Problem with Portal's SLD technical systems setup..
Hi guys,
I'm implementing ESS v60.2. and need to setup portal's SLD. When I'm trying to set-up Web AS ABAP system, I can select no Product (in the last step). System response, that the Product has no Components. I understand, that this is probably problem of basis, but...
Can anyone help, what to do?
Thanx, Peter
You should import the CR Content to the SLD to get the list of components. So, you do this by
Administration > Import(under Content) > In the Browse choose the path
<installation Drive >:\usr\sap\J2E\SYS\global\sld\model and choose CR_Content.zip and Press Import CR Content.
It will take some time like an hr or more to import. Be patient.
Now, you will see the produts.
Hope this helps,
Kumar
Similar Messages
-
There is a problem with the printer or ink system.
Will not print. Turn it off then back on; will print one document, but not the last page. Try printing only the last page, but will not print. Will not print one page documents at all. Will not print more than one document without repeating this process.
First Error message: "There is a problem with the printer or ink system. Turn the printer off, then on. If you continue to get this message, contact HP." Out of warranty.
Tried this page: http://support.hp.com/us-en/document/c03081973
Which led me to this page: http://support.hp.com/us-en/document/c03262508
Now that the ink cartridges are removed as instructed, the carriage will not return to the center of the access area.Hey @KennyBee51,
Thanks again for getting back to me regarding this issue.
I would have to agree that the HP Officejets Printhead system is defective. I would recommend at this time that you contact our Technical Support queue by phone to explore additional hardware options.
HP Technical Support can be reached at: 800-474-6836.
If you live outside the US/Canada Region, please click the link below to get the support number for your region.
HP Worldwide Contact
It has been a pleasure working with you. I wish you luck going forward with this!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping! -
Problem with the printer or ink system. Turn printer off message.
A message on the printer reads that there is a problem with the printer or ink cartridges. I turned off printer several times, I have replaced cartridges. At the bottom it says to contact HP. What do I do to get my printer working again? I also need to delete other printers that are listed as ones that I can use. I don't have any idea about these other printers other than the HP printer 6700, All in one.
Hi , I understand you are seeing an error stating there is an problem with the printer or ink system. If you have completed the solutions presented in the following document I suggest calling us: HP Officejet Printers - 'Problem with Ink System' Error Message Displays on the Computer During Setup. To reach somebody in tech support, what you can do, is use the following link to create yourself a case number, then call and it may help speed up the call process:
Step 1. Open link: www.hp.com/contacthp/
Step 2. Enter Product number or select to auto detect
Step 3. Scroll down to "Still need help? Complete the form to select your contact options"
Step 4. Scroll down and click on: HP contact options - click on Get phone number
Case number and phone number appear. -
I have an HP Officejet Pro 8600+ that is coming up with an error message. This just happened out of the blue yesterday. The printer is just over a year old.
It says:
"There is a problem with the printer or ink system. Print head missing not detected incorectly installed or incompatable"
I have removed and reinstalled ink cartridges, the head, unplugged, cleaned, etc. etc.
HP Officejet Pro 8600+
Product Number CM750A
Serial Number {Content Removed}
Not under warranty
Please advise.
This question was solved.
View Solution.Sorry that you are experiencing this problem. Here is a link that may assist you with the ink system.
http://goo.gl/BXDFf
It seems to be a bad print head, or it needs manually cleaned with lint free cloth and water. If these steps do not resolve the issue, contact HP Support (1800-474-6836).
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it. -
Problem with the printer or ink system code 0x610000f6 HP model 6700 premium
Hello, I have recieved an alert for the second time in a week stating that there is a problem with the printer or ink system. The alert prompts me to turn off, then on the printer. If problem persists, contact HP. 0x610000f6. What could be the cause for this type of alert to appear?
'0x610000f6' error message appears if there is a 'Paper Jam' or a 'Carriage Jam' in the printer.
You can experience following issues:
The product won't print.
The print job stops unexpectedly.
To resolve Error code '0x610000f6' follow methods provided in below mentioned link
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01620497 -
SLD Technical system data in ABAP table?
Hi All,
Can some one guide me ABAP table name where I can see all the SLD Technical system entries?
Or can read SLD Technical system entries via some BAPI/RFC.
RegardsCheck LCR_GET_BS_DETAILS. In se24 check for Cl_SLD* , you will get some classes which will help you get the information.
What are the Technical system data you are looking for ?
In program SXMS_PF_GET_OWN_IS_NAME_MC , go through the subroutine get_sld_content. -
SLD - Technical System general settings not all filled..is this a problem?
Hi all,
I don't really have any experience with the configuration of SAP PI, I just do some maintenance and small adjustments from time to time.
