Printer won't print B/W Word document, but prints B/W from internet

Hi! So,, I know that all 3 of my color cartridges are almost empty, but the black one is more than 3/4 full. Yesterday, I was able to print just fine. Today, I tried to print a Word document that has a small color logo with the rest of the text in black. Only the color logo printed, the black text did not. I then tried to print just a B/W Word document, but that didn't print at all I also tried printing a document with text in color and text in B/W....the color text printed, B/W did not. I've taken all the cartridges out and I shook all of them, this also didn't help. I did a printer head cleaning and that didn't help. I just tried to print a document from the internet, with both color and B/W and that document printed fine (although the black text looks more gray). I also changed the text color on the original document from black to blue and it printed just fine. Any suggestions on what the cause of this would be? I would understand if the color wasn't printing because those are almost empty, but the black one is almost totally full so there shouldn't be an issue with that. Thanks in advance for any help/suggestions that anyone can give me.

Hello Dwan2,
Welcome to the HP Forums.
I see that you are attempting to print just in black ink.
Here is a screen shot that I think will help you with this issue.
Please feel free to write me back if you have any other questions or concerns.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Similar Messages

I can print word documents but can not print email messages

i can print word documents but can not print email messages
I am using an officejet 4500 wireless on Windows 7

I called HP and after being on the phone for 1 1/2 hrs They reinstalled my printer and I printed an alignment page without then I tried to print arouble I was also able to scan a page to HP. When I tried to print something from my email it barely printed 2 faded lines and that was it I openrd my word documents and was able to print a clear copy. HP told me my cartrige was empty so I changed my cartridge with no results it was the same. I use refill CATRIDGES AND NEVER HAD ANY PROBLEMS but they told me they can ruin a printer. I told them I would purchease new HP cartridges and they we agreed they would call me back on Monday to determine if my problems were solved with the new cartridges. What I don't understand is how I can print documents but not emails. HELP

Trying to convert pdf documents in Spanish to word documents but the converted file prints gibberish

I have been trying to convert PDF documents in Spanish to Word documents but when I down load the converted word document it does not convert in Spanish it is totally unreadable "gibberish" I have tried clicking on recognizint the lenguage and do not recognize text but I still get gibberish?
is it possible to convet files in spanish?
Can anybody help?
Thanks
Olga

Hi frysky
Please Refer : http://forums.adobe.com/message/5200374#5200374

I have converted a PDF to a word document but how do I save it to my computer

I have converted a PDF to a word document but how do I save it to my computer

Hi debrat84859140,
To save that converted file to your computer, you just need to download it from your Acrobat.com account:
Log in to your account at https://cloud.acrobat.com/files.
Select the file that you want to download.
Click the Download link at the top of the file list. Your file will be downloaded to the Downloads folder on your computer.
Best,
Sara

I have tried to save a Pages document to a Word document but it does not work. Plse advice !

I have tried to save my Pages document into a Word document but I keep on running into trouble = it does not work ! Anyone can help me ?

mossenane wrote:
Name of Pages document is RoomscheduleSTAYATBROMMA#2-?
I'm afraid that your choice if names is the problem. Try "RoomSched2X", or similar, and let us know how it goes. If that works you can try some other names of your own choosing.
Jerry

L7680 All-in-one, won't pick up paper and print when sending MS word Document to printer

This printer has worked great for over 2 years. If I do a print test page it works fine. It prints out a fax confirmation page fine. When I send a document from MS word to printer I can hear it trying but it won't pick up paper. Says empty, add paper yet there is paper in bed. I have done all the tests suggested by HP. partial reset, tried reloading software, cleaning, adjusting, etc. Any Ideas would be appreciated

Hi,
From your post, you indicated "cleaning"... have you cleaned the rollers as described in step 4 of this document?
Printer doesn't pick up paper
Paper fiber "build up" occurs on older printers and rollers occasionally need cleaned.
Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
I am employed by HP

Why can't I print WORD documents created on my MACBOOK from a PC?

