Problem with burning with Encore

Hi
I'm new at using Encore, and I need help badly!
I've edited my project with Premiere Pro CS3, exported it to Encore in order to create the menus, after doing so, every time I press build, a software error comes up stating:
PGC "File name" has an error at 01:25:40:15 (end of timeline) internal software error: %0, line try again - PGC Info: name= try again, ref= Bpgc, time= 01:25:40:15
Has anyone come accross such error before??
Thanks,
Nadya

I just finished the complete training from Total Training on Encore. Even though it was version 2 it got me through the basics. I ran my check project and all was fine. I started the Build process and got the following error message
PGC "NTSC_Floral Submenue_2" has an error at 00;00;11;28. internal software error;%0, line NTSC_Floral Submenue_2 - PGC Info; name = NTSC_Floral Submenue_2= Kpgc,time=00:00:11:28
Now I am stuck. I have no Idea where to turn. I just loaded this New CS3 upgrade last week. I paid for the training and now have a completed project I can't get out...... Any Ideas

Similar Messages

Problem while burning with my eMac

Hi,
I've got my Emac for a little more than one year and now I can't burn CD anymore
I don't understand beacause I burned less 15 CD. It's very cheap
It's strange, because my combo can read CD or DVD but not burning.
And the Hardware Test didn't found any errors :-/
Informations about my combo are:
Fabricant:     HL-DT-ST
Modèle:     HL-DT-ST RW/DVD GCC-4481B
Révision:     2.05
Numéro de série:
Type de disque:     CD-RW/DVD-ROM
Gravure du disque:     Géré/Livré par Apple
Support amovible:     Oui
Disque amovible:     Non
Protocole:     ATAPI
Numéro de lunité:     0
Type de socket:     Interne
I read some thing about firmware but where can I find it ? Apple don't provide it and didn't say anything about this problem... It is not fun

I too am having trouble with burning...It tries to burn then I get an error, communication to the drive failed, so it won't burn and disk can no longer be used.
What could be causing this. I'm obviously not the only one with burning problems, but I don't like that I can't burn, therefore cannot make backups of my files. This is bad.
Please can anyone help?

Deadline Panic--Encore Subtitles Do Not Burn with DL link Project

I have a big SD DV project that I DL ed to Encore where I did the usual Menu and Chapter Work, and this time I added subtitles. They are made by the book, per the docs, as shown in the tutorials, and they preview perfectly from the Encore Monitor, as do all the other Encore parts. The problem is that the subtitles not burn to the DVD--nada, nothing, zilch, zip, nicht. Everything else burns from Encore CS4 and everything else works perfectly.
I could have done the subtitles in PrCS4, but there were a lot and that operation simply goes a lot faster in Encore. But, the choice to do it there may have been a major mistake. However, I would like to salvage this if I can. I simply cannot find where I have missed any steps! It seems to me that if it previews in the Encore Monitor, it ought to burn. I have only one subtitle track and one audio track, which ought to be in compliance with the DVD standard.
I know this is perhaps not strictly the right forum, though it is related in essence because of the DL connectivity concept. I have, of course, posed the question in the Encore Subtitles forum, but don't expect any response from there in anything short of a week. Just not many posts ever in that forum. And I know that a lot of users here also burn their projects with Encore. Can anyone corroborate this as a bug, or tell me what might possibly be wrong?
Thanks very much.

Check your topic in the Encore forum.
-Jeff

Blu-ray disc burned with Encore CS4 stops after each chapter instead of reading continuously

Hi
Blu-ray disc burned with Encore CS4 stops after each chapter instead of reading continuously
This happens with an entire series of chapters but does not happen with another series of chapters on thre same DVD.
I am missing something to solve this issue.
Can anyone help?

Hi Jeff,
I just checked:
There is no override on the montage

Having problems with burning - need help please!

when I try and burn a disk itunes says no recording
software found. Everytime I start up itunes it says the drivers associated with burning are missing. It ask me to
reinstall the software which I do and I have the same
problem. I have other burning software but cant burn any
itunes Ive purchased do to the format. Any help would be greatly appreciated.
The german note is:
Achtung
Die Registrierungseinträge für die iTunes Treiber zum Import und Brennen von CDs und DVDs fehlen. Diese kann Folge der Installation einer anderen Software zum Brennen von CDs sein. Bitte installieren sie iTunes erneut.
Could anybody please help me??