I noticed in the SLD in the Technical System settings of the AS JAVA that the following fields were not filled in the general tab:
I'm a bit worried since these fields are filled on our test environment, on our production environment they are not...
Installation Number: *** not yet assigned ***
System Number: *** not yet assigned ***
I can't just add this info, it seem I have to make remove the existing one and create a new entry.
Everything seems to be working fine so I'm a bit reluctant to try and chance this if it's not necessary.
So my question is, could it cause a poblem further on if these fields are not filled?
If so, can I fill these fields without removed the existing entry and creating a new one?
Thanks for any feedback provided.
Cheers,
BenjaminHi Michal,
thanks for your reply.
Would this be done via the SLD Data Supplier Configuration: SLD Data Supplier in the NWA ?
I don't have access to this in our production environment right now so I can't try.
If so, I'll try it later with a system admin.
B -
Urgent : Problem with Client when OC4J has been setup in 2 way SSL mode
This is the output that is generated in the JDeveloper console on running the example from b14429.pdf. Examle :
====================================================
import HTTPClient.HTTPConnection;
import HTTPClient.HTTPResponse;
import javax.security.cert.X509Certificate;
import oracle.security.ssl.OracleSSLCredential;
import java.io.IOException;
import javax.net.ssl.SSLPeerUnverifiedException;
public class SSLSocketClientWithClientAuth {
public static void main(String[] args) {
if (args.length < 4) {
System.out.println("Usage: java HTTPSConnectionTest [host] [port] " +
"[wallet] [password]");
System.exit(-1);
String hostname = args[0].toLowerCase();
int port = Integer.decode(args[1]).intValue();
String walletPath = args[2];
String password = args[3];
HTTPConnection httpsConnection = null;
OracleSSLCredential credential = null;
try {
httpsConnection = new HTTPConnection("https", hostname, port);
} catch (IOException e) {
System.out.println("HTTPS Protocol not supported");
System.exit(-1);
try {
credential = new OracleSSLCredential();
credential.setWallet(walletPath, password);
} catch (IOException e) {
System.out.println("Could not open wallet");
System.exit(-1);
httpsConnection.setSSLEnabledCipherSuites(new String[]{"SSL_RSA_WITH_3DES_EDE_CBC_SHA"});
httpsConnection.setSSLCredential(credential);
try {
httpsConnection.connect();
} catch (IOException e) {
System.out.println("Could not establish connection");
e.printStackTrace();
System.exit(-1);
// X509Certificate x509 = new X509Certificate();
//javax.servlet.request.
X509Certificate[] peerCerts = null;
try {
peerCerts =
(httpsConnection.getSSLSession()).getPeerCertificateChain();
} catch (javax.net.ssl.SSLPeerUnverifiedException e) {
System.err.println("Unable to obtain peer credentials");
e.printStackTrace();
System.exit(-1);
String peerCertDN =
peerCerts[peerCerts.length - 1].getSubjectDN().getName();
peerCertDN = peerCertDN.toLowerCase();
if (peerCertDN.lastIndexOf("cn=" + hostname) == -1) {
System.out.println("Certificate for " + hostname +
" is issued to " + peerCertDN);
System.out.println("Aborting connection");
System.exit(-1);
try {
HTTPResponse rsp = httpsConnection.Get("/");
System.out.println("Server Response: ");
System.out.println(rsp);
} catch (Exception e) {
System.out.println("Exception occured during Get");
e.printStackTrace();
System.exit(-1);
================================================================
C:\j2sdk1.4.2_09\bin\javaw.exe -client -classpath "D:\eclipse\workspace\OC4JClient\OC4JClient\classes;D:\eclipse\workspace\jdev\extensions\.jar;C:\Documents and Settings\nilesh_bafna\Desktop\Nitin\lib\jssl-1_1.jar;E:\product\10.1.3.1\OracleAS_1\j2ee\home\lib\http_client.jar;E:\product\10.1.3.1\OracleAS_1\jlib\javax-ssl-1_1.jar" -Djava.protocol.handler.pkgs=HTTPClient -Djavax.net.debug=ssl -Djavax.net.ssl.keyStore=F:/oc4jcert/client.keystore -Djavax.net.ssl.keyStorePassword=welcome1 -Djavax.net.ssl.trustStore=F:/oc4jcert/client.keystore -Djavax.net.ssl.trustStorePassword=welcome1 -DOracle.ssl.defaultCipherSuites=SSL_RSA_WITH_RC4_128_MD5 SSLSocketClientWithClientAuth ps4372.persistent.co.in 443 F:/oc4jcert/client.keystore welcome1
keyStore is : F:/oc4jcert/client.keystore
keyStore type is : jks
init keystore
init keymanager of type SunX509
found key for : oracle-client
chain [0] = [
Version: V3
Subject: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: SunJSSE RSA public key:
public exponent:
010001
modulus:
87fcc8e9 0ffcef8e 61f3be10 be7c9715 2792849b 3bbdeb1c cc76b337 4b82bbab
86972c63 9af3adfd 35b5df99 9078a0d1 6dc760d8 0549a95a bfa7648a 9eadd326
a6bc4b61 d8f8b42f 44e0b178 ff1dee20 db8406cd d800c26a 9c5a6ed9 4d6f2aef
bc919814 3b46be39 e129280c e83afe12 c9d4e3d7 fb5787b1 d98bed4a 4f0833d5
Validity: [From: Thu Jan 18 21:18:14 GMT+05:30 2007,
To: Wed Apr 18 21:18:14 GMT+05:30 2007]
Issuer: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
SerialNumber: [ 45af96be]
Algorithm: [MD5withRSA]
Signature:
0000: 41 47 35 41 90 10 E3 77 A7 F3 F5 81 37 49 4F 57 AG5A...w....7IOW
0010: 01 11 82 A2 FB 69 46 E8 18 6C EE 11 23 A6 67 2E .....iF..l..#.g.