Our daughter is unable to print documents created on her MACBOOK from a PC. She has been saving her documents as WORD files, but the PCs in the university computer lab still do not recognize the document, and consequently she cannot print them from the computer lab PC.
We have experienced the same difficulty when creating a document on the MACBOOK, saving as a WORD document, then sending it as an e-mail attachment. The friends who receive the document on a PC cannot open these documents.
Any suggestions?

Reset iCloud sync state
On Mac:
Close open applications
Open a Finder window
Choose “Go to Folder…” from the “Go” menu
Enter “~/Library/Application Support/”
Find the folder named “Ubiquity” and move it to the Trash
Restart your computer

Word document pdf printing with vertical and horizontal pages

I have a Word document that has both vertical and horizontal formatted pages. When I print to PDF, the I get a new pdf file whenever a page orientation change is found. pages 1 to 7 are vertical, 8 to 12 are horizontal and 13 to 20 are vertical again. If I print to a file named "out_to_PDF" I get 3 files named "out_to_PDF", "out_to_PDF2" and "out_to_PDF3", the first one with pages 1 to 7, the second one with pages 8 to 12 and the third one with the remaining pages. Is there a way to get only one file with all the pages?
I know I can merge the files later. This file with 20 pages is no problem. I have several 70+ page docs, with multiple changes between horizontal and vertical that will result in 20 or more separate pdf files.
Any pointers?

Word renders print jobs that change the orientation as separate print jobs. So, each print job becomes its own PDF.
You can make an Automator workflow to combine PDFs. I’m not sure how it decides the order it combines them, so you’d have to experiment.
This is built as an Application where you’d drop all of the PDFs onto the App icon and it will open the combined PDF where you can edit, name, and save.

I cannot print word documents but can print all other documents

Since updating my virus checker I cannot print word documents. I can print all other documents

At this point my suggestion is to do a full uninstall of the old print driver and an install of the most recent version print driver which you can obtain at:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=40664...
Please follow the uninstall procedure before installing the new driver.
Regards,
Eric
I am an HP employee.

Is there a way to automatically display a Word document in Print Layout view?

I am using Report Generation Toolkit (v.1.0.1). After displaying the report, the view in Microsoft Word is always "Normal." It would be really nice to automatically show it in "Print Layout" view. (i.e. in Word, go to View >> Print Layout) Is there a way to do this programmatically through the vi? I'm using LV 7.1 and Windows 2000. Thanks,

Hey dj143
The best way to do something like that is with property nodes.You can do this the easy, by going into word and recording a macro. Then look at the macro and duplicate it using property nodes.here is a vi that I did for you that answer your question
Joe.
"NOTHING IS EVER EASY"
Attachments:
printview.vi ‏44 KB

Acrobat XI Pro Won't Convert 206 Page Word Document into PDF

Hi there
As menetioned above, Acrobat XI Pro Won't Convert my 206 Page Word Document into a PDF. The Word document was originally a PDF file that I converted to Word and it has split all the text into sections.
It sounds like converting a PDF into Word isn't the best way to edit, re-format and then save as a PDF again. I would love to hear your advice on this.
Thanks very much for your help!
Fiona

First before you recreate the PDF from the Word Document.
In word: Open Document
Next open a new Blank docment
switch back to Word click on the ¶ button
scroll to of go to very end of docment.
click just to right of the perion in the last sentence.
now go to very beginning of document
Hold down the Shift and click to the right of first letter in document.
Now choose copy.
Now switch to Blank document
Choose Paste special.
Now choose Text only.
If works all the words will be there spaced correct but with no ¶'s.
Now insert returns as desired.
Now save as a docx file under a different name.
IF you are on a Mac use the following directions:
go to File menu > Print > PDF Hold down PDF button until Context menu pops up.
Choose adobe PDF.
follow steps when the first window opens.
Save as PDF in desired location.
Now open the PDF in Acrobat. Document should be properly formatted and ready to go.
AS you've found The conversion is not seamless. Acrobat doesn't distingish between automatic end of line breaks and Returns and you have to put the pieces back again. I wish Adobe and MS would get over the jealouscy of each other and share howcode works so Thatapplications could work seamlessly together. BUt they never will.

