PS2 mouse loosing wheel function when switching with KVM

Hello everyone,
I've used the last couple of days struggling with a problem with my arch linux where my mouse won't use the scroll wheel after switching my KVM. From a search here on the forum I deduced that I'm not the only one with that particular problem. Unfortunately noone seems to have found a solution. (None that I could find...)
What I have tried is:
* Change the mouse protocol in my xorg.conf file : auto, IMPS/2 and ExplorerPS/2 are the one's I could think of. Actually ExplorerPS/2 is the one used in my kubuntu setup, and there it works just fine!?
* Used xev to see if my wheel is triggering any response : Well, it doesn't.
* Compared the udev rules in my kubuntu setup to them in arch : I don't truly understand the rules, so I'm not sure if there is something to be gained from this. There are a lot more rules files in kubuntu.
* Run "cat /proc/bus/input/devices" : The list of devices contains two references to mice.
Mouse0 is "Macintosh mouse button emulation"
Mouse1 is "PS2++ Logitech TrackMan" (my mouse)
I'm also a bit unsure what to do with this info, but it seems the wrong mouse is recognized. Is there a way to force X to use mouse1?
Thanks for taking the time to read my post. And if you have any ideas to what I can try, don't hesitate to write. Any help is greatly appreciated.
If a copy of some of my config files are needed, just let me know.

Actually it happens when I switch between arch and any of my other computers connected to the kvm. (windows and kubuntu)
Here is the serverlayout
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
and the input section
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "dk"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "CorePointer"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
I noticed something today. When I lose the function of my mouse wheel, the wheel on my keyboard works instead? Don't know if that could be helpful in finding a solution.

Similar Messages

Loss of Mouse Scroll Wheel Function

I took a leap and a leap of faith upgrading from Firefox 3.something to 11.0. I'm working through the little annoying differences in the user interface, but I'm having a problem with scrolling.
I can't put my finger on any particular web site or page size, but I find that occasionally my mouse scroll wheel will stop working with Firefox and I must use the scroll bar to move through a document. Once it goes, it's gone. I can move to another tab that previously scrolled with the wheel and it no longer does.
If I close Firefox and restart it, the scroll wheel works again (even with the page on which it previously quit. If I leave Firefox running but switch to another application, the scroll wheel works there, so it's unlikely that the driver has become corrupted.
I'm running Windows XP SP3 and Firefox 11.0 (downloaded and installed 4/5/2012)

I doubt that I have a PDF open in another tab because I don't use the PDF plug-in to Firefox. When I go to a web site with a PDF and click on it, I get a pop-up that asks if I want to open it (I use Foxit) or save the file. I often have a PDF open when I'm on a web site however. I just opened one and everything's still OK. Then I went to a web site where I clicked on a PDF and told it to open it with Foxit, and things are still OK.
Like I said, I haven't yet found anything that consistently makes it happen.
As for updates, I really want to know if there's anything specific that might cause this problem. I don't like to make updates, not even Windows updates, unless I see that the update either solves a problem or gives me a feature that I really need. I look at the Windows updates and they all seem to be about security, which isn't a problem here. In the case of installing the new Firefox, I was getting tired of web sites telling me that I had an unsupported web browser (though usually I could get what I wanted). I'm NOT going to just let Windows do what it wants with my computer. I depend on it too much to do that.
Could it be that something that Firefox needs is running out of memory after browsing for a while? Is there something I could check for that? I think I have 1 GB of RAM in this Pentium 4.

I have a new iPhone - 5c, if my info is backup up onto iCloud is that enough so I don't loose my info when switching phones?

I have a new iPhone - 5c, if I back my info onto iCloud is that enough so I don't loose my info when switching phones?

Hey Gilly21!
I have an article for you that deals with backups and will hopefully help you understand iOS backups better:
iTunes: About iOS backups
http://support.apple.com/kb/ht4946
You can also find more information about the action of backing up your phone with iCloud or iTunes here:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
Take care, and thanks for visiting the Apple Support Communities.
-Braden

