Problems printing to HL-3075CW [SOLVED]

I found this thread wherein mythus explained how he got his HL-3075CW working with CUPS. I have mine connected (wired) and I can connect to its webinterface. I have it configured in CUPS using the WL-3070 ppd mythus recommended. When I send a test page to the printer, the job is withheld with a state of "processing since DATE "Unable to locate printer BRN001BA9AE9A63."
I can see nothing obviously wrong with the printer in its own http interface. Any advice is welcomed.
Last edited by graysky (2012-12-16 16:32:24)

Excellent suggestion. Thank you. That solved the problem.
Recap for folks finding this thread on a search wanting to get the Brother HL-3075-CW to print under Arch Linux:
% sudo pacman -S cups foomatic-db foomatic-db-engine foomatic-db-nonfree foomatic-filters ghostscript
% wget http://www.brother.com/pub/bsc/linux/dlf/BR3070_2_GPL.ppd.gz
Unzip the driver, add the printer, point CUPS to that driver. Per David's suggestion, assign the lpd:// in CUPS to the ip address of the printer, not to the printer name.

Similar Messages

MY HP MF 1005 PRINTER IS NOT SUPPORTING IN MAVERICKS 10.9 IT GET PAUSED WHEN I PRINT A DOCUMENT PLA SOLVE MY PROBLEM .

MY HP MF 1005 PRINTER IS NOT SUPPORTING IN MAVERICKS 10.9 IT GET PAUSED WHEN I PRINT A DOCUMENT PLA SOLVE MY PROBLEM .

Hi Shiba,
I understand that your printer is not printing picures as expected. I know you stated that you had tried troubleshooting steps above. Where you able to take a look at this document? Are you printing from a mobile device or computer?
Hope this helps.
**If you find this helpful or want to say thanks make sure to click the white star under my name to give me Kudos. **

HP Photosmart C7280 All-in-one problem printing. Ink System Failure has failed unable to copy--

I'm having a problem printing on my HP Photosmart C7280 All-In-One. The following message is what came up on the printer screen: Ink System Failure has failed unable to copy, receive faxes or print. Refer to printer documentation Error O.cl9a0007.
Does anyone have any suggestions?
This question was solved.
View Solution.

Hey Spider! First off welcome to the forum.
I would recommend removing all the ink cartridges, unplugging the USB cable from the computer that connects to the printer, and then shutting the printer off completely by removing the power cord. Then restart your computer. Turn the printer back on but leave it disconnected from the computer. After it has finished its power on cycle go ahead and insert the ink cartridges back into the printer and be sure to seat them properly.
After you have all the cartridges back in the printer properly then connect it to the computer. See if this resolves the issue. If not post back with any findings.
Thanks,
SeanS
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Having problem printing to hp officejet pro 8500 since updated to yosemite. any help please?

I am having problem printing to Hp Officejet pro 8500 printer, it says it is in use. I never had any problem until Yosemite update. Any ideas please?

I had the same problem with a HP 4000 laser jet & SL, this is how I solved it
http://www.macworld.com/article/142631/2009/09/snowleopard_printing.html

Problems printing from Google Chrome browser using my HP Officejet 6500 E709n Series printer

Dear Sir or Madam:
I am using Microsoft Windows XP Home Edition Version 2002 Service Pack 3 desktop computer.
I have a HP Officejet 6500 E709n Series printer.
I am encountering some problems printing from my Google Chrome browser in my Outlook.com account because when I try to change some settings in the print dialog interface the printout comes out incorrectly.
Below are the 2 snapshots of the print dialog interface of Google Chrome browser before printing an email message from my Outlook.com account.
Are there any software updates to correct this problem?
Please reply back soon.
Thanks.
Sincerely,
Etow

Welcome to the forums Etow,
I saw your post about the issue you are having with printing from Google Chrome. Have you tried disabling your pop up blocker to see if that will help? Also see this guide about Printing with Chrome.
If the above does not help, try using Firefox or Internet Explorer to print.
Have a great Friday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Since the last update I have been unable to print from Firefox. No problem printing from Safari or any other program. I've seen a few responses to this problem but only to people running Windows. I'm on a Mac running v. 10.5.8

Since the last update I have been unable to print from Firefox. No problem printing from Safari or any other program. I've seen a few responses to this problem but only to people running Windows. I'm on a Mac running v. 10.5.8.

Also when I click on the link in my email to activate my account (in the hopes that a solve will be emailed to me) I get this message -
"Something is wrong
We could not activate your account. Please make sure that you have clicked the correct link in your email or typed in the correct address."
Same message if I cut and paste the link.

