Quality view, inspection type fiels to be determined in the table of mtrl

Hello Experts,
in my project i have more then 80000 material loaded in the system, and my client wants a report on all the spares and engineering material for which particular inspection type not maintained.
say X is the inspection type in and it is not maintained in N no of materials, hence i want the list from list i have tried to check in MARA table with PSTAT field, there i can found out which all material have quality view active, but how to find out 1 particular field in the view is what my requirement is.
i even checked table TQ30T, but cld not find any thin in tat, also tried SQVI, but no success.
please help.
thanks and regards,
YK

Hello,
Check table MARC.
If MARC - QMATV field = 'X', then some inspection setup is maintained for this material. So you can put exclude condition and find the materials without inspection setup.
Or,
You can check table QMAT where Inspection type - material - plant data can be found.
Here you get only those materials for which the data is maintained.
regards

Similar Messages

IDoc type could not be determined for the IDoc

I am trying to Post the payment run through the transaction F110.
In the payment run log i get the following message:
"IDoc type could not be determined for the IDoc"
But in fact the IDoc is generated and it is displayed in We05.
I have configured the Message type PAYEXT-PEXR2002 and EUPEXR-IDCREF01 both for the partner.
Has anybody Idea about why this error is coming and how i can resolve this?
This is important because in Payment run log, they need to know the IDoc number generated for that run, else it may become difficult for user to identify which IDoc was created for a particular payment run.
Would appreciate if anyone can please help on the same.
Thanks & Regards,
Narayanan

Hi,
If you are paying the payment through F110, if the payment exceeds the limit what you are spefied in available amounts in FI12 screen. First Please check this screen.
still if you are having any problem
Check in the below path:
IMG- Financial Accounting (New) - Accounts Receivable and Accounts Payable - Business Transactions - Release for Payment - 1. Create Workflow Variant for Release for Payment
2. Assign Release Approval Procedure for Release for Payment
3. Define Users with Authorization to Payment Release
Thanks
Chandra

IDoc type could not be determined for the IDoc in F110

Dear All,
The below mentioned error is encountered by us in F110.We have check all the setiing and not able to find the solution for this error.
Now our heads has gone for a toss....can anyone kindly suggest what and where we have missed out.
The system is not creating the IDOC file.....
IDoc type could not be determined for the IDoc
Message no. B1090
Diagnosis
The IDoc passed to the ALE layer could not be processed. The specifications passed in the control record were not correct.
The basic IDoc type (field EDIDC-IDOCTP on the outbound side or EDI_DC-IDOCTYP on the inbound side)has not been specified for this IDoc.
The attempt to read the basic IDoc type from table EDIDO also failed. No table entry was found for IDoc type from field DOCTYP.
Procedure
Possible error sources:
- The calling program did not provide values for the fields specified above correctly. Make a note of the transaction in which this error occurred and consult your ALE administrator.
- The IDoc type is not known in your system and must be maintained.
Kindly do the needful.
Regards

If you want to create IDocs from the proposal run, outbound parameters (we20) with the 'Test' flag are required in addition.
see OSS note 504230 : Message EUPEXR forms the logical unit around the individual payment messages (PAYEXT IDocs). The E1IDRD1 segments contain the IDoc numbers of the payment messages in field DOCNUM. Segment E1IDRS1 contains check sums (total of all amounts, account numbers, bank numbers, number of payment messages). This information is provided for the EDI subsystem. Set up EUPEXR In Transaction WE20 for the partner profile for the house bank, create the outbound parameters for message type EUPEXR with IDoc type IDCREF01. If you want to create IDocs from the proposal run, outbound parameters with the 'Test' flag are required in addition.

