Problem In Repairing Aino

Hello,
I have problem in repairing my Aino, it already have the latest software, but suddenly the touchsreen is stop working! so I decided to repair it using Sony PC Companion.
But there is an error said "installation error, unable to install or start phone software update components".
I also already tried using the Update Service, but it won't work either. It can't passed the "connect" step, eventhough my phone is already connected to my laptop.
So what should I do now?
Thank You.

try SUS
Update Service (SUS)
http://www.sonymobile.com/gb/tools/update-service/
http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
Don't forget to mark the Correct Answers & Helpful Answers
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

Substitution - Problems reported (repairable) - Message

I can substitution rule without any error message. But when I revisit the substitution area, I can see the message "Problems reported (repairable)" under 'rule activation' tab.
The message changes to 'Successful' when I click 'Retry'

Hi all,
I got a similar error:
- Whenever I create a substitution rule, activate it and press then "Refresh", I get two substition rules (for two different users).
This is highly strange. Does anyone have any hints how to avoid to get these two rules?
Best Regards
Philipp Kölsch

UWL Substitution rules : Problems reported (repairable)

Hello,
I have a poblem with the substitution rules within the EP7.0 (our backend system is ECC6.0).
I have created a substitution rule and have set it active.
When I have a look later on to the management of substitution rules, i always get an error message: "Problems reported (repairable)" --> "Substitution rule is not defined in the system" (System: SAP_ECC_UWL --> this is our system alias for uwl in the EP). When I push "retry" the substitution rule is succesfully registered again.
But the next time when I have a look onto it, i get the same error message.
I checked out the substitution rule, it worked (that means the substitute see the work items in his uwl), but why there is this strange error message ???
Thanks for your help.
Regards,
Stefan

Hi all,
I got a similar error:
- Whenever I create a substitution rule, activate it and press then "Refresh", I get two substition rules (for two different users).
This is highly strange. Does anyone have any hints how to avoid to get these two rules?
Best Regards
Philipp Kölsch

SPF is not supported SCVMM cluster problems, when repairing ?

SPF is not supported SCVMM cluster problems, when repairing ?

See:
*http://forums.sdn.sap.com/thread.jspa?threadID=2056183&tstart=45#10718101

Problem with repaired neo fis2r

I am experiencing performance problems with my neo tha t I am not sure where to begin trouble shooting. I had an video card falure(delaminated pin on agp ) which resulted in damage to the agp slot I rma 'd my neo and it returned marked repaired with a grey agp slot , bios 1.4 ( had 1.6 installed) and the same serial #. I reinstalled all components. noted the retrograde bios and flashed to 1.8. then I attempted to return all settings to theyre original state only to find that I can't overclock! previously I got 250mhz clock with perf mode set to ultra turbo and ram set to 333mhz . now I can't get past perf mode fast and 205mhz no matter what. I see references to bios 1.8 as being not very overclockable.this may be the problem but the waters have been muddied by the multitude of events. I am not an expert and do not know where to start. I was so thrilled with the performance of my neo and now I am at a loss . Is the bios responsible for this abysmal performance or is my system still compromised? I don't know what to do to determine its state. my system is as follows:-
neo fis2r( of course)
2.4c p4 with zalman alcu 7000
ati 8500dv
512mb samsung 400mhz ram
seagate barracuda sata 150 raid 0
pci modem card
thermaltake xaser2 case
any suggestions would be greatly appreciated
kev

essentially I am not just concerned about it's current inability to overclock. but more in the fact that b4 the repiar of the board I was able to overclock with no difficulty and no special considerations. in fact when I look at my little log of bios settings the agp clock was set at 66.6/33.3 after all the overclocking. and now with EXACTLY the same components( ati card repalced but physically identical) none of those same settings work. did the failure damage other components whose failure is not yet critical path or has the bios upgrade caused instability?

Acrobat and Reader XI freeze 3 secs after opening (force close needed). Win 8.1. Restart usually removes problem, sometimes repair.