0020: 68 4D D6 A6 E7 09 45 24 58 18 9A E5 44 49 10 9B hM....E$X...DI..
0030: F1 EC 99 4A 45 5F A4 4F 71 3F 05 3D 45 29 42 CD ...JE_.Oq?.=E)B.
0040: 11 87 DA 0C AA DC 55 4E CF 22 4A 94 85 CB E5 EB ......UN."J.....
0050: BA E1 10 D2 C8 80 2C 6B 65 94 13 01 1F 6E 18 C3 ......,ke....n..
0060: 87 33 8C 65 C7 03 16 03 24 FB 0D B0 6D D8 E7 AA .3.e....$...m...
0070: A1 A5 48 90 0D D6 8C 47 50 2A AA 7C 7B 14 E5 B7 ..H....GP*......
trustStore is: F:\oc4jcert\client.keystore
trustStore type is : jks
init truststore
adding as trusted cert:
Subject: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
Issuer: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
Algorithm: RSA; Serial number: 0x45af96be
Valid from Thu Jan 18 21:18:14 GMT+05:30 2007 until Wed Apr 18 21:18:14 GMT+05:30 2007
adding as trusted cert:
Subject: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
Issuer: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
Algorithm: RSA; Serial number: 0x45af95dc
Valid from Thu Jan 18 21:14:28 GMT+05:30 2007 until Wed Apr 18 21:14:28 GMT+05:30 2007
init context
trigger seeding of SecureRandom
done seeding SecureRandom
%% No cached client session
*** ClientHello, TLSv1
RandomCookie: GMT: 1152299454 bytes = { 41, 212, 166, 48, 109, 77, 185, 232, 204, 95, 158, 141, 60, 96, 196, 172, 49, 19, 49, 22, 222, 234, 47, 76, 27, 130, 5, 176 }
Session ID: {}
Cipher Suites: [SSL_RSA_WITH_RC4_128_MD5, SSL_RSA_WITH_RC4_128_SHA, TLS_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_DSS_WITH_AES_128_CBC_SHA, SSL_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA, SSL_RSA_WITH_DES_CBC_SHA, SSL_DHE_RSA_WITH_DES_CBC_SHA, SSL_DHE_DSS_WITH_DES_CBC_SHA, SSL_RSA_EXPORT_WITH_RC4_40_MD5, SSL_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA]
Compression Methods: { 0 }
main, WRITE: TLSv1 Handshake, length = 73
main, WRITE: SSLv2 client hello message, length = 98
main, READ: TLSv1 Handshake, length = 839
*** ServerHello, TLSv1
RandomCookie: GMT: 1152299454 bytes = { 206, 186, 162, 116, 179, 72, 44, 198, 189, 25, 70, 227, 170, 235, 83, 186, 152, 49, 194, 222, 248, 3, 191, 170, 248, 95, 134, 35 }
Session ID: {69, 175, 178, 190, 47, 141, 131, 115, 241, 226, 39, 29, 241, 65, 235, 165, 57, 40, 52, 85, 68, 85, 68, 84, 108, 141, 1, 125, 193, 191, 158, 208}
Cipher Suite: SSL_RSA_WITH_RC4_128_MD5
Compression Method: 0
%% Created: [Session-1, SSL_RSA_WITH_RC4_128_MD5]
** SSL_RSA_WITH_RC4_128_MD5
*** Certificate chain
chain [0] = [
Version: V3
Subject: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: SunJSSE RSA public key:
public exponent:
010001
modulus:
6f24d75b 96919725 ad6ea93a cab0bd96 a49d2f3c e14f5c09 0e228e36 de64e0f2
f2b82740 1653bdb4 5024d281 21ed8c4c 89bc322b 4dc9ffb2 0e97cd95 16e6fe1e
380340c9 f3c67e2c 18d06461 f4f30eaf 4394716e 7bc66d80 810a9cb5 9c168b36
cdd99919 67074ebc edebf02e ebf0accb 2193bc38 7ae1cdda af5ff300 ed0e7763
Validity: [From: Thu Jan 18 21:14:28 GMT+05:30 2007,
To: Wed Apr 18 21:14:28 GMT+05:30 2007]
Issuer: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
SerialNumber: [ 45af95dc]
Algorithm: [MD5withRSA]
Signature:
0000: 05 4E EE 12 5B DD 7F 26 92 37 67 C9 D0 73 46 4D .N..[..&.7g..sFM
0010: 7E A5 1E 67 38 06 D9 5F 9F B7 2F E8 F6 9E BF 88 ...g8.._../.....
