Promoting Changes of Distrbution model to production system

Hi Experts,
There is need for changing the distribution model in production system, if we promote the distribution model from development system, we have to run BDLS to change the sender and partner names. But this requires down time of production system, which we dont want to take. And we cant run BDLS when the transaction are carrying out by users. Please suggest the best way to promote the changes of distribution model to production system..
Cheers,
Prasanna

The only other way I can think of is make BD64 related table directly maintainable in Production so it will allow changes in Production system.
You can get the table names to update from your tranport request that you are planning to move to production.
I think thats the way systems are generally configured because of the Issues you are facing.
Regards
Shital

Similar Messages

PD-ORG: changing user assignments in a productive system

Hi,
We get the following: in our productive system obviously it is prohibited to do any changes to customizing. When in PPOME we change a user assignment to a position and try to save it, a message appears that the system is closed for changes. After cancelling this, the changes are saved correctly. This is very confusing to our maintenance guys.
Can this message be avoided (only for user assignments)>

with WFOBJ only tasks's agent assignment are out-of-transport
using CORR, everything else is open.
This is the setting that the SAP has programmed to solve this kind of requirement, having the agent assignment done in the production system, while maintaining the organizational model in another way (e.g. by ALE scenario).
Before 4.6B, only CORR was available.

Change of decimal places in productive system

Hello
We are on ECC 6.0 in a post Go Live environment.
In our productive system we have set the decimal places to 2. For our business requirements, we would like to maintain 3 decimal places to 3 for Logistics modules (SD / MM & PP) where as we would like to maintain 2 decimal places for Financials module.
Pls advise us of the methodology of this changeover as well as the possible side effects as a result of this change.
Thanks & Regards,

Hello
The number of decimal places saved on the database is determined by the Global Settings made in Customizing for that unit (unit of measure or currency unit). If no entry has been made in Customizing, the number of decimal places saved for this key figure and characteristic value is the number of decimal places shown in the planning table at the time of saving. If the key figure has no displayable unit (for example, if it is a percentage), all the decimal places are saved.
However, you need to perform some testing of scenarios to really know the impact 2 different decimals. Definitely, there is one aspect, whether any conversion is required or is it just a display of values in decimals.
Data from FI to other modules is not a issue, but data from other modules to FI should be able to take this extra decimal.
Although personally in my opinion it is not going to cause any errors, please test the same.
Check documentation on Key Figures
Reg
assign points if useful

FSE2 - Change Financial statement version in production system

Hi,
I have an requirement, my client wants to change the financial statement version from FSE2 transaction in the production system.
For this I made FSE2 and V_T011 as current settings in SOBJ transaction and executed the transaction FSE2 which is still giving error message of "Client 032 has status 'not modifiable'".
Can any one let me know how to make it happen? so that user can able to maintain the financial statement version from FSE2 transaction in production system.
Thanks in advance.
Regards,
Abdul

Hi Abdul,
I am not sure if the problem has been resolved or not but if you can follow the steps below I hope your problem will be solved.
First, find out that what application area and message number are issued when you try to modify the financial statement version. To do this, go to t-code FSE2 in your production system. Once message pops up click on help button beside the exist button to display the long text of the message.
Usually this message number is FE146 which means the application area is FE and the message number is 146. (I know you know this )
In order to switch off this message, go to T-code OBA5, enter APPLICATION AREA 'FE" and press enter key. Now click on NEW ENTRIES button, enter the relevant settings Msg: 146, leave user name blank, Online "-", Batchl "-", Standard "E". Press the enter key again and click on Save button.
You can now go to the Production client and attempt to modify the financial statement version by going into T-code FSE2. Enter relevant financial statement version and click on the EXECUTE button. When you make your changes and click on SAVE, you will see a message that "Client xxx has status 'not modifiable'".
If you press Enter key, the system will display a message saying that financial statement version has been changed and your changes will have taken effect.
I hope this way your problem will be resolved.
Let me know if this help
Thanks
Naseem

Transaction Launcher: Logical System in Production System does not change

Hi,
I created a transaction launcher in the CRM development system (CRD) to launch the transaction IL02 in the ECC 6.0 system (ECD). Then I transported the changes from CRD to the CRM production system CRP. I also transported the changes from ECD to ECC production system ECP.
However, when I see the transaction launcher in CRP system, it is still configured for the URL of ECD. I want the transaction launcher to connect to ECP. One option I have is to change the class name in the CRP system. However, I am not allowed to create a new ABAP class in the production system. Is there any other way to change the target system automatically in production system?
Thanks,
Rohan.

