Problems installing 8i - TNSNames Listener error

I have just finished installing Oracle 8i (8.1.7) from CDs. I installed
both the enterprise ed. and client disks.
It failed on the step where it tried to create a database.
I'm getting the following error in my Windows NT Event Log:
The OracleOracleTNSListener service failed to start due to the following error:
Access is denied
It appears that there is a Listener, and Names Server configured on my machine
(I see them in Configuration Wizards.)
I'm sure it is a configuration issue, and don't know how to resolve it.
Fred Z.
[email protected]

user4306972 wrote:
Hi all,
I need help in installing 8i on win 2000 server.What should i do???????/
Hardware is Intel(R) Xeon(TM) cpu 3.40 GHz, RAM =2GB.
Is the above hardware is compitible with 8i installation
I would appreciate your valuable suggestions.
Regards,
Asma.
Edited by: user4306972 on Dec 9, 2009 1:02 AMI've already given you several suggestions: "surely you realize that Win 2000 server didn't even exist until long after 8i was fully *DE*-supported ..."
That means 8i was never certified on Win 2000. That means there's no guarantee that you can install it, or that it will work after installed.
But if you are determined to go down this totally uncertified, unsupported path, my only suggestion is to go back and read ... and heed ... all the points in the fine installation guide. Particularly the part about installing the loopback. Don't assume "I don't need that". Just do what the install guide says.

Similar Messages

Problem installing adobe creative desktop error 50

Having problem with installing the desktop creative
error 50

"Failed to install" | Creative Cloud Desktop : https://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html

Problem installing ipod mini hardware error msg

Installed software ok but when I connect ipod mini to USB 2.0 I get "Found new hardware wizard. There was a problem installing this hardware: apple ipod usb device. An error occurred during the installation of the device. One of the filter drivers installed for this device is invalid." If I click finish I get a pop up at bottom saying" A problem occurred during installation. Your new hardware might not work properly." Click out of that and my ipod and itunes works ok. How do I correct this nusance? Tried reloading 3 times now, same results. Brand new to ipod.

hey, i finally figured out how to do it! i had the same frustrating problem as you until just a moment ago : ) This is what you need to do:
1) Reset your iPod Mini by holding down on the Menu and the Select button until the Apple appears.
2) Plug it into your computer, windows and mac should be the same for that
3) Go into the iPod Updater and update the software : ) should work... if you need anything else, just ask or go to the following:
http://docs.info.apple.com/article.html?artnum=61771

Problems installing, pop-up saying error with configuring during intsalation?, problems installing, pop-up saying error with configuring during intsalation?

Im having problems installing itunes in my windows 7. popup stating that there was a problem configuring during instalation

I'm having this same issue since last week but I'm running Windows 7 32 bits, any suggestion?

Problem installing Circuit Design Suite - "Error while initializing resource loader"

I am attempting to install v 10.0.1 of the Circuit Design Suite (Education and Student Edition). Immediately after starting the install process I get the message "Error while initializing Resource Loader!" and the installer exits. My computer meets the minimum system requirements (512 MB RAM, 20 GB free hard drive space, Windows XP, etc).
Any suggestions for how to work around this problem so I can get Multisim installed?

Hi John,
I'm not sure if you still have issues with the Multisim installer. But just in case here are some comments:
Are you using a CD to install Multisim? If yes, try copying the installer to your hard drive.
Try installing Multisim on a different machine.
Apparently the Resource Loader is related to Java, try un-reinstalling it, upgrading to the latest release, etc.
Let us know how it works,
Fernando D.
National Instruments

Problem installing adobe x11 trial Error 1935

after downloading with adobe download assistant it gets about 90% through the installation then encounters a problem and undose everything and the green status bar goes back to the left. what can i do i really need to use this trial by morning. please help thanks

Are you on Windows Vista? I found an old document reagrding this error: http://helpx.adobe.com/acrobat/kb/error-1935-install-acrobat-reader.html. Could you run through the document and see if it helps to install.
I also checked the System Requirements, but I don't see support for Microsoft Vista. It just might work absolutely fine on Vista, but I would still suggest installing on a supported platform.