I need more information about your hardware configuration. Run the iTunes Help menu -> Run CD Diagnostics... command and post the results here.
I'm assuming that you're not running 64-bit windows.
It sounds like the driver didn't get installed. You could try doing a repair install on iTunes --
Windows Start menu -> Settings -> Control Panels -> Add or Remove Programs
Select iTunes, Select Change/Remove button, Select "Repair" radio button, click OK.
If that doesn't work, you might try downloading just the CD drivers from :
http://www.gearsoftware.com/support/drivers.cfm
Get the first link, not the second one that talks about gearsec compatibility.

Problem with burning audio CD's in iTunes 10.x.x

Just had a situation where I had to burn three sets of CD's, each with similar (but not exactly the same) audio tracks. I labeled the discs CD_01, CD_02 and CD_03. The files are recorded .mp3 music tracks. I was sure that each playlist I created for each CD in iTunes contained the correct cuts, though after they were burned as music CD's, the Mac Pro computer and iTunes seemed to get confused about which CD # and playlist was loaded. iTunes apparently did not burn the correct playlist that was selected.
I re-burned the discs and when I thought they were finally right, we tested the master discs on our car stereo, and we could see all the track information fine and that the CD disc numbers were correct. However, when we made duplicates of those master files, once again the computer and iTunes again appeared to be confused! The disc master that had been confirmed to be CD_02 was now coming up as CD_01!! And when I loaded the discs into a different computer with iTunes 11, none of the track information that was once visible could be seen! The disc was called "Audio CD" and each track was reduced to just a number. Now my fear is that I have sent out discs with all incorrect versions on them !
Has anyone else had issues similar to these when burning audio CD's?
Thanks!

I also seem to have problems burning with the new iTunes 7. I thought it was neat I could backup my whole collection and that worked fine. But just burning an audio CD seems to be a problem. I've successfully burned one and this was accomplished by deleting one song from the playlist. I'm not trying to burn multiple CD's from a long playlist.
iTunes.
1. Checks media Ok .
2. The message says it's initailizing the disk.
3. The first song starts to burn and it stays there showing NO progress. It never burns.
What I've tried also is lowering the burning speed, unchecking and rechecking boxes in the burning preferences (like including text). I've used different media.
Seems to be a bug.

My computer shuts down with an "unrepairable hardware problem" when burning a DVD with Premier Elements 10

What causes my computer to shut down with a hardware problem while burning a video to DVD from Premier Elements 10?

air traffic controller
What computer operating system is your Premiere Elements 10 running on?
If not asked before, what video card/graphics card does your computer use? NVIDIA GeForce? If so, please read Announcement at top of this forum describing the Premiere Elements 10 NVIDIA GeForce issue and related how to solution information.
Please review the Adobe document dealing with troubleshooting burn to disc issues
http://helpx.adobe.com/premiere-elements/kb/troubleshoot-system-errors-freezes-burning.htm l
After that, we can decide what next if necessary.
If any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Problems with burned CDs.....

Can someone help me figure out why my Burned CDs won't work on my mac if they were burned with Nero 6 for Windows (I burned several CDs on my PC and when they are inserted in my iBook, three minutes later, they get ejected!) I am wondering how I can fix this, because I also seem to have a problem being able to burn CDs from the finder as well (blank CDs don't show up in the finder, and disk utility says that I am unable to burn CDs, but I have been able to burn them 2 months ago!) please help me out if you know what is going on! I am really frustrated about this!

Hello all you super smart people! Ok, I downloaded an ISO file. Now I want to run the program that is inside that cute little file. So, I have done every thing I can think of to get that puppy to go. I have burned as image in toast...I have tried to convert to master cd in disk utilities...wasted about a dozen cd's. But every time I think I have it burned all nice and pretty, I put the disk in and low and behold the disk is not readable by my mac...can't even get the PC to read it. However, I did burn one disk that I could not run on mac but could open all the zillions of files on the PC...but I want the program to run:-( Please all you nice little cumputer geeks out there, help me. I did read somewhere that I could go into the terminal and paste in some code and that would change the ISO image into a DMG image. But the last time I messed with my terminal I just about killed my computer...actually did kill it, but fixed it:-) please help with step by step. Thanks so very very much!!

