Purchase email notifications?

Hi, there. I purchase a lot of music from ITunes and my parents are notified when I purchase something via email. They told me that they just delete the emails and they get a lot of them but they don't even care to read them & want me to turn off the notifications since I buy my own music now but I can't find any setting of that sort under my account settings. Please help
thanks.

Set up a rule in your email application to simply delete emails from "*iTunes Store <[email protected]>*" with a subject containing "*Your receipt*".

Similar Messages

  • Email Notification of Purchase Order

    Hi Gurus
    We are on SAP 4.7 doing an MM implementation.
    We have the following requirement: We have 2 levels of PO release. When the PO is created or changed, an email notification should be sent to the person responsible for 1st release. When the 1st release is carried out, then an email notification should be sent to the person responsible for 2nd release.
    Pls advise on how to get this going.
    Thanks in advance

    Hi,
    You need to look for releasing purchasing documents with workflow.
    http://help.sap.com/saphelp_47x200/helpdata/en/1d/ea9d9c7aca11d194b70000e82dec10/frameset.htm
    Here is how the workflow works.
    http://help.sap.com/saphelp_47x200/helpdata/en/1d/ea9d9c7aca11d194b70000e82dec10/frameset.htm
    Cheers
    Arun.

  • HT1491 I received notice we purchased an app at 3 in the morning.  Is there a way i can tell which device purchased it, and if it was purchased at that time or was the email notification delayed until that time

    Is there a way to tell if my kid actually downloaded something at 3am....or did the email notification just arrive then?
    Is there a way to tell which of my kids' devices downloaded the item?  (They share an account)

    Is there a way to tell if my kid actually downloaded something at 3am....or did the email notification just arrive then?
    Is there a way to tell which of my kids' devices downloaded the item?  (They share an account)

  • Why can't I set my downloaded .dm ringtones as text and email notifications?

    I have an HTC Incredible 2;  I paid for and downloaded several ringtones from the Verizon store, two of which I wanted to specifically use as the text and email notification sounds.  I then had the already discussed problem of not being able to find the newly downloaded ringtones immediately, but from the postings on here and the Adriod forums, I followed the directions to set up the folders titled Ringtones, Notifications, and Alarms on my sdcard, and moved the downloaded ringtones into their respective folders.  When I opened up the Personalize menu, under Sounds I was immediately able to find the ringtones I'd placed in the ringtone folder, but my phone wouldn't recognize the ringtons I'd placed in the Notifications folder.
    I downloaded the app Zedge, downloaded specific Notification sounds (.mp3, and they work).  I also downloaded .mp3 ringtones and then moved them into the Notifications folders, and THAT worked.  The problem seems to be that these are .dm files?  Is my phone unable to read .dm files as Notification sounds?  Or is there something I missed?  Something else I can do?
    I looked all over for software that will convert .dm files to .mp3, found a suggestion calling for the deletion of a couple of the lines of code from within the .dm file using Notebook ++, but that didn't work.  I don't remember seeing anywhere in the store that these ringtone files come in the protected .dm filetype; that many players will not be able to play them, and that I won't be able to use them for notification sounds?
    Ay one have any suggestions?  Verizon: am I doing something wrong?
    Thanks in advance for any help.

    Usually when you purchase ringtones from the Verizon store, you can only use them as ringtones. Since you have a smartphone, an app would be the best bet. You can find almost any song you're looking for in a free ringtone app, there's no need to purchase them.

  • Issue in User decision title in Email Notification

    Hi,
    We have used extended notification to send email notifications for PR, in User decision step I have used the decision title as "Purchase Requisition Decision for &". But when we schedule the SWN_SELSEN as a background job, in SOST email subject is not same as the User decision step title it is as "New work items in your Workflow inbox".
    Could you please let me know how to get the description same as User decision step.
    Thanks,
    Sriram.

    Hi Sriram,
    Please check General settigns of SWNCONFIG. Here check eliment 'SUBJECT_WF_INBOX'. Here its default value is NASWN070, which is nothing but the message of SWN class. Chcek Message No 70 of SWN class which states that ''New work items in your Workflow inbox'' which you are getting currently. Please provide your message instead of the standard one.
    Hope this will solve your problem.
    Regards,
    Smit

  • Is there a way to attach files linked in FormCentral form to email notifications?

    As part of my FormCentral form design, the end User is required to link a file (copy of Purchase Order). Is there a way of forcing this file to attach to the email notifications? I can obviously see the file attachments in the backend and download from there, but it would be preferable if I could deliver with the email notification to circumvent other processes.
    Any suggetsions?