The mouse scroll wheel doesn't work with Xorg

I recently installed Solaris 10 on my x86 box. One issue is that the mouse scroll wheel doesn't work with Xorg. Hmmm... Okay, it sometimes did work, and most of the time went on strike, and recovered at random. This pattern continued.
My mouse is an ordinary PS/2 one with two buttons and a scroll wheel. I want to promise that there's absolutely nothing wrong with it per se. Here is some info:
$ uname -a
SunOS arbiter 5.10 Generic_127112-07 i86pc i386 i86pc
$ grep -i mouse /var/log/Xorg.0.log
(**) |-->Input Device "Mouse0"
(II) LoadModule: "mouse"
(II) Loading /usr/X11/lib/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
(==) NVIDIA(0): Silken mouse disabled
(II) Mouse0: Setting Device option to "/dev/mouse"
(**) Mouse0: Protocol: VUID
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/mouse"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 9
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
# The section about mouse in /etc/X11/xorg.conf follows:
Section "InputDevice"
        Identifier "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "auto"
        Option      "Device" "/dev/mouse"
        Option      "Buttons" "5"
        Option      "ZAxisMapping" "4 5"
        Option      "Emulate3Buttons" "false"
EndSection
# Note that the only result of explicitly changing protocol to ExplorerPS/2, PS/2, IMPS/2 or whatever else is that the cursor jumped here and there and everywhere when I moved the mouse.I ever post one in comp.unix.solaris to ask for help but got no effective solution. Thank you all.

You remember correctly, Yvan.
The 6.2.9 updater is available http://www.apple.com/support/downloads/appleworks629formac.htmlhere. Note that the updater is language specific. The one at the top of the list is for the International English version of AppleWorks. The US English version is the one in the box at the upper right, identified only by its file size.
Regards,
Barry

Bluetooth mouse won't reconnect when switched on

I have a 2.4GHz Mac Min (last model before being replaced by the model without DVD drive) and a Mac USB keyboard. I wanted to use a Bluetooth mouse as I don't like the trailing lead with a USB mouse, but I wanted a conventional three button type mouse as I need that for my RISC OS emulator program, so I bought a Logitech V470 Bluetooth mouse. I set it up in Bluetooth preferences with no problem and set it as a favourite. It then worked very well and was comfortable, smooth and accurate. The problem comes after I have turned it off, either when I am not going to be using the computer for a period of time, or at night, obviously to save batteries. When I switch the mouse back on, the computer and mouse simply will not reconnect. The only way I can get the mouse to reconnect is to plug in a USB mouse, delete the original device pairing, and set-up a new device again; or power the computer off and restart it. Sometimes restarting the computer doesn't work as a dialogue box will open over the password screen saying it can't find any mouse, then it finds it and shows the correct Mac Address of the mouse but even clicking any of the buttons on the mouse it still won't actually control the mouse pointer!
I have another Bluetooth mouse, a Microsoft 5000, which I use with my MacBook Pro so I tried that with the Mac Mini and once paired it works fine, *including* after being turned off, reconnecting within a second of being turned back on. So I asumed it was something to do with the Logitech mouse rather than the Mac Mini, and contacted Logitech. As it was a new mouse they suggested it was faulty and I have been sent a new one. However this one is the same and in one respect actually worse. Once paired it works fine just like the original, but once it has been switched off, again it will not reconnect when switch on. But with this one, even closing down the computer and restarting it won't connect the mouse. The only way with this one is to delete the pairing and set-up a new pairing again. That means whenever the computer or mouse are turned off, you have to connect a USB mouse so that you can get back in, delete the pairing and set-up a new pairing again, which is unacceptable.
However, if I boot the Mac Mini into Windows XP using bootcamp the Logitech mouse works as you would expect in all ways *including* reconnecting immediately after being turned on, if it has been turned off. Also I tried this mouse with a 2006 iBook G4 1.42GHz OS X 10.4.11 and again it functions correctly including reconnecting immediately it is switched back on. So these last two tests appear to show a fault with the Bluetooth firmware in Mac OS X on the new Mac Mini not a fault with the Logitech mice. After all, it is using the same Bluetooth and aerial whether in Mac OS X or Windows but it will only reconnect when in Windows. As a final test I set the MacBook Pro up for Windows 7 using bootcamp and again the mouse will not reconnect in Mac OS X on the MacBook Pro but it reconnects fine in Windows 7 on the same hardware.
Is there an answer to this problem? Do you agree it is a firmware/software fault? Does Apple know about it and are they going to do anything to correct the problem? Thanks. Roy

Yes, I do notice that connection can be lost sometimes and regaining it can be difficult. I have even had to go to the point of finding an old USB mouse to get it going again. I usually try turning off the switch on the mouse and then back on. Then I click it about 5 times or so, usually it picks it up again. Same thing with keyboard. Not sure if that helps at all. Good luck.