0020: 01 31 7D EA 42 5E 4F 9E D7 8F DA 9F 94 A5 EF 47 .1..B^O........G
0030: E3 E9 BA DE 94 15 C6 03 DE C9 C0 7D CE 58 C0 27 .............X.'
0040: 0F 1A 66 EC 73 53 5D 1D DE 7E FA 35 15 E0 2A CC ..f.sS]....5..*.
0050: C9 74 CC 58 E9 B6 2F 68 A0 89 2B F3 E6 61 7D E1 .t.X../h..+..a..
0060: 21 AF BE E8 83 49 B1 BD 36 C5 2D 1B 0D A1 0E 63 !....I..6.-....c
0070: 02 4A 82 71 B0 E1 9C AD 55 67 F9 17 A5 96 18 EB .J.q....Ug......
Found trusted certificate:
Version: V3
Subject: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: SunJSSE RSA public key:
public exponent:
010001
modulus:
6f24d75b 96919725 ad6ea93a cab0bd96 a49d2f3c e14f5c09 0e228e36 de64e0f2
f2b82740 1653bdb4 5024d281 21ed8c4c 89bc322b 4dc9ffb2 0e97cd95 16e6fe1e
380340c9 f3c67e2c 18d06461 f4f30eaf 4394716e 7bc66d80 810a9cb5 9c168b36
cdd99919 67074ebc edebf02e ebf0accb 2193bc38 7ae1cdda af5ff300 ed0e7763
Validity: [From: Thu Jan 18 21:14:28 GMT+05:30 2007,
To: Wed Apr 18 21:14:28 GMT+05:30 2007]
Issuer: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
SerialNumber: [ 45af95dc]
Algorithm: [MD5withRSA]
Signature:
0000: 05 4E EE 12 5B DD 7F 26 92 37 67 C9 D0 73 46 4D .N..[..&.7g..sFM
0010: 7E A5 1E 67 38 06 D9 5F 9F B7 2F E8 F6 9E BF 88 ...g8.._../.....
0020: 01 31 7D EA 42 5E 4F 9E D7 8F DA 9F 94 A5 EF 47 .1..B^O........G
0030: E3 E9 BA DE 94 15 C6 03 DE C9 C0 7D CE 58 C0 27 .............X.'
0040: 0F 1A 66 EC 73 53 5D 1D DE 7E FA 35 15 E0 2A CC ..f.sS]....5..*.
0050: C9 74 CC 58 E9 B6 2F 68 A0 89 2B F3 E6 61 7D E1 .t.X../h..+..a..
0060: 21 AF BE E8 83 49 B1 BD 36 C5 2D 1B 0D A1 0E 63 !....I..6.-....c
0070: 02 4A 82 71 B0 E1 9C AD 55 67 F9 17 A5 96 18 EB .J.q....Ug......
*** CertificateRequest
Cert Types: RSA, DSS,
Cert Authorities:
<CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US>
*** ServerHelloDone
matching alias: oracle-client
*** Certificate chain
chain [0] = [
Version: V3
Subject: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: SunJSSE RSA public key:
public exponent:
010001
modulus:
87fcc8e9 0ffcef8e 61f3be10 be7c9715 2792849b 3bbdeb1c cc76b337 4b82bbab
86972c63 9af3adfd 35b5df99 9078a0d1 6dc760d8 0549a95a bfa7648a 9eadd326
a6bc4b61 d8f8b42f 44e0b178 ff1dee20 db8406cd d800c26a 9c5a6ed9 4d6f2aef
bc919814 3b46be39 e129280c e83afe12 c9d4e3d7 fb5787b1 d98bed4a 4f0833d5
Validity: [From: Thu Jan 18 21:18:14 GMT+05:30 2007,
To: Wed Apr 18 21:18:14 GMT+05:30 2007]
Issuer: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
SerialNumber: [ 45af96be]
Algorithm: [MD5withRSA]
Signature:
0000: 41 47 35 41 90 10 E3 77 A7 F3 F5 81 37 49 4F 57 AG5A...w....7IOW
0010: 01 11 82 A2 FB 69 46 E8 18 6C EE 11 23 A6 67 2E .....iF..l..#.g.