HT4356 I checked everything out and had no problem printing from IPAD/MINI using the HP Photosmart 6520 printer, but the next day, using same application, my HP did not show, but was looking for the AirPrint Printer, what am I doing wrong?

Using IPAD2, IPAD MINi, HP photosmartE6520 set up on wireless network. No problem printing from my devices, but the following day, it is looking for AirPrint printer, why?

Hello lenc48,
Welcome to the HP Forums.
I see that you are having a few issues when it comes to printing from your mac as well as some two sided printing issues.
I do have a some suggestions that we can try in the attempt to troubleshoot this issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Please remove the usb cable (if using wireless, disregard this step) from the printer and from the Mac and leave it disconnected until further notice.
Please click on the first link that will give you instructions on Uninstalling the Printer Software.
Once the software has been removed, please disable any anti virus protection that you may have on the Mac.
The next step we are going to take is downloading the HP Photosmart 6520 e-All-in-One Printer Full Feature Software and Drivers - OS X 10.9 Mavericks.
The installation will prompt you when to connect the usb cable (You will see a prompt for a wireless connection as well if that is the connection type you would like to use) so please do not connect the cable until prompted to do so.
If you are still having issues, feel free to write me back or you can contact HP Total care direct. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Problems printing a converted PDF which was converted to Word after completing the form

Problems printing a converted PDF which was converted to Word after completing the form. I have spent the last 3 hours trying to figure out what I am doing incorrectly. I can't get it to print in either the PDF or Word file. Please help, I need to complete this form and sent it NJ Department of Motor Vehicles Commission.

Hi, make sure you are using the latest release of PDF program.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Problem printing with laserjet 3055 AIO

We have 3 or 4 3055 AIOs within our school district, and one is giving us a real headache. It is constantly asking us to insert pages. When I went to look at it (I'm a tech at the district), the LCD read READY MANUAL and it was only pulling from the manual feed tray (tray 1). Manual feed is set to OFF, but it is still trying to pull from manual feed.
I was looking at the other 3055s that we have, and they all have the same settings, so I dont know what might be happening.. None of them show anything in their setups about tray 2, even though they all have a tray 2. I initially thought that the problem printer just couldn't see tray 2, but they all looked the same way.
My question is, does anyone know how I can set it back to READY AUTO, when manual feed is already OFF?

The Tray 1 (the top small tray) of LJ3055 is a priority input tray, meaning if there're papers in both trays, the printer will pull those in Tray 1 first.
The Tray 2 (the bottom one) is the main input tray. The printer will pull paper from Tray 2 when there's no paper in Tray 1.
The LCD message "Ready Manual/Auto" does not indicate the paper input tray, but indicate the receive fax answer mode. If you want to change it, please go to Menu -> Fax Setup -> Fax Recv. Setup-> Answer Mode.
If you feel this solves your problem, please press the "Solved" button.
I am an employee of HP, but I only speak for myself not for the company.

Problem printing Report Document Draft

Dear support,
our customer has problem printing its Document Draft Report, because
the "DRAFT DOCUMENT" string on the background of the page is too large.
The printer can manage this dimension and prints an empty second page
(also when the document has more pages).
See attached file.
If we disable the "Print Draft Watermark on Draft Document" flag in the
Print Preferences, the customer hasn't the problem printing the draft
document.
The customer need to distinguish the print of draft document.
Is it possible in the report designer to know if a document is a Draft or
a Definitive one?
If we can understand the type of the document, we could add a text box
"DRAFT DOCUMENT" in the report and disable the "Print Draft Watermark on
Draft Document" flag.
Can someone help us, please?
Regards,
Emanuele
TC Systems SA - Mendrisio - CH
Emanuele Croci
+41 (0)91 960 2525

hi Emanuele Croci,
For example paper format which default as Letter,but in PLD
if y'r paper format is A4 then definitely it will be printed more than 1 page.
Go to File --> Page Set Up --> Change paper format as in PLD.
Also reduce the font by 1 point.
If problem not get solved,You can print Water mark as DRAFT from printer properties.
Start --> Printer and Faxes > Select Printer you want to print,Right Click it>Select Properties>Select Printing Preferences>Select Effects Tab> Select Water mark option as Draft>Click Apply.
Test print it let me know.
Hope above solution will solve problem.
Jeyakanthan

I am having problems printing with my HP 800PS design jet.

I am have problems printing with my HP 800PS design jet. I have to call IT all the time and it is losing its print settings and the print screen will freeze uot all the time. I am told that HP does not support this product any more.

This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP Designjet forum here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Problem printer

Problem : printer hp laserjet 400 mfp m425 dn print "GET/ HTTP/1.0 " is first page. Thank you for answer

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
Click on New Post.
I hope this helps.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Problem printing Adobe Reader documents (PDF). Text files and MS-WORD print fine. Help?