HP 7510 AIO printer won't stay connected - Wired workstation, wireless printer

Hi! I spoke (and checked solution button) too soon. The printer still "disappears" from the Wired XP network workstation. The only difference since applying the solution given is that the disconnects are now happening about every 12 hours, vs every couple of hours.
Ink notification is set to "only when I print"
Static IP is set for all machines
HNDU works -- when the printer is visible but will hang the workstation if printer is not visible.
Original comments follow below;
HP 7510 wireless printer disappears -- 4 station XP wireless network, w/ 1 PC hardwired.
Options
04-12-2012 03:59 PM
Printer: HP 7510
Network: multi-station wireless, thru DLink DI-632 (one PC hardwired to router)
Address Config:   Printer is using static IP -- outside of DCHP range (192.168.15.240)
Printer Config: Each computer has static IP set into the control panel app, using IP addressing.
Operating System: XP (Service Pack 3)
Other devices: Ipad, Xoom and Kindle Fire (all working using ePrint)
Network Security Protocol: WEP (we're out in the country)
Network Setup: Main router, along with 2 access ports (hardwired); currently using channels 1, 5 and 11 (again, we're in the country and have little competition for channels)
File Sharing: All machines in network have one open "share" drive, accessable with passwork.
Scenario: Wireless computers appear to stay connected for several days to a week at a time. (We reboot weekly, just as a SOP)
Computer that is wired to the network loses communication with the printer a couple of times a day and needs to be rebooted in order to restore connection.
When this happens, other machines continue to print and scan, with no problems, and the wired machine continues to have its name displayed in the SCANNING panel on the printer -- but the printer won't talk to it.   All network functions, including internet and intranet access to the printer's EWS is still available. I have noticed that if I go into check ink levels, though, that the ink check software behaves differently.
Normally in the ink status app, there is a small "working" icon with 6 dots. When this computer is connected properly, it will start jumping around the circle, showing activitiy, get to 41%, and then display the ink status info. When the printer/computer connection is not working, the "working" icon will go to just a couple of percent then jump to the printer information page, showing make, model, serial number, firmware level etc.
In every instance so far, rebooting (with no other action) brings the printer/computer connection back to life -- until next time. I am trying to find any other pattern for this behavior, just can't identify it yet.
I started out with the plain vanilla installation, but then every computer in the network would consistently drop connections, about every 45 minutes. Using the info on this forum, I've eliminated the drop-outs for those printers, and got to the Static IP solutions (we've done that anyway for years with net-ready machines). This is the last machine that "drops off" It appears that some piece of HP-required software is "dropping out" or getting clobbered, but I cannot see a pattern, even checking and noting the various software used locally on the machine, and the various websites visited. So far, no pattern.
I am hoping that an HP guru with access to the source for the "ink supply" status software can take a look at what is happening and why it will always go to 41% and then display ink status (when connected) and then only go a couple of percent and display the ink status (when it isn't connected).
Thanks, in advance,
jim
Solved! Go to Solution.
Add Tag...
Quick Reply Reply
jimzix
Honor Student
Posts: 4
Registered: 04-03-2012
Message 2 of 5 (65 Views)
Report Inappropriate Content
0
Re: HP 7510 wireless printer disappears -- 4 station XP wireless network, w/ 1 PC hardwired.
Options
04-13-2012 01:48 PM
More info:
In last paragraph, above, the request for "ink status" is returned with a static display of the printer firmware version, driver version, step level, MAC# etc of the printer, not "ink status" when the printer is disconnected.
Also, when printer is disconnected the HP home networking utility will hang the system -- a hard reboot is required, which restores the printer, until the next time it goes "into the woods". Signal stregth, measured on the printer, is 4 bars (very good).
Add Tag...
Quick Reply Reply
007OHMSS
Master's Graduate
Posts: 1,302
Registered: 08-12-2009
Message 3 of 5 (41 Views)
Report Inappropriate Content
1
Re: HP 7510 wireless printer disappears -- 4 station XP wireless network, w/ 1 PC hardwired.
Options
04-20-2012 09:30 AM
Not sure if this would help, some of the info could be pertinent:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149924&tmp_task=solveCategory&cc=us&dlc=en&la...
007OHMSS
I am a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.
Add Tag...
Quick Reply Reply
jimzix
Honor Student
Posts: 4
Registered: 04-03-2012
Message 4 of 5 (25 Views)
Report Inappropriate Content
0
Re: HP 7510 wireless printer disappears -- 4 station XP wireless network, w/ 1 PC hardwired.
Options
04-22-2012 09:53 AM
Thanks! That appears to solve the problem. After your suggestion, I remembered that I set the "ink level warning" on this machine ONLY to "Always warn me", as opposed to "tell me only when I am printing". That seemed to be the problem. Only the computer that was set to "always warn on low ink-levels" was disconnecting -- the others worked fine! Now, all are working fine.
Just to be safe, though, I've also turned off the "scan from printer to computer" function on each computer. That was set for each machine, and seemed to work fine. The other machines in the network did not disconnect, and the printer was tracked whether each computer was on or off.   May try to turn it on later; I'll see if the family uses that feature very often!
Thank you for your help.
Jim
Add Tag...
Quick Reply Reply
jimzix
Honor Student
Posts: 4
Registered: 04-03-2012
Message 5 of 5 (17 Views)
Report Inappropriate Content
0
Re: HP 7510 wireless printer disappears -- 4 station XP wireless network, w/ 1 PC hardwired.
Options
04-22-2012 03:56 PM
I spoke too soon! After about 26 hours, the printer connection on the one "hard-wired" CPU dropped, which is better than before, but still not solid. Same exact symptoms as before. Only piece of the puzzle that was different this time is about 50 pages were scanned, some to this computer. Used the "Scan requested from CPU" process, rather than enabling the "Scan TO Cpu" function in the software app. It did not drop the connection immediately after -- about 1 hour to 1.5 hours afterwards. Suspect this is a coincidence, not a cause of the problem with this machine.
I also scanned (same approach) from one other CPU on the network -- that wifi connection is still rock-solid.
Jim
Add Tag...
Quick Reply Reply
This question was solved.
View Solution.