Inspection types to be defaulted based on the Material Types

Hi Guys,
Do we have any specific setting to maintain the Inspection Type to be defaulted based on the Material Type.
For Example:We have inspection Type 01& 07.....This Inspection Type has to be defaulted to the One material Type when ever we are creating the material.
Pl suggest me.
Regards
Kumar

Dear in Standard SAP it is not possible.
check this relevant thread : DEFAULT VALUE OF INSPECTION TYPE IN MATERIAL MASTER.
Cheers
KK

Condition type not flown(not determined) into the sales order

Hello Experts,
There is one discount condition type which is having proper condition records, validity date.However, it is not getting determined properly and is not flown into the sales order. the user wants to know why this may happen.I tried to reason it may be the sales order date and the conditon record date may be different or the condition record is changed after the creation of the sales order.neither of the reasons seem to hold good. any ideas?
Regards,
Raj

Hello,
I have looked into the analysis and asked him to update the condition by clicking on that.also, I found that the condition record is having a proper valid date. now the user would update only after knowing the exact reason why it did not flow into the sales order,he knows he has to update the condition but would not do so till he knows the right reason why condition is not determined in the sales order. now this is the situation.
the probable reasons as per analysis of the conditon type are as follows(for your information). can it be one ofThere are different reasons for this:
1)The condition was deleted manually in the item condition screen.
2)The condition record was created later. Please note that order processing and pricing have buffer mechanisms. This means that a newly added condition record might only be found after order processing has been left completely and then started again. them?
Regards,
Raj.

Posting to quality while inspection type is deactivated !!

Hi Gurus,
I'm facing a strange issue, I have activated insp. type 04 on some materials. then for certain reasons I deactivated it again.
Now, what is happening is that, when we receive process orders (with old dates, earlier than the date of deactivation), then system posts the quantity to quality inspection, and don not create inspection lots, while if I received orders with dates after the date of deactivation, the system posts them normally to unrestricted.
Now, posting these quantities in quality is making a very big problem, is there a way to stop this?
Regards,
MaX
Edited by: MaX_00 on Jul 6, 2010 8:14 PM

Edit the older process orders. Go to the GR tab. Change the posting from quality stock to unrestrcited.
Deactivating the 04 has no impact on existing orders. Once created, they have to be be changed or deleted and recreated.
FF

Associative array type for each blob column in the table

i am using the code in given link
http://www.oracle.com/technology/oramag/oracle/07-jan/o17odp.html
i chnages that code like this
CREATE TABLE JOBS
JOB_ID VARCHAR2(10 BYTE),
JOB_TITLE VARCHAR2(35 BYTE),
MIN_SALARY NUMBER(6),
MAX_SALARY NUMBER(6),
JOBPIC BLOB
CREATE OR REPLACE PACKAGE associative_array
AS
-- define an associative array type for each column in the jobs table
TYPE t_job_id IS TABLE OF jobs.job_id%TYPE
INDEX BY PLS_INTEGER;
TYPE t_job_title IS TABLE OF jobs.job_title%TYPE
INDEX BY PLS_INTEGER;
TYPE t_min_salary IS TABLE OF jobs.min_salary%TYPE
INDEX BY PLS_INTEGER;
TYPE t_max_salary IS TABLE OF jobs.max_salary%TYPE
INDEX BY PLS_INTEGER;
TYPE t_jobpic IS TABLE OF jobs.jobpic%TYPE
INDEX BY PLS_INTEGER;
-- define the procedure that will perform the array insert
PROCEDURE array_insert (
p_job_id IN t_job_id,
p_job_title IN t_job_title,
p_min_salary IN t_min_salary,
p_max_salary IN t_max_salary,
p_jobpic IN t_jobpic
END associative_array;
CREATE OR REPLACE package body SHC_OLD.associative_array as
-- implement the procedure that will perform the array insert
procedure array_insert (p_job_id in t_job_id,
p_job_title in t_job_title,
p_min_salary in t_min_salary,
p_max_salary in t_max_salary,
P_JOBPIC IN T_JOBPIC
) is
begin
forall i in p_job_id.first..p_job_id.last
insert into jobs (job_id,
job_title,
min_salary,
max_salary,
JOBPIC
values (p_job_id(i),
p_job_title(i),
p_min_salary(i),
p_max_salary(i),
P_JOBPIC(i)
end array_insert;
end associative_array;
this procedure is called from .net. from .net sending blob is posiible or not.if yes how

Ok, that won't work...you need to generate an image tag and provide the contents of the blob column as the src for the image tag.
If you look at my blog entry -
http://jes.blogs.shellprompt.net/2007/05/18/apex-delivering-pages-in-3-seconds-or-less/
and download that Whitepaper that I talk about you will find an example of how to do what you want to do. Note the majority of that whitepaper is discussing other (quite advanced) topics, but there is a small part of it that shows how to display an image stored as a blob in a table.

