Queries for benchmark test
Hi. I'm creating a benchmark for Oracle 10g. I'd like to know if anybody knows a site, or a documentation, or information about all the queries that are most used in benchmark tests and how many record I have to apply this tests to have a good test. I appreciate!
You may find this posting helpful for using free benchmark tool for oracle.
http://www.oraclepoint.com/topic.php?filename=166&extra=page%3D1 (register and then log in because it's only available for members.)
There are step-by-step installation guide and sample report of TPC-C.
Hope it helps.
Similar Messages
-
Poor performance by Matlab and Windows benchmark tests
Hello
I have a Lenovo Thinkpad W520 with Windows 7 64bit installed. Compared to other Notebooks with comparable hardware, my Lenovo is very slow. To prove my thought, I carried through a Matlab (64bit) benchmark test and the Windows 7 benchmark test. In both tests, my Lenovo was worse than the other notebooks. During the tests I set the Power Manager to performance and activated the Lenovo turbo boost.
Now I want to ask, if there are any settings, perhaps in the bios, to speed the laptop up? Or why result such a bad performance although the hardware is very good?
Thanks for your help
Solved!
Go to Solution.Thank you very much for your reply!
I dated up the BIOS from version 1.27 to 1.32. Now the benchmark tests all look great!!
Thanks -
Performance issues in bootcamp with Passmark benchmark test
I wonder if anyone can shed some light on this
I've got a Win XP 32bit SP3 installed on bootcamp. When i test this using the passmark benchmark test (latest version on a 30 day trial). I get poor CPU performance. I am running a 2.53 13" MacBook Pro. I can compare the results with other peoples results from the passmark database, by same CPU and also by other macbooks.
My scores are nearly half what other similar macbooks are showing in CPU Math, which is quite a difference.
So i wonder what's up, and how can i check it further? Half sounds like only one CPU running.
I've compared VMFusion and Bootcamp as well and there's not much in them, both results are showing around half the performance. (This is Fusion running the bootcamp install. A free windows install in Fusion shows slightly better results but not that much)
Any pointers or help would be great, for example is there some way under OS X i can check the performance of the macbook as a baseline?
Is there something i've not done whilst installing Win XP through book camp?
thanks in advance!
paulMaybe until software catches up and is patched to work with Intel 3000 plus 6970M.
Apple did get early jump on Sandy Bridge +
Can't find the thread from someone else (thanks for making searching threads so clumbersome)
AMD Mobility
http://support.amd.com/us/gpudownload/windows/Pages/radeonmob_win7-64.aspx
And for Nvidia 320M users:
http://www.nvidia.com/object/notebook-win7-winvista-64bit-275.27-beta-driver.htm l
3DMark06 will almost surely I suppose need a patch.
I'd hit the web sites for PC laptop gaming if you can.
http://www.bing.com/search?q=6970M+3DMark06
http://www.notebookcheck.net/Intel-HD-Graphics-3000.37948.0.html
This should be right now your alley -
http://forums.macrumors.com/showthread.php?t=1101179&page=2
http://www.bing.com/search?q=6970M+with+Intel+3000+graphics
Most of this type stuff is at your fingertips with a little searching. -
SQL queries for finding values in 4 different tables
I need to have certain queries to find specific data in this table, this is just an example table, but I will use the same ideas for my actual website and database.
customers (customerID: integer, fName: string, lName: string)
items (itemID: integer, description: string, price: float)
orders (orderID: integer, itemID: integer, aID: integer, customerID: integer, date: date)
addresses (aID: integer, housenum: integer, streetName: string, town:string, state: string, zip:integer)
Values I need to find are
List the town, first name, and last name of any customer who has shipped an item to the same town as another customer.
Return the average amount of money each customer spent in March of 2013. (Note that the answer will be a single number
List the first and last names of all customers who have had the same item shipped to at least two different addresses.
List the top two states that have generated the most total revenue and the revenue they generated
I did try a few different queries, for #3 I tried
SELECT customers.fName,
customers.lName,
COUNT(orders.itemID) AS `total items with diff address >= 2`
FROM customers
JOIN (SELECT customerID,itemID,
COUNT(DISTINCT aID) AS diff_address
FROM orders
GROUP BY orders.itemID
HAVING diff_address >= 2
) AS orders
ON orders.customerID = customers.customerID
but I only got 1 result, and I do not think thats correct.