Problems Installing Updates from WSUS - Error Code 0x800f0826

Hi Everyone,
I have a WSUS server that I am using to dish out updates to the rest of my network. I am using PC's with Windows Vista SP1. Most of my PC's are installing updates fine with no problems - but there are a certain few that will not install any updates and return the error 0x800f0826.
All of the PC's are from the same image - so there is nothing different in the software setup that I am aware of.
I have been browing the net for ages, and have tried a few fixes - for example:
Starting Various Services and Setting to Automatic - No Luck
Renaming the SoftwareDistribution Folder - No Luck
Checked update history for failed updates and unassigned potential problem update - No Luck.
I am running out of ideas now - can anyone help?
Thanks
Matt

Install System Update Readiness Tool
Once you installed SUR Tool, run below commands
DISM.exe /Online /Cleanup-image /Scanhealth
DISM.exe /Online /Cleanup-image /Restorehealth
Downlod System Update Readiness Tool from below link
http://windows.microsoft.com/en-GB/windows7/What-is-the-System-Update-Readiness-Tool
Refer : http://www.thewindowsclub.com/checksur-system-update-readiness-tool
Refer below link for analyzing log and further troubleshoot :
http://www.sevenforums.com/tutorials/108805-system-update-readiness-tool-checksur-log-file-analyzis.html
Regards,
Manjunath Sullad

Problem installing updates - proxy setting error

Every time I try to install java 1.5 updates, I get an error message saying "Installation cannot proceed with current proxy settings". I have referred to the installation guide which tells me that if I can get to the web outside my firewall my proxy settings are OK. In addition, there is nothing checked in my proxy settings in IE. I went through diagnostics with my ISP and they couldn't find anything wrong. I have tried to contact Sun but have gotten no answer. Anybosy have any ideas?

I solved the problem. Apparently Norton Firewall automatically blocks java SDK downloads. For anbody getting the proxy setting message, check your firewall settings. It does seem like Sun could give a more accurate error message.
Mike

Problems installing Premiere CS6 - OpenGL error

Hello,
I'm having trouble setting up Premiere CS6 and would really appreaciate any help or advice!
I have just built a workstation to run CS6, however I have run into problems whereby CS6 will crash within the first few minutes of use. I'm not entirely sure what triggers it but just simple use like scrubbing or importing media will cause the crash. The error message I get is
'The NVIDIA Open GL driver detected a problem with the display driver and is unable to continue. ERROR CODE 3'
I have installed the latest updates for windows, CS6 and the graphics card but the problem still continues.
The video card is a Ge-Force GTX 580
Hope someone out there can help!
Thanks,
John

I was having the exact same issue (Vista, but different NVIDIA graphics card, and CS5), and I was able to fix it by adding a registry value.
Here the solution that worked for me:
1) open your vista registry editor (Start -> Run -> type "REGEDIT" w/o quotes)
2) go to the key : HKey_Local_Machine\System\CurrentControlSet\Control\GraphicsDrivers\
3) right click on the "GraphicsDrivers" key
4) Add DWORD "TdrDelay" w/o quotes
5) Set value of TdrDelay to 8
Restart Computer
Here's a link to the other forum where the solution was posted. Turnes out it has nothing to do with the drivers at all. It's a Windows thing. Another guy found that the problem was the TDR time limit (a value in one of the registry for the graphics card), which either does not exist (my case), or is not set high enough to render Premiere graphics properly.
http://www.sevenforums.com/crashes-debugging/51028-help-me-configure-registry-correctly-so lve-tdr-issue.html

"There was a problem installing Photoshop CC (2014)" error for a year

I've been trying to install Photoshop for over a year (haven't really needed it yet, and now I do), and get the same error every time.
It gets through about 45% of the download (always the same percentage, roughly), and then gives up and says "Installation failed--learn more."
When I click on the learn more link, I get a web page saying exactly:
<<
Exit Code: 34
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 0 error(s)
FATAL: Payload 'Camera Profiles Installer_8.3_AdobeCameraRawProfile8.0All 8.0.0.15 {3E2A282C-3E78-44F4-AB5F-021300B2CEE0}' information not found in Media_db.
>>
It's always this same error.
I've had this error since the pre-release, and I suspect it has to do with being part of the pre-release program. (We're an Adobe plug-in developer, a Silver Partner--been developing plugins since before InDesign 1.0 shipped.)
Yes, I've uninstalled the Creative Cloud and re-installed a couple of times, from scratch. I've also tried the Cleaner, which hasn't helped.
I'm now officially stumped.
Can someone from Adobe help fix this?

