Pro 100 Won't Print Borderless

I've tried printing out of image garden, out of InDesign, out of Photoshop, out of Illustator, as a PDF but nothing seems to make my printer want to print borderless.
I've tried A4, 5 x 7, custom paper sizes, images that are exactly the size of the paper but nothing seems to be working.
Am I missing something?

What paper are you using?: From Canon website:
"6.5 or later or Canon ImageBrowser 6.5 or later for "MOV" files, or Canon ImageBrowser EX 1.0 or later for "MOV" or "MP4" files.
Envelopes, High Resolution Paper and certain fine art papers are NOT supported for borderless printing."
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Similar Messages

Canon Pixma Pro 100 won't print

Hopefully someone can help. I just purchased a new Pixma Pro 100 and diligently set it up using a USB connection to my laptop (Windows 8, 64 bit). The printer printed the alignment page fine, but won't print anything else (including a Test Page from the device Properties box). I immediately get an on scree error message when trying to print.
Any thoughts out there?

Unplug the printer for 15 minutes. Unplug it from everything. Don't use My Image Garden. Use Easy Photo Print EX (came with your printer) or some other program.
EOS 1Ds Mk III, EOS 1D Mk IV, EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 85mm f1.2 L II USM, EF 70-200mm f2.8 L IS II,
Sigma 120-300mm f2.8 EX APO, Photoshop CS6, ACR 9, Lightroom 6

HP Officejet pro 8500 won't print and keeps asking for a proxy setting. Help.

HP Officejet pro 8500 won't print and keeps asking for a proxy setting. Help.

Hi,
Can you confirm that you have an Officejet 8500a or Officejet 8500? On the 8500a model, you can set the networks proxy address and port setting from the front panel of the printer (setup>Webservices setup>proxy). If you are unsure what your proxy settings are you'll need to contact your network admin. If your network uses a proxy users name and password for all devices, you need to enter this information along with the proxy address and port in the printers embedded web server. Type the products IP address into an internet brownser window (printer must be connected to the same network as PC). Select the network tab, and than look for the proxy settings option. Enter in the information and click apply. Once the networks proxy information has been correctly inputed into the embedded web server, try printing again. If unsuccessfully, you might try reinstalling the printer software after uninstalling it. Hope this helps!
I was an HP employee
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

Office jet Pro 8600 Printing 8 1/2 x 5 1/2 Cards won't print borderless

Using windows 7 operating systems have tried using many programs to print from. Always choose borderless. The best we have done is elementate the border on 2 sides. I don't know what else to do. Anyone have any ideas? These are invitations for a party so a quick response would be appreciated. Thank you

Thank you MalsMom,
I suggest that you update the firmware following the steps in this document on Getting the Latest Firmware and Product Updates.
Here are the instructions for setting up borderless printing from the Officejet Pro 8600 User Guide page 43.
Print borderless documents (Windows)
1. Load paper in the tray. For more information, see Load media.
2. On the File menu in your software application, click Print.
3. Make sure the printer you want to use is selected.
4. To change settings, click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties,
Options, Printer Setup, Printer, or Preferences.
5. Click the Paper/Quality tab, and then click the Advanced button.
6. In the Borderless Printing option, click Print Borderless, and then click the OK
button.
7. In the Media drop-down list, select the appropriate paper type.
8. Click OK, and then click Print or OK to begin printing.
Let me know if this helped.
Thank you,
I worked on behalf of HP.

Pixma Pro 100 : Unable to print 13x19" from Apple Macbook Pro

I've got the latest drivers and firmware.
Primarily attempting to print from Apple Aperture; A3 and A3 borderless work fine, but neither use the available space on my 13x19" paper.
Any custom settings for 13x19" result in either A) 3x5 print on 13x19 paper, or B) out of paper alert (1006?).
I also tried printing from adobe photoshop elements 6; there was a "super B" paper size here, but again the prints either printed borderless 13x19" but with poor random cropping, or I got the no paper error, depending on settings. Same results when printing from Apple Preview.
So far the largest print size I've gotten successfully is 11.6x16.6" using A3 borderless.
How can I get a 13x19" print or largest size? Thanks

The fix for mine was to go into system preferences, printers & scanners, then remove all references to the Canon printer. This also removed the apple drivers.
Then, download all drivers from Canon's site to your desktop.
Then in the printers & faxes pane, click plus, and select the printer from there- you may need to select the drivers on your desktop. Somehow this forced install of the canon drivers over the apple drivers, which seem to get priority otherwise.
After doing this, the A3+ paper size appeared in my apps as an option for the Pixma pro 100, and I had the utilities tab appear for this printer in the control panel.
I called Canon tech support to figure this out, they were quite helpful.

