Problem executing BC4J Virtual Mall

Hello.
I executed bc4jvsm without problems on my JDeveloper 9.0.3 internal oc4j. I am now trying to deploy and use on my Oracle 9ias 9.0.2.3, and getting the following error:
"Error in Virtual Shopping Mall Application Insufficient parameters for this request.
Please check the URL.The request may need form data which is missing.
Click here to login again or to go to your home page if you have logged in already. "
I checked all the xml files, they seem ok. The relevant libs are there.
Has anyone seen this error before?
Regards,
Pedro

Well I got past this problem. I found some discussion of this issue on google groups which led me to a somewhat obscure reference in the documentation for dealing with third party databases. I had to to open the configurations screen for my application module and go into it's property editor and set the jbo.sql92.jdbcDriver property properly identify the type of jdbc-odbc bridge driver.

Similar Messages

NFirefox will not allow me to click on a link without switching to another program first. The version is 3.6.8. This problem makes Firefox virtually unusable. Help!

Firefox will not allow me to click on more than one link in a sequence. After one click, I am forced to switch to another active application before returning to Firefox and clicking on another link. I have seen this problem posted by others, but I can't find an answer by Mozilla. Since this problem makes Firefox virtually unusable (version 3.6.8) I would hope that Mozilla would offer an answer ASAP. Until then, I'm stuck with Explorer.
== This happened ==
Every time Firefox opened

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Problem executing function

Hi All,
I have a problem executing a function in oracle 10g.
I am getting an error while executing ....
Here is a function along with the error i am getting:
create or replace FUNCTION UnpackArray
Source IN VARCHAR2 DEFAULT NULL,
Delimiter IN CHAR DEFAULT ','
RETURN reSourceArray0 PIPELINED
IS
SourceArray00 SourceArray0:=SourceArray0(NULL);
TYPE REFCURSOR IS REF CURSOR;
CURSOR0 REFCURSOR;
DelLen int;
Pos int;
Cnt int;
str int;
LEN int;
Holder VARCHAR2(220);
BEGIN
--Check for NULL
IF Source is null or Delimiter is null THEN
Return;
END IF;
--Check for at leat one entry
IF RTRIM(LTRIM(Source)) = '' THEN
Return;
END IF;
/*Get the length of the delimeter*/
SELECT LENGTH(RTRIM(Delimiter)) INTO DelLen FROM DUAL;
SELECT INSTR(UPPER(Source), UPPER(Delimiter)) INTO Pos FROM DUAL;
--Only one entry was found
IF Pos = 0 THEN
BEGIN
INSERT INTO UnpackArray_TBL
( Data )
VALUES ( Source );
return;
OPEN CURSOR0 FOR SELECT * FROM UnpackArray_TBL;
END;
END IF;
/*More than one entry was found - loop to get all of them*/
SELECT 1 INTO str FROM DUAL;
<< LABEL4 >>
WHILE Pos > 0
LOOP
BEGIN
/*Set current entry*/
SELECT Pos - str INTO len FROM DUAL;
SELECT SUBSTR(Source, str, len) INTO Holder FROM DUAL;
/* Update array and counter*/
/* Update array and counter*/
INSERT INTO UnpackArray_TBL
VALUES ( Holder );
/*Set the new strting position*/
SELECT Pos + DelLen INTO str FROM DUAL;
SELECT INSTR(UPPER(Source), UPPER(Delimiter), str) INTO Pos FROM DUAL;
OPEN CURSOR0 FOR SELECT * FROM UnpackArray_TBL;
END;
END LOOP;
/*Set last entry*/
SELECT SUBSTR(Source, str, length(RTRIM(Source))) INTO Holder FROM DUAL;
-- Update array and counter if necessary
IF length(RTRIM(Holder)) > 0 THEN
INSERT INTO UnpackArray_TBL
VALUES ( Holder );
OPEN CURSOR0 FOR SELECT * FROM UnpackArray_TBL;
END IF;
--Return the number of entries found
Return; LOOP
FETCH CURSOR0 INTO
SourceArray00.Data;
EXIT WHEN CURSOR0%NOTFOUND;
PIPE ROW(SourceArray00);
END LOOP;
CLOSE CURSOR0;
RETURN;
END;
Error is : Compilation failed,line 6 (12:13:25)
PLS-00201: identifier 'RESOURCEARRAY0' must be declared
Compilation failed,line 0 (12:13:25)
PL/SQL: Compilation unit analysis terminated
Regards,
Smiley