0020: 68 4D D6 A6 E7 09 45 24 58 18 9A E5 44 49 10 9B hM....E$X...DI..
0030: F1 EC 99 4A 45 5F A4 4F 71 3F 05 3D 45 29 42 CD ...JE_.Oq?.=E)B.
0040: 11 87 DA 0C AA DC 55 4E CF 22 4A 94 85 CB E5 EB ......UN."J.....
0050: BA E1 10 D2 C8 80 2C 6B 65 94 13 01 1F 6E 18 C3 ......,ke....n..
0060: 87 33 8C 65 C7 03 16 03 24 FB 0D B0 6D D8 E7 AA .3.e....$...m...
0070: A1 A5 48 90 0D D6 8C 47 50 2A AA 7C 7B 14 E5 B7 ..H....GP*......
JsseJCE: Using JSSE internal implementation for cipher RSA/ECB/PKCS1Padding
*** ClientKeyExchange, RSA PreMasterSecret, TLSv1
Random Secret: { 3, 1, 236, 206, 185, 158, 75, 201, 230, 16, 170, 40, 193, 70, 188, 134, 36, 134, 14, 20, 191, 121, 246, 8, 7, 2, 137, 66, 166, 10, 185, 246, 104, 154, 27, 82, 161, 133, 11, 130, 11, 130, 71, 84, 155, 165, 239, 227 }
main, WRITE: TLSv1 Handshake, length = 763
SESSION KEYGEN:
PreMaster Secret:
0000: 03 01 EC CE B9 9E 4B C9 E6 10 AA 28 C1 46 BC 86 ......K....(.F..
0010: 24 86 0E 14 BF 79 F6 08 07 02 89 42 A6 0A B9 F6 $....y.....B....
0020: 68 9A 1B 52 A1 85 0B 82 0B 82 47 54 9B A5 EF E3 h..R......GT....
CONNECTION KEYGEN:
Client Nonce:
0000: 45 AF B2 BE 29 D4 A6 30 6D 4D B9 E8 CC 5F 9E 8D E...)..0mM..._..
0010: 3C 60 C4 AC 31 13 31 16 DE EA 2F 4C 1B 82 05 B0 <`..1.1.../L....
Server Nonce:
0000: 45 AF B2 BE CE BA A2 74 B3 48 2C C6 BD 19 46 E3 E......t.H,...F.
0010: AA EB 53 BA 98 31 C2 DE F8 03 BF AA F8 5F 86 23 ..S..1......._.#
Master Secret:
0000: CA 5C BA B3 D0 C9 26 A9 3A 06 08 8F 27 2E CE 17 .\....&.:...'...
0010: 93 98 BC DF EF 78 2A 99 DB 3E 50 3B 01 D1 84 5F .....x*..>P;..._
0020: 28 80 CE 7C 7C C1 12 A4 11 F6 33 9B 2E D9 6F BE (.........3...o.
Client MAC write Secret:
0000: 80 FF CE 99 7C 45 4C D8 60 FA 40 79 A2 A4 36 7C .....EL.`[email protected].
Server MAC write Secret:
0000: 2D F1 A0 A8 ED A1 7B DD 89 A5 01 90 43 BF F1 19 -...........C...
Client write key:
0000: E1 3F 33 54 D3 C5 3A 26 4A 41 65 DA AC 44 3B 28 .?3T..:&JAe..D;(
Server write key:
0000: C5 08 52 AE A9 0A 4F D0 AD 54 49 C6 4E 2F 9C 4E ..R...O..TI.N/.N
... no IV for cipher
JsseJCE: Using JSSE internal implementation for cipher RSA/ECB/PKCS1Padding
*** CertificateVerify
main, WRITE: TLSv1 Handshake, length = 134
main, WRITE: TLSv1 Change Cipher Spec, length = 1
main, handling exception: java.net.SocketException: Software caused connection abort: socket write error
main, SEND TLSv1 ALERT: fatal, description = unexpected_message
main, WRITE: TLSv1 Alert, length = 2
Exception sending alert: java.net.SocketException: Software caused connection abort: socket write error
main, called closeSocket()
IOException in getSession(): java.net.SocketException: Software caused connection abort: socket write error
Unable to obtain peer credentials
javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated
at com.sun.net.ssl.internal.ssl.SSLSessionImpl.getPeerCertificateChain(DashoA12275)
at SSLSocketClientWithClientAuth.main(SSLSocketClientWithClientAuth.java:56)
Process exited with exit code -1.