Problem with Burning DVD/Audio

iMovie HD version 5.0.2. I have been editing movies and burning DVDs for more than a year and have not encountered this problem before. When I play my latest movie, there doesn't seem to be a problem with the music that I imported in only one of the audio tracks. However, when I try to burn a DVD, the video encoding proceeds as usual but the audio encoding stalls when it appears to be about 90% complete. I have produced movies that are 2 hours long and have not run into this problem. The current movie is a little over 1 hour long, so I don't think the length is a problem.
Background info: As in the past, the source of the movie I am editing is a DVD that Walmart converted from old video films. I CINEMATIZED the DVD which I have done in the past to be able to edit the movie. When I copied the WALMART version of the movie, I only imported/copied the video portion and NOT the audio.
I hope this explanation of my problem is detailed enough. I am not very technologically educated so I am limited in my ability to explain the details.

Hi
May be this applies.
*No audio on DVD disc.*
Most common origin:
1 Imported audio from iTunes:
• In iTunes copy out as an audio-CD .aiff
• Use this in Your movie project
2 Strange audio formats like .mp3, .avi etc.
• Change them to .aiff. Use an audio editor like Audacity (free)
Before burning the DVD:
• Do a DiskImage (File menu and down)
• Double click on the .img file
• Test it with Apple DVD-player
If OK:
• Make Your DVD - or -
• Burn from DiskImage with Apple Disk Util tool - and at an as slow speed as possibly eg x1
• OR burn with Roxio Toast™ if You got it
Yours Bengt W

Problem with burning DVD's

I have Roxio Toast Titanium and I have a problem with burning DVD's. When I put a blank DVD-R in my superdrive, select the files and go to burn; the advanced recording options will not let me deselect the check in "close disk". It is shaded. But when I use a CD-RW I can and so far the Roxio help has...well has not been help at all. I mean why would I spend the money to buy a software package that lets me do the same thing as the basic OS-X disk utility would let me do? Drag a file, burn it and close the disk from any future use....
Sorry if this does not belong here, I did not see a area for general software questions way back in the main forum area not one here.
Rob

Donald,
Hi and thank you.
To give you more details on what I am trying to do; I am trying to burn in Mac & PC format. I am mainly trying to back up all my assorted college files (I am a college student), these files are lecture notes in Word with embedded audio recordings, standard Word documents such as essays, etc., spreadsheets, PDF documents, etc. The files I am attempting to burn should not be larger than 4.7 gb and Roxio has not given me a warning that it would be.
I am just frustrated that when I put in a DVD-R or -RW I only have one option, and that is to close out the disk when it is finished burning it. I have also gone to the recording tab, on the menue bar, to uncheck the "close disk" box after I put in a blank DVD and before I select files to burn. The option is shadded preventing me from even trying, which is not the case for a CD!
Thank you!
12 PowerBook G4 Mac OS X (10.4.1)

DVD problem burning with iDVD..... PLEASE HELP ME !

hello,
i have a big problem during burning a dvd of a presentation of pictures from iphoto by idvd.
When the burning processing is almost finish i get this error:
"error during formatting process"
I never had this kind of problem previously,so i don't konw what's going on!
I am really worrie about it(i tried to change label of dvd,and i have 125 Gb free in my mac)
Please,anybody can help me?
thank you
alessandro

HI,
First, you tried different labels? I take this to mean you tried different media? Verbatim, Maxell to name just a few might be good.
Second... try repairing disk permissions.
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Next, please click My Settings on the right side of this window and tell us which Mac you have. The more details you provide, the easier to help you. Your profile indicates you are running 10.5 but you posted in the Tiger forum 10.4.. please update your profile.
Carolyn
Message was edited by: Carolyn Samit

Problem with burning DVD

Hi,
Is there anybody who can help me? I try to burn a lot of photos at DVD (DVD+R), but there are problems. Burning is OK, but veryfying not. Then I get the message "Sector 1 unreadeble" and that's it. I got a new DVD station in my iMac, but the problem still goes on.