Hi,
I have a problem executing this function. Pls help me solve this issue.
---------------------------------Function---------------------------------
BEGIN
EXECUTE IMMEDIATE 'DROP TYPE reSourceArray0';
EXECUTE IMMEDIATE 'DROP TYPE SourceArray0';
EXCEPTION WHEN OTHERS THEN NULL;
END;
CREATE OR REPLACE TYPE SourceArray0 AS OBJECT(Data VARCHAR2(255));
CREATE OR REPLACE TYPE reSourceArray0 AS TABLE OF SourceArray0;
BEGIN
EXECUTE IMMEDIATE 'DROP TABLE UnpackArray_TBL CASCADE CONSTRAINTS';
EXCEPTION WHEN OTHERS THEN NULL;
END;
CREATE GLOBAL TEMPORARY TABLE UnpackArray_TBL(Data VARCHAR2(255)) ON COMMIT PRESERVE ROWS
CREATE OR REPLACE FUNCTION UnpackArray
Source IN VARCHAR2 DEFAULT NULL,
Delimiter IN CHAR DEFAULT ','
RETURN reSourceArray0 PIPELINED
IS
SourceArray00 SourceArray0:=SourceArray0(NULL);
TYPE REFCURSOR IS REF CURSOR;
CURSOR0 REFCURSOR;
DelLen int;
Pos int;
COUNT_ADV int;
START_ADV int;
LENGTH_ADV int;
Holder VARCHAR2(255);
BEGIN
--Check for NULL
IF Source is null or Delimiter is null THEN
Return;
END IF;
--Check for at leat one entry
IF RTRIM(LTRIM(Source)) = '' THEN
Return;
END IF;
/*Get the length of the delimeter*/
SELECT LENGTH(RTRIM(Delimiter)) INTO DelLen FROM DUAL;
SELECT INSTR(UPPER(Source), UPPER(Delimiter)) INTO Pos FROM DUAL;
--Only one entry was found
IF Pos = 0 THEN
BEGIN
INSERT INTO UnpackArray_TBL
( Data )
VALUES ( Source );
return;
OPEN CURSOR0 FOR SELECT * FROM UnpackArray_TBL;
END;
END IF;
/*More than one entry was found - loop to get all of them*/
SELECT 1 INTO START_ADV FROM DUAL;
<< LABEL4 >>
WHILE Pos > 0
LOOP
BEGIN
/*Set current entry*/
SELECT Pos - START_ADV INTO LENGTH_ADV FROM DUAL;
SELECT SUBSTR(Source, start_, length) INTO Holder FROM DUAL;
/* Update array and counter*/
/* Update array and counter*/
INSERT INTO UnpackArray_TBL
VALUES ( Holder );
/*Set the new starting position*/
SELECT Pos + DelLen INTO START_ADV FROM DUAL;
SELECT INSTR(UPPER(Source), UPPER(Delimiter), START_ADV) INTO Pos FROM DUAL;
OPEN CURSOR0 FOR SELECT * FROM UnpackArray_TBL;
END;
END LOOP;
/*Set last entry*/
SELECT SUBSTR(Source, start_, LENGTH(RTRIM(Source))) INTO Holder FROM DUAL;
-- Update array and counter if necessary
IF LENGTH(RTRIM(Holder)) > 0 THEN
INSERT INTO UnpackArray_TBL
VALUES ( Holder );
OPEN CURSOR0 FOR SELECT * FROM UnpackArray_TBL;
END IF;
--Return the number of entries found
Return; LOOP
FETCH CURSOR0 INTO
SourceArray00.Data;
EXIT WHEN CURSOR0%NOTFOUND;
PIPE ROW(SourceArray00);
END LOOP;
CLOSE CURSOR0;
RETURN;
END;
--------------------------------Error i am getting--------------------------
"Parameter 'RETURN_VALUE': No size set for variable length data type: String."
Thanks and Regards,
Smiley