I do not work for Adobe... you need to contact Adobe... try the chat link I posted
>do this to 300 Macs
Are you using the enterprise installer?
Team Installer http://forums.adobe.com/thread/1363686?tstart=0
http://helpx.adobe.com/creative-cloud/packager.html
http://forums.adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent
And, some Mac links that may help
next link says After Effects, but check YOUR permissions !!!
-http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
-Mac 10.9.4 and OpenCL issue https://forums.adobe.com/thread/1514717
-Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
-more Mac 10.9.3 https://forums.adobe.com/thread/1491469
-and https://forums.adobe.com/thread/1507936

Problem Installing iPhone 2.0 (Error -5000)

When I try to install iPhone 2.0 through iTunes, I am getting this message during backup of the iPhone:
An error occurred while backing up this iPhone (-5000). Would you like to continue to update this iPhone without backup?
Continuing without backup will result in in the loss of all contents on this iPhone.
Any ideas on how to fix this?
Thanks

Deattach all your USB items
Don't use the iPhone dock
http://discussions.apple.com/thread.jspa?threadID=1599349&tstart=0

Error while starting tnsnames listener

Hi, We installed oracle 8.0.6 on Windows 2000 machine, while starting the tnsnames listener we are getting the following error,
" Could not start the OracleTNSListener80 service on local computer, The service did not report any error, this could be internal windows error or service internal error, contact your sys admin".
Does any one had similar kind of error ?. Please suggest.

