Printing won't start at top of paper, starts at mid point with header in correct place at top.

I am using Firefox 3.6.17 (tried Firefox 4 and went back to 3 several weeks ago) on a Vista laptop computer. Yesterday printing changed from normal to: the headers appear correctly on the page, but the primary part of the page or email message starts at the vertical middle of the page, continuing as half pages until printing finishes. Not only does this waste paper but the appearance is poor. My printer is a Canon Pixima IP90 but the same problem is evident if I print to PDF via Adobe Acrobat 8 standard or PDF Converter Professional. The printing function is fine with other applications (such as Word Perfect).

Try the '''''reset''''' described here: <br />
http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer

Similar Messages

  • When I want to play music out loud the volume bar disappears and it won't play music or any sound. This sometimes happens with head phones in aswell. How do I fix it? I have tried to reset settings and wipe all the data of it but it didn't work.help!

    When I want to play music out loud the volume bar disappears and it won't play music or any sound. This sometimes happens with head phones in aswell. How do I fix it? I have tried to reset settings and wipe all the data of it but it didn't work.help!     

    Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
    Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
    If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
    Let us know how you get on.

  • HP Photosmart D7260 Printer, won't feed from the photo paper tray.

    On my parents computer they use a HP Photosmart D7260 Printer and I'm trying to print off on photo paper but for some reason it keeps on feeding from the main tray I can't for the life of me figure out how to fix this i've been though all the settings changed the paper to the right kind , in all the options, there's no reason why it should not work. Can any one give me any ideas how to fix this?
    Please help

    form HP site
    Macintosh OS X Solution
    For the Macintosh OS X operation system, use the following process;
    1.
    Select HP Photosmart 8200 series from the Printer drop down menu.
    2.
    Select the appropriate media size from the Paper Size drop down menu.
    3.
    Specify printable area of the job using the Print Size drop down menu. Below the Print Size menu, other adjustments can be made to fine-tune the print job using the check boxes.
    4.
    Select Print from File menu.
    5.
    Select Paper Type/Quality from the Copies & Pages drop down menu.
    6.
    Click Paper tab.
    7.
    Select Photo Tray from Source drop down menu.
    8.
    Click Print .

  • My hard rive has increasingly been getting louder, and the update that Apple has to get rid of it, my computer says it's not necessary and won't open it. Suggestions? Its a mid-2010 with 10.9.2 pro

    My hardrive has been increasingly getting louder, and in a search under Macbook Pro services I found my problem, but they said to install the Hard Drive Firmare 2.0. After I downloaded it when it opens under installer, a pop-up says 'This update is not necessary for this computer' and then it autmatically closes the installer. Apart from taking it in to the store (which I will probably have to end up doing), are there any suggestions?

    Nilsene,
    perhaps your hard drive already has that firmware version installed? That could explain why you’re getting the “this update is not necessary for your computer” pop-up.
    Are you making regular backups of your hard drive? Its increasing volume might be an early warning of an approaching disk failure, so if you’re not already doing so, I’d highly recommend purchasing an external disk for use as a Time Machine backup destination — that way, in case of a sudden failure, you won’t permanently lose all of your personal files.

  • New c4680 photo smart all in one printer. won't pick up paper to pull into printer.

    HP C4680 Photo Smart All in One Printer. 
    Just out of box.  At point in set up to print "allignment" page, but printer won't pull paper in.  Goes thru the motions, but
    won't pick it up.  Something not working right in paper feed mechanism.  Any suggestions/solutions?

    Hi there @dhengr!
    Thanks for contacting the HP Forums!
    I can see your having a print quality issue with your HP OfficeJet 6310.  I should be able to provide documentation that will help locate a resolution.  You mentioned you have already tried another  HP95 tri-color cartridge with no resolution.  I also noticed you said that the quality report from the printer also has no color ink.  
    If a stand alone test report is performed from the front of the printer such a printhead cleaning or print quality report and there is no color on the page then you are likely looking at a hardware issue within the printer.  I have provided a document regarding Missing, Faded, or Dull Colors on the HP Officejet 6310 All-in-One Printer.  If you follow the document from start to finish and still have the same issue then I would recommend contacting our HP tech support via phone.  They deal with hardware warranty and replacement options.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html 
    Have a great weekend and thank you again for posting on the HP Forums!
    Cbert
    I work on behalf of HP.
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

  • Officejet Pro 8600 Premium won't print cardstock - error message of "out of paper" appears

    My printer won't print cardstock, the error message says "out of Paper".  I have tried 3 different types of cardstock and it won't accept any of them.  It will print on plain paper.  Is this machine defective?  HELP...URGENT
    I must be able to print cardstock.  The computer was just set up today...it is brand new and purchased directly from HP.