Thanks for the help and I appreciate you taking the time to help meWhy not post the sample data + desired result? Always state what version you are using.
SELECT lname,A.aID,COUNT(*) cnt FROM customers C JOIN orders O ON c.Customerid=O.Customerid
JOIN address A ON A.aID=O.aID
GROUP BY lname,aID
Sorry cannot test it right now...
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
About: BOEXI3.1 Sizing and Benchmark test
Hi Guru,
Does any of you have the Sizing Guide or Sizing Tool for BOE XI R3.1?
And I also need some benchmark test paper from 3rd party organization or other customers.
Thanks.
Michael GaoWhat error messages do you get when you run them?
Have you tried compiling them with the "-deprecation" option
this can provide more information (when compiling) about things that
are no longer supported. Although if you arn't getting any errors
on compilation that probably isn't going to be your problem.
matfud -
I think there should be a flash card app that let's u put in ur own info. I'm studying for a test and I think it would be really cool to have my flash cards in my phone!! Is there an app like that already?
http://www.appshopper.com/education/flashcards
-
Not getting BI query variable selection screen for few test users
Hi,
i am having problem when i am executing the reports. i am not getting variable screen for the test users ID's. but i am getting the screen when when 0BI_ALL authorization selected.
i want role based authorization, and not complete authorization.
the parameters in su01 are scl(X) and wlc(X X XX X)
Thanks,Can you please check into Infoobject Maintenance screen in Bex Tab i.e. Query Execution Filter Value Selection. assign "Values from Masterdata Table".
Try again and let me know.
Nagesh Ganisetti. -
Suggestions requested for Unit Testing process and build processes.
Hi All,
We are using WebLogic WorkShop 8.1 SP2 to build our WebApp. One thing I am trying
to get together is a "Best Practises" list for aspects of WorkShop developement,
particularly Unit Testing, Continous Build methodology, source control management
etc.I have been through the "Best Practises Guide" that comes in WorkShop help,
but it doesnt address these issues.This could help us all for future projects.
1)Could anyone give pointers on how to perform Unit Testing using either JUnit/JUnitEE
in the WorkShop realm, given that Controls cannot be accessed directly from PO
Test classes.
2)For a project of size say 5 developers ,does it make sense to have a nightly
build using tools like CruiseControl?We use CVS for our source control and its
working out pretty well, but given that we currently have no Unit Tests that can
be run after the build and that can provide some reports on what broke/what didnt?
I am sure we all would appreciate any suggestions and more questions on this topic.
Thanks,
Vik.Hi, Chris,
can you perhaps explain your solution in greater detail. I am really curious to
find a way to test controls.
"Chris Pyrke" <[email protected]> wrote:
>
I have written (well it's a bit of a dirty hack really) something that
lends itself
to the name ControlTest (it unit tests controls). Its a blend of Junit
and Cactus
with some of the source of each brutalised a bit to get things to work
(not much
- it was a couple of hours work, when I was supposed to be doing something
else).
To write a control test you code something like...
package com.liffe;
import com.liffe.controlunit.ControlTestCase;
import controls.Example;
public class TestExample extends ControlTestCase
private Example example = null;
public void setUp() {
example = (Example)getControl("example");
public void testExample() {
this.assertNotNull(example);
String result = example.getData();
assertEquals(result, "Happy as Larry");
Other tasks required to set up a test are creating a web project with
a jpf which
needs some cut and paste code (14 lines) in its begin method and a jsp
which is
also cut and paste (5 lines). (ie create a standard web project and paste
in 2
pieces of code)
In the web project you need to create a control (A) with an instance
name of controlContainer.
(if it's called something else the pasted in code will need changing
to reflect)
In this control you need to put an instance of TestContainerImpl and
any controls
that need testing.
You then need to add a method to the control (A) that looks like…
* @common:operation
public String controlTestRun(String theSuiteClassName, boolean xsl)
container.setControl("example", example);
return container.controlTestRun(theSuiteClassName, xsl);
You need to call container.setControl for each control being tested and
the object
'container' is the instance name of the TestContainerImpl that was put
in.
There are 4 jars (junit, cactus etc) that go in the library. You will
also need
the ControlUnitBase project (or maybe just it's jar).