HP Officejet Pro 8500 won't print yellow. No error message. Cartridge not out of ink.

Printer won't print yellow. No error messages. Cartidge not out of ink, but did put in a new one and still won't print yellow.

Ok SLU87...here are some steps you can take that should help with your Officejet Pro 8500 A909g not printing yellow:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01980797&tmp_task=solveCategory&cc=us&dlc=en&la...
Let me know if it helps or not.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Officejet Pro 8625 won't print.

Recently purchase Officejet Pro 8625. It won't print from my XP computer, USB interface. I have connected a Vista laptop to it and it prints.
When I send a test page to it, the print dialog box shows the print job status as "spooling", then the job disappears, but it didn't print.
I tried downloading the 8625 basic driver from HP's site. As I walk through the setup, when it asks me to plug in the USB cable, I can't go any further. I don't think that the computer can see the printer. I have another printer, and using the same USB port and cable, I can print without problems.
Thanks for any suggestions!

Hi,
Try following the HP Print and Scan dovtor by selecting Fix Printing and select if that may help resolving the issue:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-135113-1&cc=us&dlc=en&lc=en...
If that does not help resolving the issue, Click on Start > All Programs > HP > HP Officejet Pro 8620 and select Uninstall to remove the software.
Click the Start button and then click on Run.
Type spool into the run dialog and click on OK.
Open the Drivers folder.
Open the w32x86 folder.
Next, open the 3 folder.
Locate the HPBXPSRENDER.DLL file within this folder, right click it and Rename it into HPBXPSRENDER.OLD
Once you are done, download and install the latest software below and check for any difference:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-124140-3&cc=us&dlc=en&lc=en...
Please let me know if that may help,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I purchased a Pixma Pro-100. My prints do not reflect the edited images from CS6/LR5.

I just got a Canon Pixma Pro-100 printer. I'm running CS6 and LR5. My monitors are calibrated, my color space is Adobe RGB (1998). I want the Photoshop /LR to manage my color. I (believe) am using the correct profile for the Canon paper (Pro Luster). However, my prints do not reflect the edited versions I am viewing on my monitors. The colors are darker, dull, a bit on the reddish side, and not as vivid as what I am expecting. Is there anyone out there who can guide me to the proper way to set the up my printer and color space? I this is very confusing to me.

You don't need any additional gadgets to set up your monitor(s) and the printer. Mostly you will just frustrate yourself and waste a lot of ink and paper. Stop wasting your time with them, too.
You do need to get three things set carefully. You need the brightness, the contrast and the grey-scale set right for the printer.
Big point to remember you are dealing with two completely different types of color. One is light and the other is dyes. They will never match exactly except for maybe one or two colors at a time. I generally shoot for flesh tones as that is what people notice mostly.
Always check the details and never let the printer do any color managing. All Canon printers I have worked with have a reddish bias. You can not or at least it is very difficult to get rid of it. Canon engineers seem to prefer a warm tone in their printers.
I curently use three of the Canon Pro printers form the 9000, 9500 II amd the 100. All are great printers. But right now what you are seeing and what you are sending to the printer is different. These need to match or you need to know what to adjust in PS to make them match. Don't use LR to print, it isn't as good as PS and it will be different. If you must, stick to either/or but not both. I prefer PS.
Always shoot RAW and use ACR to convert in either LR or PS but I always print from PS.
Let me know how you get along.
EOS 1Ds Mk III, EOS 1D Mk IV, EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 85mm f1.2 L II USM, EF 70-200mm f2.8 L IS II,
Sigma 120-300mm f2.8 EX APO, Photoshop CS6, ACR 9, Lightroom 6

Pro-100 terrible disk printing color cast

I am getting a terrible yellow/orangecolor cast when printing disks on my Pro100 printer. I'm using the latest Easy Photoprint EX software on Windows 7 64-bit to print on Verbatim AquaAce Glossy disks. These disks printed beautifully on the Epson Artisan 730 printer I used to own. Literally no color issues ever. However on the Pro-100 prints them up borderline unusable.
All other prints from the printer on regular and photo paper turn out perfectly. I've literally never owned a printer with output this good - except for the disks. I'm using the "Printable Disk (recommended)" setting with print quality set to "high".
The Photoprint software has ZERO color controls so I am unable to correct the color cast in software. What's going on here? Do I have any other options to try and fix this?