Send Listener.ora file

Post instal Rapidwiz linux64 bit errors RW-50015 HTTP Listener

New Installation of R12.1.1 on Linux x86-64
using zip files from e-delivery
created staging dir successfully
Ran rapidwiz
selected new Installation and Express Installation
Rapidwiz worked and installed all files but it failed at the end during validation for post install
when showed screen for Validate System Config the post-install check:
I had error in HTTP (RW-50015: Error: - HTTP Listener is not responding)
details of error:
HTTP
checking URL = http://localhost.localdomain:8000
RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
some other facts,
I cannot run sqlplus, no access to database.
it seems environemt variables are not set as echo shows empty value.
since the HTTP RW-50015 error is known issue, i have tried several solutions, but no luck:
tried solution 1:
I was able to run APPSVIS_localhost.env
however i canNOT connect to sqlplus
therefore no access to database:
pwd
/d01/oracle/VIS/apps/apps_st/appl
[root@localhost appl]# chmod 777 APPSVIS_localhost.env
[root@localhost appl]# ./APPSVIS_localhost.env
[oracle@localhost appl]$ ./APPSVIS_localhost.env
[applmgr@localhost appl]$ ./APPSVIS_localhost.env
[applmgr@localhost appl]$ cd /d01/oracle/VIS/db/tech_st/11.1.0/bin
[applmgr@localhost bin]$ ./sqlplus
./sqlplus: error while loading shared libraries: /d01/oracle/VIS/db/tech_st/11.1.0/lib/libclntsh.so.11.1: cannot restore segment prot after reloc: Permission denied
[applmgr@localhost bin]$
when echo oracle env variables they are all empty:
for example:
[oracle@localhost scripts]$ echo $APPL_TOP
Then I tried commands $ADMIN_SCRIPTS_HOME/adstpall.sh apps/apps and restart with adstrtal.sh:
couldn't even use script v as I got error:
[oracle@localhost VIS_localhost]$ cd /d01/oracle/VIS/inst/apps/VIS_localhost/admin/scripts
[oracle@localhost scripts]$ ls adst*
adstpall.sh adstrtal.sh
[oracle@localhost scripts]$ ./adstpall.sh apps/apps
You are running adstpall.sh version 120.10
adstpall.sh: Database connection could not be established. Either the database is down or the APPS credentials supplied are wrong.
USAGE:      adstpall.sh <appsusername/appspassword>
adstpall.sh: exiting with status 1
also in another question in forum
RW-50015: Error: post R12 installation on Oracle EL 5 (X64)
it is asked to try this:
... commented out the following line:
#eval ohs_start -DSSL "$args"
... and replaced it with:
eval ohs_start "$args"
I have not tried this, i think my issue is with database and sql which cannot be accessed.
solution 2:
Tried workaround from Note 943443.1
but first i cannot see any file with # ls libdb*:
[root@localhost inst]# cd /usr/lib
[root@localhost lib]# ls libdb*
ls: cannot access libdb*: No such file or directory
after running the command from the Note:
[root@localhost lib]# pwd
/usr/lib
[root@localhost lib]# ln -s /usr/lib/libgdbm.so.2.0.0 /usr/lib/libdb.so.2
now, I can see libdb.so.2:
[root@localhost lib]# pwd
/usr/lib
[root@localhost lib]# ls libdb*
libdb.so.2
then click on Retry in the rapidwiz screen where it showed the error (Validate System Config)
but still fails with same error:
HTTP
checking URL = http://localhost.localdomain:8000
RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
solution 3:
tried to stop and restart services:
[oracle@localhost VIS_localhost]$ pwd
/d01/oracle/VIS/db/tech_st/11.1.0/appsutil/scripts/VIS_localhost
[oracle@localhost VIS_localhost]$ ls -ltr add*
-rwx------. 1 oracle oracle 2785 2009-12-02 17:37 addbctl.sh
-rwx------. 1 oracle oracle 4119 2009-12-02 17:37 addlnctl.sh
[oracle@localhost VIS_localhost]$ ./addbctl.sh stop
You are running addbctl.sh version 120.1
Shutting down database VIS ...
sqlplus: error while loading shared libraries: /d01/oracle/VIS/db/tech_st/11.1.0/lib/libclntsh.so.11.1: cannot restore segment prot after reloc: Permission denied
addbctl.sh: exiting with status 127
[oracle@localhost VIS_localhost]$ ./addbctl.sh stop
You are running addbctl.sh version 120.1
Shutting down database VIS ...
sqlplus: error while loading shared libraries: /d01/oracle/VIS/db/tech_st/11.1.0/lib/libclntsh.so.11.1: cannot restore segment prot after reloc: Permission denied
addbctl.sh: exiting with status 127
your help is highly appreciated
thank you!