I think it is fixed now.....the problem seems to reside in the module that will notify you immediately if ink is low (vs notify me only when printing). If, when initially installed, the user selects "immediately", then the printer will randomly disappear. (More on "re-finding it" later.)
Also, it is difficult to change the ink notification setting, because it appears not to be "sticky", but will sometimes, flip. (I've not figured this out yet). As long as the setting for "low ink notification" is on "only when printing", life is good.
If the printer does disappear, go over to the Advanced tab when the printer software/firmware page comes up, instead of the current ink levels. Reset the selection about "tell me about ink notification" to "only when printing", and then toggle the "autoshut off" from "NEVER" to "2 hours" and then, finally, back to "NEVER". Then, lastly, press closed on the panel. Printer should be connected again. To test, go to the Photosmart 7510 app again, and select "Show estimated ink levels". The counter will start at 1%, jump to 41% and then bounce around until it displays the ink level.
FOR HP TECH: Please consider making the "ink level notification" persistent in the registry OR provide a de-install tool that will completely clean all traces of the prior installation of the 7510 driver / app in the registry, so that a new install may have this setting saved correctly.
Hope this helps some of you -- it's an excellent printer once its running!
jim

New c4680 photo smart all in one printer. won't pick up paper to pull into printer.

HP C4680 Photo Smart All in One Printer.
Just out of box. At point in set up to print "allignment" page, but printer won't pull paper in. Goes thru the motions, but
won't pick it up. Something not working right in paper feed mechanism. Any suggestions/solutions?