Please help.
Running Adobe Acrobat and reader XI ( latest versions). PC is Lenovo ThinkPad 440 S. Don't think I've got any plug-ins that are affecting this, but Dragon NaturallySpeaking is installed on PC, and I know this sometimes causes problems with some programs.
I can uninstall and reinstall either of the programs, and sometimes after a day or a week the problem returns. Restarting the computer will usually cause it to disappear for awhile and then it returns. The freeze is always the same, about three seconds after opening a document, it freezes and I have to close the program and restart the computer if I want the program to work again. I've tried switching off the security settings as suggested a number of websites, and this sometimes seems to help, but the problem nevertheless returns. I've got Acrobat on trial, and would like to buy, but I'm not going to do so and as this problem can be solved.
I've tried installing the programs multiple times, both clean install and repair and this doesn't stop the problem from happening, and it's happened over the two latest updates to the programme with no success. Out of interest, I've also noticed it doesn't always save my preferences between opening the program (e.g. page view preferences).
Many thanks for any input,
Jason Anderson

Hi Jason,
I would recommend you to do a selected startup and then enable the programs one by one to isolate which program might be causing this.
Please refer the KB: Restart Windows in a modified mode | Windows 7, Vista for selective startup of Windows.
Regards,
Anoop

Problem with repairing Lion

A week ago my MacBook Pro was running slow, so I turned it off. When I tried to turn it back on it wouldn't. I took my mac to the local Geek Squad and he told me to boot it up holding option (same as holding command+R). When I do this I click on Repair Lion or something like that, I get to the step where I need to select a drive, and Macintosh HD and Revover HD are both locked. Anything I can do? I do not have a back up disk, and I never backed it up with Time Machine. I don't want to lose all of my files.
Thanks.

It is weird that the disks are locked, I dont know how to fix that. If you decide to get a new hard drive, I recommend looking in to OCZ Solid State Drives (SSD). OCZ is a very very reputable company, long warranties, and they are less expensive now then when I bought mine. Opposed to a traditional spinning disk, they are more like ram. The read and write speeds of a SSD is about 3 to four times faster than a brand new disk hard drive. I love mine, it makes my computer fast. Apps and documents open seconds after you click them, my boot up time is about 25 Seconds, and local data transfer is fast. When I installed Mountain lion, it estimated 35 minutes and it is usually longer but it took 10 mins with the SSD. Whoever you have replace the drive usually have drive docking bays to transfer you data, or you can have them put the old drive in an external exlosure. If you do it yourself, you could buy an external enclosure and if you are computer savy, navigate the files of the drive and find your things, if geek squad cant get the data off the old drive it would likely be your dive took a crap and that was your original problem.
Good Luck.
 MacBook Pro 13" 2.3 GHz dual i5, OCZ 120GB SSD

Problem with repair

Hi just wondering has anyone had this problem with Lenovo I bought an idea centre 750 in November 2014 and it wasn't shuting down properly the fan would still run so I rang up and told them there was a hardware problem they were very nice on the phone apologised and said it would have to be sent off for repair .... Far enought I agreed !! These things happen ok so then I received my computer back 4 weeks later and all they did was reinstall windows .... A waste of my time a monkey could do that !! The problem was still there so I returned it after I got no where with costumer support saying that it should have been fixed !! So sent it back again took another 4 weeks and recieved it yesterday went to open the box and all the glass from the screen was smashed to pieces the sides of the boxes it was packed in had no protection !! How stupid can you be !! Now I'm waiting to ring them again on Monday and demand a replace or my money back spent a lot of money on this and feel I have been robed !! Anyone any advice ?