    After trying a lot of different things, for some God-only-knows reason, this is the trick that worked for me. This is really more of a hack than a true fix, but I'm not picky when it's 2 AM and I don't have any other options:
    (1) In the paper tray, alternate one sheet of the cardstock paper with one sheet regular plain paper. Make sure the tray is full, but not over-full. (This HP help article says not to do that but... whatever.) 
    (2) In the Print dialogue box (however you can get to it) select the "Plain Paper" preset (not "thick paper" or "cardstock"). I had it on "Best" as you can see it the screen shot, but I don't think this is important.
    (3) I only had a single-page document, which I needed to print 30 copies of, so I inserted a blank page as a second page in the document file (a pdf).
    (4) I then made sure "Collate" was selected in my print settings.
    If you have a multi-page document, maybe you will need to insert a blank page every other page... which sounds like a pain, and I feel for you.
    Note: You'll need to monitor the printing closely - if ever the printer pulls two pages through instead of one, you'll need to pull the paper tray out and add a piece of paper so it's alternating correctly. 
    With this, I was able to print multiple copies without ever stopping. After a full day of fighting with the printer (which may or may not have included sacrifices of limbs under a full moon to the printer gods... just kidding) this was like magic.
    Hope this works for you - or other people who read this thread. This is a really frustrating situation.
    PS. Before I did this, I also did a full reset of the printer, which included:
    1. Turning off the printer and unplugging it for a full minute
    2. Printing 100 blank pages
    I have no idea if this helps, but if this hack isn't working for you, this "reset" is worth a try.

  • Terminal Service - enable the "Start the following program at logon" cause my remote printer won't redirected?

    After I enable the "Start the following program at logon" on my User account windows 2003 Server R2 cause my remote printer won't redirected when the Remote User is logon to the Server, I don't know why? I checked the Terminal Services Configuration already
    and everything is fine.
    And for you information, If I disable the "Start the following program at logon", the printer is redirected again, did I miss something in here?
    Thanks
    dkirwan

    Hi,
    I suspect that this application conflicts with Terminal printer redirection, whether all applications using "Start the following program at logon" option have this
    issue or not. You may try another application to see if the issue is gone.
    If your client PC is Windows XP, you may need install the Remote Desktop Connection 7.
    http://support.microsoft.com/kb/969084/en-us
    Technology changes life……

  • Printer won't load photo paper from the photo tray

    My HP C7280 won't load the 4x6 photo paper from the photo tray.  The photo tray moves in towards the feeder, but fails to actually load the paper into the feeder.  Any suggestions on how to correct it?  Thank you.
    Mike
    This question was solved.
    View Solution.

    Hey,
    Please take some time and look through this document to make sure that you are loading the paper properly,
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01662562&tmp_task=useCategory&cc=us&dlc=en&lc=e...
    These are the Macintosh instructions but the steps to prepare the photo print are the same but they are steps you would do on Windows just ignore the instructions.
    Have a great day. Get back to me.
    I worked for HP.

  • Have C4795 Photosmart printer. When printing 4X6 photos , the print starts halfway across the paper

    When printing 4 X 6 photos on C4795, printing starts halfway across the paper, leaving
    a half-page of blank.  How do I realign to correct this?
    Thanks, John

    Binary Zen - thanks for your reply.  I'm using iPhoto on a brand new iMac.  Just upgraded from an iMac G5 that I've been using
    for 6 years.  So, new software.  Also new printer, to me, just set up on wireless network.  I had successfully printed photos on this printer using my old iMac, but the new iPhoto software is different, and doesn't seem to give me some of the print options I'm used to, such as selecting 'draft' for quick and dirty printing, etc. 
    One interesting note: I reread the printer manual, which said to slide the left slider against the paper.  That moved the start point on the print to about 1" in from the leading edge instead of half-way across the page.  Now all I have to do is figure out how to move it over another inch.  I'm starting the photo paper exactly on the marks on the paper tray.
    Suggestions welcome!  Thanks, John

  • Printer won't grab paper

    I have a HP deskjet 2050 all in one. I changed the ink and now the printer won't grab the paper. It will go down about 3 inches and stop. The printer acts like its really printing but nothing on paper . Is there some one here can help me.?? Thanks

    The printer may have a hardware issue that has developed in the paper feed mechanism.
    Please see the document located here for steps to help troubleshoot a no feed issue.
    Hope this helps.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • My MacBook Pro randomly froze during a sync to my iPhone and started making a scratching noise by the power button. I shut it off then turned it back on and it won't take me to the desk tops it will just flash a folder with a question mark in it. What do

    My MacBook Pro randomly froze during a sync to my iPhone and started making a scratching noise by the power button. I shut it off then turned it back on and it won't take me to the desk tops it will just flash a folder with a question mark in it. What do I do?

    You have a HDD problem (hopefully you have a backup).  Start with the information on this support article:
    https://support.apple.com/kb/TS1440
    Ciao.