=====================================================
I think this is the problem with ciphers. So can anybody please help me with this!!!. This is very urgent!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thanks in advance
NileshThanks for your prompt reply I was able to make it run. Actually I am using the same keystore and truststore at both the client and the server end. I added those properties in opmn.xml as startup parameters.
I have another query I am using JDev to create a client proxy for my webservice that is deployed in OC4J. I have setup OC4J in 2 way SSL (mutual authentication)
When I invoke my client proxy with these system properties set
System.setProperty("javax.net.ssl.keyStore",keyStore);
System.setProperty("javax.net.ssl.keyStorePassword", keyStorePassword);
System.setProperty("javax.net.ssl.trustStore", trustStore);
System.setProperty("javax.net.ssl.trustStorePassword",trustStorePassword);
System.setProperty("javax.net.ssl.keyStoreType","JKS");
System.setProperty("javax.net.ssl.trustStoreType","JKS");
I get an exception in the log.xml which is
<MSG_TEXT>IOException in ServerSocketAcceptHandler$AcceptHandlerHorse:run</MSG_TEXT>
<SUPPL_DETAIL><![CDATA[javax.net.ssl.SSLProtocolException: handshake alert: no_certificate
at com.sun.net.ssl.internal.ssl.ServerHandshaker.handshakeAlert(ServerHandshaker.java:1031)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.recvAlert(SSLSocketImpl.java:1535)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:863)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1025)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1038)
at oracle.oc4j.network.ServerSocketAcceptHandler.doSSLHandShaking(ServerSocketAcceptHandler.java:250)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:868)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
]]></SUPPL_DETAIL>
Isn't setting these properties enough for sending a client certificate. Please help!!!!
Thanks,
Nilesh. -
PI7.0: SLD - Technical System of type "Exchange Infrastructure"
Hi Guys,
The adapter engine was empty in the integration directory and as part of it i followed the steps in the sap note - 764176 Error in XI due to inconsistency in the sld. I did the following steps
1. Switch to "Home" in the "Technical Landscape" view, and select the
"Exchange Infrastructure" technical system type there. Select all
domains and XI components for the host and delete these by selecting
them and pressing 'Remove'.
2. Restart the J2EE server. After you restart the server, the XI
components log on to the SLD again and create a new entity of class
"XI Integration Server".
3. To register the directory and repository again, you must also log on
to the two tools.
I have restarted the j2ee server and looged into the IR and ID but they are not automatically registered in the central sld.
central sld is on solmanger box. How to register IR, ID, RWB and central adapter engine under the technical systems of type exchange infrastructure ?
any help would be really appreciated
Thanks,
RajHi Reddy,
i faced the same problem few days back...
check this link
/people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
and also cross-check the post installation steps.
In my case the Business system for XI was created of type web as java... but it should be of type web as abap.
Sachin -
SLD Technical System Process Integration
Hi XI Gurus,
I have a question regarding the 5th type of Technical Systems, Process Integration. Is it automatically generated once XI is restarted? In Note 764176, it's telling me to remove the PI technical systems. How can I recreate them? Will they be generated automatically or will we input them manually? Thanks!Hi,
Ideally, you need to have 2 Technical System entries for your PI system and 6 entries for Technical System Type 'Exchange Infrastructure'.
the first category (i.e 2 systems) suppose to get deployed automatically using RZ70 (ABAP) and SLD Data Supplier (java).
And the 2nd catergory (i.e 6 entries) suppose to also get deployed automatically but in case, If you do not find them all here is the workaround to get them
1. If XI Integration Directory or XI Integration Repository not found then, Please start these tools from default tools page (http://<hostname>:<http port>/dir) upon starting these 2 components you will see them added in SLD
2. If Adapter Engine not found then, logon NWA, stop & start XPI Service: AF Core & XPI facade: Adapter Framework (Navigation - Configuration Management->Infrastructure->Java System Properties); this should help you get Adapter Engine
3. The other 3 entries, Domain, Integration Server and RWB should come and usually comes always with automatic installation.
4. If you still do see after following above instructions, i suggest delete all of them both Technical specific & Exchange Infrastracture" related entries from SLD and then re-deploy RZ70, push 'Collect and Send data' option from 'SLD Data Supplier' from NWA.
ofcourse, you can always follow the instructions provided in the note that you were refering.