To use you call a URL like:
http://localhost:7001/TestWeb/Controller.jpf?test=com.liffe.TestExample
TestWeb is the name I gave to my web project - this will be different
for each
test project
com.liffe.Example is the class above and will therefore be different
for each
test case.
You can also call
http://localhost:7001/TestWeb/Controller.jpf?test=com.liffe.TestExample&xsl=true
(Note the extra &xsl=true) and the browser will (if it can) render it
more prettily.
This seems to do the job quite nicely, but there are several caveats
I would hope
someone from bea would be able to address before I start using it widely.
1) To access the control you need to create it (eg as a subcontrol in
the control
(A) above.
To get it into the test case you need to pass it round as an Object (can't
return
Control from a control operation). As it's being passed around among
Java (POJO)
classes I'm assuming that control remains in the control container context
so
this is OK. It seems to work and the Object is some form of proxy as
any control
seems to be reproxied before the control is invoked from the test case.
2) If I'm testing controls called from a JPD then they either need to
be in a
control project (and my test cases called from a Web Project) which makes
for
a large increase in project numbers (we already have this and are trying
to resist
it) To avoid this - as a process project is a brain damaged web project
I simply
perform some brain surgery and augment the process project with some
standard
files found in any old web project. this means I can call the test JPF
from a
browser. This seems nasty, is there a better way?
3) I would like to be able to deliver without the test code. At the worst
the
code can be in place but must be inacessible in a production environment.
I don't
know how best to do this - any suggestions (without creating lots of
projects,
or lots of manual effort)
If anyone has read this far I would ask the question does this seem like
the kind
of thing that would be useful?
Hopefully a future version of workshop will have something to enable
unit testing
and this hacking will be unnecessary.
Could someone from BEA tell me if this is a dangerous way to do things?
Chris
"vik" <[email protected]> wrote:
Hi All,
We are using WebLogic WorkShop 8.1 SP2 to build our WebApp. One thing
I am trying
to get together is a "Best Practises" list for aspects of WorkShop developement,
particularly Unit Testing, Continous Build methodology, source control
management
etc.I have been through the "Best Practises Guide" that comes in WorkShop
help,
but it doesnt address these issues.This could help us all for future
projects.
1)Could anyone give pointers on how to perform Unit Testing using either
JUnit/JUnitEE
in the WorkShop realm, given that Controls cannot be accessed directly
from PO
Test classes.
2)For a project of size say 5 developers ,does it make sense to have
a nightly
build using tools like CruiseControl?We use CVS for our source control
and its
working out pretty well, but given that we currently have no Unit Tests
that can
be run after the build and that can provide some reports on what broke/what
didnt?
I am sure we all would appreciate any suggestions and more questions
on this topic.
Thanks,
Vik. -
Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding. However when I close Nunit, the page is back to be normal. The title is returned to the name of website without "not responding". I sure this problem did not happen on Firefox version 26. I just got this problem when firefox upgrading automatically to version 27. Please help me fix this problem because it is very important for my work. If you need more information pls send your concerns via my email address.
Thanks so muchHi, the work around suggested above should put you in working mode in the meantime. However to help investigate the issue it is possible to analyze what is not loading or taking a long time by analyzing the network traffic or http headers of the Nunit web page.
*[https://addons.mozilla.org/en-us/firefox/addon/live-http-headers/]
*Web developer Tools > Web console
If you post the results with out the user data, we are happy to help. -
Queries for current Qtr and prior quarter
If I select one date in dashboard prompt in one column I want to display current quarter revenue and prior Qtr revenue.
Could anyone give me the queries for the current Qtr and prior Qtr?
So I will going to use presentation variable from the dashboard promptsobiee-date-expressions-reference
Date Calculation OBIEE Expression Explanation :
First Day of the Previous Year
TIMESTAMPADD( SQL_TSI_YEAR , -1, TIMESTAMPADD( SQL_TSI_DAY , EXTRACT( DAY_OF_YEAR FROM CURRENT_DATE) * -(1) + 1, CURRENT_DATE)) From right to left the first TIMESTAMPADD returns the first day of the current year. The second TIMESTAMPADD removes a year from the returned date for the First Day of the Previous Year.
First Day of the Current Year
TIMESTAMPADD( SQL_TSI_DAY , EXTRACT( DAY_OF_YEAR FROM CURRENT_DATE) * -(1) + 1, CURRENT_DATE) This calculation returns the first day of the year by deducting one less than the total number of days in the year.