Does your iMac have an internal CD/DVD drive, or are you using an external CD/DVD burner? If it's an external USB burner, do you have *ANY* other USB devices connected to your Mac other than your keyboard and/or mouse?

Help needed to track down Problem in tiger with Pioneer DVR-110D

ok as i stated in another topic i own a Beige G3 AIO that is running OS 9.2.2 and OS X 10.4.8 and i have done allot to this system to get it to run faster and to run properly.
part of this setup has a Pioneer DVR-110D it there and when i bought it i was running OS 9.2.2 only. at first i could not burn anything with it cause it wasn't supported and when i went to put the system to sleep it would freeze when i would wake it up it never did this before i installed the drive so i knew what was causing it.
i turned off HDD sleep and the problem was fixed. but i didn't like the ideal of having the hdd running all the time when idle. me and a friend was talking about optical drive issues and he said he found this driver replacement for the apple cd/dvd driver called intech speed tool's 6.0 for OS 9.2.2 and that i should give it a try cause it fixed a few problems for him.
i downloaded the demo of it and installed it and i turned on hdd sleep and put the system to sleep and woke it back up and the system was running great. so now the wake up freeze problem was cured. but still no burn support. so after a few weeks of posting on here about the problem some one came by and said he knew what the problem was and sent me a modded PioneerCDR authoring support extension. i installed it and rebooted and opened iTunes and iTunes showed Pioneer DVR-110D as the devise to burn to. so i tryed it and behold it burned a audio cd with no problems.
later i bought a western digital SE 120gb hdd and installed it and partitioned it 3 times a 8gb first partition for OS X a second partition 10gb for OS 9.2.2 and the 3rd partition was the rest of the drives size for shared data and storage. the hdd worked great with no issues so it was time to try OS X on this system cause i was waiting to get a large HDD to do so.
i figured that the Pioneer drive would not boot the OS X jaguar cd and is a known problem with non apple cd rom drives. so i took out the Pioneer and reinstalled the apple 24x stock cd rom drive. and the jag install cd booted without a hitch. Jag installed and was running so i updated to 10.2.8 and found out the internal screen kept going out and locking the system up. so i searched this forum for the onboard video blackout and came across the terminal work around to get the system to behave itself with having more than 192mb ram installed. i rebooted and all went fine afterward.
i reinstalled the Pioneer drive and went to testing it all was fine everything mounted on the desktop that i put in the drive. but i lacked the ability to burn with the drive cause still the drive wasn't supported be the system so i searched the forum and came across the program called patchburn. i downloaded it and ran it and patched the driver to support iApps burning with this drive. so i put in a blank cd and went to burn in iTunes it burned flawlessly so i tryed a dvd-r with the finder it to burned flawlessly.
o loved playing a game planeshift and then they stopped supporting 10.2.8 so i went to buy the tiger install cd's. i already knew the Beige G3 was not a supported version of Os X on this system and you had to use xpostfacto 4 to install tiger on this system. so i did what i had to do to install tiger on the system and selected use old NDRV and selected to install tiger. which installed some files to boot tiger and rebooted yet again the Pionner drive refused to boot the install cd's . i got mad and held down the command option power key's for about 10 seconds and let off. the tiger installer booted and got to where it started to copy the files to the hdd and stalled out and the drive spun down never to spin back up or show signs of life so i powered down the system and removed the pioneer drive and put the stock 24x cdrom in and installed tiger.
after tiger was installed i shut down the system and installed the pioneer drive. and powered back on and it was in verbose mode showing what was going on one part showed that the Pioneer drive was detected but had no kernel dependencies and continued to boot. i went to repair the permitions when the onboard video went blank and the system locked up. i rembered that 10.2.8 did the same thing so i tried the 10.2.8 screen blackout fix in 10.4 and rebooted. the onboard video didnt come on but since i had a ATI Radeon 7000 i could work around in tiger to update to 10.4.7 at the time. i first repaired permitions and then ran software update and updated everything and rebooted. the onboard video came back on allong with the ATI Radeon 7000 which being used as boot video device and shown the gray apple logo with the spinning pin wheel at the bottom.