Thanks Piyush. Could you be a bit more specific? I followed these steps:
1. In transaction CRMS_IC_CROSS_SYS, created a logical system URL for production system
2. In customizing setting Copy/Delete Launch Transactions, deleted the transaction launcher id.
3. In customizing setting Configure Transaction Launcher, created the same transaction launcher id newly.
I still am not able to change the logical system. However, I can do it if I change the class name.
While deleting the transaction launcher id, should I be deleting all dependencies?
Regards,
Rohan.

Maintain overhead rates in production system

Hi experts,
i want to maintain percentage overhead rates in production system, but system has status not modifiable. I found t-code S_ALR_87008275, choose Status, double click on transaction, i found IMG activity SIMG_ORKK_WERK_KZZ2 and area menu KKSM, than i triggered SE16 table CUSAMEN and create new class and object, all i transport to product system. But i can change or create overhead in production system only, but not in details concrete Percentage.
What shall i do to change in details percentage?
Thanks for advice.
Gustavo

Hi,
check SAPNET note 301665 maybe 310768.
best regards, Christian

Not able to change the data of test data containers in production system

Dear All,
We have created eCATT scripts in Development SolMan System and moved the transports to Production SolMan System. Customer wants to change the data at Test data containers and run the scripts in production system but we are not able to edit the data.
May be the reason is SCC4 transaction code has set the below option.
Changes and transports for client-specific Objects
u2022 No changes allowed
Customer doesnu2019t want to change the above option and wanted to change the test data containers to give different datau2019s and run the eCATT scripts.
Could you please let me know the solution for this?
Your help is really appreciated.
Thanks,
Mahendra

eCatt has the feature where you don't need to transport the scripts or test configuration to our target system. We can keep all our scripts and test data in Solman and run this script any other system in your landscape using the System data container and target system.
Maintain the production as one of the target system in System container in Solman and point that system while running the script. Change the test data in Solman to run this script.
Let me know if you need more information
thanks
Venkat

Support message and change requests only for production system

Hi guys,
I would like to connect the solman helpesk with CHARM ( CHARM is still running ).
In CHARM I have to create a CR only for production system. ( don't know why - but works as designed).
In SAP helpdesk I can create support messages for every kind of system type but if I want to connect both (HD and CR) , the source system (ibase component) of the issue will copied to the CR and runs in error because of the rule (only p-system) of CHARM.
Of course I can change the ibase to production system manually in SDCR but it seems a very error-prone method.
Now my question: is it possible to change the ibase component due to the creation of CR by copy rule or something like this?
Kind regards
Rayko

Hi Rayko,
We do not have this option.
Once in ChaRM, we assume that the changes will always correct an issue in the PROD system.
I would recommend to open the tickets directly with the PROD system IBase, once the issue is also happening there.
Best Regards,
Fernando

Logical System Change for Production System

Hi experts
We have new CRM and BI project. Logical System name of our ERP production system is not in naming standart. So we want to change logical system name and run BDLS in production system.
Is there any risk about this prosedure?
Best Regards...

Hi,
It is not advisable to change the logical system in production client once its assigned.
Regards,
Nisit

TWO Changes In Production System

Hi , there are two changes in Production system,
one is there is a report i have to do some modification in PROD,for this have to do in DEV,QA,PROD Respectively , here whether i have to use old request to new one , is this is the right practice or not,
second in transfer rules there is a conversion routine , i have to do some modification , How can i do like once again DEV,QA,PROD
Hope u understand the problem
With Regards
MAHI

Hi,
Normally we dont have any authorization for changing the objects directly in production.
You need to make the required changes in Dev and then move to Quality and then to Production. Hence you need to create a new requrest for all the changes you made in Dev and move to Quality and then to Production.
Hope this helps.
Regards,
K.Manikandan.