Regards
Sekhar -
Genius needs to help! problems with my video card and system
Hey guys! I'm going to post my specs first so that you get a good idea of what I'm running on:
MSI Neo2 LS 865PE.....MAT=Slow
Pentium4 2.4C.....FSB=233=2.8C hyperthreading enabled ~>1.55V
Corsair TwinX 1gig PC3700.....memory on "AUTO" in BIOS with timings at 3,4,4,8 ~> 2.7V
Radeon 9700NP.....stock speeds ~>1.7V
AlienX case with 2 fan400 watt power supply and 6 case fans
Zalman Alum/Copper heatsink fan
1:I've had this motherboard for a few months now. I upgraded my video card from a nVidia Ti4200(128meg) to a Radeon 9800 a month ago, but I couldn't get it working at 8X AGP, no matter what voltages I threw at it. I returned it for a Radeon 9700NP hoping that it would work, but it still won't.
I'm using BIOS 1.9 and since there is no option to select your AGP speed, I could only try using ATI's drivers. Once booted into Windows, there is a slider you can move to select you AGP speed. On my machine It says that It has performed some tests and has concluded that AGP 4x is the best for my system....but my system supports AGP 8X!
I've moved the slider over to 8x (which requires a reboot) at least 5 times with each card but the slider refuses to move past 4xAGP after the reboot.
2: My second problem: I had an old stick of KingMax PC3200 and decided to buy 3 more sticks. Unfortunatly, the 3 I bought did not match the one I had, so I only put 2 of the new sticks I bought into my system. Immediatly, My system would crash, lock up, files were corrupt, and I got PLENTY of blue screens of death with a long message containing: 0x0000007 with all these other numbers and "0"s. I did a search online and found out I had a hardware incompatibility problem. I never got this with my old stick of ram.
I returned the 3 sticks of Ram and replaced them with the Corsair. Put my new Radeon 9700 in, formatted my hard drive....and within 24 hours, my system locked up 3 times, rebooted itself 5 times, and gave me the same BSOD as mentioned above with the same long message.
I didn't change anything except for the memory and the video card. I've been wanting to overclock, (thats why i bought the faster memory ) but I'm not sure what to do at this point.
I have my FSB at 233 but I'm scared to go any higher because of previous system instability at stock speeds. My RAM was running on 400 and MAT=Turbo with the most relaxed timings at 3,4,4,8.
I've given myself hours of sleepless nights formatting when my system wouldnt boot into windows; overclocking....etc. I NEED HELP. PLEASE. PLEASE. Anything could work at this point.
I'm trying to get more info on how to run my system at a 5:4 ratio, also.
If anyone has problems like me or knows what could be the problem with my system, please reply to this post, it would help me a lot. I've been trying to fix these problems for a few months now so anything is greatly appreciated.Thanks a lot to you guys that responded. I brought my computer home this past holiday and I want to let you know where I stand as of now. I guess this thread is like my blog for my computer. I want to clear some things before my first post makes everyone confused.
1- I have only 2 sticks of memory in my system: the Corsair PC3700 TwinX 512x2
I returned the 3 KingMax I bought, and still keep my old stick just in case.
2- I am using the 400 watt power supply that came with the case. I read some reviews of the case and I know the reviewer did not have problems with the power supply. In my BIOS, there are some voltages it is weak on. Lets say: it it should be 5.00+, my power supply will be feeding it 4.96v or something like that, but I dont know, or think, that is a major problem...
3- My computer will refuse to boot if memory speeds are set at anything below 400. SO....if I want to use a 5:4 ratio and have to set my memory speeds to "333" in BIOS, my system refuses to boot.
4- This morning, I did manage to overclock my FSB to 250. Specs are as follow:
Memory Timing @3,4,4,8,4.....speed set at "AUTO".....MAT at "SLOW"
MY 2.4C's FSB was raised to 250 = 3.0gig
AGP/PCI frequency: 67.xx/3x.xx (cant go any lower)
CPU voltage: 1.5500
Memory voltage: 2.75
Video Card voltage: 1.7
Everything was fine for the whole day until I heard something click in my computer around midnight, and then seconds later, my computer froze and made a continuous beeeeeeeeeeeeeeeeeep. (you can imagine)
This "click" and system crash has been plaguing me for months now. I dont know whay it happens. I was just using AIM when I heard the click and my heart stopped.
My memory speeds have been set to "AUTO" even at the FSB of 250. But I don't know if this still means my system is at a 1:1 ratio. I know the BIOS then adjusts the memory to work at 500 if my FSB is 250...so I assume it is? I love 3gig, but somehow I feel that 2.8 is faster, since the FSB=233 running parallel to my memory, also at 233
A FSB of 250 is good enough for me, that's what I've been waiting 6 months for. If anyone knows how to set other ratios to achieve a FSB of 250+, please let me know, but as I said, my memory won't boot if its set at "333" -
Problem while creating WebAS ABAP Technical System in WAS 7
Hi All,
I have installed WAS 7 and EP 7 SP9 as part of SR2 Installation. I had checked the option configure local SLD. I have to create and SLD to conenct EP to ECC 6.