so far tiger was running great so i put a disk in the drive and nothing it didn't mount anything so i ejected it with the button on front of the drive and tryed a dvd movie and got the same nothing as with the cd. so i rebooted with the dvd in the drive al behold tiger mounted the dvd but as soon as i would try to do anything with it the drive would stop and i would have to reboot the system to gain the drive back so i can repair permissions. and never tryed to use the drive again
10.4.8 update came out i updated to it using software update and rebooted. the update went flawless so i thought to myself what if the pioneer drive worked now. so i put a cd in the drive and it mounted the disk. then i ejected it with amazement and put a dvd in and it to mounted. so i tryed to play the dvd and it played the dvd to the end of the movie. i took out the dvd and rebooted. i tryed to put the dvd back in but it didnt mount. which ****** me off as to why it was just working and now its not.
i rebooted and the dvd mounted as soon as the desktop showed up so i tried to play it but this time it only played for about 10-13 minutes before the drive stopped spinning which made dvd player stop responding which made me have to force quit the dvd player and try to restart which gave me a kernel panic. so i forced restarted (got a forum to send to apple to report the KP so i did) and the dvd mounted once again as soon as the desktop showed so i ejected the dvd and put a audio cd in and it mounted and i played the hole cd. so i ejected that and put a blank cd in and treed to burn and it got to 30% and then the drive spun down and made the disk utility stop responding. so i forced quit disk utility and rebooted. once it rebooted nothing popped up so i pressed the eject button on the drive and the cd r came out.
the OS X 10.4.8 update made the drive more stable but still wont burn anything. some times it will still not mount anything, some time it will not play anything, and still fails to copy files over to the hdd. so now im left to believe its a driver issue some where since this drive worked so flawlessly in jaguar and OS 9 but fails to work properly in tiger.
i looked in the extensions in ASP in 10.4.8 and there is a few extensions showing errors. i made a list of them to show
PatchedAppleNVRAM:
Version: 3.0
Last Modified: 8/9/05 6:07 PM
Location: /System/Library/Extensions/PatchedAppleNVRAM.kext
kext Version: 3.0
Load Address: 0x4db000
Valid: Yes
Authentic: Yes
Dependencies: Incomplete
Dependency Errors:
com.macsales.iokit.OpenOldWorldNVRAM: No valid version of this dependency can be found
Integrity: Unknown
OpenPMUNVRAMController:
Version: 2.0
Last Modified: 8/9/05 6:08 PM
Location: /System/Library/Extensions/OpenPMUNVRAMController.kext
kext Version: 2.0
Load Address: 0x63a000
Valid: Yes
Authentic: Yes
Dependencies: Incomplete
Dependency Errors:
com.macsales.iokit.OpenOldWorldNVRAM: No valid version of this dependency can be found
Integrity: Unknown
GossamerDeviceTreeUpdater:
Version: 3.0
Last Modified: 8/9/05 6:07 PM
Location: /System/Library/Extensions/GossamerDeviceTreeUpdater.kext
kext Version: 3.0
Load Address: 0x63d000
Valid: Yes
Authentic: Yes
Dependencies: Incomplete
Dependency Errors:
com.macsales.iokit.OpenPMUNVRAMController: No valid version of this dependency can be found
Integrity: Unknown
that is the list of extensions that are reporting some sort of errors. at first i was figuring it was a problem with the driver for the Pioneer drive but my friend brought over his digital audio G4 which was also running 10.4.8. and we decided to try the drive in his Mac to see if there was any problems. it mounted everything we threw in it. it played dvd's great and played audio cd's great, it copied files over to the hdd without fail. it even burned a flawless cd. ok now the ideal of the driver for the drive was thrown out the window. so it has to be something else causing the problem. either a driver for a part on the motherboard or what i have no clue.
im just wondering what driver it would be causing a problem not allowing the Pioneer drive to work properly. cause its not the drive being bad cause it worked flawlessly in OS 9.2.2 and jaguar and in tiger in my friends digital audio G4
im just wondering if anyone might know what could be done to fix this problem cause i know it can be fixed but i don't know where to begin or how. so i ask you how could i begin to fix this
thank you all for baring with me and reading all this. i know i wrote allot but i had to explain what was going on before i could ask for help so you could better understand what was going on. i have already updated the firmware to the latest with no change the firmware use to be the old 1.11