First Day of the Next Year
TIMESTAMPADD( SQL_TSI_YEAR , 1, TIMESTAMPADD( SQL_TSI_DAY , EXTRACT( DAY_OF_YEAR FROM CURRENT_DATE) * -(1) + 1, CURRENT_DATE)) From right to left the first TIMESTAMPADD returns the first day of the current year. The second TIMESTAMPADD adds a year to the date returned which will give the first day of the next year.
First Day of the Previous Month
TIMESTAMPADD(SQL_TSI_MONTH, -1, TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( CURRENT_DATE) * -(1) + 1, CURRENT_DATE)) From right to left the first TIMESTAMPADD returns the first day of the Current Month. The second TIMESTAMPADD then subtracts one month from the first day of the Current Month arriving to the First Day of the previous month.
First Day of the Current Month
TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( CURRENT_DATE) * -(1) + 1, CURRENT_DATE) This expression gets the current day of the month and subtracts one less than the current day to arrive at the first day of the month.
First Day of the Next Month
TIMESTAMPADD(SQL_TSI_MONTH, 1, TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( CURRENT_DATE) * -(1) + 1, CURRENT_DATE)) From right to left the first TIMESTAMPADD returns the first day of the Current Month. The second TIMESTAMPADD then adds one month from the first day of the Current Month arriving to the First Day of the next month.
First Day of Current Quarter
TIMESTAMPADD( SQL_TSI_DAY , DAY_OF_QUARTER( CURRENT_DATE) * -(1) + 1, CURRENT_DATE) This was included to show the calculations discussed above can be used with other functions. This is the same expression as the one that returns the first day of the current month except this one uses the DAY_OF_QUARTER property to return the first day of the current quarter.
Last Day of the Previous Month
TIMESTAMPADD( SQL_TSI_DAY , -(1), TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( CURRENT_DATE) * -(1) + 1, CURRENT_DATE)) From right to left the first TIMESTAMPADD returns the first day of the Current Month. The second TIMESTAMPADD subtracts a month to arrive at the first day of the previous month.
Last Day of Current Month
TIMESTAMPADD( SQL_TSI_DAY , -(1), TIMESTAMPADD( SQL_TSI_MONTH , 1, TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( CURRENT_DATE) * -(1) + 1, CURRENT_DATE))) From right to left the first TIMESTAMPADD finds the first day of the current Month. The second TIMESTAMPADD adds one month to the date to arrive at the first day of the next month. The final TIMESTAMPADD subtracts one day from the returned date to arrive at the last day of the Current Month.
Last Day of the Next Month
TIMESTAMPADD( SQL_TSI_DAY , -(1), TIMESTAMPADD( SQL_TSI_MONTH , 2, TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( CURRENT_DATE) * -(1) + 1, CURRENT_DATE))) From right to left the first TIMESTAMPADD finds the first day of the current Month. The second TIMESTAMPADD adds two months to the date to arrive at the first day of month after next. The final TIMESTAMPADD subtracts one day from the returned date to arrive at the last day of the Next Month.
Last Day of Previous Year
TIMESTAMPADD( SQL_TSI_DAY , -1, TIMESTAMPADD( SQL_TSI_DAY , EXTRACT( DAY_OF_YEAR FROM CURRENT_DATE) * -(1) + 1,
CURRENT_DATE)) From right to left the first TIMESTAMPADD returns the first day of the current year. The second TIMESTAMPADD subtracts one day to arrive at December 31st of the previous year.
Last Day of Current Year
TIMESTAMPADD(SQL_TSI_YEAR, 1, TIMESTAMPADD( SQL_TSI_DAY , -1, TIMESTAMPADD( SQL_TSI_DAY , EXTRACT( DAY_OF_YEAR FROM CURRENT_DATE) * -(1) + 1, CURRENT_DATE))) From right to left the first TIMESTAMPADD returns the first day of the current year. The second TIMESTAMPADD deducts one day to arrive at December 31 of the previous year. The third TIMESTAMPADD adds a single year to the date to arrive at December 31 of the Current Year.