The fact you paper prints look great. And you tried two different brands of DVD's with the same results tells us something.
The printer and the computer is working OK. There is somethign else that is awry. Some setting is worng. With out knowing your complete process it is not possibile to pin point it here. More info from you as to what you actually do is needed.
Exactly what you do!
Switching disks is not likely to help. You don't need the 'High' quality seting as 'Standard' works well..
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 9, Lightroom 6

Hp officejet pro 8500a won't print or copy without turning off then on again

HP Officejet pro 8500A, Will not print, copy or print received fax. HP icon on the Printer screen just spins, but never prints. The print jobs show in the Que, but never print out. If I shut off the printer and turn it back on it will print, but after a short while it stops again. It has also asked for ink to be replaced.

Hello pcmtgrl
Which model of the Officejet 8500A series do you have? Typically you can find it inside the printer where you change the ink cartridges. Example: A910g, A910a, etc.
Has anything changed recently since the problem started? Is the printer plugged into a wall outlet or a surge protector? Do you have the latest firmware installed? I also suggest running the HP Hardware Diagnostic Utility. Let me know if it finds anything out.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

OfficeJet Pro 8500A won't print test page

This printer suddenly won't print, even a test page. When I try to print from another program I get an error message, document gets stuck in print que. Wireless is recognized. Scan Doctor found printer, still it won't print. Suggestions?

Hi
The problem seems to be with the print spooler service.
since you have already tried the print scan doctor
we can try doing it manually.
Firstly Determine whether the printer is paused or offline
Return to the Devices and printers folder that you opened earlier in this document.
Right-click the name of the product, and then click See what's printing .
Click Printer .
On the print queue menu bar, click Printer , and then look for the Pause Printing and Use Printer Offline items in the menu.
Make sure that there is no checkmark next to either item. If a checkmark displays next to either item, click to clear it.
If these steps resolved the issue , you do not need to continue troubleshooting.
If the issue persists , continue to the next solution
Manually clear the print queue
Return to the Devices and printers folder that you opened earlier in this document.
Right-click the name of the product, and then click See what's printing .
Click Printer , and then click Cancel All Documents .
Click Yes to confirm the action.
If documents remain in the print queue, restart the computer.
Try printing again.
If these steps resolved the issue , you do not need to continue troubleshooting.
If the issue persists , continue to the next solution.
Restart the Print Spooler device
On the Windows taskbar, click the Windows icon ( ), type admin in the Search programs and files box, and then click Administrative Tools .
Double-click Services .
Right-click Print Spooler .
Click Stop to stop the Print Spooler.
Click Start to restart the Print Spooler.
Restart the computer.
Try the print job again
Regards,
Charles Thangaraj
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

HP Officejet Pro L7780 won't print individual pages of a file

I have a HP Officejet Pro L7780 setup with wireless printing on my network and am using Windows 7 on a 64-bit computer with MSWord 2007. I'm trying to duplex print just specific corrected pages (like pages 7-8) from a file (of pages 1-22) and my printer just won't do it. When I select to print specific pages, the printer just sits there and then the print queue is apparently dumped, as the tray icon just disappears. The printer will print only all pages of a file or nothing at all. What could be the reason for this and how do I correct it? Thanks, Patricia

Hello tdhoobyar,
Please click here to access the troubleshooting steps that should resolve the issue.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Hp Color Laserjet pro M177fw won't print double sided anymore

