Appliance printer status page

New install of iPrint Appliance 1.0.1.69. The printer status page
https://servername/PsmStatus takes a user name password but then displays
Server Error! The server encounter an internal error and was unable to
complete your request. Error 500. Either the server is overloaded or
there was an error in a CGI script.
Is this a cert error?

On 11/09/2014 21:34, stever wrote:
> New install of iPrint Appliance 1.0.1.69.
Any particular reason why you installed iPrint Appliance version 1.0.1
and not 1.1 which was recently released[1]?
HTH.
[1] https://download.novell.com/Download...d=MPaEAM3RuUE~
Simon
Novell Knowledge Partner
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below. Thanks.

Similar Messages

PRINT STATUS PAGE BLACK IS FINE COLORS NOT OUT OF PLACE CM1312NFI

Hi my Name is Max
on color laserjet CM1312 nfi , the quality is bad when i print Supplies Status Page : the square looks good but the color Cyan Magenta and Yellow are out off the squar
and I change the transfer belt but still doing the same

Hard Reset – While printer is powered ON, pull
the power cord from the printer then from the
wall. After 30 seconds reconnect power to
wall and printer. This will trigger a ‘dirty power
up’ and restore the printer to a known good
condition (if it is possible). No user settings
are lost with a ‘hard reset’.
This ‘Hard Reset’ is one of the most powerful
tools to use when the printer hardware is not
functioning properly!
if not resolved, uninstall hp software &
reinstall using latest hp software from hp
website.
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

Print Driver displayed on status page

I have recently updated the firmware successfully on this printer. It works just fine. I then downloaded and ran the software suite which had also been updated on the hp site. The printer works fine. However, the software version on printer status page (printed from the printer) indicates that the software installed is from 2010. The firmware shows the update, but not the software. How do I drive the print driver software to the printer so that is indicates correctly. I am under the impression that depending on how I have it configured, the printer will provide this driver info to a USB connected computer and it seems that it should be up to date along with the driver that is actually on my current computer. I tried the installation via USB and wirelessly and I get the same result. Help if you can.
Thnx.
John

Not sure just what you are describing.
In general with laserjet printers, a printer status page (initiated from the front panel menus, or Embedded Web Server, or Toolbox equivalent, as appropriate) should show the date of the installed firmware.
The printer itself will know nothing of the version(s) of the printer driver(s) on the workstation(s) which print to it.

I have a HP PSC 2210 all-in-one. Can I print a status page that shows count of pages printed?

I said everything in the subject except, if there is a status page printing capability how do I do it,

Hi there,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Printer Device Status Page Error on IPP site

I have print services on Windows Server 2012 Datacenter. When I go to the IPP site and click on a printer that has a Device Status link under the View section, I receive an error,"Device Status Page Error...We are unable to generate the device
status page for the selected printer. Please contact your system administrator for more information". This happens on all our printers that has a Device Status link. And the printers are different models and some are type 3 and type 4. I have tried accessing
the ipp page on Server 2012 and Windows 7 and it still gives the same errors.

You are correct about Microsoft not creating a hotfix for this issue in current versions of Windows. Microsoft support replied to me and indicated the following:
Hi Tiffany,
Thanks for your reply.
After consulting with our product team, we will not fix this issue in the current product consider the many changes involved. but we might
consider it to the next generation product.
Thanks for your understanding and cooperation. Please feel free to let me know if there is anything else that we can help.
Best Regards,

Internet Printing Services - Printer "Device Status Page Error". Please Help.

I am getting Device Status Page Error :
We are unable to generate the device status page for the selected printer. Please contact your system administrator for more information.

Hi,
What’s the OS version of your server? If it’s Windows Server 2003, please try to refer to the following article to see if it could help.
"Device Status Page Error" error message when your printer tries to display a status notification message
http://support.microsoft.com/kb/884552
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

What is the USE for a TEST PAGE/Printer Status REPORT

Have you read post or forums and a tech wants you to see if you can print a test page or Printer status report?
This is a test to make sure the printer's function is working correctly. Sometimes you can't print from your printer and everything is stuck and you may think it's the printer. If you can print this test page, then most likely it will be a software issue or connection issue.
The information contained in a test page can help diagnose a printer problem or to review information particular to the printer. Test pages can be printed by using the print control panel or the computer.
The print test page function prints a page with several cartridge print patterns and a numbered list containing printer specific information.
I hope this is helpful to the community.
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.
This question was solved.
View Solution.

Thanks for reading.
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Hp all-in One remote prints test page but cannot find printer for anything else

The HP All-in-One application can print test pages on my 8610 but when I go to any document or photo and try to print I get the following message "This Printer is not available." I have checked and have the latest version of the HP All-in-one Printer Remote application and the HP Print Service Plugin applications from the Google Play store. I am using a Samsung Galaxy 5 running Android 5.0. If I print a page from my laptop using wireless to this printer, I can see the All-in-One application tracking my printer status so I know it can see the printer. The app on the phone will show the status under the printer name going from Ready to Unavailable to Ready as a document is printed and then finished. I am printing directly with local WIFI and am not using the ePrint feature.