When I was creating the Technical System, at the last step i found out that ECC 6 was not available in the installed products(only ECC 5 was available). So i Upgraded CR Content to SAP_CR 3.2 and CIM to 1.5.20. When I am trying to create the Technical System again I do find ECC 6.0 in the Installed Products but there are no corresponding Installed Components for ECC 6.(The same exists for ECC 5). as a result I am not able to create the Technical System as atleast one component has to be selected. I have tried re importing the CIM Model and cr content again but its not working.
When I select SLD Data Supplier in Visual Admin I get the following error message.
Error While loading service SLD Data Supplier
java.lang.ClassNotFoundException: com.sap.sldserv.vaclient.ClientManagement
Is there any solution to this. Points will be given.
Regards,
Shyam.
Message was edited by:
Shyam R Nairhi,
use th following thread,
No products installed while adding a Technical ABAP System in the SLD.
Regards
Jayapriya -
Problem with 6233 birthday reminder: Technical pro...
The birthday reminder raises an alarm correctly on the date and time set. But once we exit the reminder it will again raises the past alarm daily once or twice, which is not at all desired. I think its a technical problem with nokia 6233 software. If not please anybody help me.
Thanks & Regards,
Sandeep KSorry for the double post, but here's something that just happened to me in the iMessage window:
-
Hi all,
When i go to the sld of my XI server and there inside technical landscape when i choose the technical system type as 'Exchange Infrastructure' number of application systems are displayed. I find tht there are application systems corressponding to Repository, Directory , RWB , IS and AE.
When are these entries getting added. I believe they are gettin created automatically but when. Is it at the time of installation.
Any kind of suggestion would be helpfulhi,
>>>>Is it at the time of installation.
AFAIK yes,
so don't need to maintain it manually later on
Regards,
michal -
SLD - Technical System Wizard - Select System: Only None (Standalone J2EE)
Hi, I want to connect to some RFC-Modules on a SAP/R3 System from my NetWeaver Web DynPro Application. Therefore I have to create JCO-Connections for the Models I created (MODELDATA_DEST and RFC_METADATA_DEST). For this I have to define the System I want these JCO-Connections to connect to in my SLD which I'm trying to do using the "Technical System Wizard". (SLD -> Technical Landscape -> New Technical System -> Web AS Java (because I'm developing a Java Application).
In the next screen I have to specifiy the location of my Server. I thought, that here, I have to define my SAP/R3 Server to which the JCO-Connections for my two models shall be connected. But the only option I can choose for "Web AS ABAP" (The ABAP System where my RFC-Modules are stored I guess) is "None (Standalone J2EE)".
Why is that? Or am I missing something? I thought I have to specify the SAP/R3 System containing the RFC-Modules here and not my local NetWeaver Server.
Thanks for your help
ThomasHi,
there seems to be a misunderstanding here. For JCO to work you need to set up the ABAP-System as a technical system in SLD, otherwise the Java-System is not able to determine information like Hostname and Portnumber for the RFC. Of course it's good to set up your WAS-Java in SLD as a technical system as well, but for the JCO the ABAP side is more important as far as I can see.
To have a clean start I suggest that you set up all involved technical systems in your SLD.
Regards,
Jörg
Maybe you are looking for
-
After updating to iOS 8.3, my iPhone 5 no longer can connect to cellular service
After updating my iPhone 5 this morning to iOS 8.3, I am no longer able to get service. Upon rebooting the phone, or removing and replacing the SIM, it connects for about 30 seconds, then drops the network connectivity and is constantly 'Searching...
-
My next step tomorrow will be OFCOM is this is not...
I would like to start out with, would you pay for somthing that you are not getting/promised when you sign up for BT? As of the point of composing this post i am sat in a local McDoanlds having to use the FREE WIFI Service to run my business as BT ha
-
Printing Paper Question--Are Creases OK?
I'm sorry because I'm sure I should ask this question in the forums of the Canon MX870 printer, because that's my device, but I really would like your opinions here. I like to recycle paper through my printer (old office paper and junk mail that stil
-
Siri stopped talking out loud. Text only. Anyone know what could have happened?
Siri stopped talking out loud on my iPad Mini. Anyone know why? Only thing I had done not long before I noticed this was use speakers.
-
FrameMaker 11 crashes at startup
It generates this error message: Faulting application name: FrameMaker.exe, version: 11.0.0.380, time stamp: 0x4ff4018dFaulting module name: GoMarkup.dll, version: 0.0.0.0, time stamp: 0x465e7643Exception code: 0x40000015Fault offset: 0x000aa100Fault