Call a Function when switching tabs in TabbedPanel

I am using Allan Jardine's DataTables javascript library , along with the Spry TabbedPanel. I have one table in each of a number of Tabs. The table in the tab opened by default (or if I use ShowPanel()) is fine. However, if I switch tabs, the other tables, which were hiden when the page was opened, are not correctly initialised, and don't display correctly. Doing anything that causes the displayed table to be redrawn results in the table displaying correctly, and from then on I can switch tabs and the tables are fine.
DataTables has an API function fnDraw(), which will cause a specified table to be redrawn. Is it possible to cause TabbedPanel to call a user specified function when the tabs are swapped, so I can call fnDraw()? I think this woiuld solve my problem.
Thanks
Ron

Thanks.
But I found a simpler way. At the end of the jQuery(document).ready(function(), which initialises the datatables, I added
var ret=TabbedPanels1.showPanel("expiredquotes");
oTable2.fnDraw();
var ret=TabbedPanels1.showPanel("confirmedquotes");
oTable3.fnDraw();
var ret=TabbedPanels1.showPanel("openquotes");
Which opens each of the "other" tabs and redraws the respective DataTable while they are "visible". Then at the end I display the 'default' Tab. I only need to do this once, when the page is opened, after which the tables are correctly formatted.
Regards
Ron