yea i have along time ago and also made a update to xlr8's drive database. cause i fixed the problems with the drive in OS 9.2.2 (AKA no burn support with the built in burning app or iTunes, now have full support for burning with the finder burn and iTunes thanks to a edited PioneerCDR authoring support extension that someone edited for me. found out that the Apple CD/DVD driver extension was at fault for the locking up on wake up with hdd sleep enabled that started when i installed the Pioneer drive. fixed with intech CD/DVD speedtools 6.0).
When i did the first report on the drive database on xlr8yourmac i reported what problems i was having in OS 9.2.2 and i think i reported that i had no problems in jaguar, and was trying to obtain a driver or something to try to get it to work. but to no avail at first. after i fixed the problems i did a update report
in jaguar the drive had no problems but no burn support. installed patchburn and the drive worked 100% in jag no problems what so ever. im thinking it has somthing to do with one or all of the extensions with errors but i can be wrong.
i just wonder where ryan has been on the forums in OWC's site. cause i would like to submit my crash log panic log and the extensions with errors so he could help track down the problems to see if it cant be fixed. but ive tried emailing him but no replay's. and his last reply on the OWC forums was back in desember 2005 a few day's over a year
i know it isnt the drive cause it worked flawlessly in tiger 10.4.8 on my friends Digital Audio but i know why it worked fine cause it has the proper files for the DA to work cause its a supported system. i would like to try to help to get xpostfacto to work better on the Beige G3 system
in tiger if it is something to do with xpostfacto

No audio on dvd burned with idvd6

Relevant software: Mac OS 10.4.11, iMovie 6.0.3, iDvd 6.0.3
Problem: No audio on dvd burned with iDvd
What happened: Created movie in iMovie (audio and video fine). Shared to iDvd (audio and video fine on playback). Burned Dvd. No audio on dvd but video is fine.
What I did:
1. Saved as disc file. Opened with VLC and DVD Player. No audio, video fine.
2. Deleted encoded assets in iDvd then 1 (above).
3. Removed non-Apple extensions in Library/Quicktime. Then 2 and 1 (above).
I've read other discussions about this same issue and followed those recommendations as well as that in the article http://docs.info.apple.com/article.html?artnum=303550.
Clearly I'm missing something. But, what is it? Anyone have any suggestions?

i too am having the same problems with iDVD 6.0.4. I just ended up wasting 5 hours of time burning these damned DVDs... what was really strange is that the first DVD I burned was a dual-layer, and I checked that one on a set-top DVD player and it worked fine. I then needed 5 more copies of the DVD, so I simply inserted a fresh dual-layer DVD into the drive at iDVD's prompt of 'Would you like to burn this disc again?'.
Assuming that they would all be fine since the first one was fine, I simply burned 5 more DVDs. Only now, checking them after I've wasted a godawful amount of time burning them, do I find that they're all f#$ked. Thanks apple.
Crap like this makes me steamed. My PC burning software doesn't have nearly the same simple, elegant interface as iDVD, but it also lacks this CATASRTOPHIC problem. I mean, dual layer DVDs are relatively pricey... so screw apple. i will be glad to go home to my PC after being forced to work with this junky, buggy software.

Everything that has to do with burning a CD/DVD unexpectedly quits!!!!

When I am in 10.4.5 (or when I had 10.4.4) I cannot burn with Toast, iTunes, iDVD, etc. However, I have an Ext. HD with 10.4.2 and don't have any problem burning CDs/DVDs at all.
I recently upgraded my CDR/DVD-ROM with a Superdrive from OWC (MATSHITA DVD-RAM UJ-845S) which may be the problem. If it is then it is with the recent crop of operating system updates.
If anyone has this problem or how I can fix it let me know. It's a minor inconvenience, having to switch Startup disks, at best, but so is Windows XP.
Thanks
imac G5 17" ambient light Mac OS X (10.4.5)

Welcome to Apple Discussions.
I'd contact OWC here or give them a call @ 800-275-4576 and see if they can give you tech support through there.
Brian

Problem with burning with Encore

Similar Messages

Maybe you are looking for