Last Day of the Next Year
TIMESTAMPADD(SQL_TSI_YEAR, 2, TIMESTAMPADD( SQL_TSI_DAY , -1, TIMESTAMPADD( SQL_TSI_DAY , EXTRACT( DAY_OF_YEAR FROM CURRENT_DATE) * -(1) + 1, CURRENT_DATE))) From right to left the first TIMESTAMPADD returns the first day of the current year. The second TIMESTAMPADD deducts one day to arrive at December 31 of the previous year. The third TIMESTAMPADD adds 2 years to the date to arrive at December 31 of the Next Year.
Last Day of Current Quarter
TIMESTAMPADD( SQL_TSI_DAY , -(1), TIMESTAMPADD( SQL_TSI_QUARTER , 1, TIMESTAMPADD( SQL_TSI_DAY , DAY_OF_QUARTER( CURRENT_DATE) * -(1) + 1, CURRENT_DATE))) Demonstrated using Quarters. From right to left the first TIMESTAMPADD returns the first day of the Current Quarter. The second TIMESTAMPADD returns the first day of the next quarter. The final TIMESTAMPADD subtracts a single day from the date to arrive at the last day of the Current Quarter.
Number of days between First Day of Year and Last Day of Current Month TIMESTAMPDIFF(SQL_TSI_DAY, CAST('2010/01/01 00:00:00' AS DATE), TIMESTAMPADD( SQL_TSI_DAY , -(1), TIMESTAMPADD( SQL_TSI_MONTH , 1, TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( CURRENT_DATE) * -(1) + 1, CURRENT_DATE)))) For simplicity I hard coded the January 1, 2010 date and CAST it to a date. I could have used the First Day of the Current Year calculation but didn’t want to over clutter the example. The second part of the TIMESTAMPDIFF uses Last Day of the Current Month calculation to force the TIMESTAMPDIFF to calculate the number of days between the first day of the year and the last day of the current month.
=============
FYI, let say some example,
Last day of previous Quarter:
"GPC_DataMart"."GPC_DataMart"."dbo"."LQ_Position"."Business_Date"=TIMESTAMPADD( SQL_TSI_DAY , -(1), TIMESTAMPADD( SQL_TSI_DAY , DAY_OF_QUARTER( "GPC_DataMart"."GPC_DataMart"."dbo"."MT_BUSINESS_DATE"."Business_Date") * -(1) + 1, "GPC_DataMart"."GPC_DataMart"."dbo"."MT_BUSINESS_DATE"."Business_Date"))
Last month last day:
"GPC_DataMart"."GPC_DataMart"."dbo"."LM_Position"."Business_Date"=
TIMESTAMPADD( SQL_TSI_DAY , -(1), TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( "GPC_DataMart"."GPC_DataMart"."dbo"."MT_BUSINESS_DATE"."Business_Date") * -(1) + 1, "GPC_DataMart"."GPC_DataMart"."dbo"."MT_BUSINESS_DATE"."Business_Date"))
Last year Last day
"GPC_DataMart"."GPC_DataMart"."dbo"."LY_Position"."Business_Date"=
TIMESTAMPADD( SQL_TSI_DAY , -1, TIMESTAMPADD( SQL_TSI_DAY , EXTRACT( DAY_OF_YEAR FROM "GPC_DataMart"."GPC_DataMart"."dbo"."MT_BUSINESS_DATE"."Business_Date") * -(1) + 1, "GPC_DataMart"."GPC_DataMart"."dbo"."MT_BUSINESS_DATE"."Business_Date"))
Thanks and Regards,
Deva
http://obieeelegant.blogspot.com/2011/06/obiee-date-expressions-reference.html -
Hi Friends,
I Have a view named - item_sales with 4 column
Item code
Item name
Transaction_YYYYMM (Date stored in YYYYMM format )
QTY_RECEIVED
QTY_SOLD
Sample data is
ITEM_CODE ITEM NAME TRANSACTION_YYYMM QTY_RECD QTY_SOLD
AX TSHIRT 201307 3000 2000
AX TSHIRT 201308 2000 500
AX TSHIRT 201309 1000 3000
CX XLSHIRT 201307 3000 2000
CX XLSHIRT 201308 3000 2500
CX XLSHIRT 201309 3000 2500
EVERY MONTH END I WILL RUN THIS QUERY TO FIND OUT THE BELOW DETAILS
1. TO FIND ITEM_NAME WISE - QTY_RECEIVED AND QTY_SOLD ( FOR CURRENT MONTH - EXAMPLE SEP )
2. TO FIND ITEM_NAME WISE - QTY_RECEIVED AND QTY_SOLD (FOR CURRENT YEAR EXAMPLE FROM JAN TO SEP )
OUTPUT FOR SEPTEMBER MONTH LOOK LIKE THIS
SEP-MONTH JAN TO SEP
ITEM_CODE ITEM_NAME QTY_RECEIVED QTY_SOLD QTY_RECEIVED QTY_SOLD
AX TSHIRT 1000 3000 6000 5500
CX XLSHIRT 3000 2000 9000 7000
Pls advise me how to write queries for this
RdkJust FYI, you *can* edit your own posts, you know
Rdk wrote:
Transaction_YYYYMM (Date stored in YYYYMM format )
First "problem". Don't store dates as string. Store them as dates. It will save you so much headache don't the road you won't believe it.
