Production Order (Control Key)

Hi All,
Scenario: At present after the MRP run, a planned order is created for materials which are to be manufactured in-house & it is then converted to a production order. A control key is being automatically selected for the operation. I would like to know from where is this control key being selected. The material does not have a routing. Is there any configuration settings i need to change, as the control key which is being automatically selected at present is not the correct one, i would like to select another control key & make it default for this material. Await for inputs
Vivek

Hi again,
  If i create a routing in the development server, how do i then make the transport to the qualification server. I know SE10 is used for transport requests, but i do not know wat steps i need to take before i make the request using SE10, can you give your inputs for this?
Vivek

Similar Messages

  • Production order control data tab

    Hi,
    Is there any chance the costing data under control data tab in production order can make out "grayed" so that users can not change costing sheet, RA key.
    Thanks in advance.

    Dear Sprint,
    Try with SHD0, make the field as display only
    [http://wiki.sdn.sap.com/wiki/display/Snippets/TransactionVariant-AStepbyStepGuidefor+Creation]
    [http://sapfunctional.com/General/ScreenVariants/Index.htm]
    [http://help.sap.com/saphelp_nw04/helpdata/en/7d/f639fb015111d396480000e82de14a/content.htm]
    If possible take help from technical person
    Regards
    Madhu

  • Monthly Production Order controlled by week

    Hello,
    How can I have in a single Production Order created for a month and have full control over BOM components by week?
    We have a cockpit were the user only as to input the quantities that has been produced, for that monthly Order, but the client only wants the cockpit to shown the quantities that he is suppose to produce on that particular week. Is there a way to do this, can I've in the same order the quantities that I'm suppose to use per week, or do they have to create weekly Production Orders instead of monthly orders?
    Thanks,
    BMO.

    Dear Bruno,
    If you are having monthly requirement after taking MRP run you will be getting one planned order and convert this planned
    order's partially (may be 3 or 4 ) into production order's through T Code CO48 as per your requirement and release the same
    and perform GI and confirmation and GR.
    Check and revert back.
    Regards
    Mangalraj.S

  • Production Order Control

    Hi ,
    In Production order the User name can be selected from header of the table.
    We did a SP_transaction notification like only manager can do some exceptions which other users can buy pointing to UserSign of Owor. it worked fine.
    Problem is, now the other users found the breach, like changing the user name to Manager and doing those exceptions. unable to control this, do any one have new idea to overcome this?
    I thought i wud be better in case if we cud catch the current loggin user n check with those exception conditions, so tht only in manager loggin can do those things.
    i dont know how to get the thing done... plz help!!
    Thanks

    Restrict user name visibilty of production order thru form settings.
    De tick User Name.
    and also apply authorization General ---> Document Settings ---> No authorization

  • Availability Check during Production Order (controlling side) change

    Dear Gurus,
    we run our COMAC run over all production order, but due the fact some controlling user is performing at the same time some settlement activity the job scheduled goes in DUMP and block all the chain of ATP scheduled for all Work Center, instead of provide an easy message log that advice the order processed bt the user has not taken into account?
    there is something that is wrongly set up?
    Regards.
    Gianluca

    Dear,
    It depends on when your background job started..if the background job is started before CO settlement, then system will give error in settlement. If the ATP checking background job has started after CO people started settlement, then you will have this problem.
    Hence to resolve the problem two possible solutions.
    1. You send a message through basis that Production order job will be starting from this time to this time and hence dodnot run settlement...hence system will give the message to all users.
    2. Schedule the activity in the night when no one uses the system.
    Pl come back if required.

  • Production Orders Controls by Work Center

    Hi PP Gurus!
    We have to check the production orders by work center. Can we do it? If yes, could you inform us which conditions are necessary to do it?
    Our release is 4.6C and we are using PP-Manufacture discrete.
    I would like to thank you for help us with this issue...
    Best Regards,
    Valdevair

    Hi Krishna,
    Thanks for your reply...
    We've executed the transaction according your suggestion, but the values for this column are in Blank in the report.
    Is there any specific condition for the SAP shows us?
    We are using transaction CO11n to register the hours per operation.
    Once more...thanks a lot.
    BR
    Valdevair

  • Batch record for production order control

    Hi Experts
    I have a problem, 
    For an production order the system has created the Inspection lot.
    Now  I want take the usage decision   but the system inform me that before in it is necessary u201CCreate and approve batch record firstu201D.
    How  can I solved this problem? The order isnu2019t the process order. 
    Best regards
    Ezio Calvi

    Dear
    You are getting this error becasue you can only carry out the following functions for the batch you have selected when an approved batch record exists (see material master record, Work scheduling view ):
    Making a usage decision for an inspection lot of origin Goods receipt from production
    Changing the batch status from Restricted to Unrestricted
    However, no batch record has been created for the batch you have selected. Therefore, the system does not carry out the function.
    So you need to create and approve the batch record.
    Refer SAP Library, section Basis Services / Communication Interfaces -> SAP ArchiveLink -> SAP ArchiveLink - Scenarios in Applications -> Storage Scenarios PP -> Optical Archiving of Batch Records
    Or Else , check this thread which may help you to trace the problem
    Re:Create and approve batch record first
    Regards
    JH

  • Production order control form

    Hi,
    can anybody guide me in developing a smartform from scratch.