Mac Pro keeps crashing when using with KVM. where to start my investigation

hi guys.
i have recently ordered ATEN CS-1762 KVM switch (2 ports model) to control my Mac and PC with a single keyboard and mouse. This KVM supports USB and DVI. the problem i have is Mac crashing when i switch from PC. I contacted mfg lately and they are unaware of this issue due to not having Mac Pro to test with this appliance. They have tested it with Mac Mini, G4 and G5 though and all was OK. based on this they put a description that this box is compatible with Mac. Anyway, being relatively new Mac user i ask for your help.
here are my steps and some ATEN's thoughts:
1. accroding to ATEN tech support, i should power up my second computer after the first one was started and is running. firstly i start the Mac Pro, 5 mins after that i power up my PC.
2. When both computers are up and running (Mac is in KVM focus), i switch to PC and all seems OK. I have noticed though that if NumLock is activated during the PC session, I won't be able to switch back to Mac. However, even though NumLock is OFF i still may have troubles when switching back to Mac. So it is not the rule, but maybe the clue to start with..
NOTES:
1. if i start PC first, Mac won't start at all. The power led will be on, but there will be no picture on the monitor and it won't accept any keyboard/mouse inputs as well as it will be network inaccessible.
2. I tried looking into Mac's logs but need your help in getting this clear.
here is the log. as you will see it stops at 13:04 and then continues at 13:08 after reboot.
i've seen some parallel's VMs but i don't have Parallels installed. i used to have it, but then it never happened to work so i deleted it from the machine. can this be the case it is still somewhere?
pls guys, any thoughts are very welcome!!!
PS: i can cause Mac to crash the same way if necessary or if log looks inclomplete. the thing forgot to mention is: when Mac crashes and i reboot it, it will not necessarily boot up completely. i've noticed that i would have to reset the KVM switch prior to Mac's successful start up. so maybe i copied the wrong log (not the one immediately after the crash). pls advise here
Alex
EDIT: specs for machines are:
Mac Pro dual 2.6GHz, 1GB (+1GB aftermarket added half a year back, works perfectly), HDD 260GB, Nvidia 7300 256Mb.
PC - Supermicro dual xeon 1.6GHz, 4GB Ram, 4 x 36GB SCSI, Nvidia 5200 256 MB with Windows 2000 Server.
Apr 18 13:03:38 localhost kernel[0]: hi mem tramps at 0xffe00000
Apr 18 13:03:38 localhost kernel[0]: PAE enabled
Apr 18 13:03:38 localhost kernel[0]: 64 bit mode enabled
Apr 18 13:03:38 localhost kernel[0]: standard timeslicing quantum is 10000 us
Apr 18 13:03:38 localhost kernel[0]: vmpagebootstrap: 512109 free pages
Apr 18 13:03:38 localhost kernel[0]: migtable_maxdispl = 71
Apr 18 13:03:38 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Apr 18 13:03:38 localhost kernel[0]: 77 prelinked modules
Apr 18 13:03:38 localhost kernel[0]: ACPI CA 20060421
Apr 18 13:03:38 localhost kernel[0]: AppleIntelCPUPowerManagement: ready
Apr 18 13:03:38 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Apr 18 13:03:38 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Apr 18 13:03:38 localhost kernel[0]: AppleACPICPU: ProcessorApicId=2 LocalApicId=7 Enabled
Apr 18 13:03:38 localhost kernel[0]: AppleACPICPU: ProcessorApicId=3 LocalApicId=6 Enabled
Apr 18 13:03:38 localhost kernel[0]: AppleACPICPU: ProcessorApicId=4 LocalApicId=0 Disabled
Apr 18 13:03:38 localhost kernel[0]: AppleACPICPU: ProcessorApicId=5 LocalApicId=0 Disabled
Apr 18 13:03:38 localhost kernel[0]: AppleACPICPU: ProcessorApicId=6 LocalApicId=0 Disabled
Apr 18 13:03:38 localhost kernel[0]: AppleACPICPU: ProcessorApicId=7 LocalApicId=0 Disabled
Apr 18 13:03:38 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Apr 18 13:03:38 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Apr 18 13:03:38 localhost kernel[0]: using 10485 buffer headers and 4096 cluster IO buffer headers
Apr 18 13:03:38 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Apr 18 13:03:38 localhost kernel[0]: Started CPU 01
Apr 18 13:03:38 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Apr 18 13:03:38 localhost kernel[0]: Started CPU 02
Apr 18 13:03:38 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Apr 18 13:03:38 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Apr 18 13:03:38 localhost kernel[0]: Started CPU 03
Apr 18 13:03:38 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Apr 18 13:03:38 localhost kernel[0]: Security auditing service present