  • "print won't fit paper"

    I attempted to print a photo from iPhoto and was met with this message in red: "The selected print size will not fit the current paper size". No matter what size paper I select,4X6, 8X10 or letter it doesn't change. Then if I proceed anyway the next thing that comes up is the wiggly rod with the "processing" banner under, overlaid with a block saying no subject has been selected.In Page Setup, reducing to 75% doesn't change anything. Odd, since I've printed from iPhoto before and never seen this problem.Is there a logical solution?
    G5 iMac   Mac OS X (10.3.8)  

    I attempted to print a photo from iPhoto and was met with this message in red: "The selected print size will not fit the current paper size". No matter what size paper I select,4X6, 8X10 or letter it doesn't change. Then if I proceed anyway the next thing that comes up is the wiggly rod with the "processing" banner under, overlaid with a block saying no subject has been selected.In Page Setup, reducing to 75% doesn't change anything. Odd, since I've printed from iPhoto before and never seen this problem.Is there a logical solution?
    G5 iMac   Mac OS X (10.3.8)  

  • Printing photos from my computer using hp 6520 printer won't pick up photo paper.

    I have a new HP 6520.  When I try to print photos from my computer, I get an error message that the paper tray is empty.  It does not pick up the photo paper and print.  Help!!!

    1. My paper tray(s) are propertly loaded, I'm not a novice. 2.  The bottom tray is LOADED properly.  3.  The UPPER PHOTO TRAY is also loaded properly, shiny side down of course, properly filled and pushed forward as far as it can go. (It worked fine an hour ago when I printed a couple of photos). 4. Now no matter what I do, how I specify photo paper size, IT ONLY PRINTS OUT ON REGULAR PAPER FROM THE BOTTOM TRAY (8"X10") ordinary paper!! 5. When I UNLOAD the bottom tray, in an attempt to "fool" the device so that there's is NOTHING BUT photo paper, I get a prompt telling me I must load the paper before it will print the photo!  Of course when I reload the bottom tray with the ordinary paper, it still prints out the photo FROM THE BOTTOM TRAY PAPER!!   I'm wasting ink and paper and I'm not happy. I was on the phone for more than 2 hours two weeks' ago getting the first NEW printer set up and it was decided by all four techs I spoke to that I indeed needed to have a new device. 6.  I received this replacement device just 4 days ago, another couple of hours speaking to India, finally worked ok, even unti earlier this evening but NOW it will NOT use photo paper from the upper tray. WHAT IS GOING ON WITH THESE TROUBLESOME HP6520'S?   I had a Photosmart 560 for years until it "died" a few weeks' ago and since then, this is my story with this product. You can check with India tech support to find my complete dealings with them vis-a-vis this product.
    AND when I tried to sign up for this support 3 times I got refused telling me that the screen name I offered was already taken. Apparently the app was taking my information from when I may have signed up a couple of years' ago when I had an issue with my Photosmart 560.

  • HP OfficeJet 6310 All-In-One printer won't print in color with new cartridge

    HP OfficeJet 6310 All-In-One printer  on a iMAC  OSX version 10.9.5 system
    Hello,
    As I don't print in color much but had need to I discovered my printer not printing in color.  I trouble shooted and even replaced with an new HP95 new from Office Depot ( I never buy refilled).  The printer still won't print color but it advances the paper as if it was printing - just no ink on paper.  I have cleaned thoroughly the ink jet heads, cartridge area, and run all the alignment and printer utilities.    The test page print does not show color either.   I have no error messages.  Don't know what else to do.
    thanks
    DH

    Hi there @dhengr!
    Thanks for contacting the HP Forums!
    I can see your having a print quality issue with your HP OfficeJet 6310.  I should be able to provide documentation that will help locate a resolution.  You mentioned you have already tried another  HP95 tri-color cartridge with no resolution.  I also noticed you said that the quality report from the printer also has no color ink.  
    If a stand alone test report is performed from the front of the printer such a printhead cleaning or print quality report and there is no color on the page then you are likely looking at a hardware issue within the printer.  I have provided a document regarding Missing, Faded, or Dull Colors on the HP Officejet 6310 All-in-One Printer.  If you follow the document from start to finish and still have the same issue then I would recommend contacting our HP tech support via phone.  They deal with hardware warranty and replacement options.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html 
    Have a great weekend and thank you again for posting on the HP Forums!
    Cbert
    I work on behalf of HP.
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

  • We installed a new router and changed the name of the router. Now my HP C4500 printer won't print.

    Our cable company installed a new wireless router and changed the name of the router.  Now my HP C4500 printer won't print from my laptop.
    I can't find any ot the Set Up stuff I used initially.
    Is there any way to get my printer to work again...wirelessly?

    Get the latest software for your printer from the "Support & Drivers" link at the top of this page.  When you start the installation it will ask what kind of installation you would like.  Choose "Wireless" or "Network" then click "Next".
    Eventually it will ask you to plug in a USB cable to the printer temporarily to communicate the new router's info to the printer.  Make sure to not plug in the USB until it asks.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

Maybe you are looking for