    Hi Ram,
    In SMARTFORMS transaction if you serach by SF_* it will list 3 smart forms; just follow these. It will help you best.
    Regards
    krishnendu

  • Production order having no planned values

    We are in Make to order scenario.  The production order for the parent material is created with reference to a Sales Order.  While costing the production order for the parent, total planned price is displayed as zero.  we have maintained price control std price for all configurable materials(parent & child) with zero price being configurable materials.
    We dont understand why the production order is having no price. BOM, routing, etc. are in place. What are the possible reasons as to why costing is having no value for the production order ?

    Dear Nikkitha,
    Normally, the planned prices for the Production order are displayed as per the costing variant that apperas in the Production Order control tab (passes down from the order type). This has no relation with the sales order cost estimate which is used for Target price calculations.
    Also, you can check when the Planned Prices of the Production order are calculated in the Transaction (OKZ3) for the order type.
    Kind Regards
    Umapathi G

  • Service WO through IW31 (Control Key-PM03)- PR gets work flow error

    Hello All,
    When we create a Service Work order (Control Key "PM03") through the operations tab in a Work Order(IW31), When we open the PR we recieve an error:
    "Entry missing in table for Fund Center SP/"
    The work flow recieves an error message and an email will not be sent out to be approved.
    Any suggestions on to fix this.
    Thanks...

    Thanks Pete,
    Here is the error when we open the PR in ME53n or ME54n: "Entry missing in table for Fund Center SP"
    We checked our work flow table and the SP fund center is correct.
    When we create a service pr through me51n we do not get this error. Only when we create a service PR through IW31 (Control Key- PM03).
    THanks.

  • Procurement Key 'F' - System will allow to create production order

    Dear All,
    Pls help solve below issue
    Sub-assembly (HALB) material type with Procurement Key is 'F' - but System will allow to create production order, our management don't want to allow this. how to activate the error messges
    I checked the system messages CO 046, 047, 048 - it will not help for these messages
    Any way to control this (except user exit, badi)
    Regards,
    Sankaran

    Hi Sankaran,
       What I infer from your statement is that user is able to convert planned order into Production Order (MD04 or CO040). You want to issue a warning message during this converion.
      You can configure warning messages through OPJB.
       Whether this material with procurement type F was setup initially with a different setup? Please check whether any routing details exist for this material and also check whether there is any special procurement indicator. One more check is with your MRP Group settings.
    Hope this helps.
    With Best Regards,
    Srinivas

  • Varience Key in production order

    Dear All,
    There is varience key field in the control data tab of production order header. Please let me know where to define in customization the default value for this field.
    I am putting it manually in each order currently.
    Thanking you in advance.
    Sumeet

    Dear Csaba,
    Thanks for your reply.
    I have set the varience key in plant through OKVW. I haven;t got what entries  to be made in OMV1. Whn I created the order, the varience key was not coming automatically.
    Please guide.
    Sumeet

  • Variance key default in production order

    how do i set up my production order in such a way that when i create the order, it automatically proposes the variance key in the control data tab?

    Hi,
    Assign the variance Key at Costing view of Material master (MM01).Then  it will copied to production order.
    Pradeep

  • Purchase order  does not contain a confirmation control key

    Hi expert
    I have not set any confirmation control key in Purchasare order, still at the Migo, system is showing error  at depot.
    I have check the same thing with manufacturing plant, system dont show me any error.
    Regard
    Nabil

    Hi,
    I f the confirmation control key is maintained in PUR.info record is automatically will fetch into PO though you have not selected manually in PO. The CC maintained in vendor master or PIR can copy into PO. In your case please see whether inbound delivery is needed to perform GR? CC implies many types of confirmations like order acknowledgement, advanced shipping notification or confirmation of delivery dates. Please see specifically to the error. Try to know the type confirmation system needs to post GR. Thanking you.

  • MIGO error 'Purchase Order does not contain a confirmation control key'

    Hi,
    while posting GR to a PO i am getting an error ' Purchase order XXXXXXXXX does not contain a confirmation control key'
    it is true that i have not defined any confirmation control key in PO, Aknowled rerd checkbox is also not ticked
    Still why this message coming, what setting would be bringing this message
    Please clarity

    Hi,
    Until the installation of Note 589422 (with SP SAPKH46C43) you could  due to a program error - create a delivery even though the purchase order did not contain any confirmation control key.                                                                               
    This is now prevented through error message M7394. The transfer of this check (Confirmation control key existing in the purchase order, see Note 589422) was necessary as otherwise you could post a purchase order as desired. (Refer to also Note 616944 -> SAPKH46C44)
    589422 Several inbound deliveries can be created with MIGO :                                                                               
    "Implement the program correction.                                       
    With Transaction SE91 create message M7394 with the message text:        
    Purchase order & & does not contain a confirmation control key".         
    After you implemented this correction, when you want to create an        
    inbound delivery with Transaction MB01 or MIGO or with                   
    BAPI_GOODSMVT_CREATE and if the purchase order does not contain a        
    confirmation control key the system displays error message M7394         
    "Purchase order & & does not contain a confirmation control key".                                                                               
    Hope this can explain the error you met.
    Regards,
    Mauro

Maybe you are looking for