True, this is a view, so maybe not as critical - assuming the underlying *DATA* is actually a date.
1. TO FIND ITEM_NAME WISE - QTY_RECEIVED AND QTY_SOLD ( FOR CURRENT MONTH - EXAMPLE SEP )
2. TO FIND ITEM_NAME WISE - QTY_RECEIVED AND QTY_SOLD (FOR CURRENT YEAR EXAMPLE FROM JAN TO SEP )
So yeah, based on these requirements, I'd recommend you make that column a DATE, not a string. Dates are easier to parse for date-related logic - such as month by month as you need here.
Using that, here's one way to do it:
with w_data as (
select 'AX' item_code, 'TSHIRT ' item_name, to_date('20130701','yyyymmdd') trans_dt, 3000 qty_recd, 2000 qty_sold from dual union all
select 'AX' , 'TSHIRT ' , to_date('20130801','yyyymmdd') , 2000 , 500 from dual union all
select 'AX' , 'TSHIRT ' , to_date('20130901','yyyymmdd') , 1000 , 3000 from dual union all
select 'CX' , 'XLSHIRT' , to_date('20130701','yyyymmdd') , 3000 , 2000 from dual union all
select 'CX' , 'XLSHIRT' , to_date('20130801','yyyymmdd') , 3000 , 2500 from dual union all
select 'CX' , 'XLSHIRT' , to_date('20130901','yyyymmdd') , 3000 , 2500 from dual
w_base as (
select item_code, item_name, trans_dt, qty_recd, qty_sold,
sum(qty_recd) over (partition by item_code, trunc(trans_dt, 'MM')) mm_recd,
sum(qty_sold) over (partition by item_code, trunc(trans_dt, 'MM')) mm_sold,
sum(qty_recd) over (partition by item_code, trunc(trans_dt, 'YY')) yy_recd,
sum(qty_sold) over (partition by item_code, trunc(trans_dt, 'YY')) yy_sold,
row_number() over (partition by item_code order by trans_dt desc) rnum
from w_data d
Select item_code, item_name, mm_recd, mm_sold, yy_recd, yy_sold
from w_base
where rnum = 1
IT ITEM_NA MM_RECD MM_SOLD YY_RECD YY_SOLD
AX TSHIRT 1000 3000 6000 5500
CX XLSHIRT 3000 2500 9000 7000 -
Hi
We are migrating from old domain to new domain. Before live migration, we are trying to check the ACE/ACL migration through SubInACL. We are running the SubInACL on a cluster, which is a member of the Old Domain (Test Domain). We are able to resolve and
ping both Old Domain and the New domain from this cluster machine. We have created a network share on this cluster, which is accessible to all Domain Users of the Old Domain. Both Domains have two way forest level trust. we are trying to migrate
the ACL of this share (\\ClusterMachine\testshare$) to the new domain using SubInACL. We are trying to run the below command to get it done.
subinacl /outputlog=C:\Users\Administrator\Desktop\Migrationlog.txt /subdirectories
\\ClusterMachine\testshare$\*.* /migratetodomain=OldDomain=NewDomain=mappingfile.txt
Mapping file contains : Domain Users=NewDomain_Users
But we are geeting the Error that "1210 could not find a domain controller for domain "Test Domain". Error finding domain name : 1210 the format of the specified computer name is invalid. Current Object "\\ClusterMachine\testshare$"
will not be processed."Hello,
how in detail is DNS set up in each domain?
Any problems when using nslookup to verify?
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter: -
Best practice for the test environment & DBA plan Activities Documents
Dears,,
In our company, we made sizing for hardware.
we have Three environments ( Test/Development , Training , Production ).