Just a quick update rang Lenovo and once again they have done nothing they want to send my computer away again for another 4 week for there own lack off packaging any other company would have replace it by now best advice to anyone buy off dell cause Lenovo ain't worth **bleep** !! Customer service is a big deal too bad I was late finding that out they will do only the bare minimum for you I bought this computer in November 2014 might actually get it mid April to use .......... Complete joke !! Looking into small claims court over this

Cost price Problem for repair FG.

hi,
Business scierio-
Mat "A' Done GR aginst Production order, Now the Same FG undergone the repair, we use to do Creating New FG Mat "B" and making old FG (mat "A") as a component of Mat "B" .
Note- for every FG we having the BOM (universal).
Now the Problem is- Components used in Mat "A" having Valution is MAP (CP), but the FG Valuation is Standard price (Selling Price).
During issue of Mat "A" to floor the selling price get updating in the cost price GL account During repair process.
What should i do to get the actual Cost price for Mat B.
Is it require to change the valuation of the Old FG i,e Mat "A" in to actual Cost Price before issuing to floor?
Waiting for reply
Veera.

While creating cost estimate with Qty Structure, first BOM is exploded by the system & prices are picked up from material master as per this sequence.
Ideally, the 1st preference should be - valuation according to price control in MM.
so that if a material is valued at MAP, it's MAP will be picked up for costing & if valued at Std Price, it's std price will be picked up.
In your case 1st it will check for Planned Price 1. If the system finds a value in the Planned price 1 field (costing view), this value is taken as the value for valuating the material & so on.
Regards,
Amol

Problem when repairing disk permissions

When I repair my disk permissions I always get this message after its completed:
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Is that a problem or should I just ignore it?

You can ignore it. See this Apple message: http://support.apple.com/kb/TS1448?viewlocale=en_US
Bob N.

Problem with repair error 1311, and trouble reinstalling.

I am having problems with reader, so I tried to do a repair but got error 1311. I uninstalled not im having trouble reinstalling...

Error 1311, 1335, or 2350 "Source file not found...data1.cab" |Install Adobe products | Windows

Can you help? -- Browser Webpage Loading Problems after Repairing File Permissions with Disk Utility

Hello,
I have been experiencing extremely slow startup times and slow application startup times for the past month on my 7-month old iMac.
I read in many places, including the Apple communities, that "repairing file permissions" using the Mac Disk Utility would help. So I ran it and now all my browsers including Safari and Firefox will not load or take 5 to 10 minutes to load a webpage - especially websites that have login features (eg. Gmail, Facebook, Hotmail).
As of my last re-start, Firefox will not load webpages and Safari is extremely slow at opening anything.
Has this problem occured for anyone after "repairing file permissions"?
And can anyone assist?
Thank you,
Shane

The Solution?
REINSTALL OSX using the Install DVD.
I called APPLE Support and we went through a troubleshooting process to rule out Network Issues, Software Issues, File Issues and Hardware Issues. This process was very thorough.
In the end, we used the Operating System Installation DVD to reinstall the system, which took about 60 minutes including downloading the updates. Reinstallation did not affect any files or lose any applications. Everything was as I left it -- nothing was missing. Easy.
Now everything is back to normal.

Apple couldn't replicate my problem during repair, what can I do?

Hi,
About two weeks ago, my macbook air bought in october 2012 (recently) suddenly wouldn't boot at all in the morning (despite working fine in the evening and being charged during the night.) I brought it in for repairs, and about 5 days later I got it back. After having used it for a couple of hours the same evening I got it back, the screen would suddenly go blank or lose its backlight, or the power would go off altogether (I guess, since the caps lock-light also turned off.) I brought it back to the apple store the next day.
A couple of days later, I got a call from an apple employee asking for further details about what triggered the issue so I told them as much as I remembered, and the day after I got another call from an employee stating that they couldn't replicate the issue. He thus wondered if I wanted it back as it was, or if they should send it back to service once more. As I didn't want my computer back if they had done nothing to it at all (except failing to replicate the issue), I told him that I wanted it sent back to service. He told me there wasn't much chance that they would be able to replicate the issue. Now it's been 6 days and today was when the Apple employee expected it to return from service. I haven't got a call from them.
I am going to call them soon if I don't hear from them, but I would greatly appreciate some advice of what to do in case they have failed to replicate the issue once more (and thus haven't fixed the computer at all). I have been very stressed out about this business both because I am studying my fourth year at college (computer science major) and I need to finish a programming project in less than two weeks, and also because the $1500 I spent on the Macbook Air (I got upgraded ram and processor) is a lot of money for me as a student. I dread getting it back and then getting the same errors as before when I am programming my project. Is it really up to me to be able to replicate the issue?
I currently live in California (which is where I ordered the computer from Apples website), in case it makes any difference.
Any advice is welcome.