How to include Quality Mgt View - Inspection Setup- InspType and Active

Friends,
I am working on MM data conversion. I am using STD RMDATIND program for this. I need to update fields in View Quality management, Inspection Type and Active check box. We could achieve this through Quality management -> Inspection Set up->click on New button. Here you can maintain the InspType and Active button. My problem is that I am not able to find the corresponding fields in program RMDATIND. Any suggestions will be greatly appreciated.
Thanks,
Sujith.

Dear YOGINI B. THORAT,
Thank you very much for correct suggestion,
We have resolved our issue of materials which were unable to move the stocks from quality stock to Unrestricted stocks,
Thanks,

No quality notification type has been defined for inspection type 89

Hi
When I am creating a manual inspection lot and want to create a quality notification it gives me this error "No quality notification type has been defined for inspection type 89" where do I assign the notifications to the inspection lot.???
I want to know where do I configure it??
Regards
Suresh

Hi
Path for assigning the Qualtiy notification type to Qualtiy inspection type:
SPRO--> Qualtiy Mangement --> Qualtiy inspection --> Inspection lot creation -->
Maintain Inspection types.
Select the inspection type and goto details screen
You can find notification type field in the details.Give the value and Save.
Regards
Ramakrishna

Inspection types and Specifications

Dear Experts,
                   I am new to QM. My scenario is, during the process, in-process inspection will be done and finally finished good will go to finished good stock. In the finished good stock everyday at random some materials will be taken up for testing. Apart from this when a customer wants a material, that material will be checked again before dispatch and often with added specifications.
My question is-
            a) what inspection types should I maintain in QM view of material master for the random checking of finished good in finished good stock and pre-dispatch special checking for a customer ?
           b) How can the requirement of checking added specifications for some customers be addressed ?
           c) Do I have to create the inspection lots in above 2 cases manually or is it possible to automate to some extent like automatic generation of inspection lot whenever a finished good is transferred from finished good stock to say, a storage location created for stocks to be supplied against customer orders ?
Regards,
Sunit

Dear Sir,
              I tried as suggested by you and faced following problems.
u201CYou can take auto/mass UD for the rest of lots & inspect only those which you want to inspect Randomly__u201D
When I use 04 inspection type and do final inspection, from u201Cedit/copy inspection resultsu201D I am only able to copy inspection result lot by lot and then do usage decision. How can auto result recording (f possible) and UD for multiple lots be done at same time?
u201Cu2026or for inspection lot origin 89 design 90 inspection type as :Random lot from Production.u201D
I could not find design 90 inspection type. I found inspection type 89 and assigned it to the finished material . Then I made a process order for the material , did final inspection (through inspection type 04) and took the material in unrestricted stock. Thereafter I transfer a part of the the material to another storage location in the same plant through mb1b (movmt type 313). In the new storage location that part of the material is available under u201Cstorage location transferu201D heading but it is not coming to u201Cquality inspectionu201D under that storage location. Naturally in qa32 no inspection lot is seen. How to ensure that the material comes to quality inspection under the new storage location and inspection lot is seen in qa32 for testing?
u201CHow can the requirement of checking added specifications for some customers be addressed ?
This can be achieved by either 10 or 02 Inspection type.
A lot is generated after you carry out the outbound delivery to customer that is during dispach.u201D
I am using strategy 40and MTS (order made without refernce to sale order), so can I use inspection type 11 to get same result ?
Also, even if the lot is generated during dispatch how can I add the u201Cextrau201D specificns relevant to that customer ?
Please suggest.
Regards,
Sunit

Setting Inspection Type value automatically during material creation

Hi Experts,
I want to set the Inspection Type field ( MM01/MM02->Quality view ->inspection set up ) value depending upon plant .
Lets say for plant 0100 Inspection Type- GR100
for plant 0110 Inspection Type - GR110
Can this be done through SPRO or if we need to implement it through User exits/ badi .
Thanks in advance

Hi,
I guess defaulting is not possible. Copy the existing material and create a new one so that the inspection type is also copied.
Check the link
http://forums.sdn.sap.com/thread.jspa?messageID=9803039#9803039
Regards
Ayyallas
Edited by: ayyallas on Feb 22, 2012 12:51 PM

Inspection type assignment

Hi All,
I am an MM consultant, i am trying to learn QM, I want to know if there are one more than one inspection types assigned for inspection lot origin, then which inspection type the system will pick up while creating automatic inspection lots
Thanks in advance
regards
Venkat.