    Sorry this is not possible to have the files attached to the email notification.
    Gen

  • Email notifications stuck in Mail status

    Hi,
    The notification mailer is up and running and we receive emails when we run the test. However, when a user goes through the application, lets say the Purchase requisition process, the process completes successfully, we see the notification in his worklist, we see the notification in the wf_notifications table with status of MAIL, but the user does not get the email notification. The email address is defined both on the employee record and on the user record. The background process is running but it doesn't pick up the notification. After a while the notification gets expired.
    does anyone have any clue as to why the test notification from the mailer works but we don't get an email when we go thru the requisition process although it completes successfully ?
    Any help is appreciated.
    Regards
    Preeti

    There are various aspects to troubleshooting this issue.
    Let me explain the mailer architecture in a nutshell and then troubleshooting tips.
    1. Notification activity in a workflow process is executed by the engine. The activity makes an entry in WF_NOTIFICATIONS table with appropriate values for RECIPIENT_ROLE, SUBJECT and MAIL_STATUS based on recipient's notification preference.
    2. At the same time, an business event is raised for that notification and enqueued on to the WF_DEFERRED queue.
    3. The Workflow Deferred Agent Listener dequeues the event, builds a XML message for that notification and enqueues it again to WF_NOTIFICATION_OUT queue.
    4. Workflow Notification Mailer polls the WF_NOTIFICATION_OUT queue and when a message arrives, it dequeues it, parses the XML for that notification and builds a MIME message. Sends the MIME message to the intended recipient_role's e-mail address.
    In summary the message for e-mail goes like this...
    Ntf Activity -> WF_DEFERRED -> WF_NOTIFICATION_OUT -> Notification Mailer Now things to check.
    1. Is the Deferred Agent Listener or Deferred Notification Agent Listener running?
    2. Is the Notification Mailer running with Correlation ID parameter set to null? Because the mailer could be configured to only process e-mail notifications from a specific Item Type.
    3. Is the intended RECIPIENT_ROLE's e-mail address and notification_preference values in WF_ROLES view correct? The email address should be valid and notification preference should be MAIL%.
    There is a debug script $FND_TOP/sql/wfmlrdbg.sql. Run this for the given notification id and you will be able to see in which queue the message is stuck.
    Hope this helps.

  • I am trying to turn off email notifications that I get every time I use my apple ID

    Got a new iPAd mini for Xmas.
    I am CONSTANTLY getting email notifications when I used my apple ID.  How do I turn this off?  I understand it is a security feature but I am trying to learn how to operate my new iPad mini and am constantly entering the info to figure things out.  Please tell me how to turn it off.  I have been to the apple ID page (Apple - My Apple ID) but I see nothing that allows me to do anything like turning off or down email notifications.
    I have googled it but that has led me to a page that asks me to create a new ID although it didn't say as much.  I have now created an ID I didn't want to and also need to delete it as I have no desire to receive all the spam I am sure will come from it.
    PLZ help!

    You cannot delete an Apple ID, just abandon the new one that you created if you do not need it or want it.
    Why don't you explain some of the circumstances under which you are getting these email notifications. You need to describe what you are doing when these pop up. I assume that you mean when you try to make purchases, so if tha the cae, please confirm. If not, please explain in greater detail also, what is the nature/message of the email notifications?

  • Purchase Order notification

    Hi All,
    Whenever a supplier clicks on the reply-to in response to a purchase order notification from his mail box the mail goes to the Generic workflow mailer id. I have a requirement like whenever the supplier replies to a PO mail notification it should always go to the buyer of that PO. It would be great if someone could give guidance on how to acheive this.
    Regards,
    Girish.

    To add to my earlier comment;
    The lag is because of 2 reasons.
    1) The workflow background processor is running every x minutes. So it takes time to process the po approval workflow.
    2) The notification mailer is running every y minutes. So after a notification is created, it takes y minutes to actually send an email out.
    You can avoid the delay caused by step1, you can set PO:Workflow Processing Mode to ONLINE. This will process the approval right away (instead of waiting for the workflow background process to run.)
    However, you will find that users don't like this option because they have to stare at the hour glass for a few seconds while the PO is being processed.
    Hope this helps
    Sandeep Gandhi
    Omkar Technologies Inc.
    Independent Techno-functional Consultant
    513-325-9026

  • Workflow did not trigger the email notification to approver inbox

    Hi SAP Gurus,
    SRM 5.0
    Extended Classic Scenario
    CCM 2.0
    Query : Work Flow triggers the professional purchaser PP in approval previw of SC  but there is no email sent to the PP inbox.
    No email notification is sent to the Professional purchaser inbox.
    Can any one advice on this to locate the error.
    Regards,
    Jayoti

    Many thanks all Specially Sravanan & Laurent
    The issue has been resolved now . The problem was RFC Configuration was not setup for workflow in SWU3.
    Problem : Email was not triggering in professional purchaser and approver inbox even though we can see I the approval preview screen at the portal
    Solution : The work item step was not generating  for Agent determination.
    In Automatic Workflow Customization ( SWU3 ), Configure RFC Destination under Maintain Runtime Environment was not enabled.
    Basis Team  ran  Perform Automatic Workflow Customizing button situated adjacent to Execute button. And the status for Configure RFC Destination changed from Red cross to Green Tick.
    In Automatic Workflow Customization ( SWU3 ) -> Maintain Runtime Environment -> Configure RFC Destination
    There were some more options below were in Crossed red status :-
    We selected the particular step below and Right Click -> Auto- Customizing
    1)     Schedule Background Job for Missed Deadlines
    2)     Schedule Background Job for Work Items with Errors
    3)     Schedule Background Job for Condition Evaluation
    4)     Schedule Background Job for Event Queue
    5)     Schedule Background Job for Event Queue
    Regards,
    Jayoti

