Pull List

Hi experts,
We are having the scenario of when we create the production order the reservation will be generated automatically. Based on the production order req qty stores will transfer the stock to production area. From that stock will be consumed to the production order.
For that i'm using MF60 t.code. I'm not able to generate the reservation here.
Can anybody tell me the process to create the reservation for pull list.
I made a settings for the plant with movement type 311 in OSPP.
Naren

Dear Naren,
1.Assume for the components in the production order the storage location mentioned is 0010 and assume the component stock is
zero for all the components during production order creation.
2.The system creates reservation for 261 movement for all the production order components once the order is saved and goods
movements against the order can be performed only after order release.
3.Assuming the availability check in activated for the order type during order creation,now the system displays the missing parts.
4.Based on this missing parts which can be checked in T.Code CO24,directly the stores person can transfer the missing parts to
production storage location90010) from central stores say 0020) through MB1B or else first you can create the stock transfer
reservation for the missing parts through T.Code MF60 and based on this reservation for 311 movement the actual stock transfer
posting can be performed.This gets transferred to production storage location.
While executing MF60,the input parameters are important to check the missing parts and then the staging can be performed.
Check and revert back with your queries.
Regards
Mangalraj.S

Similar Messages

How to use the Pull List in Discrete Scenario?

Hi Gurus,
I am using pull list MF60 in REM.
How to use the Pull List for creating material reservations in Discrete Scenario also?
Anyone used this Pull list in discrete, pl share.
How is helpful in discrete scenario?
Srini

Hello,
You can use Pull list for st.location transfers, if you are into WM managed then this pull list used a lot.
You can use the pulllist to the max. extent. But with IM managed plant the use is limited and this is used only for storage location transfers.
Issue cannot be done for Production orders. You can bring the materials to the req. storage locations and after that you have issue in the order or manually for the order.
Regards,
Manick.

Pull list for the component of the phantom assembly

Hi
I am in rem process. while doing the pull list for the fianl product using Entry with bom explosion.
i did not get the components (level 3)for 1 assembly(level 2 ) which is phantom one under the final product (level 1) BOM.
i also maintained the production stor loc for the components and the phantom assmy.
i check the stock in the production storage location . no stock is there in the location.
what is the problem . how to get the component of the phantom in the pull list.

Dear Raj,
If your FERT contains a HALB and inturn this HALB contains say HALB1 which is a phantom assembly
and and another 2 raw materials means,when you execute MF60 For HALB,you will get the 2 raw
materials along with the component's of phantom assembly.
Check and revert back.
Regards
Mangalraj.S

Pull list with 2 step transfer

dear SAPper,
We use pull list in the stock transfer,because the distance of staging area and raw material sloc is quite far (different block building) we must use two step movement type for transfer (303)
The inventory will post the reservation from pull list with mvt 303 into good in transit from raw material (1010) to 1020(staging area)
But some case is when the production order quantity increases and the production people create again pull list.
here is the problem :
the good is still in good intransit for staging area, pull list still create the whole quantity without consider that there is good in transit in staging area
the pull list should only create the remaining increases because some is already availablt in good in transit
is there any idea for the solution?
best regards,
freddy ha

no solution

Stock transfer using PICK LIST / PULL LIST

Hi Friend,
We have two storage locations in the plant say 1000 - Main store which is ware house managed and 2000 - Production storage location.
The goods issue needs to be done from production storage location 2000. How to transfer the material from 1000 - Main store which is ware house managed to 2000 - Production storage location using PICK LIST / PULL LIST concept.
Kindly give the solution.
Regards,
Narendra Bora

Hello Madhu,
If you can suggest me as well. I am moving the goods to production storage location from raw material storage lcoation,
While executing the MF60 it creates the reservation and display log
RMPU     stock transfer reservations 00000412 22.03.2010 created successfully
But does not move the goods using 311 movement type and stock is still in the raw material storage location.
2ndly in MMBE, if i found the stock in Produciton location, it shows me
Reserved                     20.000
GR blocked stock         20.000
Rcpt reservation          20.000
If you can enlighten me in this area please, Would it move the stock or I need to make some other steps also.
Regards,
JPS

How to create a push pull list?