Problem with the virtual machine

Hello.
i've encountered problem with the virtual machine. Java instance is reseting sometimes. I found message in dev_server0 there is:
<b>
[Thr 6] JLaunchIExitJava: exit hook is called (rc = 666)
[Thr 6] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
</b>
in dev_jcontorol:
<b>
[Thr 1] Thu Mar 13 15:58:39 2008
[Thr 1] JStartupICreateProcess: fork process (pid 16077)
[Thr 1] JControlICheckProcessList: process server0 started (PID:16077)
</b>
where i can looking the reason of this?
regards,
Denis

Hi Denis,
This looks like a memory issue, similar problems have been posted on this forum before.
Change the following params.
-XX:PermSize=2048m
-XX:MaxPermSize=2048m
Also,
See SAP note 709140 and the referenced notes.
Regards,
Siddhesh

Problem executing a sql query in 10g environment

Hi,
I am having problem executing the following sql query in 10g environment. It works fine in 8i environment.
I tried to_number(to_char) and it did not work.
**A.APPL_ACTION_DT >= TO_CHAR("&v_strBeginStatusDate&", 'DD-MON-YYYY') AND A.APPL_ACTION_DT <= TO_CHAR("&v_strEndStatusDate&", 'DD-MON-YYYY')))**
Any suggestions..
--Pavan

I would be surprised if that worked in 8i as posted, although I no longer have 8i to test. You do not tell us the error message you are getting, but there are several things wrong with what you posted.
First, the substitution variable requires only the & at the beginning, you have one on each end of your string, the one at the end will remain in the string that is passed to the database.
Second, you cannot TO_CHAR a string with a date format as you are trying to do. The TO_CHAR function is overloaded and has two basic forms TO_CHAR(date, format_model) and TO_CHAR(number, format_model). Note that neither takes a string. It would appear that at least current versions of Oracle choose the second signature unless specifically passed a date datatype.
SQL> select to_char('&h', 'dd-mon-yyyy') from dual;
Enter value for h: 12
old   1: select to_char('&h', 'dd-mon-yyyy') from dual
new   1: select to_char('12', 'dd-mon-yyyy') from dual
select to_char('12', 'dd-mon-yyyy') from dual
ERROR at line 1:
ORA-01481: invalid number format modelalthough I suspect that the error you are getting with your posted code is more likely to be ORA-01722: invalid number.
Depending on the data type of appl_action_date, you are probably lokoing for TO_DATE instead of TO_CHAR.
John

Urgent!!! problems deploying BC4J to Oracle 8i

I have the following problem deploying BC4J to Oracle 8i as EJB :
When I tried to deploy as an EJB following the guidelines in the following help page:
Contents help--> Developing Business Components-->Deploying Business Components-->Creating Deployment Profiles and Deploying
I get the following error :
An exception occurred during code generation: Class not found: bc4jEjbtrial.common.ejb.DeptAppModHome.class
*** Errors occurred while deploying the EJB to JServer ***
Could someone please tell me where I am possibly going wrong?

What version of jdev are you running? The Bc4jtrial package sounds suspicious.
Thanks
Blaise