  • USER EXIT: Email notification after PO creation

    Hi everyone!
    May I know if there exists a User Exit / BAdI in this following scenario:
    1. An email notification outside SAP is sent whenever there is a creation of PO (Purchase Doc)?
    Please advise if this is possible.
    Points will be rewarded for useful suggestions.
    Thank you very much in advance!
    Regards,
    Reymar
    Edited by: Reymar Ellazo on Apr 17, 2008 10:32 AM

    Instead of User-Exit/BADI use Output type technique. Via Output Type you can send notification mail. Discuss on the same with your functional consultant.

  • Track GRN with Email Notification

    Dear All,
    We have different users who are doing MIGO and MIRO. Users who are doing MIRO need Email notification when GRN is done.
    This E mail need to be sent for GRN in respective plant and User name who has done to the respective user for MIRO.
    We cannot send E mail on check as some errors might be left. This has to be sent while GRN is posted.
    Please guide on the relevant Table/fields and  User Exit or BADI to trigger the event.
    Regards,
    Vikas

    Hi,
    There a standard SAP functionality to send mail to buyer , i.e.purchase group
    You have to configure output MLGR in Inventory management , in PO you will GR message tick on delivery tab
    May be you can map purchase groups in the user ids of MIRO user
    Explore further
    Thanks
    Diwakar

  • Need to include invoice note in workflow email notification

    Hi,
    I need to include the notes entered by user in invoice notes tab while parking the invoice
    when the workflow is triggered , workitem is created for the purchase personnel and the email notification for his workitem should contain the text written by the finance person in notes tab of the invoice while parking the document
    I  found out the table where the name of this text for the invoice is stored. Its STXH. The text name is invoice number and fiscal year
    I  created workflow element invoicetext and concatenated invoice number and fiscal year in it and passed it to the task of the workitem.
    I put the following statement in the description of the workitem as per the entries in table STXH.
    /: INCLUDE &INVOICENOTE& OBJECT RBKP ID 0001
    but the text is not showingup in the description of the task when the workflow is instantiated. I also checked the funcion module READ_TEXT, all parameters are correct.
    Could you please advice me what could be the problem ?
    thanks
    R

    Hello Rita,
    Prior to the Mail step, use an activity step in workflow by calling a method.. in that method use READ_TEXT and get the required value into a container element and pass it back to Workflow, then you will be able to use INCLUDE to add that container element to your body of the mail.
    Try the above process and if not we can look for other options.
    Thanks,
    Sudhir.

  • Email Notification When Specific In/Outbound Queue Is Blocked

    We are running an integrated environment of ECC and SRM with qRFCs to transfer data, such as a Purchase Requisition, from ECC to SRM system (no XI / PI in the landscape). Sometimes the entries in the queue would be stuck and block the queue from being further processed. We would like to have email notification sent out to responsible persons when that happens. In particular, we would like email notification to be sent out when BBP_EXTREQ_TRANS entry is blocking the queue.
    I have read the following blog and think it is a promising general approach.
    /people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
    I have however two questions regarding the approach:
    1) The blog has the presumption that XI is involved. XI/PI is not part of our landscape.
    2) Can we customize the alerting mechanism further by specifying the queue name for alert to be sent out?
    Thanks.

    Hi Ashish,
    Hope you are familiar with WLST please grab ideas from the following beautiful site, which delivers you a lot.
    1.Sending Email Alert for WebLogic Servers Current State &amp;laquo; Middleware Magic
    2.http://middlewaremagic.com/weblogic/?p=5177
    3.http://middlewaremagic.com/weblogic/?p=5582
    4. http://middlewaremagic.com/weblogic/?p=7042
    First of all why do you allow your servers getting down? If it is often then you need to raise an SR with Oracle. If not tune the parameters according to your environment.
    Thanks,
    Karthik

  • Email notification for SC

    Hi Gurus,
    How do  I restrict the email notification for a Shopping cart which requires only to be sent to the users depending upon the Purchase group assigned to the user.
    At present the SC email notification approval is going for all the users.
    Appreciate if any body can tell me how to configure this in SRM 7.0
    Rrds,
    Shiva

    Hi,
    There is single user field filter in /SAPSRM/OFFLINEAPPROVALSEND program. If it is blank, all users are selected.
    You can copy or enhance the program to handle Purchasing Group.
    Add Purchasing Group input field and select users.
    Regards,
    Masa

Maybe you are looking for