Project Server 2013 - Project Site Provisioning Settings - Do not create a site

Hi,
The Project Site Provisioning Setting "Do not create a site" prevents a site from being created when a project is published. This works, but it still prompts the user with a dialog each time a project is published. In 2007 and 2010, the only
way to prevent this dialog was to deny Manage SharePoint Foundation. In 2010, denying this permission does not have the same effect. Is there any way to keep this dialog from being displayed?
Thanks,
Erik
Erik RHS

Hi Erik,
As far as I know, if you deny the "Manage SharePoint Foundation" permission with Project Server
2010, it does remove the dialog box (see this excellent
blog post). Note that you'll get warning messages in the Queue with Job State - 'Failed but
blocking correlation'.
I remember that Paul Mather, a fellow MVP, created
a macro with custom publish button (the macro suppressed the dialog box).
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Similar Messages

Exchange Server 2013 Toolbox MMC Error ConsoleInitialize.ps1 not recognised

Hello, after installing and configuring Exchange 2013 during a migration from 2010 (with both versions still running), I am now receiving a ConsoleInitialize.ps1 System.Management.Automation.RemoteException exception when trying to run the Management Toolbox
(I am really after the Queue Viewer).
This is the same when trying to connect locally on the server and remotely on a client computer with Management Tools installed - I can use EMC without any errors locally or remotely.
I have tried various fixes found around the net, including:
Changing the Identity of the Classic and DefaultAppPools in IIS and resetting - from LocalSystem to ApplicationPoolIdentity
Adding the roles to Exchange Organisation Management in AD
Disabling SSL on the Powershell virtual Directory and setting auth to anonymous
I have not tried recreating the Powershell virtual directory as mentioned on a few sites, as I have not been able to test that in the lab, and I am not sure how it affects the powershell session that I am doing it from.
The only thing that I can think that could be an issue is that Ex2010 is still up and running, could it be that Management Tools is looking at the old server, instead of the new?
Can anyone point me in the right direction with this one?
I can post more info if required.
Thank you.
Xpost here: http://serverfault.com/questions/666054/exchange-server-2013-toolbox-mmc-error-consoleinitialize-ps1-not-recognised

Hi,
If the EMS and EMC work properly, I think the powershell cannot be the problem. Is it possible to build up a new Exchange 2013 Server in test environment and make a replacement of
the ConsoleInitialize.ps1 file?
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

I cannot update my ipad2 to ios5. Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server. Tried resetting network settings, still not connecting. Tried updating iTunes, still not connecting.

I cannot update my ipad2 to ios5. Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server. Tried resetting network settings, still not connecting. Tried updating iTunes, still not connecting.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

Project with profit center was not created for entire period

Hi everybody,
I need a help with a problem here.
The alert mesage "project with profit center was not created for entire period" was displayed.
Then I searched for the creation dates and the profit center was created before the project gets its firsts postings. Therefore, some line itens don't exist in profit center (ledgers).
My two questions:
The first one, is it possible to input line itens in a retroactive way?
Everytime I need to use the project master data this alert is displayed. How can I fix avoid this message?
Thanks,

Hi,
Regarding your issue, it is theoretically possible to reverse all settlements up to the start of the project and then to settle again it
is a must to check in standard if the profit center is valid from the project start date onwards.
Check the attached note 1048945.
The system generates error message KM700 ('Profit center <PRCTR> does not exist for <date>') when you enter a profit center on a project definition if the profit center is not valid in the entire period between the basic start and the basic finish date of the project definition . However, only one warning message should only be generated in this case.
regards
Waman

After Migrating to project server 2013 some of my Mpp are not opening in project professional

After migrating to project server 2013 from 2010. my some of mpp are not opening in project professional.
project professional taking some time and then showing checkin error. There are no logs on project server to this issue.
but you can see these project in project server 2013 without issue. I have also tried the EditLink function. but result is same project professional not able to open. Check in error.