Hi
You can use Variant of The Inspection Lot Origin to assign several inspection types to one inspection lot origin.
A variant 01 must exist for each inspection lot origin. The system then always chooses the inspection type defined as variant 01, if no control specifies another inspection type.
You can choose another inspection type as the preferred inspection type if you do not want to use the inspection type specified as variant 01 for the inspection lot origin. This is done in the inspection setup of the material master (quality management view).
The system can use the following special controls to select an alternative inspection type:
Inspection lot origin 01 (goods receipt for a purchase order)
       a.Inspection type based on the status of the supply relationship
       b.Inspection type for a source inspection based on the info record for the
          supply relationship.
       c.Inspection type for an inspection during external processing based on the
          external processing data in the task list or order operation.
Inspection lot origins 03, 13, 14 (production or plant maintenance)
                Inspection type from the order type
Inspection lot origins 10, 11, 12 (shipping)
                Inspection type dependent on the delivery category
If the required inspection type is not active, an inspection lot is not created.
Path for creating Variant of The Inspection Lot Origin :
<i><b>SPRO --> QM -> Qulatiy inspection --> Inspection lot creation --> Maintain Inspection Lot Origins and Assign Inspection Types</b></i>
In this node select the inspection lot Origin and go to Inspection types for the origin, where you can define Variant.
Regards
Ramakrishna

Inspection Type 05

Hi Everybody,
I would like to know how the inspection plan for Inspection Type "05" will be differentiated from the inspection plan for Inspection Type "01".
When system creates an inspection lot for inspection type "05" then how does the system know that it has to pick up the inspection plan corresponding to "05" Inspection Type. (There is no usage defined for it).
Thanks - Asad

Hi
Inspection lot orgin:
01 Goods receipt Automatic or manual.
05 Miscellaneous goods receipt Automatic or manual
Inspection lot :
01 Goods receipt inspection for a purchase order once we do Goods Receipt for purchase order ( If QM view of material active and Inspection lot 01 : active for material )
System automatically create Inspection lot.
05 Inspection for other goods receipt
If Goods receipt carried out against other.
And 05 type active for material
System automatically create inspection lot.
Even we can create manually Inspection lot also with T : code : QA01.
and Yes we maintain quality inspection usage in Inspection lot orgin
T : code : Spro
Quality management>> quality inspection >>>Inspection lot creation >>>Maintain inspection type.
Hope ths help
Please reward points
Sunil Singh

Table for stoing the inspection type of a material

Hi,
I want to know is there any table which stores the value Inspection Type of a material such as 03,zwork maintained in the qualitty view of it.
plzz provide me guidelines to solve this problem.

Hi,
In standard inspection type field is ' Art ' . Check QALS table where you can find this field & if 03 inspection type is maintained it will store in qals table.
Regards,
Himanshu

Inspection type 04 should not generate Insp.lot for specific Process orders

Hi Guyes,
I Want to skip the Inspection lots generation for specific process orders of a particular material during Goods Reciept and stock should be directly posting in to Un-restricted stock.
In the material master assigned with Inspection type 04.
Please advise me the possible options to map this scenario.
regads,
Rao

In QDR1
stage 10-click on insp stage
stage 10
no. of insp : 5
new insp stage : 20
rej : 1
new insp stage : 10
stage 20 - tick on skip
stage 20
no. of skip : say "5"
new insp stage : 10
rej : 1
new insp stage : 10
Now use this DMR in Header of inspection plan of material of process order.
what this will do is after 5 inspections it will skip the next 5 inspection lots.
Make sure :
You can maintain setting for "maximum skip duration in plant level.
In QM view click on Skip & auto UD
Create variant in QA16 & run through QA17
Here in QA17 maintain the duration after which you want to take UD
Also make sure that in selected set maintain stock posting proposal for unrestricted.

Quality view, inspection type fiels to be determined in the table of mtrl

Similar Messages

Maybe you are looking for