Oracle 11gR2 to SQL Server 2008 R2 - Problem executing SP on SQL server

Hi,
I have this problem: Executing a sp in SQL server from oracle
--------------------ORACLE SP--------------------
create or replace
PROCEDURE DRIVER_SP
AP IN OUT appl_param%ROWTYPE
as
v_sp_name varchar2(50);
v_control_id number;
val VARCHAR2(100);
cur INTEGER;
nr INTEGER;
BEGIN
v_sp_name := ap.MESSAGE_MISC_TEXT;
v_control_id := ap.control_id;
cur := DBMS_HS_PASSTHROUGH.OPEN_CURSOR@dblink_sqlserver;
DBMS_HS_PASSTHROUGH.PARSE@dblink_sqlserver(cur, 'execute ' || v_sp_name || ' ' || to_char(v_control_id));
LOOP
nr := DBMS_HS_PASSTHROUGH.FETCH_ROW@dblink_sqlserver(cur);
EXIT WHEN nr = 0;
DBMS_HS_PASSTHROUGH.GET_VALUE@dblink_sqlserver(cur, 1, val);
END LOOP;
DBMS_HS_PASSTHROUGH.CLOSE_CURSOR@dblink_sqlserver(cur);
driver_ap01_log_msg('Procedure returned: ' || val);
commit;
exception
when others then
driver_ap01_log_msg(sqlerrm);
END DRIVER_SP;
--------------------SQL Server SP-----------------------
ALTER PROCEDURE [dbo].[PA01_SP]
@control_id integer
AS
begin
--update PA01
--set infile_control_id = @control_id
--insert into dbo.PA01LOG(msg) values('test')
select 0
end
THE PROBLEM: Oracle SP calls SQL Server SP and any time I try to INSERT/UPDATE/DELETE (DML) within SQLServer SP it throws an exception on Oracle's end. Once I comment all DML code the proc runs fine.
+"ORA-28511: lost RPC connection to heterogeneous remote agent using SID=ORA-28511: lost RPC connection to heterogeneous remote agent using SID=(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xxxxxxx)(PORT=1511))(CONNECT_DATA=(SID=dg4msql)))+
+ORA-02063: preceding line from DBLINK_SQLSERVER"+
Please help.
Thanks

Thanks for your response, it got me closer to my goal. I'm still facing one problem:
Let me explain what I need to achieve
Purpose
Execute an Oracle stored procedure which in turn executes a stored procedure on remote SQLServer which updates local tables on that SQLServer.
Observations
The execution of both procedures completes successfully. However, an explicit COMMIT statement must be issued on the Oracle session which initiated the transaction before any data could be read from the SQLServer updated table.
The following is test exercise for proof of concept.
PL/SQL code
declare
out_arg integer;
ret_val integer;
begin
out_arg := 0;
ret_val := "dbo"."ZZZ_SP"@DBLINK_SQLSERVER(10, out_arg);
dbms_output.put_line(to_char(out_arg));
end;
SQLServer code
ALTER procedure [dbo].[ZZZ_SP] (@arg1 integer, @arg2 integer output)
AS
begin tran tran1
insert into dbo.PA01LOG(msg) values('ddd')
commit tran tran1
set @arg2 = @arg1 * 100
select -1
GO
I have put the Oracle gateway in Single_Site mode to avoid two phase commit. I want SQLServer to be able to run its own transaction management. I don't want Oracle to be responsible for completing the transactions which take place within SQLServer.
I fear there might be a gap in my knowledge.
Any ideas why I need to issue a COMMIT in Oracle session to release the lock from SQLServer table?
Thanks

Problem with creating virtual column

Hello,
We've got problem with creating virtual column.
There is table R_T that contain columns R_ID and L_ID, we would like to create virtual column RL_ID that contains sth like 'R_ID-L_ID' (R_ID, L_ID and RL_ID are varchars).
According documentation we've tried:
alter table R_T add column (RL_ID varchar2(60) generated always as (R_ID||'-'||L_ID) VIRTUAL)
but getting
ORA-00904: : invalid identifier
00904.00000 - "%s: invalid identifier"
Have no idea where is the problem.
Table, columns names are little different but contains only capital letters A - Z and underscore "_".
Has anyone idea?
Thanks a lot.

