file not the page...
The PDF would be in this url:
http://iprodesa.lasegunda.com.ar:8090/datos/pdf/830.pdf
How could I implement this ?...

This first question which comes to mind is how do you display the pdf file in the browser?
For this the browser uses a plug in (e.g. adobe reader) which already has the ability to print the pdf file. Depending on the version of your plug in, printing is started differently.
Timo
Ps: which jdev version do you use?

Check Print Header will not display on each page

I am creating a check print template for R12 and it works great for single page remittances. However for multi-page remitttances the Header information does not want to display on all pages of the remittance. When it goes to a new remittance the first page of that remittance is correct. I have an @section in the first group and there are no page breaks, but it still ignores the header.
Any Ideas?
Thanks,
Dan J

this is the typical answer that everybody asks check he CFIDE
folder, but guess what, the folder is accessable and all the script
files can be loaded by the browser but still ... no cfform flash
displayed.
need more support for this issue, i can use all the cfform
features accept when trying to enable the format=flash and this is
what isnt processing correctly,
the developement server works fine but production server
doesn't and the CFIDE directory has the right file permissions and
is assessable to the browser.

Status page before and after print jobs managed by Jetdirect.

Hey Guys I am receiving an extra page before and after every print job.
Printers are managed from Jetdirect Printer Installer for Unix Version E.10.34
Server has Sun OS 5.10
I have like 19 printers but only 5 HP CB516A are having this problem.
The Print Message displayed is :
Start: fpec4050-2729 Tue Nov 11 15:41:18 EST 2014
End: fpec4050-2729 Tue Nov 11 15:41:18 EST 2014
Its not a major issue but its a nuissance and wastes pages and ink
Any assistance for a resolution to this would be helpful.
Thanks.

@deff
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Printer Driver Problem? Page margins shift when using paper tray vs. manual feed

I am printing to an Apple LaserWriter 12/640 PS. The printed page and page margins are PERFECT (WYSIWYG; "What you see is what you get") when printing either to: (a) the MANUAL FEED TRAY of the Apple LaserWriter 12/640 PS; or (b) PDF to view on screen.
HOWEVER, when printing to the LaserWriter using the (ordinary/usual) paper cassette (you know, the thing that holds the 200+ sheeets of blank paper), two margin problems occur: (1) the uppermost portion of page content is shifted down 3/4" (maybe closer to 11/16") vs. its position on the manually fed paper. This, in turn, causes the botttom portion of the page content to run off below the printed page. (2) The "unprintable region" on the right edge of the paper expands from 1/8" with the manually fed paper to 7/16" when using the paper cassette. This shows up as an extra 5/16" (7/16" - 1/8" = 5/16") of white space/missing page content on the right edge.
The problem is consistent and reproduceable. It happens with cassette fed output from Safari, Word 2011, Acrobat X, TurboTax, Quicken Essentials for Mac, and TextEdit.
BIG problem when printing long documents whose content and margin settings I cannot control (e.g., third-party documents from Acrobat, anything from Quicken Essentials or TurboTax, pages from Safari, etc.). The only workaround is to feed everything manually (UGGH!).
I suspect the printer driver is faulty since the problem detailed above happens with so many applications. Is there a way to edit a plist (using the application/utility "Pref Setter" or similar) to overide the driver's margin settings?
I believe the print driver is "Apple LaserWriter 12/640 PS v2015.105" (from Sytem Prefences->Print&Scan->Options and Supplies->Driver).
Any help greatly appreceated.

Thanks! It works perfectly! I even saved my original "oversize" document by printing it to PDF with the scaling so the problem is permanently cured, at least for this document.

Display Approval Status on the page

I have a pages library, where i have content approval turned on. I want to display the OOTB Approval Status( Internal name: ModeratorStatus) column in the pagelayout in read only mode. Any ideas??

Hi,
According to your post, my understanding is that you want to display Approval Status on the page in read only mode.
You can insert the JQury code to a Content Editor Web Part:
<script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.10.1/jquery.min.js"></script>
<script type="text/javascript">
$(function(){
setTimeout(Test,500);
function Test(){
var obj1=$("div[name='_ModerationStatus']");
obj1.removeAttr("SortFields");
</script>
Then you cannot click Approval Status to sort items and the HTML of the Approval Status becomes as below:
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Printer Device Status Page Error on IPP site

I have print services on Windows Server 2012 Datacenter. When I go to the IPP site and click on a printer that has a Device Status link under the View section, I receive an error,"Device Status Page Error...We are unable to generate the device
status page for the selected printer. Please contact your system administrator for more information". This happens on all our printers that has a Device Status link. And the printers are different models and some are type 3 and type 4. I have tried accessing
the ipp page on Server 2012 and Windows 7 and it still gives the same errors.

You are correct about Microsoft not creating a hotfix for this issue in current versions of Windows. Microsoft support replied to me and indicated the following:
Hi Tiffany,
Thanks for your reply.
After consulting with our product team, we will not fix this issue in the current product consider the many changes involved. but we might
consider it to the next generation product.
Thanks for your understanding and cooperation. Please feel free to let me know if there is anything else that we can help.
Best Regards,

Print Driver displayed on status page

Similar Messages

Maybe you are looking for