Apr 18 13:03:38 localhost kernel[0]: BSM auditing present
Apr 18 13:03:38 localhost kernel[0]: disabled
Apr 18 13:03:38 localhost kernel[0]: rooting via boot-uuid from /chosen: BE5A00F3-0C3D-4125-9DE4-3F2193D3DAA8
Apr 18 13:03:38 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Apr 18 13:03:38 localhost kernel[0]: USB caused wake event (EHCI)
Apr 18 13:03:38 localhost kernel[0]: FireWire (OHCI) TI ID 8025 built-in now active, GUID 0016cbfffe6cfb5c; max speed s800.
Apr 18 13:03:38 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT0 @0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/ST3160812AS P Media/IOGUIDPartitionScheme/Customer@2
Apr 18 13:03:38 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
Apr 18 13:03:38 localhost kernel[0]: jnl: replay_journal: from: 3560448 to: 7934976 (joffset 0x48b341000)
Apr 18 13:03:38 localhost kernel[0]: HFS: Removed 9 orphaned unlinked files
Apr 18 13:03:38 localhost kernel[0]: Jettisoning kernel linker.
Apr 18 13:03:38 localhost kernel[0]: Resetting IOCatalogue.
Apr 18 13:03:38 localhost kernel[0]: PXS1: family specific matching fails
Apr 18 13:03:38 localhost kernel[0]: Matching service count = 1
Apr 18 13:03:38 localhost kernel[0]: Matching service count = 2
Apr 18 13:03:38 localhost kernel[0]: Matching service count = 2
Apr 18 13:03:38 localhost kernel[0]: Matching service count = 2
Apr 18 13:03:38 localhost kernel[0]: Matching service count = 2
Apr 18 13:03:38 localhost kernel[0]: Matching service count = 2
Apr 18 13:03:38 localhost kernel[0]: NVDANV40HAL loaded and registered.
Apr 18 13:03:38 localhost kernel[0]: PXS1: family specific matching fails
Apr 18 13:03:38 localhost kernel[0]: Previous Shutdown Cause: 3
Apr 18 13:03:38 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Apr 18 13:03:38 localhost mDNSResponder-108.4 (Jan 8 2007 20: 39:46)[30]: starting
Apr 18 13:03:38 localhost memberd[38]: memberd starting up
Apr 18 13:03:38 localhost DirectoryService[42]: Launched version 2.1 (v353.6)
Apr 18 13:03:39 localhost lookupd[44]: lookupd (version 369.6) starting - Wed Apr 18 13:03:39 2007
Apr 18 13:03:39 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:17:f2:01:63:16
Apr 18 13:03:39 localhost configd[34]: No AirPort Driver found.
Apr 18 13:03:39 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:17:f2:01:63:17
Apr 18 13:03:39 localhost diskarbitrationd[37]: disk0s2 hfs FDAB59BA-2B84-3AD5-AF66-4BD8CFA20261 Macintosh HD /
Apr 18 13:03:40 localhost lookupd[55]: lookupd (version 369.6) starting - Wed Apr 18 13:03:40 2007
Apr 18 13:03:42 localhost kernel[0]: Intel8254x -- Link Up -- 00:17:f2:01:63:16 -- called by interruptOccurred() --
Apr 18 13:03:42 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Apr 18 13:03:42 localhost kernel[0]: -- Auto-Neg Advertise Reg (04d) = 0xde1, Link Partner Ability Reg (05d) = 0x41e1, Gig Advertise Reg (09d) = 0xe00, Gig Link Partner Ability Reg (10d) = 0x4000
Apr 18 13:03:42 localhost mDNSResponder: Adding browse domain local.
Apr 18 13:03:43 localhost loginwindow[62]: Login Window Started Security Agent
Apr 18 13:03:46 localhost kernel[0]: Intel8254x -- Link down -- 00:17:f2:01:63:17 -- called by enableHardware() --
Apr 18 13:03:46 localhost kernel[0]: -- Auto-Neg Advertise Reg (04d) = 0xde1, Link Partner Ability Reg (05d) = 0x0, Gig Advertise Reg (09d) = 0xe00, Gig Link Partner Ability Reg (10d) = 0x4000
Apr 18 13:03:46 Alexs-Computer configd[34]: setting hostname to "Alexs-Computer.local"
Apr 18 13:03:46 Alexs-Computer TabletDriver[71]: RunApplication called while eRelaunching
Apr 18 13:03:52 Alexs-Computer configd[34]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Apr 18 13:03:52 Alexs-Computer configd[34]: posting notification com.apple.system.config.network_change
Apr 18 13:03:52 Alexs-Computer lookupd[82]: lookupd (version 369.6) starting - Wed Apr 18 13:03:52 2007
Apr 18 13:03:52 Alexs-Computer ntpdate[94]: can't find host time.euro.apple.com\n
Apr 18 13:03:52 Alexs-Computer ntpdate[94]: no servers can be used, exiting
Apr 18 13:03:55 Alexs-Computer configd[34]: target=enable-network: disabled
Apr 18 13:04:15 Alexs-Computer configd[34]: posting notification com.apple.system.config.network_change
Apr 18 13:04:15 Alexs-Computer lookupd[148]: lookupd (version 369.6) starting - Wed Apr 18 13:04:15 2007
Apr 18 13:04:15 Alexs-Computer SystemStarter[41]: "/Library/StartupItems/Tablet" failed security check: permissions
Apr 18 13:04:17 Alexs-Computer kernel[0]: Parallels Workstation Hypervisor started.
Apr 18 13:04:17 Alexs-Computer kernel[0]: Parallels Workstation VMM Main driver started.