After having read your link, I also think that seems reasonable. I'll ask them when I call them. Do you happen to know why the SMC could have been corrupt in the first place? They replaced the logic board during the previous repair (from which I just had got it back when these problems occured), could that affect the SMC?
I wish they'd explained more about this when they called me, then I maybe would've been able to remember more relevant circumstances about when the problem occured...

Problems with repairing external HD for use with TM

I've been trying all day to fix this. It was working earlier no problem, then when I went to restart my computer(after reinstalling mac osx) due to updates, i've been having trouble ever since. It doesn't mount, but yet it shows up in the disk utility. I've tried to repair it, and I get this:
2008-11-30 20:41:26 -0500: Verify and Repair volume “Time Machine Backups”
Starting repair tool: 2008-11-30 20:41:26 -0500
2008-11-30 20:41:26 -0500: Checking Journaled HFS Plus volume.
2008-11-30 20:41:26 -0500: Detected a case-sensitive catalog.
2008-11-30 20:41:26 -0500: Checking Extents Overflow file.
2008-11-30 20:41:26 -0500: Checking Catalog file.
2008-11-30 20:42:36 -0500: Checking multi-linked files.
2008-11-30 20:42:41 -0500: Checking Catalog hierarchy.
2008-11-30 20:46:04 -0500: Checking Extended Attributes file.
2008-11-30 20:46:10 -0500: Invalid record count
2008-11-30 20:46:10 -0500: Volume check failed.
2008-11-30 20:46:10 -0500: Error: Filesystem verify or repair failed.2008-11-30 20:46:10 -0500:
2008-11-30 20:46:10 -0500: Disk Utility stopped repairing “Time Machine Backups” because the following error was encountered:
Filesystem verify or repair failed.
2008-11-30 20:46:10 -0500:
Any suggestions or ways to fix this? All my files are on this HD...

One of the things you listed is a case-sensitive filesystem which can be troublesome.
Run DU and look at your internal HD.
Click on the partition and down below you will see Format: Mac OS Extended (Journaled)
I believe that it will also say "Case Sensitive" if it is.

Sound problem after repair

Hi
I have just received my Imac back from being repaired (an uneven screen colour problem).
On turning on the machine it was obvious the sound was distorted, on investigation it seems only from the right hand speaker.
I suspect it will have to go back again, but just wondered if anyone has any suggestions?
Thanks
Steve

It is quite possible that Apple somehow damaged your iMac's speakers when you sent it in to be fixed. Apple makes you agree to a disclaimer saying that they are not responsible for damage to your Mac. But there is good news. There are many great speaker systems that you can get for a moderate price instead of paying to get your standard speakers fixed. I just bought Harman Kardon: Soundsticks III speakers and i love them. You get a large powerful subwoofer and 2 speakers with a surprising amount of volume. They come in around $169.95, which is not bad for the incredible, crisp, and clear sound I receive out of my speakers. I would eliminate the service charge by buying these speakers. That way, you not only have solved your speaker issue, but you have eliminated your pesky service charge. If you don't feel like buying these speakers, then look in system preferences under sound. Go to output and make sure that the balance is in the middle and not all the way to the left.

Problem In Repairing Aino

Similar Messages

Maybe you are looking for