I am trying to create a push pull list and thought there was some easy way to do this? I have looked everywhere and can't find anything about these.
I just want to be able to do something similar to the push pull found in the master detail wizard when you push columns over to display.
Do I need custom javascript for this?

Follow these steps in htmldb:
Create New Page
Form
Master Detail Form
Then select a table in your schema
There are 2 boxes below - available columns and displayed columns. You can use the buttons in the middle to push and pull (or add and remove).
This is what I call a push pull list and I assumed that as it was used here then the same functionality is available for use elsewhere (like in a wizard for an item maybe).
Hope this makes more sense

Material Pull List

Hi All,
Can anyone explain me what exactly mean Material Pull List?. What is the use of this list and what T-Code do we use to see the Material Pull List.
Thanks in advance

T.Code - MF60
Purpose
The pull list controls the in-house flow of material for supplying production with materials. The system assumes that the components required for production have already been produced in-house or procured externally and are now available to be transferred from main stores to the production storage location.
The pull list checks the stock situation at the production storage location and calculates the quantities of missing parts. Replenishment elements are created for these missing parts. Components are staged using stock transfer reservations.
Integration
The pull list is an integral part of repetitive manufacturing and shop floor control.
The basis of replenishment planning is MRP - the component requirements are calculated in the MRP run. The system takes requirements from run schedule quantities and manual reservations into account.
Prerequisites
The pull list is to be used in the scenario, where components are stored in Central stores & are then transferred to shop storage location for production. If the components are stored & consumed from same shop storage location only, then pull list is not applicable.
Constraints
It is not the primary task of the pull list to determine the location of the required components.
The pull list is primarily responsible for planning material staging (calculating missing parts and initiating replenishment) by creating stock transfer reservations in the form of replenishment elements. The actual staging is carried out by Central stores person.

PULL LIST IS NOT GETING EXPORTED TO XL FORMAT

Hi All,
PULL LIST IS NOT GETING EXPORTED TO XL FORMAT
PRINT IS DIRECTLY GOING TO PRINTER.
SO CAN YOU TELL ME HOW I CAN EXPORT THE PULL LIST TO XL
AND FOR THAT WHAT I HAVE TO DO...?
POINT WILL BE GIVEN.

Hi ,
If you have Crystal Reports Designer, try to export the report from the designer.
Because if it works fine from the designer it should work properly from the application.
And if it is working correctly from the designer and not from the application you can post your query to "Business Objects SDK Application" as the issue is from application not from the Crystal Reports Designer.
Thanks,
Sumit Kanhe

Goods Issue print for Pull list

All,
WHile doing Goods Issue by 201 mvt type one print format is coming .
So we are designing a format for that .
This print is coming thru output type WA03 .
Also while doing pull list (MF60) , one print document is coming .
Business wants a different format for that .
And for both transactions ,output type is WA03 .
How to tackle this situation ?
regards

Hello Sandeep,
I think this query is already addressed. Follow the steps in this post, if you still have problem write to this forum.
Goods Issue Print
Hope this helps.
Regards
Arif Mansuri

MF60 (Material staging) - Display different requirement dates in pull list

Hi
I've got the following problem.
If I choose a couple of process orders, the pull list of the material staging, summarize the quantitys and shows only just one requirement date. Instead I need the different orders and the different requirement dates to be shown for the consumption of components in the pull list.
Anybody know how to configure the pull list to show this scenario?
Thanks a lot.
Francisco O.

Hi,
When you make a pull list , the system will create reservations
for the components that comes from all the open orders collectively.
The reqmts date will be the earliest one.
Now you have to click the Blue lens in which the system will
show the reqmts of components arising from various orders separately and each orders reqmts date will be shown individually.
Regards,
nandha

Selection of default variant on MF60 pull list

Hello,
I am working in REM, using Pull list --MF60 in ECC 6.0
My requirement is to set default variant on the MF60 screen for a User ID.
The user will save his screen input in the variant and it is attached as default to the user profile.
When the user comes to MF60 screen , he need not have to select the variant.The variant will come automatically , as it is attached to the user id.
Is the above requirement possible?
PP experts , please let me know about the same.
Waiting for your reply.
Regards,
Ravindra

Go to MF60
On menu bar
Goto--> Variants --> get variant (here select variant)
Now again Goto --> Variants --> Save as variant
pls see if useful