Apr 18 13:04:18 Alexs-Computer kernel[0]: comparallels_kextPvsvnic: Ethernet address 00:01:23:45:67:89
Apr 18 13:04:19 Alexs-Computer SystemStarter[41]: Parallels VirtualMachine drivers (149) did not complete successfully
Apr 18 13:08:25 localhost kernel[0]: hi mem tramps at 0xffe00000
Apr 18 13:08:25 localhost kernel[0]: PAE enabled
Apr 18 13:08:25 localhost kernel[0]: 64 bit mode enabled
here couple more logs right at the moment of crash (found in paic.log). hopefully then can shed som elight on the troubles:
pls advise
Wed Apr 18 13:04:16 2007
panic(cpu 0 caller 0x001A429B): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
CR0: 0x8001003b, CR2: 0x00004000, CR3: 0x01019000, CR4: 0x000006e0
EAX: 0x23a3d578, EBX: 0x00000000, ECX: 0x00001000, EDX: 0x00004000
CR2: 0x00004000, EBP: 0x2544bc18, ESI: 0x23a3d578, EDI: 0x00004000
EFL: 0x00010206, EIP: 0x0019637c, CS: 0x00000008, DS: 0x00000010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x2544b9d8 : 0x128d08 (0x3cb134 0x2544b9fc 0x131de5 0x0)
0x2544ba18 : 0x1a429b (0x3d0e4c 0x0 0xe 0x3d0670)
0x2544bb28 : 0x19ada4 (0x2544bb40 0x23a39578 0x2544bb98 0x84ae50)
0x2544bc18 : 0x84b148 (0x23a39000 0x2 0x2544bc68 0x1a1738)
0x2544bc38 : 0x8393d4 (0x2544bddc 0x0 0x2544bc68 0x4b0000)
0x2544bd18 : 0x6ca33a (0x23a39000 0x2544bdaa 0x2544bdaa 0x84)
0x2544bd78 : 0x6be697 (0x3c34000 0x2544bdaa 0x2544bdaa 0x84)
0x2544bdf8 : 0x6a72e3 (0x3c34000 0x1 0x2544be48 0x1a1738)
0x2544be18 : 0x6aee4a (0x553f8000 0x0 0x3ff96a27 0x3d87)
0x2544be78 : 0x546b55 (0x3c34000 0x2544beac 0x1 0x1a26ce)
0x2544bec8 : 0x54a1d0 (0x3a21e00 0x3 0x3f60ddf8 0x3d87)
0x2544bee8 : 0x54bc8d (0x3a21e00 0x7abf 0x5cbd220 0x5cbd160)
0x2544bf28 : 0x39c536 (0x3a21e00 0x3a40280 0x8 0x2)
0x2544bf78 : 0x13d7d9 (0x3a40280 0x3a87e78 0x0 0x0)
0x2544bfc8 : 0x19ac1c (0x0 0x0 0x19e0b5 0x397fcec) Backtrace terminated-invalid frame pointer 0x0
Kernel loadable modules in backtrace (with dependencies):
com.apple.NVDAResman(4.5.2)@0x6c9000
dependency: com.apple.iokit.IOPCIFamily(2.2)@0x5e0000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.5)@0x69f000
dependency: com.apple.iokit.IONDRVSupport(1.4.5)@0x6ba000
com.apple.iokit.IONDRVSupport(1.4.5)@0x6ba000
dependency: com.apple.iokit.IOPCIFamily(2.2)@0x5e0000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.5)@0x69f000
com.apple.iokit.IOGraphicsFamily(1.4.5)@0x69f000
dependency: com.apple.iokit.IOPCIFamily(2.2)@0x5e0000
com.apple.iokit.IOHIDFamily(1.4.10)@0x531000
Kernel version:
Darwin Kernel Version 8.9.1: Thu Feb 22 20:55:00 PST 2007; root:xnu-792.18.15~1/RELEASE_I386
Wed Apr 18 17:06:26 2007
panic(cpu 1 caller 0x001A429B): Unresolved kernel trap (CPU 1, Type 14=page fault), registers:
CR0: 0x8001003b, CR2: 0x00004000, CR3: 0x01019000, CR4: 0x000006e0
EAX: 0x23a4d578, EBX: 0x00000000, ECX: 0x00001000, EDX: 0x00004000
CR2: 0x00004000, EBP: 0x25443c18, ESI: 0x23a4d578, EDI: 0x00004000
EFL: 0x00010206, EIP: 0x0019637c, CS: 0x00000008, DS: 0x04080010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x254439d8 : 0x128d08 (0x3cb134 0x254439fc 0x131de5 0x0)
0x25443a18 : 0x1a429b (0x3d0e4c 0x1 0xe 0x3d0670)
0x25443b28 : 0x19ada4 (0x25443b40 0x23a49578 0x1 0x4065004)
0x25443c18 : 0x84b148 (0x23a49000 0x2 0x25443c48 0x713bbf)
0x25443c38 : 0x8393d4 (0x25443ddc 0x0 0x25443c68 0x7116c2)
0x25443d18 : 0x6ca33a (0x23a49000 0x25443daa 0x25443daa 0x84)
0x25443d78 : 0x6be697 (0x3c61c00 0x25443daa 0x25443daa 0x84)
0x25443df8 : 0x6a72e3 (0x3c61c00 0x2 0x25443e28 0x1e)
0x25443e18 : 0x6aee4a (0x523e0000 0x0 0xfd8e30e2 0xc93)
0x25443e78 : 0x546b55 (0x3c61c00 0x25443eac 0x2 0x1a26ce)
0x25443ec8 : 0x54a1d0 (0x3a21e00 0x3 0xfcf5a332 0xc93)
0x25443ee8 : 0x54bc8d (0x3a21e00 0x1917 0x4336be0 0x4336b20)
0x25443f28 : 0x39c536 (0x3a21e00 0x3a40280 0x8 0x2)
0x25443f78 : 0x13d7d9 (0x3a40280 0x3a39ff8 0x0 0x3303)
0x25443fc8 : 0x19ac1c (0x0 0x0 0x19e0b5 0x5cb2144) Backtrace terminated-invalid frame pointer 0x0
Kernel loadable modules in backtrace (with dependencies):
com.apple.NVDAResman(4.5.2)@0x6c9000
dependency: com.apple.iokit.IOPCIFamily(2.2)@0x5e0000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.5)@0x69f000
dependency: com.apple.iokit.IONDRVSupport(1.4.5)@0x6ba000
com.apple.iokit.IONDRVSupport(1.4.5)@0x6ba000
dependency: com.apple.iokit.IOPCIFamily(2.2)@0x5e0000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.5)@0x69f000
com.apple.iokit.IOGraphicsFamily(1.4.5)@0x69f000
dependency: com.apple.iokit.IOPCIFamily(2.2)@0x5e0000
com.apple.iokit.IOHIDFamily(1.4.10)@0x531000
Kernel version:
Darwin Kernel Version 8.9.1: Thu Feb 22 20:55:00 PST 2007; root:xnu-792.18.15~1/RELEASE_I386