Hello , Welcome to the HP Forums!
I hope you have a pleasant experience here. I'd like to help you with the issues you are having printing from your Samsung Galaxy S5 to your HP Officejet Pro 8610 e-All-in-One printer. Firstly, do you have the printer plugged directly into a wall outlet? The printer has a power moderator built in, so if it is plugged into a power surge bar or battery backup it may be getting inconsistent power. This can cause all kinds of firmware glitches (like the printer status not being broadcast properly). If that doesn't immediately resolve the issue, please follow the steps below: Network Power Reset: Let's leave the router on and unplug the power cable (NOTE: Do not reset the router.), then do the same with the printer, and shut down the computer. After a full minute, plug the router back in, wait for it to fully power up, then plug the printer back in and wait for the wireless light to become solid. Once both the router and printer are on, go ahead and turn the computer back on. Doing this will refresh the network connection. Restore Network Defaults and Reconnect: 1. On the front panel of the printer, touch your wireless icon at the top2. Select Settings.3. Select Restore Network Defaults.4. Restart your printer.5. Once it's booted back up, touch the wireless icon again.6. Select Settings.7. Select Wireless Setup Wizard and follow the prompts to enter your wireless network details.8. Try enabling the web services again. Another thing I would suggest, would be to download the HP ePrint app, rather than the All-in-One Remote. The Remote is moreso suited for scanning to your phone from your product, so I would suggest trying the ePrint app (you can download it from the Play Store). If the issue persists after these steps, please answer the following questions so I'm better able to assist: Are you able to print reliably from any other devices on your network?What brand and model of router are you using?What is it that you are trying to print? (ie. E-mail, photo, document)What app are you printing from? (Some Android apps have a direct printing feature)I look forward to hearing back from you and working towards a resolution to this issue!Have a great weekend.

Can only print one page at a time

Using Adobe Reader 9.4.2
Operating system Arch Linux
Printer Brother DCP-115C
When trying to print more than one page at a time in a PDF document,
Adobe Reader appears to create the print
the print job appears in my print queue
the printer says 'Receiving Data', but only momentarily
the printer resumes 'normal' status
the printer does not print anything
It is as if there is very little data actually sent to the printer, even though the print job appears to be 254k in size
When I try to print one page at a time from a PDF document
Adobe Reader appears to create the print
the print job appears in my print queue
the printer says 'Receiving Data' for several seconds
the printer prints the page
no problem
It seems to me that Adobe is creating a print job (for multiple pages) that the printer either does not understand, or the printer believes that there is nothing to print.
I am able to print everything that I need to, but only one page at a time!
Does anyone else experience this problem? Do you know how to overcome this?

You can use printPages(1, 5), however I need to know how you print current page.

HP Deskjet 3050 All-in-One Printer J610a is printing blank pages

Your HP Deskjet 3050 is printing BLANK PAGES?
The printer ejects blank sheets of paper when printing. Some or all the printed pages might be partially blank or half printed. It can be the software that you are printing from or program. Sometimes it can be the actual print head needs cleaning or cartridges are low.
Here is a link that will provide you with steps that will get the issue resolved. In this document you will have different Operating Systems. (Windows XP, Windows Vista, Windows 7 and Mac OS X) Software.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02744420&tmp_task=solveCategory&cc=us&dlc=en&lc...
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.
This question was solved.
View Solution.

Yes, the link is down.
See if you can print a self-test page or printer status report from the printer itself. If so, then it is a software or connection issue.
If you can print test page, try to use a different USB cable. Also, you can uninstall and re-install the software and drivers.
If you are NOT able to print a test page from the printer, try to clean the cartridges with lint free cloth and water.
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Cannot print multiple pages