How to change the worklist in schedule manager in production system

we are using schedule manager (SCMA) to arrange the daily process in SAP system. but we have to config the worklist and transport it to the production system every time cause in production system if we press edit worklist there would be a message called " TK430 The system administrator has set your logon client to the 'not modifiable' status.Client-specific objects can not be changed in this client."
Is there any way that I can directly change the worklist in production system?
Thanks.
Jiajia

Hi SUN,
Take a look at 11g Grid Control: Steps for Migrating the 11g Grid Control Repository from One Database to Another [ID 1302281.1]. Step 4.7
and
http://gavinsoorma.com/2010/10/11g-grid-control-how-to-change-the-oms-repository-database-listener-port-or-hostname/
ps Stop the OMS first.
Eric

Aggregates in Production System and Change Run Hierarchy

Hi All,
Can anybody tell me, Why should we create Aggregates in Production System nd How?
What is Change Run Hierarchy nd How to perform this?
Reply back me to [email protected]
Regards,
Kiran

Hi Kiran,
Aggregates are nothing but a subset of your Infocube... when a query is executed, it firstl looks for the presence of the data in your aggregates and if found then it fetches the reocrds from there itself.. Else not, it'll search teh entire infocube and then fetch the records which is at a high risk of time consumption and the performance of the Query execution slows down or becomes worse significantly.. for this purpose, you build aggregates.. how do you decide whether you should go for aggregates or not is based on the following criteria...
if the %Data Base time is > 30% and if the KPI ratio (selected to transferred records) is > 10, then you go for the aggregates... you can get these details in the ST03N transaction by choosing Expert mode and selecting BI Workload... you can find all the statistics related to the Query execution starting from the front end time to db time/...
thats all about your aggregates...
Attribute or Hierarchy change run is done so that any changes to your Master data Attributes will have to get effected in terms of your reporting...
say for eg.. ur name is XYZ and loc is in India.. this is how it'll be reflected in your reporting also.. but at a later point in time, if you have changed your location from India to Europe, then for that to be reflected in your reporting, you'll have to perform an Attribute change run for that Characteristic...
Hope it solves your issue..
Regards
Manick

Database change in production system

Hi Experts
            I have created a ztable and transported to production system.
           Now i need to delete one column, or change the data element and domain, is it possible, will it create any problems.
        if data already exists for a particular field in production system, now can i change the data element and domain without losing the data.
           Pls help me on this, and give any notes about the database changes after transported to producion system.
Regards
Rajarm

Hi..
I tried this..
If u rename a field or changes occuring to a paricular field means..
The corresponding field data will be deleted..
Post me for furthur Queries regarding this.
Regards
Bala..

Code changes in Production system.

Hi all,
Due to the unavailability of the development and quality i want make code changes in production system.
Please tell me is this possible and also i want know that does it effect or not?
Regards,
Ramprasd

Hi,
For editing in PRD system, u need to get authorization for editing. To get auth object, contact basis.
But proper way to edit a code is modifying in DEV, then transport it to QAS & PRD.
Regards,
Prem

In Production system Infocube mange screen selection changed

Dear Experts,
I have problem with my production system.
Problem:In Prod system for all the Infocube settings has changed may yesterday because of that we are not able to see in the manage screen Tranferred and Added records colums.
Could you please suggest how to overcome this situation in production system and also why it was happend suddenly?
Regards,
Kiran.

Hi,
Thanks for your prompt responce, but nowthing was happend like system refresh or package upgarede.
Could you please suggest me any other ways to resolve this issue.
Regards,
Kiran.

Promoting Changes of Distrbution model to production system

Similar Messages

Maybe you are looking for