Program to clear (delete) budget for single year

Hi,
I need to delete wbs' budget for a single year .
I implemented Sap note Note 1145955 (Orders, WBS elements: Deleting budget, resetting status) and run program ZDELPRBU to delete the budget, but the program clears the budget of every year. The only selections are: project, wbe, and budget profile.
How can I delete the budget for year 2010 (or another one)?
Is there an alternative program which let choose the year?
Thanks
Edited by: Stifler on Sep 7, 2010 6:00 PM

Hi There
I have done this on Cost centres quite a while back. What I did was create a plan version and input 1.00 in it. I then copied the 1.00 version to the one I wanted to delete with 'overwrite' options ticked.
This may help you.
Kind regards
Dawn

Similar Messages

Budget control - Assigned funds are less than payment budget for fiscal year in document item

Dear Experts,
We are using Former budgeting, when ever we run the transaction FMBV getting the following message to a particular user.
Budgeting
Assigned funds are xxxx BHD less than payment budget for fiscal year
2014 in document item XXXX /XXXXX .
And also when purchasing creates the PO getting similar message to a particular user.
Purchase order 450000XXXX
Assigned funds are XXXX BHD less than the commitment budget for
fiscal year 2014 in document item 010 XXXX /XXXXX .
How to know where these users were maintained.
Thanks for the help

Hello Itai,
Sorry for my late reply. Have you been able to find a solution for this?
If not, please update, otherwise please make this thread as answered.
Sorry for the delay...
Kind regards, Mar.

Close budget for previous years

Hi,
The system Iu2019m working on has commitments management active, so when I create a purchase requisition or purchase order, the budget is affected. Iu2019ve noticed that the field that determines the year relevant for budget availability is the delivery date (EEIND).
So if I make a purchase requisition today, with a delivery date of 2007, for instance, it will affect the budget from 2007 year. I donu2019t want this to happen. Is there any way to u201Ccloseu201D the year budget and donu2019t allow any more values to affect the budget for previous years?
Thanks for any help.

Hello,
Please check the budget profile.
In budget profile, you will have how many previous years or future years you can budgeted. Try to reduce one year for previous years.
Regards,
Ravi

Standard/Custom program to set deletion flag for Purchase Requistions

Hi all,
If any of you know the Standard/Custom program to set deletion flag for purchase requistions, please let me know. It would be of great help.
Thanks in advance,
Karthik

Hello
Bapi BAPI_REQUISITION_DELETE will help you.

Can standard program RMCBIN00 calculate cycle count for 2 years?

Hi Experts,
Can any one clarify my doubt.
The calculation of cycle counting period to be two (2) years rather than the one (1) year that standard SAP uses. The cycle count indicators that determine the frequency of the counts for each material need to be used in conjunction with the 2 year cycle. Is standard RMCBIN00 calculate for Two year cycle count??
Moderator message: not directly related to ABAP development, please have a look in the respective functional forum.
Edited by: Thomas Zloch on Apr 5, 2011 4:14 PM

Hello,
You can do cycle counting with Rf transaction LM59 for the serialised material.
1.My experience says when you have HUM activated then to track material HU & serialisation profile works together.
2.You can do cycle counting of serailised & non serialsed material through Rf gun but clearance of this material will be issue. You may have to create one more transaction to clear the difference of serialised materials like LI20
Hope this input helps.
Regards,
Prashant

Budgeting for financial year-

Dear Expert,
Our client make budget for every finacial year. How do I map in SAP-FI? Anybody is having documents?
Regds,
PK
Moderator: Budget is managed either in PSM-FM or via planning module in CO (with no availablity control)

Hi,
Good evening and greetings,
If you are using Investment Management then it can be controlled using the Investment Measure...IM is the best module to control the CAPEX requirement.
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan

I installed creative cloud on my computer but now my computer has crashed and i have to buy another one. How do I install the programs again? I paid for one year grtz Emily

My computer has crashed and i have to buy a new one, how do i put my creative cloud on my new laptop? I paid for a year of having the programs

Please do not worry. You can just download it from Creative Cloud Help | Install, update, or uninstall apps.
You have to activate it with your Adobe ID.
In case the CC has been activated two time, you will have to use the option to deactivate the CC from previous install .This prompt will appear when you will try to activate the CC. Once you choose this option it will allow you to activate the CC on the new machine.
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
Regards
Rajshree

Previous years plan data for single year.