Thank you
items 1, 2 and 3 are answers to your questions,
I think you pointed to an important section as i have feeling something is
wrong with this simple default choice of localhost.localdomain.
please also see #4 as it has new information (the rapidwiz error are fixed now
but i still don't have access to anything)
1-) file: /etc/hosts
i have 2 lines in this file
[oracle@localhost etc]$ pwd
/etc
[oracle@localhost etc]$ cat hosts
127.0.0.1 localhost.localdomain localhost
::1 localhost.localdomain localhost localhost6.localdomain6
[oracle@localhost etc]$
2-) file: /etc/sysconfig/network
i have 2 lines in this file:
[oracle@localhost sysconfig]$ pwd
/etc/sysconfig
[oracle@localhost sysconfig]$ cat network
NETWORKING=yes
HOSTNAME=localhost.localdomain
3-) per step 3- of note 761564.1 I deleted file (using root accout):
/etc/sysconfig/networking/profiles/default/network
(before deleting i made a backup network-bak, just in case):
[oracle@localhost default]$ pwd
/etc/sysconfig/networking/profiles/default
[oracle@localhost default]$ ls -ltr
total 16
-rw-r--r--. 3 root root 230 2009-11-29 19:12 ifcfg-eth0
-rw-r--r--. 2 root root 112 2009-12-02 16:42 hosts
-rw-r--r-- 1 root root 53 2009-12-03 21:31 resolv.conf
-rw-r--r-- 1 root root 31 2009-12-04 02:37 network-bak
[oracle@localhost default]$
4-)
I made so many changes to dir access permissions using chmod 777,
also i checked mark some of the apache entries in Linux > System > Admin > SE Linux Management.
after that i accidently clicked on the "Back" button (on the rapidwiz screen where it had
the errors),
then I clicked Next button ( which of course went to the same screen I had error on )
then I clicked on Retry button and it appeared it fixed errors.
Rapidwiz confirmed all sections are ok,
no errors anymore.
(Previously i always clicked on Retry button only, but this time, clicked on Back, then, Next button,
then Retry button).
I am not even sure changes i made fixed the errors or this is just a bug in rapidwiz,
but right now, I completed rapidwiz and all errors are fixed,
however I still don't have access to anything:
Started firefox and try to go to:
http://localhost.localdomain:8000/QA_HTML/AppsLogin
it says Unable to connect
(by the way do I have to download IE and try in there or should it work in Firefox as well ?)
I am unable to run sqlplus
I don't have anyvalue in the environment variables, they are still empty.
I also ran steps 2.2 and 2.3 from note 3877859.1 (using AutoConfig to manage System Config EBS R12):
2.2
[oracle@localhost /]$ sh /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/scripts/VIS_localhost/adautocfg.sh
AutoConfig completed with errors.
2.3
[oracle@localhost /]$ sh /d01/oracle/VIS/inst/apps/VIS_localhost/admin/scripts/adautocfg.sh
     Configuring IES_TOP.......COMPLETED
     Configuring CSD_TOP.......COMPLETED
     Configuring IGC_TOP.......COMPLETED
AutoConfig completed with errors.
still same problem, didn't change results.
Thank you for your help!

Problem installing realplayer for radio listening

Hi everyone. I'm trying to help my mum to listen to bbc radio programmes on her mac. I'm not an expert by any means, but have downloaded the realplayer system onto her computer. The download goes okay, and the logo appears on the computer menu, but once we have opened a radio programme for bbc radio 4 and try to commence listening, a window pops up saying that realplayer has to be downloaded first. I don't know what I am doing wrong. If anyone could explain a method of getting realplayer to work, or any other way to listen to radio programmes on the mac, my mum and I would be grateful. As I say, I am not an expert,so if any explanations could be in very simple terms, that would be great. Many thanks.
Mac Mac OS X (10.3.2)
Mac Mac OS X (10.3.2)

hi matt
Apologies for taking so long to reply - i am over at my mum's again for the first time since posting the original message. In answer to the queries in your message:
1) The version of the Mac is, in fact, 10.2. I have tried, as you suggest, to update via the appropriate tools on the Mac to a higher version but no success - the software update doesn't contain any options. Is t here any way forward on that?
2) The browser is Safari - I haven't as yet quit the browser (does that mean using another browser to open the internet to access the realplayer download tools?) and tried to instal realplayer, but will proceed to do that.
3) The realplayer logo is on the desktop under the name realplayer, but I have checked and it is not in the Applications folder. Is that an error, meaning that it won't work? How does one install it into the applications folder if that is necessary?
I hope this is clear enough. Any further advice/suggestions/help would be much appreciated on the problem of getting to listen to radio programmes vis the Mac.
benedict

I had a problem installing icloud on windows 8.1. What should I do? At the end of the installation process there is a error message.

I had a problem installing icloud on windows 8.1. At the end of the installation process there is a error message.What should I do?

I'm guessing that you have checked and complied with the system requirements?
System Requirements
Microsoft Windows 7 or 8
Microsoft Outlook 2007 or later or an up-to-date browser (for Mail, Contacts, Calendars)
Internet Explorer 9 or later, Firefox 22 or later, or Google Chrome 28 or later (for Bookmarks)
Broadband Internet access
Note: If you are upgrading from iCloud Control Panel 1.1 or earlier, you will need to sign out of iCloud Control Panel and uninstall it before downloading iCloud Control Panel 3.1

Problems installing 8i - TNSNames Listener error

Similar Messages

Maybe you are looking for