ok so i experimented a little with the hardware and here what i have to the moment:
1. i thought that the usb kb could be the case for mac os to crash so i disconnected the cable from the KVM and plugged normal apple kb to the mac.
2. however when i tried switching back to mac, the machine crashed again.
from what i noticed for the last few days 'working' with this kvm switch was the screen resolution changing while i was switching. meaning the screen flickered for couple of times prior to showing 1280x1024 that was set up in the system. during flickering the resoution became 1024x768. i 've seen it pretty clearly, just it was for half of a second.
also when powering up both machines, they were starting with 1024x768 and not 1280x1024 as was set up. i had to manually change the screen resolution on both machines (pc and mac) every time after successful start up.
so by far my understanding is that kvm switch forces monitor for 1024x768 during switches and on start up. it also causes the OSes (win2K and MacOSX) to lose 1280x1024 and accept 1024x768 as if the monitor was changed and couldn't operate at a higher resolution.
having said that i uploaded this info to kvm mfg (ATEN) and couple more mac forums so that this info may help someone else when ordering a kvm for mac. at the same time i am still open for any thoughts, advices and crazy ideas to get round this bug.
alex

File Adapter Issue: Not functioning when used with BIC user modules

Hi! ALL
We have been experiencing issue with file adapter, when we SeeBurger BIC user modules in sender file - FTP communication channel.
The regular FTP functionality is working fine if do not have BIC user modules defined under the module tab.However, when put in BIC user module parameters it is not picking up the file.
Also, we do not see any error logs; even the communication channel monitoring does not show any error log....only show the polling interval success, without the file being picked up.
This issue started appearing once we deployed our new sda file....as we changed our BIC mapping.
We can try doing back to our previous sda file....to see it fixes the problem.
But, before doing that ....we would like to know where the cause of this issue....Can you point us to any error logs we can find on the PI server.
Your help is greatly appreciated!!
Thank you,
Patrick.

If you configured your logging correctly you should find in the log folders
./applications/com.seeburger.jucon/
./applications/com.seeburger.bicxiadapter/
Try to scan those for recent errors - if the no log files can be found you should check the defaultTrace.

I am unable to use the Live View function when working with JavaScript in Dreamweaver.

I am currently trying to set up my own website with dreamweaver and am very familiar with Java and JavaScript. However, whenever I try to use the Live View function it never lets me. Additionally, I am unable to preview my work in a browser as the option to do so is greyed out.
However, I have noticed that when using html in a project, all these functions are available. Any ideas how I can be able to use these functions?

Is it possible you meant to say you were "very unfamiliar with Java and javascript" in your initial post?
Javascript doesn't do anything without an html page to affect.
Java and javascript are not the same thing, they're really not even related other than browsers can be made to render both. Java is its own programming language while javascript is basically html's helper monkey. I don't think it's even feasible to "understand javascript" without knowing html. My last post still stands, if you are coding javascript, you need an html based page to turn it into anything but plain code to a browser, so the option to view it will never come up. When you preview the page it's attached to, it will function correctly (as long as it has been attached to the page correctly).
Java on the other hand can create programs that run without a browser at all and I've never gotten close to touching that monster.
You may need to explain what you're trying to do and post the code here to get the help you need.

Loose PRO functionality when upgrading above 7.0.1

Hi,
When I upgrade beyond 7.0.1 my pro registration is stated as invalid. The problem is consistent across my Mac computers & with versions 7.0.2 & 7.0.3.
I have tried deleting preference settings file & re-entering the registration code.
Any help would be greatly appreciated.
Vince

Hi,
Thanks for taking the time to reply to my post.
Firstly, I do have a PRO license for QT 7, which as stated worked fine with version 7 & 7.0.1 i.e. the greyed out features in the standard version are available.
However, when I upgraded from 7.0.1 to 7.0.2 & 7.0.3 I loose the PRO features & re-entering the license however carefully makes no difference.
If I down grade to QT 7.0.1 I get the PRO features back.
I'm a reasonably able Mac user & frankly I just can't figure this one out at all.
Vince

Monitor blacks out when booting with KVM Switch in the middle

Hi
I have attached my Xserve with an iMac G5 to a KVM Switch. When I boot up the Xserve the monitor blacks out after the apple logo.
I know that the Xserve tries to autodetect the monitor. Apparently it fails in its job when the KVM is in the middle. Everything works well when I remove the KVM and connect the monitor directly to Xserve.
Any ideas how do I disable the monitor autodetect feature - or something?
Xserve (intel) Mac OS X (10.4.1) dkvm-4u KVM switch

Hi all
I did try that. No luck.. Strangely enough, I realized that when the server boots up, the login screen defaults to 85HZ refresh rate. I found a site that explains the plist file that you can change to force it to 60HZ. What is weird it if I boot the Mac connected to another LCD, then move the cable to the KVM, it works. It almost seems like when the mac is booting, it sends some sort of signal just before the login screen comes up, that screws up this KVM. Tried updating firmware, still in the process of speaking with the KVM support people...
very strange..
Enio