I have 7 plan data for each year. For example for 2017 I have following ..
what is planned for 2017 in 2011.
what is planned for 2017 in 2012
what is planned for 2017 in 2013.
what is planned for 2017 in 2014.
what is planned for 2017 in 2015.
what is planned for 2017 in 2016.
what is planned for 2017 in 2017.
Client wants to store all the previous years plan relating to each year.
I already have various category for plan such as plan1, plan2, revised plan etc.
How to handle the above scenario for 7 years plan data. Appreciate any inputs..

Categories named against planned year can be created. A working category(PLAN) is used in all reports and input templates. whenever PLAN data is finalized PLAN can be copied to respective planned years category . ie in 2012 , when planned data is finalized, PLAN is copied to PLAN2012 .In 2013 , PLAN should be copied to PLAN2013.
That way , planned amounts of 2017 can be retrieved from respective planned year categories .
Planned amount of 2017 in 2012 is cat:PLAN2012,Time:2017.total
Planned amount of 2017 in 2014 is cat:PLAN2014,Time:2017.total
Hope this helps.

Item 000 RN1D25 /4105140000 / commitment budget for year 2011 exceeded (

Dear All,
Iam using FR32 for Budget Uploading in ( Funds Management ) at the time of uploading it is giving like this message
Item 000 RN1D25 /4105140000 / commitment budget for year 2011 exceeded
In document item 000 RN1D25 /4105140000 /, commitment budget for fiscal year 2011was exceeded by 1,650.00 INR.
Pls give me the solution as soon as possible.
Thanks & Regards
Vijay

Dear Mr/Ms,
Thank you very much, i have cleared the issue.
Vijay

Budget effected for current year for changing a PO of last year

Dear Controlling firends,
I am a MM guy and facing the titled difficulty. The problem is ,suppose a Po had been created in last fiscal year and at that time budget for last year has been consumed as committed. But now when I am changing that particular PO ,even trying to reduce the PO Value than the original one ,it is observed that the revised value is being again showing as committed from this year, current budget. That means the system is treating this change in amount as a new PO of the current year. My FICO collegue is not able to figure out what is the wrong in such behaviour .
Will some one look into it aand find the solution as it is badly required to be solved without which everything is being messed up.
Anticipating immediate response from expert CO SDNers.
Dhruba

Are you on 11.1.1.x or 11.1.2.x?
If in 11.1.1.x then you can add asymmetric columns,
if you are on 11.1.2.x version then you can "add column" with specific members from dimensions, here is little more info:
Setting Row and Column Layout
Cheers..!!!
Rahul S.

Error while mantain budget for project

Hi,
I maintained budget for project CJ30 in IDES as follows:
1. Sellect all Item --> copy view --> choose planned total
2. Entry: Percentage = 100%, Overwrite option
2. All values is copied from Column Planned Total to column Budget
3. Save
4. Error message:
Item WBS element A-60000 budget exceeded
Message no. BP604
Diagnosis
In document item WBS element A-60000, budget for fiscal year 2008 was exceeded by 2.763,26 EUR.
can anybody help me to solve the problem?
Thank you
Long

Hai Long,
For getting BCWS , you should maintain Progress version. DO following in config settings..
1) Project Sys -
Progress -
Progress analysis -
Maintain Progress version.
2) Select Progress version 100 and copy the same and give new name.
3) Go to details.
4) Select option 3 ( if basis for Progress is Budget) 4 ( If it is planned cost) for Earned Value Basis.
5) Select option 2 ( if basis for Progress is Budget) 7 ( If it is planned cost) for POC weighting.
6) Save it.
7) In your project select Progress tab in detail screen of WBSE and Activity and select above Progress version, select select cost propotional ( Or as suitable for ur requirement) plan and actual ( it is adviseable to have plan and actual same always to have clarity in results)
8) Schedule and see report in CN41N.
Please post your observations
Thanks
Saikishore Ganga.