Hi there @dhengr!
Thanks for contacting the HP Forums!
I can see your having a print quality issue with your HP OfficeJet 6310. I should be able to provide documentation that will help locate a resolution. You mentioned you have already tried another HP95 tri-color cartridge with no resolution. I also noticed you said that the quality report from the printer also has no color ink.
If a stand alone test report is performed from the front of the printer such a printhead cleaning or print quality report and there is no color on the page then you are likely looking at a hardware issue within the printer. I have provided a document regarding Missing, Faded, or Dull Colors on the HP Officejet 6310 All-in-One Printer. If you follow the document from start to finish and still have the same issue then I would recommend contacting our HP tech support via phone. They deal with hardware warranty and replacement options.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a great weekend and thank you again for posting on the HP Forums!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

Unable to save Word documents when accessing them directly from the site because the document never converts from a read-only even though the User chooses to enable editing

Issue has only popped up recently and cannot reproduce in a Test environment. Unaware of any SharePoint changes, so hoping someone can point me in the correct direction.
Previously Word document did not have to be physically checked out, but rather the editing of the doc also checked out the doc in a document library. This is the way we want it to remain –
no manual check-out process. Now if a doc is edited without being checked-out, there is an issue with the process as the application thinks the doc is read-only (message received when trying to save the doc) even if enable editing is selected. The
following message appears when you try to save the document:
This message can appear if you have been editing a file that was opened as read-only. A file opened as read-only will have (Read-Only) appended to the file name as it appears in the title bar of Word. You can still save the document, but you must
save it by using a different file name. If you use Windows Explorer to change the read-only properties of the file, while the file is open in Word, it will not enable Word to save the file. Word must open a non-read-only version of the file in order to save
it by using its original file name. If you have not made any changes to the file, you can close it, and then use the following steps to make the file writeable. 1. Click the File tab, and then click Open. 2. Browse to the file and right-click it. 3. Click
Properties, and then clear the Read-Only check box. 4. Reopen the file. If you have made changes to a read-only file, you can save it, and then use the following steps to give the modified file the original file name. 1. Click the File tab, and then click
Save As. 2. Enter a different file name, and then click Save. 3. NOTE: Adding "Rev1", or "Mod1" to the original file name may help you to remember it later. 4. Click the File tab, and then click Close. 5. Open Windows Explorer. 6. Browse
to the original read-only file. 7. Rename the read-only file. 8. Browse to the new file. 9. Rename the new file to the name of the original file. Do not delete the read-only file until after you have determined you no longer need it.
Previously, when check-out was optional, a file was checked out automatically when someone opened it for editing, unless it was already checked out. The editing commands notified the User that the file is being/was checked out. The real issue is the
word doc can no longer be saved as the application still believes the doc is read-only.

Hi,
According to your description, you give the domain admin full control over files on the old file server, but you cannot move the files to the new file server. After pull the files from the old to the new file server, the domain admin can only read the files
on the new file server.
How did you move the files from the old file server to the new file server? Did you setup replication between the two file server or use robocopy?
Please check the files permissions on the new file server to see if the permissions are changed, then share the folder on the new file server to everyone to see the result.
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How at send a Word document as an email attachment from an ABAP program?

Hi all,
i got request to develop background run program which check which staff is due CONFIRM and able to attach confirmation form (Microsoft Word file) to HR and CC staff manager as recipients.
I try almost all relevant FM but still face problem below, please assist.
1) FM SO_DOCUMENT_REPOSITORY_MANAGER
- A window pops up requesting Recipient email ids. I couldn't get the window suppressed.
2) FM SO_NEW_DOCUMENT_ATT_SEND_API1
- Since the attachment is a pre-formatted Word Document and not an Excel or Text document, couldn't process the contents into the internal table (most sample in forum is Excel not word)
Appreciate ABAP folks who have sample code attach a word file will help on this.
Thanks and regards,
Felicek

Hi ,
sorry for my request but I have to send an e-mail with word attachment and I would appreciate if someone could give the code for
the first part of this link: http://www.divulgesap.com/blog.php?p=ODI=
(I mean 'ZDIV_SEND_EMAIL' ) . The problem is that I have to load in an internal table the file word (by using "open dataset in binary
mode" I suppose ) and then pass this table to a FM or a method for sending e-mail with this file WORD but I 'm facing some
problems.... any suggestion would be very appreciated ... I'm in a "impasse" ! It's seems there is no way out !!!
Thanks in advance
Andrew

Printer won't print B/W Word document, but prints B/W from internet

Similar Messages

Maybe you are looking for