I am unable print multiple pages after I upgraded Acrobat 8 Professional. Worked fine with Acrobat 7. I receive a pictwpstops stopped with status 1 message.
G4 iMac
1.5 GByte Ram
Tiger with latest updates
Adobe CS2 with latest updates and Acrobat 8
Brother MFC-5840CN printer with MFC-5840CN CUPS v1.1 PDD / driver (latest available)
I have removed my local fonts, reset printers, reinstalled printer/PDD files, repaired disk permissions to no avail.
Why is this happening and how do I resolve this? This is our proofing printer.
My CUPS debug output is given below.
*** Job 1 ***
D [04/Feb/2007:08:28:57 -0500] [Job 6] Error: /undefined in YDVGLJ+Times.New.Roman.Bold050*1
D [04/Feb/2007:08:28:57 -0500] [Job 6] Operand stack:
D [04/Feb/2007:08:28:57 -0500] [Job 6]
D [04/Feb/2007:08:28:57 -0500] [Job 6] Execution stack:
D [04/Feb/2007:08:28:57 -0500] [Job 6] %interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push 1 3 %oparray_pop 1 3 %oparray_pop .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval--
D [04/Feb/2007:08:28:57 -0500] [Job 6] Dictionary stack:
D [04/Feb/2007:08:28:57 -0500] [Job 6] --dict:1059/1123(ro)(G)-- --dict:1/20(G)-- --dict:83/200(L)-- --dict:120/174(L)-- --dict:54/73(L)-- --dict:212/315(L)-- --dict:72/107(L)-- --dict:0/10(G)-- --dict:0/10(L)-- --dict:2/50(G)-- --dict:56/71(L)--
D [04/Feb/2007:08:28:57 -0500] [Job 6] Current allocation mode is local
D [04/Feb/2007:08:28:57 -0500] [Job 6] Last OS error: 2
D [04/Feb/2007:08:28:57 -0500] [Job 6] ESP Ghostscript 7.05.5: Unrecoverable error, exit code 1
E [04/Feb/2007:08:28:58 -0500] PID 1268 stopped with status 1!
E [04/Feb/2007:08:28:58 -0500] PID 1267 stopped with status 1!
E [04/Feb/2007:08:28:58 -0500] [Job 6] error drawing page 2
E [04/Feb/2007:08:28:58 -0500] [Job 6] pictwpstops - got an error disposing of document = -9783
D [04/Feb/2007:08:28:58 -0500] [Job 6] ERROR during execution of pictwpstops. Error number -9783
*** Job 2 ***
D [04/Feb/2007:00:06:09 -0500] [Job 5] cups->header.Duplex = 0
D [04/Feb/2007:00:06:09 -0500] [Job 5] cups->page = 2
D [04/Feb/2007:00:06:09 -0500] [Job 5] cups->ppd = 0x1103b80
D [04/Feb/2007:00:06:09 -0500] [Job 5] cups->ppd->flip_duplex = 0
D [04/Feb/2007:00:06:09 -0500] [Job 5] width = 4950, height = 6450
D [04/Feb/2007:00:06:09 -0500] [Job 5] PageSize = [ 612 792 ], HWResolution = [ 600 600 ]
D [04/Feb/2007:00:06:09 -0500] [Job 5] HWMargins = [ 9.000 9.000 9.000 9.000 ]
D [04/Feb/2007:00:06:09 -0500] [Job 5] matrix = [ 8.333 0.000 0.000 -8.333 -75.000 6525.000 ]
D [04/Feb/2007:00:06:09 -0500] [Job 5] Contrast_Bright() pdev->dm.dmPrivate.epBrightness = 0
D [04/Feb/2007:00:06:09 -0500] [Job 5] Contrast_Bright() pdev->dm.dmPrivate.epContrast = 0
D [04/Feb/2007:00:06:09 -0500] [Job 5] Error: /undefined in YDVGLE+Helvetica-Bold
D [04/Feb/2007:00:06:09 -0500] [Job 5] Operand stack:
D [04/Feb/2007:00:06:09 -0500] [Job 5] false
D [04/Feb/2007:00:06:09 -0500] [Job 5] Execution stack:
D [04/Feb/2007:00:06:09 -0500] [Job 5] %interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push 1 3 %oparray_pop 1 3 %oparray_pop .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval--
D [04/Feb/2007:00:06:09 -0500] [Job 5] Dictionary stack:
D [04/Feb/2007:00:06:09 -0500] [Job 5] --dict:1059/1123(ro)(G)-- --dict:1/20(G)-- --dict:83/200(L)-- --dict:120/174(L)-- --dict:54/73(L)-- --dict:212/315(L)-- --dict:72/107(L)-- --dict:0/10(G)-- --dict:0/10(L)-- --dict:2/50(G)-- --dict:56/71(L)-- --dict:1059/1123(ro)(G)--
D [04/Feb/20

> a PDF/X-1a setting has fixed the problem
I still have the problem with more simple kinds of PDF: 150 dpi, no PDFX. I can not print multiple pages.
Furthermore I can not use the option
"print screen view" (in german language), both affects the
Reader 8 AND the Acrobat 8: it always only prints the first page of the document without any scaling.
Finally I can not use the printer
"Adobe PDF": it results in an endless spool action to that printer.
Yesterday Acrobat 8 was deinstalled with the
deinstaller. The
new installation failed first because of a missing CD. The "AdobeExtendScriptToolkit2.0.1All.dmg" could fix the installation problem.
After successfull re-installation neither before nor after the update to Acrobat 8.1.0 the printing errors mentioned above were solved.
What can we try next?
===
OSX 10.4.10., MacPro1.1, Dual-Core, Intel-Xeon
Creative Suite CS2 and CS3
===
Weird hint: None of our three older G4 (10.4.10, CS3+4, Acrobat 8.1.0) has this printing or any other Acrobat problem. - So, is it even hardware related??