I cannot get my ePrint to work with Adobe Acrobat (ReaderX) and pdf files. I get a "Failed to send" message. I have NO problems printing text or MS-WORD files so I know my Internet, printer, and local intranet are working. Help?

When you say the bottom right of you screen, are you talking about your computer screen? If you are then, you are not using ePrint, which is fine. You may just be having some wireless network issues. Try this. When it asks for the DNS information on step six, enter Google's public DNS (Preferred = 8.8.8.8 | Alt = 8.8.4.4). If that does not help, let me know and I will see what I can do.
By the way, if you are emailing the documents to your printer, which is ePrint, you are right about the file size limit, however, the limit is 5 MB. Most likely you are not Creating PDF or Docx documents that are anywhere near that size, so that should not be the issue if you are using ePrint. If you are using ePrint, try turning the router and printer off. Turn the router on and let it become stable. Turn the printer back on. Turn off and on any other devices that are connected to your wireless network as well, so they can re-establish network connection. Now retry the ePrint job. If that does not work, let me know.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

10.5.5 Update PROBLEM Printing to Xerox from inDesign

I just updated to 10.5.5 and I'm having problems printing from inDesign to a Xerox Phaser 7760. All print outs come out distorted (stretch horizontally) I called Adobe and the work around they gave me is when I hit print, under setup [Paper Size] must be set to "Defined by Driver" not the actual paper size you want to print. That now has to be set under the [Page Setup] tab. Very annoying and inexplicable.
The problem only occurs when I print to this specific printer from just inDesign. It doesn't happen with any other program or if I print to any other printers from inDesign.

CarTravel wrote:
That solved it. For others that are interested, you need to either go to another machine that has 10.5.4 or download that image file from somewhere and do the following.
command-shift-G in the Finder to enable you to open the hidden folder, paste /usr/libexec/cups/filter/ as the go-to line. The file your looking to replace with the old system is called pstops. I saved a backup of the 10.5.5 version before replacing it with the older 10.5.4 You will need to log in as root in order to do the replacement of the files.
I would suggest someone try a safer and easier solution. Try installing Ghostscript. You can get a Mac OS X installer for Ghostscript at _http://www.linuxfoundation.org/en/OpenPrinting/MacOSX/foomatic_. This will leave your hidden system files intact so you don't accidently break something.
I don't guarantee that this will work, but given the solution that Justin Lancaster posted about using Rosetta brought using Ghostscript to mind. What I think may be happening is that when using the Adobe applications under Rosetta, the applications are sending PDF or PICT with PostScript to the printing system. When running natively on Intel Macs, I believe the applications are sending PostScript to the printing system. I have seen this with Adobe Reader 8. Printing from Adobe Reader 8 on an Intel Mac sends PostScript to the printing system. If Ghostscript is present on your system, it will use Ghostscript rather than the Apple supplied pstops filter.
I hope someone will give Ghostscript a try and report back. I don't have any of the mentioned Adobe applications to test this on. Ghostscript does come with an uninstaller, so it can easily be removed if it doesn't solve the problem or the issue with Apple's pstops filter is resolved.
Matt

'Laserjet 1022n Windows Update' causing printing problems: print jobs don't stop printing

Hello,
a few days ago, I installed the Laserjet 1022n Windows Update on my Windows 7 64 bits and since then, I can't print a page normally: the page doesn't stop printing. I am using a network port with TCP/IP.
I made several trials to solve this problem:
- uninstall the printer driver and installing it again (I tried the last version on the HP site and an older one that worked perfectly before)
- update the firmware of the printer to the last version on the HP site.
When I pause the printer and start the print job, you see it arriving in the list. Resuming the printer, the print starts on the printer but you see that the job stays in the list, flashing again and again. The printer keeps printing the same page.
I don't know what I can do to solve this problem. There is no mean of uninstalling the HP Laserjet 1022n software update because it doesn't appear in the list of installed programs (well on the list of the done updates by the way op windows updates).
I have the same problem printing on the same printer from another Windows 7 PC (with the same windows update done)
But I have no problem printing with my laptop on another network printers.
Is there someone having the same problem and how to solve it ?
Thanks for answering
This question was solved.
View Solution.

I found the solution on this site : http://www.tomshardware.co.uk/forum/59912-29-1022n-printer-stop-printing
You just have to uncheck the chekbox "Enable two-way communication" on the "Ports" tab of the printer properties and it works normally again !!!!

Problems printing to HL-3075CW [SOLVED]

Similar Messages

Maybe you are looking for