Strange...
This does work for me :
Connected to Oracle Database 11g Enterprise Edition Release 11.2.0.1.0
Connected as dev
SQL>
SQL> create table r_t (
2   r_id varchar2(25),
3   l_id varchar2(25)
4 );
Table created
SQL> insert into r_t (r_id, l_id) values('R','L');
1 row inserted
SQL> alter table r_t add (rl_id varchar2(60) generated always as (r_id||'-'||l_id) virtual);
Table altered
SQL> select * from r_t;
R_ID                      L_ID                      RL_ID
R                         L                         R-L
SQL>

Problem executing .bat file from within Java class

I'm stumped: I have no problem executing a .bat file that sets classpaths and executes a Java jar, but when I try to execute other executables first and then the .jar, my application hangs and since the DOS box doesn't come up over my GUI, I can't see what's going on.
This works:
public void execute() throws Exception {
String s = "c:\\cs47auxs\\omnijar\\omni.bat";
Process p = Runtime.getRuntime().exec("\"" + s + "\"");
p.waitFor();
JOptionPane.showMessageDialog(frame,
"The Database Has Been Successfully Reloaded.",
"Information Message",
JOptionPane.INFORMATION_MESSAGE);
Here's the .bat 'omni.bat'
set JAVA_HOME=c:\j2sdk1.4.2_04\bin
%JAVA_HOME%\java -jar C:\CS47AUXS\OMNILOADJAR\OmniLoad.jar
This doesn't work:
public void execute() throws Exception {
String s = "c:\\cs47auxs\\omnijar\\jobomni.bat";
Process p = Runtime.getRuntime().exec("\"" + s + "\"");
p.waitFor();
JOptionPane.showMessageDialog(frame,
"The Database Has Been Successfully Reloaded.",
"Information Message",
JOptionPane.INFORMATION_MESSAGE);
Here's the .bat file 'jobomni.bat'
SET NETX_HOME=C:\CS47AUXS
SET COBOL_HOME=C:\CS47AUXS\OFFLINE
CD %NETX_HOME%
CALL SET-NETX.CMD
CD %COBOL_HOME%
SSBPPC10 JOBOMNI X
SET JH=C:\J2SDK1.4.2_04\BIN
SET OMNI_HOME=C:\CS47AUXS\OMNILOADJAR
CD %OMNI_HOME%
%JH%\java -jar omniload.jar
Can anyone shed some light here? Even when I execute the application from the command line the new DOS box doesn't become visible nor can I see any errors. If I could just get that visibility, I could probably figure out what is going wrong.

Same problem with me as well.... Badly looking for a solution...
I predict the following:
- If your batch file has pretty less number of dos/shell commands then it gets executed fine with exec() and proc.waitFor();
- If you increase the number of dos/shell commands in the bat file then try executing it then it definately hangs at proc.waitFor();
Even "cmd.exe /C C:\\test.bat" hangs... if the commands are more...
Is this some sort of bug? or am i doing anything wrong? I tried searching for solution on the net and search forums... but couldnt find a solution for the same.. not sure where i missed, what i missed...
Incase some one finds a solution.. do post it here...
Message was edited by:
amadas

Problem with BC4J in 10g: incorrect Date formatting

I have PL/SQL procedure, which is called from bc4j-struts-application like this:
CallableStatement cs = getDBTransaction().createCallableStatement(FIND_USER_RESP_STMT,0);
cs.execute();
It return an exeption with this message:
ORA-01403: no data found
ORA-06512: at "CRN.CRN_UTIL", line 115
ORA-06512: at "CRN.CRN_UTIL", line 323
ORA-06512: at "CRN.CRN_RESPONSIBILITY", line 85
ORA-01843: not a valid month
ORA-06512: at line 1
I don't send any data parameter for this procedure. When I try to call it from JDeveloper connections debug, it runs succesfully. I try to create bc4j entity to query:
select to_char(sysdate, 'DD-MON-YYYY') X,
to_char(sysdate, 'DD-MM-YYYY') Y from dual
and it retrieves:
27-Â¿Â¿Â¿-2004
27-09-2004
Date constant is used in PL/SQL procedure with format 'DD-MON_YYYY', but I can't change it, because it used by many other applications.
My local setting is english, USA, and I have the second language on my PC - russian.
JDeveloper 9.0.5.2. This code runs succesfully in JDeveloper 9.0.3.3.
How can I send bc4j date setting in normal format to solve this problem? And where can I find bc4j local settings, which are sended by bc4j to server?
Regards, Nikolay