But, the test environment servers less than Production environment servers.
My question is:
How to make the best practice for the test environment?
( Is there any recommendations from Oracle related to this , any PDF files help me ............ )
Also please , Can I have a detail document regarding the DBA plan activities?
I appreciate your help and advise
Thanks
Edited by: user4520487 on Mar 3, 2009 11:08 PMFollow your build document for the same steps you used to build production.
You should know where all your code is. You can use the deployment manager to export your configurations. Export customized files from MDS. Just follow the process again, and you will have a clean instance not containing production data.
It only takes a lot of time if your client is lacking documentation or if you re not familiar with all the parts of the environment. What's 2-3 hours compared to all the issues you will run into if you copy databases or import/export schemas?
-Kevin -
Best Practice - Hardware requirements for exchange test environment
Hi Experts,
I'm new to exchange and I want to have a test environment for learning, testing ,batches and updates.
In our environment we have co-existence 2010 and 2013 and I need to have a close scenario on my test environment.
I was thinking of having an isolated (not domain joined) high end workstation laptop with (quad core i7, 32GB RAM, 1T SSD) to implement the environment on it, but the management refused and replied "do it on one of the free servers within the live production
environment at the Data Center"... !
I'm afraid of doing so not to corrupt the production environment with any mistake by my configuration "I'm not that exchange expert who could revert back if something wrong happened".
Is there a documented Microsoft recommendation on how to do it and where to do so to be able to send it to them ??
OR/ Could someone help with the best practice on where to have my test environment and how to set it up??
Many Thanks
Mohamed IbrahimI think this may be useful:
It's their official test lab set up guide.
http://social.technet.microsoft.com/wiki/contents/articles/15392.test-lab-guide-install-exchange-server-2013.aspx
Also, your spec should be fine as long as you run the VMs within their means. -
We are in the middle of OAKS TESTING. We had to run the latest Java Updates inorder to do the ELPA portion of our State "OAKS" testing. Since last Friday we cannot consistantly or basically cannot get the audio portion to work. The sound and speech works fine in system preference but no longer for the testing. It was fine last week.
Is there other school district having this issue in the state of Oregon?When I try to do a "save as" in preview, pages, numbers, etc., there no longer is a save as in the pull down menu. If a go to help and type save as it will pop up under help - what a pain.
Save as is available in Mountain Lion by hitting the Option key while you access the File menu. (It was returned after being eliminated in Lion).
My system is running slow!
How much RAM do you have installed? Mountain Lion is somewhat of a memory hog. And, how much free/empty hard drive space do you have?
And what is Mavericks? Is that going to change everything?
Apple announced a new OS a few days ago; it is supposed to be released in the fall.
When i open softwares, like quickbooks, it tells me that my QB wants to import my contacts.
The capability to sync is a new feature. You don't need to do it. I did not allow any app to import my contacts. You can also turn off other features if you do not like them - simply go through all the System Preference Panes and decide what you want and what you don't want.
Maybe you are looking for
-
Auto GR creation against PO after consumption of material in Process order.
Hi GURU's My client is asking about automate GR against Purchase Order when he confirm the porcess order of GR consume material means when he confirm the process order, the GR is created for the comsume material( GR must be equal to consume qnty) aga
-
How to use select a vi function inside a loop?
I am modifying the notifier basics part 2.vi to send a notifier to each of 64 sub-vi's. How can you use the 'select a vi' function inside a loop for 64 iterations to access the individual filenames?? Attachments: Notifier_BASICS_Part_2.vi 87 KB
-
Live migration Vnic on hosts randomly losing connectivity HELP
Hello Everyone, I am building out a new 2012 R2 cluster using VMM with converged network configuration. I have 5 physical nics and teaming 3 of them using dynamic load balancing. I have configured 3 virtual network adapters in host which are for ma
-
Hi. I was trying to take out the SIM card. When I put the upin into that miniscule slot at the top of the phone, the black sim carrier popped out and I did not immediately see it (it fell in my lap) while the sim card ended in my hand. Not knowing th
-
UCCX 9 editor won't install on non default drive (and run)
I have a large secondary drive on my workstation that I install programs on. Have put the various CCX editors over there with no problems in the past. OS is W7 64 bit. When installing CCX editor 9.0.2, it installs, but will not start. Finally figu