Hello,
Can you try this:
Open one of those Projects in PWA to edit in the browser
make a slight change (new dummy task etc.)
Save and Publish from the web
Close and check in from the web
Wait for the jobs to complete
Open project professional
try and open the same project again from there
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Exchange Server 2013 to 2010 mailbox proxy is not working

I have exchange server 2013 and exchange server 2010 in co-exist. I have 3 cas server and 3 mbx server 2013 on windows server 2012 standard, 2 hub/cas server and 2 mbx server 2010 on windows server 2008 r2. when I try to access owa of exchange server 2010
mailbox using exchange 2013 url, I am getting the error as "something went wrong. sorry, we can't get that information right now, please try again later. If the problem continues please contact your helpdesk"
Vishal C. Kalal | MCITP: Exchange 2010-2007 | Windows Server 2008

Hi,
To narrow down the cause, I recommend the following troubleshooting:
Check if the issue happens on all users.
Try to directly login OWA 2010 and check if it works well.
Check the IIS log on CAS 2013 server and find the error related to OWA.
Thanks,
Angela Shi
TechNet Community Support

Project Server 2013 restore site from content database

My Project server was moved from one domain to other so i had to recreate everything since distributed cache was nt happy. I recreated everything. Now i have contet database from porject server that i need to restore to brand new environment. How to do that?
Simply doing rmount content database is not working? How to reprovision it in Project server service application?
Adit

You mention that you mounted the content database. Did you do this with PowerShell? Have you tried adding the content databases, using the menus under Application management?
If that fails, I would just rebuild by doing the following. There probably is an easier way to do this, but here is what I would do
1) Delete the web application used for Project server
2) Create a new web application and point to the content database.
3) Then you can provision project server
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries

Project server 2013----new custom field value is not synced between my work assignment view and project professional

Hi All,
I would like to add a new custom enterprise field in project server to caculate the effective work. I hope it can work as the default field "work" and "overtime work". And I add my custome enterprise field to my work assignment and the
related details view. User can update the values in "my task" but after PM accept the updates, these values are not synced to the project center as well as project professional. Any idea?
Regards,
Anna

Yes, I am saying that the PM cannot see the updated values in the enterprise project in Microsoft Project 2013. It is a task custom field. No errors for it. Would you please help create a task custom field on your side to see whether you can reproduce
this issue? After creating the field, please add it to the "My task" related views so that project members can update the value for the task when they update the task information under "my tasK" page. After that, open the project plan as
project manager to see whether you get the updated value. Thanks a lot!
Regards,
Anna

Project server 2013 - PWA: My Tasks page is not loading and disabled

Hi
i had an issue that suddenly occur for one of my users (just to him).
My Tasks page is not loading, it shows "Loading" in the middle of the page and stuck that way, and also the Ribbon buttons are disabled.
Anyone knows what could he had done to make this happen?
The print screen is in Hebrew but i described what appears.
Ofir Marco , MCTS P.Z. Projects

Hi Ofir,
I've had a similar issue in a previous version of Project Server. A corrupted assignment was causing this in my case. I found the corrupted assignment using the following procedure:
Retrieve all published assignments & related projects for the user (in the database)
Open each project one by one in MS Project & set the 'Publish' value to 'No' for the user's assignments and publish the project
Everytime after publishing a project, retry to open the Tasks page
At a certain moment your Tasks page should work again and you know now which project/assignment is causing the error, just replace the corrupted assignment by a new one and it should work again
Hope this helps

SQL Server 2014 Express LocalDB automatic instance is not created

I have just installed SQL Server 2014 Developer Edition and noticed that there is no v12.0 automatic instance. Instead, there is MSSQLLocalDB automatic instance. Is this a bug?

Hi Alex,
According to your description, we need to verify if you install SQL Server 2014 Developer edition and SQL Server 2014 express edition. LocalDB is only just a lightweight version of Express version that has all its programmability features. If you install
SQL Server 2014 express LocalDB, please ensure you install automatic instances of LocalDB and not named instance of LocalDB. Usually,
when the target machine has the specified version of LocalDB installed, the automatic instance of
LocalDB for that version is available on the target machine as well. The name for the automatic instance is a single v character followed by the
LocalDB release version number in the format
xx.x. For example, v12.0 represents SQL Server 2014. For more information, see:
http://msdn.microsoft.com/en-us/library/hh510202(v=sql.120).aspx
If the issue still exists after checking the above suggestions, you can submit a feedback to Microsoft such issues, I would recommend to submit it to the Microsoft Connect at this link
https://connect.microsoft.com/SQLServer/Feedback. This connect site will serve as a connecting point between you and Microsoft, and ultimately the large community for you and Microsoft to
interact with. Your feedback enables Microsoft to offer the best software and deliver superior services, meanwhile you can learn more about and contribute to the exciting projects on Microsoft Connect.
Thanks,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

How do I create a project site after I publish a project in Project Server 2013?