Hello. I have a Hp Color Laserjet pro M177fw until about three weeks ago it would print double sided no problems. I have used this printer on my pc and now my mac with no problems previously. I am running a Macbook Pro (less then six months old) which is running 10.10.1 (Yosemite). I attend college and I know at the end of last quarter during finals week (Dec. 15th) I still had the ability to do 2 sided printing. Sometime between then and the new quarter starting last monday I lost the ability to do 2 sided printing. After scouring the internet I have tried everything they suggest:
Uninstalling printer and reinstalling
resetting the printer setting on the mac and then reinstalling printer
resetting the printer settings on mac, rebooting and then reinstalling printer
installing older drivers( hp automatically installs newest drivers even if you use an older driver file)
resetting physical printer to factory default and reconnecting to wireless network.
repairing the disk permissions
The only new software I have installed on the computer in the last three weeks is Adobe Creative Cloud and the printing problem preexisted that installation.

Hi @Arboria9 ,
I see that you are experiencing issues printing two-sided from Yosemite. I would like to help you resolve this issue.
You have pretty much have done all the steps that I would have provided.
Are you still able to print two-sided from the Windows computer?
Are you missing the option to select two-sided printing in the print driver?
Check the driver name that is installed for the printer. Make sure it shows just the printer's name.
Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen it should show the printer's name. (Officejet 6500)
If the full printer name isn't listed correctly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
How was the printer name listed?
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Officejet Pro 251dw won't print with applications inside Parallels 9

I've used HP printers with my Mac computers for years and had no problems, even when I was working with Windows XP and Windows-based applications inside Parallels Desktop on the Mac. All I would have to do to have the Windows-based software capture the printer (connected with a USB cord) was to click on a drop-down menu item under "USB." Recently I upgraded our OS to Mavericks and had to upgrade Parallels from Version 6 to Version 9. A week ago we had to replace our old HP Deskjet 6500 printer, and we chose the Officejet Pro 251dw. We connected the new printer wirelessly to our home network, and we were able to print from both our desktop iMac and our MacBook Pro with no difficulties. But when I needed to print something from PrintMaster 12, a Windows-based desktop publishing program running on Windows XP inside Parallels Desktop 9, the job wouldn't print, and I got a message that the printer wasn't connected. After doing my own troubleshooting, I spent several hours on the phone with Parallels tech support, including having them connect to my computer over LogMeIn and change all sorts of settings, but the best I could get was that the printer queue report said that the job was printing, but the touch screen on the printer flashed rapidly back and forth from "printing" to the date and time, with a large red X next to the date-time read-out, and still no job printed. After having two or three first-level techs and then a second-level engineer working on the setup, the Parallels people finally gave up and said that the problem must be in the settings inside the printer and that we'd have to have someone who works with printers.adjust them. Has anyone out there had this sort of problem working with Parallels Desktop 9 and the Mavericks OS? It wasn't just the desktop publishing software; the same thing happened when the engineer went into the Windows XP printer settings and tried to print a test page.

Rocky8,
This is a little outside our area of printing, but I'll try and help you the best I can. My question for you is the printer showing up under the USB menu in Parallels. If it's not showing up then you need to determine why the USB connection isn't showing up in your Parallels USB menu. This could be a couple of issues, but the one that I think might be happening is the version of the USB port your using. Can you verify that you're not connecting the printer via a USB 3.0 port. Try plugging into one of your other USB ports to see if the printer will show up in the parallels USB menu.
BT
Working for HP and here to help!

HP laserjet Pro M201dw won't print emails... Help Shlomil

Hoping Shlomil will help me again... same printer and setup .. with Mac Air 10.10 .. wont print emails but does other printing.. on print screen won't show document - so prints blank page .. for other printers selected it shows documents and prints.
Also.. finding that it seems to go back to single sided and uncheck the duplex. I have to check each time to make sure all setting as okay for it to work on documents. Of course.. this does not apply to email issue noted above. Email using Mac Mail.
Help, once again...
Fran
This question was solved.
View Solution.

Thanks for letting me know @pathfinder2020 .
Here is a document for ePrint information. Getting Started with ePrint.
Select Are there any limitations when using ePrint? ePrint does not support duplexing (printing on both sides of the page).
If they are using a Eprint App, it may print two-sided if the printer supports it.
This document provides information on how to Use ePrint & mobile devices.
Hope this helps.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Pro 100 Won't Print Borderless

Similar Messages

Maybe you are looking for