PS2 mouse with MSI K8N Neo2 Platinum

Me and my uncle both have MSI K8N Neo2 Platinum motherboards and both boards were bought from different places at different times. Both boards are exactly the same and both have the latest 1.4 BIOS.
We're both having the same problem with ps2 mice, I myself am not bothered about this problem but my uncle is so I need help.
Basically when you insert a ps2 mouse into the back of both our pcs, 7 times out of 10 the pc loads windows but the mouse doesnt move. The mouse is completely frozen. When you plug a usb mouse in, i can use that but still the ps2 mouse doesnt move.
When you plug in a ps2 keyboard along with the ps2 mouse, the mouse works everything time but without the ps2 keyboard in, most times the ps2 mouse doesnt work.
We both have no problems with usb devices but the ps2 mouse port (Green) isnt working all the time.
Having a quick look at this forum, i saw this thread.. PS/2 mouse not working exact same problem as me and my uncle.... is there a fix out now for this?
I use a usb mouse anyway and i know if my uncle switches to usb it will work but he shouldnt have to do this, if a board has ps2 support, it should work.

Quote
Two choices. USB Mouse or RMA it
What does RMA it mean?
Quote
The PS/2 ports on any computer can get blown if you plug a PS/2 device when the computer is powered.
I didnt know that, thanks for telling me, i know not to do this in the future.
Quote
Other than that, check BIOS to see if PS/2 option is enabled!
If ps/2 wasnt enabled in the BIOS, the ps2 devices wouldnt work at all would they? My ps2 keyboard works fine, my uncles ps2 mouse doesnt work sometimes so ps2 must be enabled in the bios.
thanks for the replies, could this be fixed if MSI knew this problem and release a new bios?

How to make the scrollbar function with mouse scroll wheel?

Is there a way how to make my content scroll even with the mouse scroll wheel?... I have to edit the coding??

Hey!
You shouldn't have to edit any code.
There is an active player bug surrounding this issue however, which causes the following:
1) It should work on windows.
2) It may not work on Mac.
We're continuing to pursue this issue, we know it's important to our users.
Thanks,
Tara

[K8N NEO3-F] Problem with USB keyboard and PS2 mouse after upgrading BIOS

Hello everyone!
I have upgraded BIOS from 1.1 to 1.4... I have Sempron 2600 (64bit) so BIOS v.1.1 did not recognise it.
The motherboard works, but after upgrading I have a small problem with my keyboard and mouse.
When I use USB keyboard my PS2 mouse doesn't work. When I connect PS2 keyboard mouse works!!!
Can you tell me what's wrong?
Thanks, bartull@
PS. Does BIOS v.1.3 recognise Sempron 64bit? Can you give me a link to it?

I think that the problem may have been caused by flashing either with liveupdate or with winflash. I had the problem when i used winflash correctly (shutting down all programs, checking all the boxes to clear bootblock and cmos) but had usb keyboard connected during flash. My suggestion is to reflash with floppy to last bios version that worked using only ps2 mouse and keyboard with the following instructions:
DOS floppy flash shall be performed with :
awfl833d.exe w7030nms.180 /py /sn /wb /cc /cd /cp /f /e
(Replace biosfilename with appropriate version for Neo1/neo2 etc , switches remain the same )
After flash is complete :
TURN OFF PSU (don't restart) wait 15 seconds
Turn on again , press the power button .
Enter BIOS and load optimized defaults (NO OTHER CHANGES) , save + exit
Boot the system again with the floppy in the drive to let the DMI pool build and update itself .
If that works, then reflash to the bios you tried before with the same procedure. Once you have stable system with ps2 keyboard and mouse working, re-enter bios and enable usb and keyboard support as a lot of bios' have it disabled by default for some strange reason.
Good luck.

Adobe Acrobat XI: PDF Portfolios - Mouse Scroll Wheel Non-Functional

This is a companion question to the one I just posted about the preview window, and it's much simpler.
Put bluntly, the wheel on my mouse does not work when positioned over the list of files in a PDF portfolio. I know it's not a problem with the mouse, because the wheel does work when I use an older version of Acrobat at my office via a remote desktop connection.
Any solutions? Is this just something new I'm going to have to live with?
Cheers,
Tom

I can replicate the issue with the scroll wheel. If you click on a file within the portfolio you can use the arrow keys to navigate.

PS2 mouse loosing wheel function when switching with KVM

Similar Messages

Maybe you are looking for