Budget for orders

Hi,
while creating the budget for overall plan for 2007, 2008 yrs, we are getting the error message that In document item Order 15555, budget for fiscal year 2006 was exceeded by 50000 INR
That amount is the actual postings in the 2006 year for that order.
how we can rectify the error message.
Regards,
Suresh.

Hi,
Even though i am getting the same error message for that order.
And one more i am not able get the Budget profile field in the active mode for the process orders and maintenace order to assign the budget profile.
Actually i need to give a buget of funds for the stores and consumption and repair and maintenace expences to get the control on those expences while raising the purchase requisitions. But these orders are catageoried under maintenance order.
Whether the Budget of the funds are staisfying the customer need or not? if not what way i have to approch.
Pl. help me.
Regards,
Suresh.

Deleting/clearing chat history for one single cont...

I want to delete/clear chat history for one single contact!
I want to see this option with the next update! I also do not want the complicated 3rd party solutions!
What's the reason of not providing this easy thing for so many years?
You are not the one! I'll switch to Viber, if you insist on this!!!
The real pain is having no clever solutions for the paid-service you own.

Weird, so after clearing the cache a url using ajax
like this works
http://www.abc.com/?a=b
and this does not
http://www.abc.com/
Unfortunately, since each application running its own server will handle pages differently and have backend scripts that process the requests, there is not a whole lot we can do in the browser but clear the cache. It would require resources beyond this forum. If however, you can get in contact with the developer of that application and ask if this is expected, we would be happy to work with an example.
Please let us know how you would like to move forward with the investigation.Or if you would like to investigate further you can try the fake item in this add on to view the HTTP header in more detail (plain text as well): [https://addons.mozilla.org/en-US/firefox/addon/http-resource-test/]
Please let us know if this helps.

How to carry forward budget next year for single wbs element

Hi,
i want to carry forward budget next year for single wbs element.
pl suggest me.
Thanks & Regards
Purna.M

Hi,
Go to CJCO click on Dynamic Selection and in master data of WBS element select No of person responsible and give the person responsible and execute.before that maintain no of person responsible in that specific WBS element.
hope it will solve ur problem.
Regards
Avinash

Accommodate structure changes in Budget Application for each year

every year our cost center structure changes to accomplish that we are creating New Budget Application every year . Cost center structure is divided in to Area then region and then csc. These Regions never stays under same Area they change it every year
can anyone suggest out a way to do it in only one Budget Application instead of creating new Application every year ?
How can we Accommodate structure changes in Budget Application for each year?
thanks in advance for the suggestions

Assuming the cost centers stay the same, and only the hierarchy of the dimension changes, it's really quite simple.
Export the level 0 data, clear the database, update outline, import the level 0 export file, agg database. You should now have the new totals.
All of this can be done in place without the export/import of data as well, but it is a good practice to export/clear db/import the data for defrag purposes.
Some things to consider, if the organization will want to compare year over year company totals...
1. They need to create some governance around newly inactive cost centers, usually you create some sort of "Inactive" parent in the dimension and when they are no longer active they need to be reassigned to this "inactive" parent. This will ensure that at least the company total stays the same.
2. Following #1, they need to understand that the year over year totals will may only be accurate at Company total (including the Inactive rollup) and at cost center.
Robert

Program to clear (delete) budget for single year

Similar Messages

Maybe you are looking for