How do I create a project site after I publish a project from project pro 2013 in Project Server 2013? I'm trying to look for an option in the ribbon but haven't found any.
Thanks
James T.F

Hi James,
See in the article the procedure for site provisionning settings.
Note that the project site is created based on the template associated to the chosen project type (EPT) when the user first publishes his project. Be aware that if you allow the user to choose weither or not he'll create a sharepoint site when publishing
his project, he will be prompted in Project Pro with a dialog box giving the choice to create or not the site.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Project Server default groups when we create new project site

Hi,
When we create new project site in project server 2013 in site settings page some default groups are already present with some default permissions and some default members.
Interesting thing is that the members of these group are same when ever we create a new site.
Can you please help me understand, what these groups are, how they get created and how they are having some default members. Where are these members coming from.
Our project server is having project server permission mode.
Thanks,
Bhawna.

I briefly searched the MSTechNet but was not able to find a succinct article on this point for 2013, if someone has that, can they pls share. However, if you read most of the articles under this area,
you get the idea.
http://technet.microsoft.com/en-us/library/fp161361(v=office.15).aspx
From 2010 this applies and is still "similar"
http://technet.microsoft.com/en-us/library/cc197668(v=office.14).aspx
In 2013, for every Project Site (connected SharePoint site as it is now called in 2013), 2 Site specific SharePoint security groups are created: "SiteProjectName Project Managers (Project Web App Synchronized)"
& "SiteProjectName Team Members (Project Web App Synchronized)".
And Web Administrators (Project Web App Synchronized) is also created.
In addition, the default SharePoint groups for: Site Members, Site Owners, Site Visitors are present but remain empty.
Project Server controls the creation of these groups and the membership. The membership is a "formula" that goes something like this: If the user is the Project Owner then put them in the PM group.
If the user is a PWA Administrator, then put them in the Administrators group. If the user is a team member on the project, then put them in the Team Members group. There are other factors like RBS that are used in the formula.
Reading the descriptions of the groups reveals that for Project Managers =
Users who have Published this project or who have Save Project Permission in PWA.
For Team Members = Users who have assignments in this project in PWA.
I believe these are the old 2010 descriptions and actually Team Members = anyone who is part of the Build Team even if no assignments.
Further complicating matters is that if you are a site collection admin, you will see all the groups, for PWA and for all the project site (b/c you are actually seeing the site collection groups).
But only the ones mentioned above apply specifically to this project site.
Hope this sheds some light on the topic,
Thanks, Eric S. Pcubed

Unable to Change Project Start Date in Project Server 2013

Dear All,
I have created new EPT in Project Server 2013. After that, when i am creating any new project in PWA 2013 by using newly created EPT, then i am not able to change Date as per my requirement.
Basically, EPT created on 02/18/2015 & even though i am changing Project start date then its again showing same date (02/18/2015)
Kindly suggest what i can do.

Hello,
Does this new EPT have a project plan template associated? What happens if you set the EPT not to have a plan template then create a new project from this EPT? Does that let you update the start date? The start date should default to today (date the project
plan was created). If that works as expected, add the plan template back to the EPT (if you had one to start with) and test creating another project to see if that then works or you then get the same behaviour. This will point us to the cause hopefully.
Do other EPTs work as expected?
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS |
MVP | Downloads

Workflow status web part gives error when going back to previous stage (using GO TO) in Project Server 2013 workflow

Hi,
Workflow status web part gives error when going back to previous stage (using GO TO) transition activity in Project Server 2013 workflow.
Please guide how to create a workflow which restarts from a desired stage.

Thanks for your prompt reply....
It gives following error
Workflow Status
This Web Part was unable to load.
Information that may be useful in solving this problem was written to the Unified Logging Service (ULS) log on the Project Web App with the following ID: e95a9c9c-1f68-90d7-0a3e-5951df70fec6
For more information, contact your Project Web App administrator.
what do you mean to restart the Project Server 2013 with different project name, please elaborate....

Notification to Manager if task/Time sheet not approved in Project Server 2013

is there any option if any user(Resource) updated his/her task & sent to his/her Manager for approval
and Manager is not approved ( say in said timeline or days) then some notification should go to one step up (as Reporting Manager of that Manager who not approved task update & time sheet) in Project Server 2013?

A solution could be to create email subscriptions on an SSRS report containing the non-approved task updates by manager.
See reference here:
http://bhushan.extreme-advice.com/email-subscriptions-for-ssrs-reports/
Hope this helps,
Guillaume Rouyre, MBA, MVP, MCP |

Project Server 2013 - Project Site Provisioning Settings - Do not create a site

Similar Messages

Maybe you are looking for