Get the Print Status of Reports - D2k/Reports Ver.6

Dear sir,
We are developing all the systems with oracle products. We are facing following technical problem in reports version 6.
1. During continuous cheque printing and pay slip printing in a pre-printed paper, kindly suggest what is the command/procedure to be used for printing sub-sequent pages continuously without any misalignment.
2. After the cheques/pages are printed, we have to identify printed cheques/pages status thro' the reports so that we have to update proper tables based on the printed cheques/pages.
We are badly need the solution for the above problems. Our development activity is standstill due to the above problems. I am expecting expedite reply.
With Regards.
(P.JEYAKUMAR)
PROJECT LEADER, ERP.

Printing checks & recording payments is a bit tricky but can be done with triggers and proper formating.
Too bad you aren't interested in hearing the solution from a mere woman.

Canon Pixma M860 only prints partial pages

Hi,
Thanks in advance for your assistance. I had to take my computer in because of several stalling issues, and had to unhook my printer to do so. It was working fine then. When I plugged it back in, the printer won't work properly; it only prints partial pages. I checked the ink supplies, and they are fine. I cleaned the heads, they too are fine. I tried to open the Solution Menu, but it comes up blank. Can you help? I'd sure appreciate it!

No problems with the response times. I just noticed a huge delay with trying to reply to you and I'm using Firefox.
Okay, to answer the three replies...
Question: after this, how will I know where to go to add my printer queue again? I'm sorry, I don't quite know where/how to do this? Do you mean I just try to print some things again?
I need you to add the printer queue again by opening Print & Fax and clicking the + button under the now empty Printers list. If the printer is connected to the Mac via USB cable then you can select the Default icon and then select the MX860 in the list. This should automatically change the Print Using menu to 'Canon MX860 series'. You can then click Add to complete the printer queue creation.
If the printer is wireless instead of USB then please let me know as the procedure is a bit different to the above.
Also, you mentioned that the Solutions Menu isn't really needed. I had just hoped the troubleshooting button it is supposed to have could be of some use in repairing my printer, but it doesn't sound like it from what you say here? If not, that's okay. Just wondering.
To be honest I've never installed the Solution Menu so I cannot comment on how well the troubleshooting information is. Since I feel I know more than these guides ever provide then I've never felt the need to use them. For you it could be handy but having read other Canon guides I feel that they can confuse the user more than help them...
They just did the Repair Disk thing and it was better for oh, about a minute. I realize that's not the issue we are discussing; I just mentioned it to let you know I'm responding as quick as I'm able, and just in case you think Safari's weirdness might be affecting the printer somehow.
At this stage I would say that Safari is not the problem but the sluggish operation you are noticing when using it could be an indication that something is using resources on your Mac and this could also be impacting the printing. In this situation I would suggest a Mac user to check the Activity Monitor. This will show you every little background service that is currently running on your Mac and one or more of these services could be the culprit. An example would be the previous printer software. With older drivers many vendors install services with their drivers to provide users with information, such as ink status, because the then current OS did not provide them. This is fine when you have that printer connected but when it is removed and you use a different printer, especially from a different vendor, then these services can cause performance issues for the new printer.
Okay, I'm heading home now but I will log in again after dinner to see how you're going...

Photosmart 7520 - How to view on screen the printer status report

How do I view on the monitor or printer screen the 'Total pages printed' figure, which otherwise I need to frequently print out via "Maintain your computer>Device reports>Print Status report"? I'm using HP Photosmart 7520e, wireless connected, Windows 7 Ult. Thanks.
This question was solved.
View Solution.

Hello emmandell,
Welcome back to the HP Support forums. I understand that you would like to learn how to view your page count without having to print a Printer Status Report.
The information can be viewed online using the printer's embedded web server (EWS). Please follow the steps below:
1)       Press the wireless icon on the front panel of the printer to find the printer's ip address.
2)      Type the ip address of the printer into the address bar of your browser, this will bring up the EWS. I recommend that you bookmark this web page for future use. Then please click on 'Tools' tab.
3)      Click on 'Reports' along the left hand side menu
4)      This will print up a usage screen with the total page count shown across the top
Hope this helps you save on ink and paper.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

"print this page" firefox crashed. How can I get back to that page?

Sending my ipod nano in for repair. Lost the page at the end that needed to be printed and brought to a ups store. Now I can't seem to get back to that.
Can I just print out the status page or something? I didn't even get to see what information was really on it.

I did it all online so I haven't contacted tech support yet, but it looks like I might have to for this simple little issue

Appliance printer status page

Similar Messages

Maybe you are looking for