Hello,
The problem is still available. Could anybody help?
Regard

Problem register Oracle Virtual Directory to WebLogic - urgent ... pls help

Hi,
I'm a new to Oracle product and would like to install and run Oracle Virtual Directory for the following purpose:
Using LDAP client that connects to OVD and to issue ldapsearch command line based on the attrbiutes and filters of each one of the two Directories behind the OVD..
|-- Tivoli LDAP directory
LDAP client -> OVD ---|
|-- MS AD
I have downloaded the identity management package 11g and install only the OVD on Windows 2003 standard machine.
I then realized that I have to install the WebLogic package to have WEB UI to the OVD admin.
So I downloaded the WebLogic 10.3.1.0 package and install it.
I followed the installation instructions of
'Installing and Configuring Only Oracle Virtual Directory Without a WebLogic Administration Domain' at http://download.oracle.com/docs/cd/E12839_01/install.1111/e12002/ovd.htm#CIHFFAFH
and complete the installation.
Notice that the OVD and the WeblOgic SW are installed on the same Windows machine.
After that I had to register Oracle Virtual Directory with the WebLogic Administration Server.
Running the command-line I got the following error:
Deploying NonJ2EEManagement Application...Done
Command failed: Exception while registering the instance
Details are logged in C:\....\provision.log
opmnctl registerintance: failed
The provision.log file has the following exception call stack:
Aug 18, 2009 4:08:05 PM oracle.as.config.provisioner.InstallerCmdLine logInitialCommand
INFO: Start of command: [registerinstance, -adminHost, 127.0.0.1, -adminPort, 7001, -adminUsername, weblogic, -oracleHome, C:\oracle\product\11.1.1\OracleIDM_1, -oracleInstance, C:\as_admin\asinst_1]
Aug 18, 2009 4:08:14 PM oracle.as.config.provisioner.InstallerCmdLine handleRunFailure
SEVERE: Command failed:
oracle.as.config.ProvisionException: Exception while registering the instance
     at oracle.as.config.impl.OracleASInstanceImpl.register(OracleASInstanceImpl.java:239)
     at oracle.as.config.provisioner.commands.RegisterInstanceCommand.execute(RegisterInstanceCommand.java:11)
     at oracle.as.config.provisioner.InstallerCmdLine.run(InstallerCmdLine.java:86)
     at oracle.as.config.provisioner.InstallerCmdLine.main(InstallerCmdLine.java:44)
Caused by: oracle.as.config.ProvisionException: Unable to validate NonJ2EEManagement Application deployment on admin server.
     at oracle.as.config.impl.RuntimeServiceConnection.validateNonj2eeApplication(RuntimeServiceConnection.java:595)
     at oracle.as.config.impl.OracleASInstanceImpl.register(OracleASInstanceImpl.java:219)
     ... 3 more
Caused by: oracle.as.config.ProvisionException: The AdminServer is not enabled for NonJ2ee applications.
     at oracle.as.config.impl.RuntimeServiceConnection.isValidJrfInstall(RuntimeServiceConnection.java:547)
     at oracle.as.config.impl.RuntimeServiceConnection.deployNonj2eeApplication(RuntimeServiceConnection.java:201)
     at oracle.as.config.impl.RuntimeServiceConnection.validateNonj2eeApplication(RuntimeServiceConnection.java:587)
     ... 4 more
Any thoughts ?

Hi,
I am also facing the same problem. I have oracle internet directory 11.1.1 installed without domain. I then installed weblogic 32bit exe on same windows server.
while registering getting the same error. I think it is because of bit compatibility. OID is 64bit and weblogic is 32bit. Not sure.
thanks