Pull list issue

Hi,
My business process is make to stock - Discrete
I would like to post the material through Material list and pick list.I created Poduction order for FG.
but when i use to transfer the material through pull list (MF60), the componets are not appearing in the pull list.
I checked config. for material staging, it is assigned to plant correctly and material is non back flush, stock is available
What could be the issue Can you please clarrify.
Regards
Karthik

Dear
Please check the folliwing for this :
1.Did you extended the storage location(S) for those materials in Production order in MMSC if the material is
present in more than one ?? Issue Storage Location in MRP2 or in Production Version ??
2.Did you remove the mark under global settings not to include all requirements ,if you
are going to pull the materials for individual production order ??
3.Did you enter the requirement date ??
4.In Production Order /Process Order tab , componenet , do not mark Backflashing , Movement Allowed
5.Check the total selection in Global Setting -General setup and Dialogue Control
6.Check If your material is in Production Stoarege loacation where as you may be entering Raw material storage location ??
Regards
JH

MF60 - Pull list - TR to TO conversion fails if no inv. to pick from.

In MF60 pull list, the user is shown the requirement quantity and the component inventory in the PSA. They then set the quantities they want to be delivered and save, creating a Transfer request (TR). The TR is then converted to a Transfer Order (TO). The problem arises if there isn't sufficient inventory to pick from. The TR hangs and TO conversion fails. The user doesn't get their material and doesn't know there is a problem.
Is there a way to show IM inventory level in the Pull list selection screen in addition to the PSA inventory? I know it can be done 1 material at a time, but my users are pulling dozens of materials per pull list.
Can the pull list be modified to skip the TR and directly create a TO (I have immediate TO creation in the user global settings already) AND give the user an insufficient inventory error?
Is there a different way to solve this problem?

Hi John,
In MF60 you can see the req. date, net. req. qty, available stock & missing qty, does this not meet your need?
Regards,
Vivek

Pull list shortage qty list

Dear PP Gurus,
                      In Rem make to stock scenario, we stage the missing parts through pull list, In this report system shows shortage qty and available qty at prod storage location.
                        But our client want to see the available stock overview of warehouse collectivly of all components of Bom.
                        Is there any standerd report which can show the above reqmt or is there any other solution. please give the inputs in details.
Thanks & Regards
Dhananjay Kulkarni

Hi Dhananjay Kulkarni,
U can see the stock overview of each components at Pull list itself.
Goto Total requirement table of the Pullist(Top one) select the any one component ->Environment-> IM stock overview.
Like wise u can see the stock overview of all the components.
Please come back
Regards
Pradeep

Pull list in REM

Hi,
please suggest me what to do bit confused after going through the threads.
My scenario is like this:-
I HAVE TO TRANSFER OR ISSUE THE GOODS FOR PRODUCTION FROM THERE RESPECTIVE STORAGE LOC
I am working on REM make to stock scenario.
There is one FG and two SFG all together I am getting three planned order to execute on three different Production line (WC)
There are some SFG (halb) which is produced in one production line and used in another production line.
I am able to transfer the Raw material from main storage loc to Shop floor storage loc through PULL LIST and PICK LIST.
My problem starts when I try to transfer the SFG (halb) material to the other production line for production through PULL LIST.Here the issue storage loc and replenishment storage loc becomes same and system does not allow to proceed if the storage loc is same
I have three storage loc 1. A - for main store (RAW MATERIAL) 2. B - Shop floor storage loc (for production )3. C - for FG
My question is whether I am doing the right thing using PULL LIST and PICK LIST in this scenario.
if yes than how to do SFG transfer through PULL LIST and PICK LIST.
Is there any other way do the transfer I mean by MB1B manually.
Please revert back for more information
Regards
Kumar

Dear Kumar,
1.If my understanding is correct then pull list - MF60 is used to stage the materials as per the planned order quantity or as per
the BOM explosion(for the production quantity).
2.The system displays the required and the missing quantity for staging the components from one storage location to
production storage location.
3.If the main(issuing) and the production storage location is the same means then why do you expect to do a material staging
for the components?
check and revert back.
Regards
Mangalraj.S

Pull List

Similar Messages

Maybe you are looking for