JboException:JBO-33001 Problem with bc4j.xcfg file

I am developing a JSP application that will be used to evaluate
the JDeveloper 3.2 software for users to edit data in an Oracle
8i database. The database is running on a Sun machine using
solaris 2.8. The web server is Apache 1.13 and the servlet
engine is Tomcat 3.2.
I have read the other postings regarding this problem (Error:
oracle.jbo.JboException: JBO-33001: Cannot find the
configuration file /DataDummy/common/bc4j.xcfg in the classpath)
and their does not appear to be a good description on how
to correct this error.
I have the path and file listed in my tomcat.sh file:
(bc4j.xcfg at end of list)
CLASSPATH=${CLASSPATH}:/project2/tomcat/lib/jdev3_2/xmlparserv2.j
ar:/project2/tomcat/lib/jdev3_2/jdev-
rt.zip:/project2/tomcat/lib/jdev3_2/jbojdbcpatch.zip
:/project2/tomcat/lib/jdev3_2/connectionmanager.zip:/project2/tom
cat/lib/jdev3_2/jbohtml.zip:/project2/tomcat/lib/jdev3_2/jboimdom
ains.zip:/project2/tomcat/
lib/jdev3_2/ordim817.zip:/project2/tomcat/lib/jdev3_2/ordvir817.z
ip:/project2/tomcat/lib/jdev3_2/ordhttp.zip:/project2/tomcat/lib/
jdev3_2/jbomt.zip:/project
2/tomcat/lib/jdev3_2/jbodomorcl.zip:/project2/tomcat/lib/jdev3_2/
jboremote.zip:/project2/tomcat/lib/jdev3_2/jndi.jar:/project2/tom
cat/lib/jdev3_2/jbodatum12
.zip:/project2/tomcat/lib/jdev3_2/classes12.zip:/project2/tomcat/
lib/jdev3_2/DataJSP_DataDummy_DataDummy_Module.properties:/projec
t2/tomcat/lib/jdev3_2/bc4j
.xcfg
Should the bc4j.xcfg be liste in the classpath of a different
file than tomcat.sh?
Is my above syntax incorrect for tomcat?
Thank you for your assistance!

Hello!
I got the same problem with Tomcat 3.2. Now I tried Tomcat 4.0.1
and it works.
Bye,
Andreas

Problem executing programs after instaling Studio 8.1

I had JDK 1.5 installed on my computer. I earlier used to code my programs either in a text-editor or JCreator & run them from the command prompt.
I recently installed Studio Enterprise 8.1. My programs execute successfully from the IDE. They also complie successfully from the command prompt. But whenever I try to run them now from command prompt or JCreator, I always get a
Exception in thread "main" java.lang.NoClassDefFoundError: <class name>
exception. Even when I am not using packages & the programs being run reside in the current directory only, where java.exe resides.
Can somebody help me????

The last few lines of the output are as follows:
[Loaded java.util.zip.ZipFile$2 from shared objects file]
[Loaded java.util.zip.Inflater from shared objects file]
[Loaded java.lang.Math from shared objects file]
[Loaded java.security.PrivilegedActionException from shared objects file]
Exception in thread "main" java.lang.NoClassDefFoundError: sample
[Loaded java.lang.Shutdown from shared objects file]
[Loaded java.lang.Shutdown$Lock from shared objects file]
There was a whole series of Loaded module above these, from which I could not figure out any problem.

Unique Problem executing a Non Interactive Adobe Invoice form

I am approaching the forums after going through a tremendous check on both the ABAP Program and the Adobe form .
We were almost on completion of invoice , everything was working from the header and the main body and we tested it.
We have been developing the invoice for 35 bus days and we finally reached to Terms page when the adobe form does not show in print preview.
We removed all the elements in the form which we changed lately and brought it back to the same stage where it was running smoothly, still the same issue , when we run the abap program it says form is executed but does not result in a pdf , our small test programs and default pdf test programs are all showing up in preview.
ADS is working ,test programs are working fine its the custom program that is not generating a pdf .
Did u have seen situations like these , any good suggestions to resolve this problem.

If the test programs are working fine then I think the problem will be with the custom program.
Please check the program and let me know.
Thanks,
Chandra Indukuri

Problem with a virtual KYF

We have a virtual key figure, a employee counter.
It works fine when we run the query, but it gives a cero when we refresh it.
Any help will be helpful
Thanks a lot
Ignacio

Ignacio,
I think you have to explain with more details your problem...
Bye,
Roberto

Problem executing BC4J Virtual Mall

Similar Messages

Maybe you are looking for